Search

The DNA origami technique offers precise positioning of nanoscale objects with high accuracy. This has facilitated the development of DNA origami-based functional nanomechanical devices that enable the investigation of DNA–protein interactions at the single particle level. Herein, we used the DNA origami technique to fabricate a nanoscale device for studying DNA bending proteins. For a proof of concept, we used TATA-box binding protein (TBP) to evaluate our approach. Upon binding to the TATA box, TBP causes a bend to DNA of ∼90°. Our device translates this bending into an angular change that is readily observable with a conventional transmission electron microscope (TEM). Furthermore, we investigated the roles of transcription factor II A (TF(II)A) and transcription factor II B (TF(II)B). Our results indicate that TF(II)A introduces additional bending, whereas TF(II)B does not significantly alter the TBP–DNA structure. Our approach can be readily adopted to a wide range of DNA-bending proteins and will aid the development of DNA-origami-based devices tailored for the investigation of DNA–protein interactions.

Funding Information: Funding from the Jane and Aatos Erkko Foundation (J.J.T. and A.K./M.V.-R.) and the Academy of Finland (#330584 and #350797 J.J.T./#308992 A.K. and A.K.N./#330896 M.V.-R.) is gratefully acknowledged. The authors also acknowledge the provision of facilities and technical support by Aalto University at OtaNano - Nanomicroscopy Center (Aalto-NMC). Publisher Copyright: © 2023 The Royal Society of Chemistry. Hierarchical self-assembly of nanostructures with addressable complexity has been a promising route for realizing novel functional materials. Traditionally, the fabrication of such structures on a large scale has been achievable using top-down methods but with the cost of complexity of the fabrication equipment versus resolution and limitation mainly to 2D structures. More recently bottom-up methods using molecules like DNA have gained attention due to the advantages of low fabrication costs, high resolution and simplicity in an extension of the methods to the third dimension. One of the more promising bottom-up techniques is DNA origami due to the robust self-assembly of arbitrarily shaped nanostructures with feature sizes down to a few nanometers. Here, we show that under specific ionic conditions of the buffer, the employed plus-shaped, blunt-ended Seeman tile (ST) origami forms elongated, ordered 2D lattices, which are further rolled into 3D tubes in solution. Imaging structures on a surface by atomic force microscopy reveals ribbon-like structures, with single or double layers of the origami lattice. Further studies of the double-layered structures in a liquid state by confocal microscopy and cryo-TEM revealed elongated tube structures with a relatively uniform width but with a varying length. Through meticulous study, we concluded that the assembly process of these 3D DNA origami tubes is heavily dependent on the concentration of both mono- and divalent cations. In particular, nickel seems to act as a trigger for the formation of the tubular assemblies in liquid.

Funding Information: The research of A.E., A.M., and P.O. was supported by Academy of Finland grant 311639. A.K. and A.K.N. have been supported by Academy of Finland grant 308992. The research of I.K. was supported by Japan Society for the Promotion of Science (JSPS) Early-Career Scientists 18K18144, Fund for the Promotion of Joint International Research (B) 19KK0261, and Young Researcher Dispatch Program (School of Engineering, Tohoku University). The research of A.M. was additionally supported by NSF-DMS (grant numbers 1800443/1764366) and Nokia Foundation (2017). The research of Y.S. has been supported by JSPS Grant-in-Aid for Scientific Research (KAKENHI; grant numbers 18K19831 and 19H04201). The research of L.O. and F.C.S. was supported by European Research Council grant agreement no. 694410, project AEDNA. Publisher Copyright: © 2022 The Authors. Published by American Chemical Society. We address the problem of de novo design and synthesis of nucleic acid nanostructures, a challenge that has been considered in the area of DNA nanotechnology since the 1980s and more recently in the area of RNA nanotechnology. Toward this goal, we introduce a general algorithmic design process and software pipeline for rendering 3D wireframe polyhedral nanostructures in single-stranded RNA. To initiate the pipeline, the user creates a model of the desired polyhedron using standard 3D graphic design software. As its output, the pipeline produces an RNA nucleotide sequence whose corresponding RNA primary structure can be transcribed from a DNA template and folded in the laboratory. As case examples, we design and characterize experimentally three 3D RNA nanostructures: a tetrahedron, a triangular bipyramid, and a triangular prism. The design software is openly available and also provides an export of the targeted 3D structure into the oxDNA molecular dynamics simulator for easy simulation and visualization.

