Search

With its capability for automated production of high-resolution structures, 3D printing can develop plant-based seafood mimics with comparable protein content. However, the challenge lies in solidifying 3D printed products to achieve the firmness of seafood. Targeting prawn, texturisation of its 3D printed mimic by curdlan gum was compared against incubation with a protein cross-linking enzyme, microbial transglutaminase. Faba bean protein extract (FBP) was selected for its lightest colour. To confer structural stability to the FBP-based ink without hindering extrudability, adding 1 % xanthan gum was optimal. Printed curdlan-containing mimics were steamed for 9 min, while printed transglutaminase-containing mimics were incubated at 55 °C before steaming. Either adding 0.0625 % or 0.125 % w/w curdlan or, incubating the transglutaminase-containing mimics for an hour achieved chewiness of 818.8-940.6 g, comparable to that of steamed prawn (953.13 g). Curdlan hydrogel penetrated and reinforced the FBP network as observed under confocal imaging. Whereas incubation of transglutaminase-containing mimics enhanced microstructural connectivity, attributable to transglutaminase-catalysed isopeptide cross-linkages, and the consequent increase in disulfide bonding and β-sheet. Ultimately, transglutaminase treatment appeared more suitable than curdlan, as it yielded mimics with cutting strength comparable to steamed prawn. Both demonstrated promising potential to broaden the variety of 3D printed seafood mimics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Techno-functional properties of protein isolates such as emulsification, foaming, and gelling serve as key indicators to determine their food applications. Conventional macro-volume techniques used to measure these techno-functional properties are usually time consuming, require large amounts of protein samples, and are impractical when diverse protein samples are handled at the early screening stage. To overcome these issues, we have developed scaled-down (miniaturized) assays to test techno-functional properties of protein samples. These assays are simple, efficient, and require <400 μl of protein solution. Specifically, the miniaturized emulsification and gelling assays require 25-fold less protein than conventional macro-volume techniques and the miniaturized foaming assay requires 100-fold less sample. The performance of these assays has been thoroughly validated using conventional techno-functional tests for each parameter. The protocols described herein offer high-throughput screening capabilities, accelerating the testing process for protein techno-functional properties and allowing for quick identification of samples of interest from diverse samples. © 2024 Wiley Periodicals LLC. Basic Protocol 1: Miniaturized emulsification assay Alternate Protocol 1: Conventional macro-volume emulsification assay Basic Protocol 2: Miniaturized foaming assay Alternate Protocol 2: Conventional macro-volume foaming assay Basic Protocol 3: Miniaturized gelling assay Alternate Protocol 3: Conventional macro-volume gelling assay., (© 2024 Wiley Periodicals LLC.)

The recent successful application of lipid-based nanoparticles as delivery vehicles in COVID-19 vaccines demonstrated the superior potential of nanoparticle-based technology for targeted drug delivery in biomedicine. Among novel, rapidly advancing delivery platforms, the inorganic nano/microparticles gradually reach new heights and attract well-deserved attention among scientists and clinicians. Calcium carbonate in its vaterite form is used as a biocompatible carrier for a progressively increasing number of biomedical applications. Its growing popularity is conferred by beneficial porosity of particles, high mechanical stability, biodegradability under certain physiological conditions, ability to provide a continuous steady release of bioactives, preferential safety profile, and low cost, which make calcium carbonate a suitable entity of highly efficacious formulations for controlled drug delivery and release. The focal point of the current review is the success of the recent vaterite applications in the delivery of various diagnostics and therapeutic drugs. The manuscript highlights the nuances of drug loading in vaterite particles, connecting it with particle morphology, size, and charge of the loaded molecules, payload concentration, mono- or multiple drug loading. The manuscript also depicts recent successful methods of increasing the loading capacity developed for vaterite carriers. In addition, the review describes the various administration routes for vaterite particles with bioactive payloads, which were reported in recent years. Special attention is given to the multi-drug-loaded vaterite particles ("molecular cocktails") and reports on their successful delivery in vitro and in vivo ., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2022 The Authors.)

Microencapsulation and targeted delivery of cytotoxic and antibacterial agents of photodynamic therapy (PDT) improve the treatment outcomes for infectious diseases and cancer. In many cases, the loss of activity, poor encapsulation efficiency, and inadequate drug dosing hamper the success of this strategy. Therefore, the development of novel and reliable microencapsulated drug formulations granting high efficacy is of paramount importance. Here we report the in vitro delivery of a water-soluble cationic PDT drug, zinc phthalocyanine choline derivative (Cholosens), by biodegradable microcapsules assembled from dextran sulfate (DS) and poly-l-arginine (PArg). A photosensitizer was loaded in pre-formed [DS/PArg] 4 hollow microcapsules with or without exposure to heat. Loading efficacy and drug release were quantitatively studied depending on the capsule concentration to emphasize the interactions between the DS/PArg multilayer network and Cholosens. The loading data were used to determine the dosage for heated and intact capsules to measure their PDT activity in vitro. The capsules were tested using human cervical adenocarcinoma (HeLa) and normal human dermal fibroblast (NHDF) cell lines, and two bacterial strains, Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli . Our results provide compelling evidence that encapsulated forms of Cholosens are efficient as PDT drugs for both eukaryotic cells and bacteria at specified capsule-to-cell ratios.

Formulated forms of cancer therapeutics enhance the efficacy of treatment by more precise targeting, increased bioavailability of drugs, and an aptitude of some delivery systems to overcome multiple drug resistance of tumors. Drug carriers acquire importance for anti-cancer interventions via targeting tumor-associated macrophages with active molecules capable to either eliminate them or change their polarity. Although several packaged drug forms have reached the market, there is still a high demand for novel carrier systems to hurdle limitations of existing drugs on active molecules, toxicity, bioeffect, and stability. Here, we report a facile assembly and delivery methodology for biodegradable polymeric multilayer capsules (PMC) with the purpose of further use in injectable drug formulations for lung cancer therapy via direct erosion of tumors and suppression of the tumor-promoting function of macrophages in the tumor microenvironment. We demonstrate delivery of low-molecular-weight drug molecules to lung cancer cells and macrophages and provide details on in vivo distribution, cellular uptake, and disintegration of the developed PMC. Poly-l-arginine and dextran sulfate alternately adsorb on a ∼500 nm CaCO 3 sacrificial template followed by removal of the inorganic core to obtain hollow capsules for consequent loading with drug molecules, gemcitabine or clodronate. The capsules further compacted upon loading down to ∼250 nm in diameter via heat treatment. A comparative study of the capsule internalization rate in vitro and in vivo reveals the benefits of a diminished carrier size . We show that macrophages and epithelial cells of the lungs and liver internalize capsules with efficacy higher than 75%. Using an in vivo mouse model of lung cancer, we also confirm that tumor lungs better retain smaller capsules than the healthy lung tissue. The pronounced cytotoxic effect of the encapsulated gemcitabine on lung cancer cells and the ability of the encapsulated clodronate to block the tumor-promoting function of macrophages prove the efficacy of the developed capsule loading method in vitro. Our study taken as a whole demonstrates the great potential of the developed PMC for in vivo treatment of cancer via transporting active molecules, including those that are water-soluble with low molecular weight, to both cancer cells and macrophages through the bloodstream.