openaire: EC/H2020/101030869/EU//ROBOT Sensing Funding Information: This work was supported by the Academy of Finland (grants 308992 and 324352). J.L. gratefully acknowledges financial support from the Marie Skłodowska-Curie Actions Individual Fellowship grant agreement number 101030869 (“ROBOT sensing”). M-K.N. acknowledges support by Ho Chi Minh City University of Technology (HCMUT), VNU-HCM. Publisher Copyright: © 2022 The Authors. Published by American Chemical Society. Since its discovery in 2006, the DNA origami technique has revolutionized bottom-up nanofabrication. This technique is simple yet versatile and enables the fabrication of nanostructures of almost arbitrary shapes. Furthermore, due to their intrinsic addressability, DNA origami structures can serve as templates for the arrangement of various nanoscale components (small molecules, proteins, nanoparticles, etc.) with controlled stoichiometry and nanometer-scale precision, which is often beyond the reach of other nanofabrication techniques. Despite the multiple benefits of the DNA origami technique, its applicability is often restricted by the limited stability in application-specific conditions. This Review provides an overview of the strategies that have been developed to improve the stability of DNA-origami-based assemblies for potential biomedical, nanofabrication, and other applications.

openaire: EC/H2020/713645/EU//BioMEP Aptamers have emerged as versatile affinity ligands and as promising alternatives to protein antibodies. However, the inconsistency in the reported affinities and specificities of aptamers has greatly hindered the development of aptamer-based applications. Herein, we present a strategy to characterize aptamers by using DNA origami-based chiral plasmonic assemblies as reporters and establishing a competitive hybridization reaction-based thermodynamic model. We demonstrate the characterization of several DNA aptamers, including aptamers for small molecules and macromolecules, as well as aptamers with high and low affinities. The presented characterization scheme can be readily adapted to a wide selection of aptamers. We anticipate that our approach will advance the development of aptamer-based applications by enabling reliable and reproducible characterization of aptamers.

Funding Information: This work was supported by the Academy of Finland (Grants 308992 and 324352) and the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement 713645. J.R. was partially funded by the Academy of Finland Flagship Programme, Photonics Research, and Innovation (PREIN), Decision Number 320167. Publisher Copyright: © 2022 American Chemical Society. All rights reserved. Reliable characterization of binding affinities is crucial for selected aptamers. However, the limited repertoire of universal approaches to obtain the dissociation constant (KD) values often hinders the further development of aptamer-based applications. Herein, we present a competitive hybridization-based strategy to characterize aptamers using DNA origami-based chiral plasmonic assemblies as optical reporters. We incorporated aptamers and partial complementary strands blocking different regions of the aptamers into the reporters and measured the kinetic behaviors of the target binding to gain insights on aptamers' functional domains. We introduced a reference analyte and developed a thermodynamic model to obtain a relative dissociation constant of an aptamer-target pair. With this approach, we characterized RNA and DNA aptamers binding to small molecules with low and high affinities.

DNA nanotechnology offers a versatile toolbox for precise spatial and temporal manipulation of matter on the nanoscale. However, rendering DNA-based systems responsive to light has remained challenging. Herein, we describe the remote manipulation of native (non-photoresponsive) chiral plasmonic molecules (CPMs) using light. Our strategy is based on the use of a photoresponsive medium comprising a merocyanine-based photoacid. Upon exposure to visible light, the medium decreases its pH, inducing the formation of DNA triplex links, leading to a spatial reconfiguration of the CPMs. The process can be reversed simply by turning the light off and it can be repeated for multiple cycles. The degree of the overall chirality change in an ensemble of CPMs depends on the CPM fraction undergoing reconfiguration, which, remarkably, depends on and can be tuned by the intensity of incident light. Such a dynamic, remotely controlled system could aid in further advancing DNA-based devices and nanomaterials.

openaire: EC/H2020/101030869/EU//ROBOT Sensing Orientational control of anisotropic plasmonic nanoparticles is an attractive proposition to generate dynamic plasmonic responses. Particularly, the use of light as a stimulus to modulate the orientation is extremely useful owing to its spatiotemporal operative ability. This work showcases a light-mediated approach to tune the orientational features of gold nanorods in DNA-engineered hydrogel materials. The strategy relies on the use of visible-light-induced photothermal effects to cause deformation of the hydrogel matrix, resulting in temperature-controlled polarization-dependent optical responses whose anisotropy features are highly adaptive to the nature of DNA crosslinks. The visible-light-mediated approach showcased here can open novel avenues to create dynamic light-responsive materials with reconfigurable plasmonic responses.

DNA nanotechnology offers a versatile toolbox for precise spatial and temporal manipulation of matter on the nanoscale. However, rendering DNA‐based systems responsive to light has remained challenging. Herein, we describe the remote manipulation of native (non‐photoresponsive) chiral plasmonic molecules (CPMs) using light. Our strategy is based on the use of a photoresponsive medium comprising a merocyanine‐based photoacid. Upon exposure to visible light, the medium decreases its pH, inducing the formation of DNA triplex links, leading to a spatial reconfiguration of the CPMs. The process can be reversed simply by turning the light off and it can be repeated for multiple cycles. The degree of the overall chirality change in an ensemble of CPMs depends on the CPM fraction undergoing reconfiguration, which, remarkably, depends on and can be tuned by the intensity of incident light. Such a dynamic, remotely controlled system could aid in further advancing DNA‐based devices and nanomaterials., The spatial configuration and optical properties of non‐photoresponsive DNA‐origami‐based plasmonic assemblies can be controlled with light using a photoresponsive medium. Upon exposure to visible light, the medium's pH decreases, inducing the formation of DNA triplex links in the plasmonic assemblies, leading to their spatial reconfiguration, which can be reversed by turning the light off.

The DNA origami technique has emerged as one of the most versatile bottom-up nanofabrication methods due to its ability to construct well-defined complex three-dimensional nanostructures and guide assembly of functional nanoscale objects with unprecedented precision, high yields, and controlled stoichiometry. Nonetheless, limited compatibility with biologically relevant fluids and typical solvents utilized in nanofabrication often restricts applications of DNA origami-based assemblies and devices. Here we present an approach for coating DNA origami structures with silica. By careful adjustment of experiment parameters, we achieved reproducible growth of ultrathin silica shell in solution without agglomeration or deformation of DNA origami structures. The silica-coated structures are stable in water and exhibit an increased resistivity to nuclease-mediated degradation. In addition, the coated structures preserve their structural integrity in polar organic solvents. We anticipate that our results will aid further advancement of DNA origami techniques as the nanofabrication method.

Understanding how the geometrical property of chirality is transferred into the physical properties of chiral materials is becoming increasingly important in various research fields, including plasmonics. Advances in DNA nanotechnology, especially DNA origami techniques, have enabled routine fabrication of complex chiral plasmonic assemblies. However, most of the work undertaken to date has involved plasmonic enantiomers. The concept of multiple chiral centers in stereochemistry provides simple guidelines for generating multiple chiral configurations beyond enantiomers. In this issue of ACS Nano, Wang et al. report DNA origami-based assembly and characterization of reconfigurable plasmonic chiral stereoisomers with up to three chiral centers. In this Perspective, we explore the implication of these results for further development of functional chiral plasmonic systems.

Sliding is one of the fundamental mechanical movements in machinery. In macroscopic systems, double-rack pinion machines employ gears to slide two linear tracks along opposite directions. In microscopic systems, kinesin-5 proteins crosslink and slide apart antiparallel microtubules, promoting spindle bipolarity and elongation during mitosis. Here we demonstrate an artificial nanoscopic analog, in which gold nanocrystals can mediate coordinated sliding of two antiparallel DNA origami filaments powered by DNA fuels. Stepwise and reversible sliding along opposite directions is in situ monitored and confirmed using fluorescence spectroscopy. A theoretical model including different energy transfer mechanisms is developed to understand the observed fluorescence dynamics. We further show that such sliding can also take place in the presence of multiple DNA sidelocks that are introduced to inhibit the relative movements. Our work enriches the toolbox of DNA-based nanomachinery, taking one step further toward the vision of molecular nanofactories., Kinesin, a motor protein, moves along filaments in a walk-like fashion to transport cargo to specific places in the cell. Here, the authors developed an analogous, artificial system consisting of nanoparticles moving along DNA filaments.

Nature has developed striking light-powered proteins such as bacteriorhodopsin, which can convert light energy into conformational changes for biological functions. Such natural machines are a great source of inspiration for creation of their synthetic analogues. However, synthetic molecular machines typically operate at the nanometre scale or below. Translating controlled operation of individual molecular machines to a larger dimension, for example, to 10–100 nm, which features many practical applications, is highly important but remains challenging. Here we demonstrate a light-driven plasmonic nanosystem that can amplify the molecular motion of azobenzene through the host nanostructure and consequently translate it into reversible chiroptical function with large amplitude modulation. Light is exploited as both energy source and information probe. Our plasmonic nanosystem bears unique features of optical addressability, reversibility and modulability, which are crucial for developing all-optical molecular devices with desired functionalities., Controlled operation of individual molecular machines on a larger scale, 10-100 nm, remains challenging. Here, Kuzyk et al. demonstrate a light-driven plasmonic nanosystem that can amplify the molecular motion of azobenzene through a host nanostructure and translates it into reversible chiroptical response.