Efficient delivery of genetic material to primary cells remains challenging. Here, efficient transfer of genetic material is presented using synthetic biodegradable nanocarriers, resembling extracellular vesicles in their biomechanical properties. This is based on two main technological achievements: generation of soft biodegradable polyelectrolyte capsules in nanosize and efficient application of the nanocapsules for co-transfer of different RNAs to tumor cell lines and primary cells, including hematopoietic progenitor cells and primary T cells. Near to 100% efficiency is reached using only 2.5 × 10 -4 pmol of siRNA, and 1 × 10 -3 nmol of mRNA per cell, which is several magnitude orders below the amounts reported for any of methods published so far. The data show that biodegradable nanocapsules represent a universal and highly efficient biomimetic platform for the transfer of genetic material with the utmost potential to revolutionize gene transfer technology in vitro and in vivo., (© 2019 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Layer-by-layer assembled polymeric multilayer capsules (PMC) of micrometer sizes are permeable for molecules below 1 KDa; therefore, the efficacy of such capsules in the delivery of low molecular weight water soluble bioactive compounds and drugs is frequently challenged. Thermally induced contraction of hollow PMC is explored here to enhance their loading efficacy with model compound, fluorescent rhodamine B (RhB). Four bilayered capsules obtained of poly(diallyldimethylammonium chloride)/polystyrene sulfonate ([PDADMAC/PSS] 4 ) or poly-l-arginine/dextran sulfate ([PARG/DS] 4 ) on sacrificial CaCO 3 spherical microparticles are postloaded with RhB at ambient or elevated temperatures. The influence of heat on capsule loading is determined quantitatively by varying the amounts of capsules in the batch and keeping the concentration of RhB constant. The applied heat improves the loading efficacy of [PDADMAC/PSS] 4 capsules at concentrations up to 2.25 × 10 9 capsules mL -1 , but has a reversed effect on [PARG/DS] 4 capsules at all studied concentrations ((0-3.5) × 10 9 capsules mL -1 )., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Aiming to explore elevated temperatures as a tool for miniaturization of biodegradable polymer multilayer capsules, assembled on spherical vaterite micron- and submicron-sized particles, we subject the shells composed of dextran sulfate (DS) and poly-L-arginine (Parg) to a heat treatment. Changes of the capsule size are studied at various temperatures and ionic strengths of the continuous phase. Unlike some synthetic polymer multilayer shells (their response to heat treatment depends on the number of layers and their arrangement), the biodegradable Parg/DS capsules exhibit size reduction and profound compaction regardless of their initial size, number of polymer layers and polymer layer sequence. The capsule response to heat is stable at ionic strengths of the continuous phase not exceeding 0.1 M NaCl., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Lactoferrin (Lf) has considerable potential as a functional ingredient in food, cosmetic and pharmaceutical applications. However, the bioavailability of Lf is limited as it is susceptible to digestive enzymes in gastrointestinal tract. The shells comprising alternate layers of bovine serum albumin (BSA) and tannic acid (TA) were tested as Lf encapsulation system for oral administration. Lf absorption by freshly prepared porous 3 μm CaCO 3 particles followed by Layer-by-Layer assembly of the BSA-TA shells and dissolution of the CaCO 3 cores was suggested as the most efficient and harmless Lf loading method. The microcapsules showed high stability in gastric conditions and effectively protected encapsulated proteins from digestion. Protective efficiency was found to be 76 ± 6% and 85 ± 2%, for (BSA-TA) 4 and (BSA-TA) 8 shells, respectively. The transit of Lf along the gastrointestinal tract (GIT) of mice was followed in vivo and ex vivo using NIR luminescence. We have demonstrated that microcapsules released Lf in small intestine allowing 6.5 times higher concentration than in control group dosed with the same amount of free Lf. Significant amounts of Lf released from microcapsules were then absorbed into bloodstream and accumulated in liver. Suggested encapsulation system has a great potential for functional foods providing lactoferrin.

Intracellular delivery of messenger RNA (mRNA) is a promising approach for experimental and therapeutic manipulation of cellular activity. However, environmental RNase hinders reliable handling of mRNA for experimental and therapeutic use. In this study, biodegradable capsules composed of dextran sulfate and poly-l-arginine in the layer-by-layer (LbL) fashion are employed for the protection and delivery of mRNA. Our results demonstrate that addition of RNase inhibitors to mRNA while co-precipitation with CaCO 3 and subsequent LbL encapsulation are both crucial to preserve the integrity of mRNA. The expression of functional luciferase enzyme in HEK293T human embryonic kidney cells after incubation with synthetic luciferase-encoding mRNA capsules indicates the reliability of the encapsulating system and cellular intake of functional mRNAs. These improvements in mRNA encapsulation should provide essential basis for microcapsule-based mRNA delivery for further applications.

With the purpose to replace expensive and significantly cytotoxic positively charged polypeptides in biodegradable capsules formed via Layer-by-Layer (LbL) assembly, multilayers of bovine serum albumin (BSA) and tannic acid (TA) are obtained and employed for encapsulation and release of model drugs with different solubility in water: hydrophilic-tetramethylrhodamine-isothiocyanate-labeled BSA (TRITC-BSA) and hydrophobic 3,4,9,10-tetra-(hectoxy-carbonyl)-perylene (THCP). Hydrogen bonding is proposed to be predominant within thus formed BSA/TA films. The TRITC-BSA-loaded capsules comprising 6 bilayers of the protein and polyphenol are benchmarked against the shells composed of dextran sulfate (DS) and poly-l-arginine (PARG) on degradability by two proteolytic enzymes with different cleavage site specificity (i.e., α-chymotrypsin and trypsin) and toxicity for murine RAW264.7 macrophage cells. Capsules of both types possess low cytotoxicity taken at concentrations equal or below 50 capsules per cell, and evident susceptibility to α-chymotrypsin resulted in release of TRITC-BSA. While the BSA/TA-based capsules clearly display resistance to treatment with trypsin, the assemblies of DS/PARG extensively degrade. Successful encapsulation of THCP in the TRITC-BSA/TA/BSA multilayer is confirmed, and the release of the model drug is observed in response to treatment with α-chymotrypsin. The thickness, surface morphology, and enzyme-catalyzed degradation process of the BSA/TA-based films are investigated on a planar multilayer comprising 40 bilayers of the protein and polyphenol deposited on a silicon wafer. The developed BSA/TA-based capsules with a protease-specific degradation mechanism are proposed to find applications in personal care, pharmacology, and the development of drug delivery systems including those intravenous injectable and having site-specific release capability.