The specificity and simplicity of the Watson–Crick base pair interactions make DNA one of the most versatile construction materials for creating nanoscale structures and devices. Among several DNA-based approaches, the DNA origami technique excels in programmable self-assembly of complex, arbitrary shaped structures with dimensions of hundreds of nanometers. Importantly, DNA origami can be used as templates for assembly of functional nanoscale components into three-dimensional structures with high precision and controlled stoichiometry. This is often beyond the reach of other nanofabrication techniques. In this Perspective, we highlight the capability of the DNA origami technique for realization of novel nanophotonic systems. First, we introduce the basic principles of designing and fabrication of DNA origami structures. Subsequently, we review recent advances of the DNA origami applications in nanoplasmonics, single-molecule and super-resolution fluorescent imaging, as well as hybrid photonic systems. We conclude by outlining the future prospects of the DNA origami technique for advanced nanophotonic systems with tailored functionalities.

Accurate and reliable biosensing is crucial for environmental monitoring, food safety, and diagnostics. Spatially reconfigurable DNA origami nanostructures are excellent candidates for the generation of custom sensing probes. Here we present a nanoscale biosensing device that combines the accuracy and precision of the DNA origami nanofabrication technique, unique optical responses of chiral plasmonic assemblies, and high affinity and selectivity of aptamers. This combination enables selective and sensitive detection of targets even in strongly absorbing fluids. We expect that the presented sensing scheme can be adapted to a wide range of analytes and tailored to specific needs.

We demonstrate DNA-directed nanosystems with multiple components in motion., Coordinating functional parts to operate in concert is essential for machinery. In gear trains, meshed gears are compactly interlocked, working together to impose rotation or translation. In photosynthetic systems, a variety of biological entities in the thylakoid membrane interact with each other, converting light energy into chemical energy. However, coordinating individual parts to carry out regulated and coordinated motion within an artificial nanoarchitecture poses challenges, owing to the requisite control on the nanoscale. Here, we demonstrate DNA-directed nanosystems, which comprise hierarchically-assembled DNA origami filaments, fluorophores, and gold nanocrystals. These individual building blocks can execute independent, synchronous, or joint motion upon external inputs. These are optically monitored in situ using fluorescence spectroscopy, taking advantage of the sensitive distance-dependent interactions between the gold nanocrystals and fluorophores positioned on the DNA origami. Our work leverages the complexity of DNA-based artificial nanosystems with tailored dynamic functionality, representing a viable route towards technomimetic nanomachinery.

openaire: EC/H2020/713645/EU//BioMEP The inherent addressability of DNA origami structures makes them ideal templates for the arrangement of metal nanoparticles into complex plasmonic nanostructures. The high spatial precision of a DNA origami-templated assembly allows controlling the coupling between plasmonic resonances of individual particles and enables tailoring optical properties of the constructed nanostructures. Recently, chiral plasmonic systems attracted a lot of attention due to the strong correlation between the spatial configuration of plasmonic assemblies and their optical responses (e.g., circular dichroism [CD]). In this protocol, we describe the whole workflow for the generation of DNA origami-based chiral assemblies of gold nanorods (AuNRs). The protocol includes a detailed description of the design principles and experimental procedures for the fabrication of DNA origami templates, the synthesis of AuNRs, and the assembly of origami-AuNR structures. In addition, the characterization of structures using transmission electron microscopy (TEM) and CD spectroscopy is included. The described protocol is not limited to chiral configurations and can be adapted for the construction of various plasmonic architectures.

Detecting small sequences of RNA in biological samples such as microRNA or viral RNA demands highly sensitive and specific methods. Here, a reconfigurable DNA origami template has been used where a chiral arrangement of gold nanorods on the structure can lead to the generation of strong circular dichroism (CD). Switching of the cross-like DNA structure is achieved by the addition of nucleic acid sequences, which arrests the structure in one of the possible chiral states by specific molecular recognition. A specific sequence can thus be detected through the resulting changes in the plasmonic CD spectrum. We show the sensitive and selective detection of a target RNA sequence from the hepatitis C virus genome. The RNA binds to a complementary sequence that is part of the lock mechanism, which leads to the formation of a defined state of the plasmonic system with a distinct optical response. With this approach, we were able to detect this specific RNA sequence at concentrations as low as 100 pm.

Selective configuration control of plasmonic nanostructures using either top-down or bottom-up approaches has remained challenging in the field of active plasmonics. We demonstrate the realization of DNA-assembled reconfigurable plasmonic metamolecules, which can respond to a wide range of pH changes in a programmable manner. This programmability allows for selective reconfiguration of different plasmonic metamolecule species coexisting in solution through simple pH tuning. This approach enables discrimination of chiral plasmonic quasi-enantiomers and arbitrary tuning of chiroptical effects with unprecedented degrees of freedom. Our work outlines a new blueprint for implementation of advanced active plasmonic systems, in which individual structural species can be programmed to perform multiple tasks and functions in response to independent external stimuli.

DNA origami nanotechnology enables selective reconfiguration of plasmonic quasi-enantiomers through simple pH tuning., Selective configuration control of plasmonic nanostructures using either top-down or bottom-up approaches has remained challenging in the field of active plasmonics. We demonstrate the realization of DNA-assembled reconfigurable plasmonic metamolecules, which can respond to a wide range of pH changes in a programmable manner. This programmability allows for selective reconfiguration of different plasmonic metamolecule species coexisting in solution through simple pH tuning. This approach enables discrimination of chiral plasmonic quasi-enantiomers and arbitrary tuning of chiroptical effects with unprecedented degrees of freedom. Our work outlines a new blueprint for implementation of advanced active plasmonic systems, in which individual structural species can be programmed to perform multiple tasks and functions in response to independent external stimuli.

The combination of molecular self-assembly based on the DNA origami technique with lithographic patterning enables the creation of hierarchically ordered nanosystems, in which single molecules are positioned at precise locations on multiple length scales. Based on a hybrid assembly protocol utilizing DNA self-assembly and electron-beam lithography on transparent glass substrates, we here demonstrate a DNA origami microarray, which is compatible with the requirements of single molecule fluorescence and super-resolution microscopy. The spatial arrangement allows for a simple and reliable identification of single molecule events and facilitates automated read-out and data analysis. As a specific application, we utilize the microarray to characterize the performance of DNA strand displacement reactions localized on the DNA origami structures. We find considerable variability within the array, which results both from structural variations and stochastic reaction dynamics prevalent at the single molecule level.

Photo-responsive nanomaterials hold great promise for realizing information processing devices, micro-machines, and biosensors. Scalable assembly of such materials using mesostructured liquids, such as liquid crystals, remains a challenge due to the poor compatibility of nanostructures and the host medium. Here we demonstrate a new type of colloidal dispersion of plasmonic DNA-origami with photo-switchable chirality in cellulose nanofiber-based liquid crystals. The composite material inherits properties of DNA-origami plasmonic nanostructures, so that the composite’s chirality can be erased by ultraviolet light and recovered by visible light. The cellulose nanofibers provide a liquid crystalline host with weak optical birefringence, which barely affects the polarization of the incident light, so that the response is dominated by circular dichroism of uniformly dispersed plasmonic nanostructures. Our approach may serve as a new platform for scalable assembling DNA origami-templated nanomaterials.

We study the distance-dependent quenching of fluorescence due to a metallic nanoparticle in proximity of a fluorophore. In our single-molecule measurements, we achieve excellent control over structure and stoichiometry by using self-assembled DNA structures (DNA origami) as a breadboard where both the fluorophore and the 10 nm metallic nanoparticle are positioned with nanometer precision. The single-molecule spectroscopy method employed here reports on the co-localization of particle and dye, while fluorescence lifetime imaging is used to directly obtain the correlation of intensity and fluorescence lifetime for varying particle to dye distances. Our data can be well explained by exact calculations that include dipole dipole orientation and distances. Fitting with a more practical model for nanosurface energy transfer yields 10.4 nm as the characteristic distance of 50% energy transfer. The use of DNA nanotechnology together with minimal sample usage by attaching the particles to the DNA origami directly on the microscope coverslip paves the way for more complex experiments exploiting dye nanoparticle interactions. Fil: Acuna, Guillermo P.. Technische Universität Braunschweig; Alemania Fil: Bucher, Martina. Ludwig Maximilians Universitat; Alemania Fil: Stein, Ingo H.. Ludwig Maximilians Universitat; Alemania Fil: Steinhauer, Christian. Ludwig Maximilians Universitat; Alemania Fil: Kuzyk, Anton. Technische Universitat Munchen; Alemania Fil: Holzmeister, Phil. Technische Universität Braunschweig; Alemania Fil: Schreiber, Robert. Ludwig Maximilians Universitat; Alemania Fil: Moroz, Alexander. Fil: Stefani, Fernando Daniel. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física de Buenos Aires. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física de Buenos Aires; Argentina Fil: Liedl, Tim. Ludwig Maximilians Universitat; Alemania Fil: Simmel, Friedrich C.. Technische Universitat Munchen; Alemania Fil: Tinnefeld, Philip. Technische Universität Braunschweig; Alemania