Among the polymorph modifications of calcium carbonate, the metastable vaterite is the most practically important. Vaterite particles are applied in regenerative medicine, drug delivery and a broad range of personal care products. This manuscript scopes to review the mechanism of the calcium carbonate crystal growth highlighting the factors stabilizing the vaterite polymorph in the most cost efficient synthesis routine. The size of vaterite particles is a crucial parameter for practical applications. The options for tuning the particle size are also discussed., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The manuscript scopes to review the emulsion-based techniques aimed for encapsulation of active compounds found in biomedical applications, functional foodstuff, skin care and cosmetology. The advantages, limitations and outlook are discussed for each method., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Layer-by-layer assembled shells are prospective candidates for encapsulation, stabilization, storage, and release of fragrances. A shell comprising four alternative layers of a protein and a polyphenol is employed to encapsulate the dispersed phase of a fragrance-containing oil-in-water emulsion. The model fragrance used in this work consists of 10 ingredients, covering a range of typically employed aroma molecules, all premixed in equal mass and with sunflower oil acting as the base. The encapsulated emulsion is stable after 2 months of storage at 4 °C as revealed by static light scattering and confocal laser scanning microscopy. Gas chromatography/mass spectrometry data show that the encapsulation efficiency of 8 out of 10 fragrance ingredients depends on the water solubility: the less water-soluble an ingredient, the more of it is encapsulated. The amount of these fragrance ingredients remaining encapsulated decreases linearly upon emulsion incubation at 40 °C and the multilayer shell does not hinder their release. The other two fragrance ingredients having the lowest saturation vapor pressure demonstrate sustained release over 5 days of incubation at 40 °C. The composition of released fragrance remains almost constant over 3 days of incubation, upon further incubation it becomes enriched with these two ingredients when others start to be depleted.

The main aim of this study was to modify the supercritical antisolvent precipitation method to enhance the mass transfer in order to prepare smaller nanoparticles of drugs. The supercritical antisolvent apparatus was customized by introducing a titanium horn in the precipitation chamber for generation of the ultrasonic field for enhanced mass transfer and the method was called supercritical antisolvent with enhanced mass transfer (SAS-EM). The effects of flow rate, ultrasonic amplitude, drug concentration and flow time on the particle size were investigated. The results showed that increasing the flow rate, incrementing the ultrasonic power up to an optimum point, decreasing the drug concentration and reducing the flow time helped to achieve smaller quercetin particles in the range of 120-450 nm. It is also shown that there is a tradeoff between the particle size and the yield; therefore the process parameters can be selected based on the particle size requirement. DSC studies suggested that the crystallinity of SAS-EM prepared quercetin nanoparticles decreased as compared to original quercetin powder. The dissolution of SAS-EM prepared nanoparticles increased significantly in comparison with the original quercetin powder. However, there was no significant difference in the dissolution of various quercetin nanoparticles samples prepared by the SAS-EM process. The best dissolution percent achieved was 75% for the smallest size sample prepared at the flow rate of 5 ml/min, power supply of 200 W, drug concentration of 10mg/ml, and flow time of 4 min., (Copyright © 2013. Published by Elsevier B.V.)