DNA origami is a powerful method for the programmable assembly of nanoscale molecular structures. For applications of these structures as functional biomaterials, the study of reaction kinetics and dynamic processes in real time and with high spatial resolution becomes increasingly important. We present a single-molecule assay for the study of binding and unbinding kinetics on DNA origami. We find that the kinetics of hybridization to single-stranded extensions on DNA origami is similar to isolated substrate-immobilized DNA with a slight position dependence on the origami. On the basis of the knowledge of the kinetics, we exploit reversible specific binding of labeled oligonucleotides to DNA nanostructures for PAINT (points accumulation for imaging in nanoscale topography) imaging with

The influence of an interface on the energy level structure of hidden quantum dots was studied. A self-consistent formalism was used for the calculation of the linear response of a single hidden quantum dot and a dilute layer of quantum dots in the presence of a static homogenous magnetic field. The article studies how the shifts of energy levels caused by self-field interactions (the so-called Lamb shifts) depend on the distance to the surface and magnetic field. Numerical calculations show that the interaction between the quantum dot and the surface leads to substantial Lamb shifts. These shifts can reach relative values of more than 10%, and strongly decrease if the distance between the quantum dot and the surface increases. The influence of a concentration of quantum dots in a hidden layer was studied, and absorption spectra were calculated. The numerical calculations show that the influence of interaction between the quantum dots inside a dilute layer on the absorption profile is rather weak.

Recent advances in design and fabrication of helical nanostructures based on DNA self-assembly are reviewed. These helical nanostructures are either constructed entirely by DNA or based on DNA guided metal nanoparticles self-assembly. Biophysical properties and optical responses of corresponding helical nanostructures are also discussed.

A reconfigurable plasmonic nanosystem combines an active plasmonic structure with a regulated physical or chemical control input. There have been considerable efforts on integration of plasmonic nanostructures with active platforms using top-down techniques. The active media include phase-transition materials, graphene, liquid crystals and carrier-modulated semiconductors, which can respond to thermal, electrical and optical stimuli. However, these plasmonic nanostructures are often restricted to two-dimensional substrates, showing desired optical response only along specific excitation directions. Alternatively, bottom-up techniques offer a new pathway to impart reconfigurability and functionality to passive systems. In particular, DNA has proven to be one of the most versatile and robust building blocks for construction of complex three-dimensional architectures with high fidelity. Here we show the creation of reconfigurable three-dimensional plasmonic metamolecules, which execute DNA-regulated conformational changes at the nanoscale. DNA serves as both a construction material to organize plasmonic nanoparticles in three dimensions, as well as fuel for driving the metamolecules to distinct conformational states. Simultaneously, the three-dimensional plasmonic metamolecules can work as optical reporters, which transduce their conformational changes in situ into circular dichroism changes in the visible wavelength range.

3D plasmonic chiral colloids are synthesized through deterministically grouping of two gold nanorod AuNRs on DNA origami. These nanorod crosses exhibit strong circular dichroism (CD) at optical frequencies which can be engineered through position tuning of the rods on the origami. Our experimental results agree qualitatively well with theoretical predictions. © 2014 The Royal Society of Chemistry.

Circular dichroism spectra of naturally occurring molecules and also of synthetic chiral arrangements of plasmonic particles often exhibit characteristic bisignate shapes. Such spectra consist of peaks next to dips (or vice versa) and result from the superposition of signals originating from many individual chiral objects oriented randomly in solution. Here we show that by first aligning and then toggling the orientation of DNA-origami-scaffolded nanoparticle helices attached to a substrate, we are able to reversibly switch the optical response between two distinct circular dichroism spectra corresponding to either perpendicular or parallel helix orientation with respect to the light beam. The observed directional circular dichroism of our switchable plasmonic material is in good agreement with predictions based on dipole approximation theory. Such dynamic metamaterials introduce functionality into soft matter-based optical devices and may enable novel data storage schemes or signal modulators., Plasmonic resonances in nanoparticle helices arranged by the DNA origami method can give rise to strong circular dichroism at visible wavelengths. Schreiber et al. show that aligning and then toggling the orientation of such nanoparticle helices enables reversible switching of the dichroic response.

Dielectrophoresis has become a powerful tool for manipulation of various materials, such as metal and semiconducting particles, DNA molecules, nanowires and graphene. This short review is intended to provide the reader with an overview of the recent advances of application of dielectrophoresis at the nanoscale.

We report on strong coupling between surface-plasmon polaritons and Rhodamine 6G molecules at room temperature. As a reference to compare with, we first determine the dispersion curve of (uncoupled) surface plasmon polaritons on a 50 nm thick film of silver. Consequently, we determine the dispersion curve of surface plasmon polaritons strongly coupled to Rhodamine 6G molecules, which exhibits vacuum Rabi splitting. Depending on the Rhodamine 6G concentration, we find splitting energies between 0.05 eV and 0.13 eV.

DNA is one of the most promising molecules for nanoscale bottom-up fabrication. For both scientific studies and fabrication of devices, it is desirable to be able to manipulate DNA molecules, or self--assembled DNA constructions, at the single unit level. Efficient methods are needed for precisely attaching the single unit to the external measurement setup or the device structure. So far, this has often been too cumbersome to achieve, and consequently most of the scientific studies are based on a statistical analysis or measurements done for a sample containing numerous molecules in liquid or in a dry state. Here, we explain a method for trapping and attaching nanoscale double-stranded DNA (dsDNA) molecules between nanoelectrodes. The method is based on dielectrophoresis and gives a high yield of trapping only single or a few molecules, which enables, for example, transport measurements at the single -molecule level. The method has been used to trap different dsDNA fragments, sizes varying from 27 to 8,416 bp, and also DNA origami constructions. We also explain how confocal microscopy can be used to determine and optimize the trapping parameters.

Surface plasmon resonances generated in metallic nanostructures can be utilized to tailor electromagnetic fields. The precise spatial arrangement of such structures can result in surprising optical properties that are not found in any naturally occurring material. Here, the designed activity emerges from collective effects of singular components equipped with limited individual functionality. Top-down fabrication of plasmonic materials with a predesigned optical response in the visible range by conventional lithographic methods has remained challenging due to their limited resolution, the complexity of scaling, and the difficulty to extend these techniques to three-dimensional architectures. Molecular self-assembly provides an alternative route to create such materials which is not bound by the above limitations. We demonstrate how the DNA origami method can be used to produce plasmonic materials with a tailored optical response at visible wavelengths. Harnessing the assembly power of 3D DNA origami, we arranged metal nanoparticles with a spatial accuracy of 2 nm into nanoscale helices. The helical structures assemble in solution in a massively parallel fashion and with near quantitative yields. As a designed optical response, we generated giant circular dichroism and optical rotary dispersion in the visible range that originates from the collective plasmon-plasmon interactions within the nanohelices. We also show that the optical response can be tuned through the visible spectrum by changing the composition of the metal nanoparticles. The observed effects are independent of the direction of the incident light and can be switched by design between left- and right-handed orientation. Our work demonstrates the production of complex bulk materials from precisely designed nanoscopic assemblies and highlights the potential of DNA self-assembly for the fabrication of plasmonic nanostructures., Comment: 5 pages, 4 figures

The exceptional self-assembly properties of DNA, which are based on simple base-paring rules, make it a very promising construction material in the nanoworld. [ 1 ] The development of the DNA-origami technique, [ 2 ] which is based on the folding of long single-stranded DNA with the help of hundreds of short oligonucleotides (so-called staple strands), opened new routes to relatively simple and fast fabrication of twoand three-dimensional nanostructures of exceptional complexity. [ 2–7 ] Since individual staple strands can be readily modifi ed with various functional groups, the DNA-origami structure can be used as a template for the organization of different materials, for example, proteins, [ 8–11 ] metal nanoparticles, [ 12–14 ] virus capsids, [ 15 ] and carbon nanotubes, [ 16 ]

We report on strong coupling between surface plasmon polaritons (SPP) and Rhodamine 6G (R6G) molecules, with double vacuum Rabi splitting energies up to 230 and 110 meV. In addition, we demonstrate the emission of all three energy branches of the strongly coupled SPP-exciton hybrid system, revealing features of system dynamics that are not visible in conventional reflectometry. Finally, in analogy to tunable-Q microcavities, we show that the Rabi splitting can be controlled by adjusting the interaction time between waveguided SPPs and R6G deposited on top of the waveguide. The interaction time can be controlled with sub-fs precision by adjusting the length of the R6G area with standard lithography methods., Comment: 4 pages, 4 figures

We use molecules to couple light into and out of microscale plasmonic waveguides. Energy transfer, mediated by surface plasmons, from donor molecules to acceptor molecules over ten micrometer distances is demonstrated. Also surface plasmon coupled emission from the donor molecules is observed at similar distances away from the excitation spot. The lithographic fabrication method we use for positioning the dye molecules allows scaling to nanometer dimensions. The use of molecules as couplers between far-field and near-field light offers the advantages that no special excitation geometry is needed, any light source can be used to excite plasmons and the excitation can be localized below the diffraction limit. Moreover, the use of molecules has the potential for integration with molecular electronics and for the use of molecular self-assembly in fabrication. Our results constitute a proof-of-principle demonstration of a plasmonic waveguide where signal in- and outcoupling is done by molecules., 9 pages, 5 figures