Patterned arrays of light-responsive microchambers are suggested as candidates for site-specific release of chemicals in small and precisely defined quantities on demand. A composite film is made of poly(allylammonium)-poly(styrene sulfonate) multilayers and gold nanoparticles incorporated between subsequent stacks of polyelectrolytes. The film shaped as microchambers is loaded with colloid particles or oil-soluble molecules. The microchambers are sealed onto a glass slide precoated with an adhesive poly(diallyldimethylammonium)-poly(styrene sulfonate) multilayer film. A focused laser beam is used for remote addressing the individual microchambers and site-specific release of the loaded cargo., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Basic fibroblast growth factor (FGF2) is an important protein for cellular activity and highly vulnerable to environmental conditions. FGF2 protected by heparin and bovine serum albumin was loaded into the microcapsules by a coprecipitation-based layer-by-layer encapsulation method. Low cytotoxic and biodegradable polyelectrolytes dextran sulfate and poly-L-arginine were used for capsule shell assembly. The shell thickness-dependent encapsulation efficiency was measured by enzyme-linked immunosorbent assay. A maximum encapsulation efficiency of 42% could be achieved by microcapsules with a shell thickness of 14 layers. The effects of microcapsule concentration and shell thickness on cytotoxicity, FGF2 release kinetics, and L929 cell proliferation were evaluated in vitro. The advantage of using microcapsules as the carrier for FGF2 controlled release for enhancing L929 cell proliferation was analyzed.

Polyelectrolyte multilayer capsules represent a unique tool to fabricate micron- and submicron-sized delivery systems with the properties of external guidance by means of remote physical influence. Embedding of nanoparticles into polyelectrolyte multilayer constructs opens up the opportunities to navigate the capsules with magnetic field and in-situ trigger the release of encapsulated material in response to the physical stimuli, such as light and ultrasound. So far, optically- and magnetically-induced addressing of the polyelectrolyte multilayer capsules internalized by the living cells in-vitro has been demonstrated. In this review, we discuss the state of the art, future perspectives and anticipated obstacles of in-vivo and in-vitro applications of the polyelectrolyte capsules performing remotely controlled release delivery of bioactives., (Crown Copyright © 2011. Published by Elsevier B.V. All rights reserved.)

The original theoretical model of polyelectrolyte adsorption onto water-dispersed colloid particles is extended to the system of polydisperse droplets of sunflower oil. Polycation (poly(allylamine hydrochloride)) and polyanion (poly(sodium 4-styrenesulfonate)) are taken in the theoretically projected concentrations to perform Layer-by-Layer assembly of a multilayer shell on the surface of oil droplets preliminary stabilized with a protein emulsifier (bovine serum albumin). The velocity of gravitational separation in suspension of encapsulated oil droplets is theoretically predicted and experimentally measured depending on the coating shell's thickness, aiming to clarify the mechanism to control over the separation process. Combining the theory and experimental data, the mass density of a polyelectrolyte multilayer shell assembled in a Layer-by-Layer fashion is obtained. Polyelectrolyte multilayer coated oil droplets are characterized by means of ζ-potential, and particle size measurements, and visualized by scanning electron microscopy.

Fast lipid peroxidation in emulsified oils results in carcinogens formation and product rancidity. Prevention of oxidative degradation in oil-in-water emulsion has been achieved by encapsulating of each droplet of dispersed phase in antioxidant multilayer coating shell. The fabrication comprised placing a surface-active ionic emulsifier at the oil/water interface followed by stepwise alternate adsorption a biocompatible polyelectrolyte and antioxidant layers. Uncoupled polyelectrolyte macromolecules and antioxidant were thoroughly removed from formulation, thus the protection was entirely attributed to the droplets' shell. The experiments were performed using linseed oil, the richest source of highly unstable omega-3 alpha linolenic essential fatty acid. Bovine serum albumin (BSA) was exploited as an anionic emulsifier. The biodegradable coating shell was formed of poly-l-arginine (PARG) and dextran sulfate (DS) applied as a polycation and a polyanion respectively. Tannic acid (TA) known as a natural antioxidant and possessing antimicrobial properties was used as a protective remedy. Oil microdroplets coated with TA-containing shell displayed physical-chemical and mechanical stability in aqueous phase and over freeze-drying process as determined by ζ-potential measurements, dynamic light scattering (DLS), and confocal laser scanning microscopy (CLSM). Oxidation of emulsified oil was monitored by formation of malondialdehyde (MDA) in the samples quantified by Thiobarbituric Acid Reactive Substances (TBARS) assay. Coating shell with an incorporated layer of TA effectively suppressed oxidation in water-dispersed oil droplets and affected iron-catalyzed oxidation over 15 days of incubation at 37 °C in 0.3 mM FeBr2 solution. Antioxidant activity of TA-containing shell assembled around each oil droplet was found to be higher than that of mixed tocopherols (MT) added to linseed oil in concentration of 10000 ppm.