In this thesis three-dimensional tube-shaped DNA-origamis were dielectrophoretically trapped within lithographically fabricated nanoelectrodes. The origamis had been premade while the electrodes were fabricated specifically for these experiments with two different gapsizes, 150 nm and 400 nm. The aim of the work was to capture individual nanotubes in the gap between the electrodes by utilizing the dielectrophoretic forces present in the structure when a solution containing the origamis was put onto the electrodes and a voltage was applied. It was observed during the experiments that the success of the dielectrophoretic trapping depended strongly on the trapping conditions. This caused the trapping to be somewhat challenging and it was also noticed that the electrode structure with the 400 nm gap particularly required patience in order to produce good results, since the origamis to be trapped were of the same size as the gap between the electrodes making the successful trapping problematic. Despite this, a sufficient amount of trapped single nanotubes were produced.

Dielectrophoresis can potentially be used as an efficient trapping tool in the fabrication of molecular devices. For nanoscale objects, however, the Brownian motion poses a challenge. We show that the use of carbon nanotube electrodes makes it possible to apply relatively low trapping voltages and still achieve high enough field gradients for trapping nanoscale objects, e.g., single molecules. We compare the efficiency and other characteristics of dielectrophoresis between carbon nanotube electrodes and lithographically fabricated metallic electrodes, in the case of trapping nanoscale DNA molecules. The results are analyzed using finite element method simulations and reveal information about the frequency dependent polarizability of DNA., 5 pages with 6 figures

The dielectrophoresis method for trapping and attaching nanoscale double-stranded DNA between nanoelectrodes was developed. The method gives a high yield of trapping single or a few molecules only which enables transport measurements at the single molecule level. Electrical conductivity of individual 140-nm-long DNA molecules was measured, showing insulating behavior in dry conditions. In contrast, clear enhancement of conductivity was observed in moist conditions, relating to the interplay between the conformation of DNA molecules and their conductivity.

The use of the dielectrophoresis as a tool for DNA manipulation is demonstrated experimentally, using both unmodified 48,500 base pairs long bacteriophage lambda dsDNA (λ-DNA), ∼16 μm in length and 414 base pairs long thiol modified natural dsDNA (avDNA), ∼140 nm in length. We show that both the dsDNA types used, are effectively directed between the planar gold electrodes by the positive dielectrophoresis while applying an AC voltage at frequencies between 500 kHz and 1 MHz. With high concentrations of dsDNA in buffer the attached dsDNA molecules are shown to form bundles or clumps (both λ-DNA and avDNA). Furthermore, we demonstrate the attaching of a single avDNA molecule to an electrode via gold-thiol bonding. Also the clear orientation and straightening along the electric field is seen in this case. In addition, the electrical conductivity of dsDNA is studied by measuring the full I-V characteristics of the samples. acceptedVersion

We used the DNA origami method (Rothemund, 2006) for the fabrication of self-assembled nanoscopic materials (Seeman, 2010). In DNA origami, a virus-based 8 kilobase-long DNA single-strand is folded into shape with the help of ∼ 200 synthetic oligonucleotides. The resulting DNA nanostructures can be designed to adopt any three-dimensional shape and can be addressed through DNA hybridization or chemical modification with nanometer precision. We have realized that complex assemblies of nanoparticles, including magnetic, fluorescent, and plasmonic nanoparticles. Such nanoconstructs may exhibit striking optical properties such as strong optical activity in the visible range (Kuzyk et al., 2012). To this end, plasmonic particles were assembled in solution to form helices of controlled handedness. We achieved spatial control over particle placement better than 2 nm and attachment yields of 97% and above. As a collective optical response emerging from our dispersed nanostructures, we detected pronounced circular ...

A variety of polymerization methods for the assembly of elongated nanoribbons from rectangular DNA origami structures are investigated. The most efficient method utilizes single-stranded DNA oligonucleotides to bridge an intermolecular scaffold seam between origami monomers. This approach allows the fabrication of origami ribbons with lengths of several micrometers, which can be used for long-range ordered arrangement of proteins. It is quantitatively shown that the length distribution of origami ribbons obtained with this technique follows the theoretical prediction for a simple linear polymerization reaction. The design of flat single layer origami structures with constant crossover spacing inevitably results in local underwinding of the DNA helix, which leads to a global twist of the origami structures that also translates to the nanoribbons.

We describe two general approaches to the utilization of DNA origami structures for the assembly of materials. In one approach, DNA origami is used as a prefabricated template for subsequent assembly of materials. In the other, materials are assembled simultaneously with the DNA origami, i.e. the DNA origami technique is used to drive the assembly of materials. Fabrication of complex protein structures is demonstrated by these two approaches. The latter approach has the potential to be extended to the assembly of multiple materials with single attachment chemistry.