Recent advances in medicine and biotechnology have prompted the need to develop nanoengineered delivery systems that can encapsulate a wide variety of novel therapeutics such as proteins, chemotherapeutics, and nucleic acids. Moreover, these delivery systems should be "intelligent", such that they can deliver their payload at a well-defined time, place, or after a specific stimulus. Polymeric multilayer capsules, made by layer-by-layer (LbL) coating of a sacrificial template followed by dissolution of the template, allow the design of microcapsules in aqueous conditions by using simple building blocks and assembly procedures, and provide a previously unmet control over the functionality of the microcapsules. Polymeric multilayer capsules have recently received increased interest from the life science community, and many interesting systems have appeared in the literature with biodegradable components and biospecific functionalities. In this Review we give an overview of the recent breakthroughs in their application for drug delivery.

The development of polyelectrolyte multilayer microcapsules as a delivery system containing bioactive compounds strongly depends on understanding of the major factors that influence capsules' loading and release of incorporated substances. Mechanism of protein release from biocompatible polyelectrolyte multilayer microcapsules has been examined using two different approaches of protein encapsulation: (i) "preloading" via coprecipitation of tetramethylrhodamine isothiocyanate (TRITC)-labeled bovine serum albumin (BSA) (TRITC-BSA) into CaCO(3) particles followed by multilayer assembly and (ii) "postloading" of TRITC-BSA in preformed empty capsules templated on pure CaCO(3) particles taken in the same amount as in "preloading" approach. Polysaccharides (alginate (Alg) or dextran sulfate (Dex)) and polyarginine (PAr) were used as layer constituents. On the basis of the effects of capsule shell composition and thickness, method of protein encapsulation, volume of the surrounding medium, and frequency of medium refreshment on protein release profile, we reveal a mechanism of protein release. The key phenomenon determining the protein release is the property of multilayer polyelectrolyte shells relating to the entrapping and accumulation of protein molecules. The results obtained together with the suggested mechanism of capsule loading and protein release allow us to propose the use of polyelectrolyte microcapsules as a depot system to supply and maintain a defined level of macromolecular drug concentration in surrounding medium.

Investigation of DNA interactions with cationic lipids is of particular importance for the fabrication of biosensors and nanodevices. Furthermore, lipid/DNA complexes can be applied for direct delivery of DNA-based biopharmaceuticals to damaged cells as non-viral vectors. To obtain more effective and safer DNA vectors, the new cationic lipids 2-tetradecylhexadecanoic acid-{2-[(2-aminoethyl)amino]ethyl}amide (CI) and 2-tetradecylhexadecanoic acid-2-[bis(2-aminoethyl)amino]ethylamide (CII) were synthesized and characterized. The synthesis, physical-chemical properties and first transfection and toxicity experiments are reported. Special attention was focused on the capability of CI and CII to complex DNA at low and high subphase pH values. Langmuir monolayers at the air/water interface represent a well-defined model system to study the lipid/DNA complexes. Interactions and ordering of DNA under Langmuir monolayers of the new cationic lipids were studied using film balance measurements, grazing incidence X-ray diffraction (GIXD) and X-ray reflectivity (XR). The results obtained demonstrate the ability of these cationic lipids to couple with DNA at low as well as at high pH value. Moreover, the observed DNA structuring seems not to depend on subphase pH conditions. An influence of the chemical structure of the lipid head group on the DNA binding ability was clearly observed. Both compounds show good transfection efficacy and low toxicity in the in vitro experiments indicating that lipids with such structures are promising candidates for successful gene delivery systems.

Using nanoimprint lithography, arrays of highly ordered patterns of polyelectrolyte multilayer microcapsules consisting of alternating layers of poly(allylamine hydrochloride) and poly(sodium 4-styrene sulfonate) have been achieved. Anchoring the capsules on a pre-patterned substrate facilitates the utilization of their various capabilities in lab-on-a chip devices. In this paper we have demonstrated a very effective method to entrap soft capsules into surface cavities. Supported microcapsules were applied as the depots for loading and storage of macromolecular cargo (glucose oxidase and peroxidase) and as preserved microvessels for the cascade of enzymatic reactions. The loading of capsules was achieved under a pre-determined pH environment. This development is potentially useful for the realization of novel multianalytical systems for catalytic, bio-affinity and pH detection with protected sensing molecules.

In order to be used in versatile DNA delivery systems, novel cationic lipids were synthesized. The head groups of the new compounds represented by monoamines or oligoamines can be charged or uncharged depending on the environmental pH. Since their pK values are unknown, the protonation properties of these lipids have been studied in a wide pH range. In our experiments, the amphiphilic molecules were organized as a Langmuir monolayer at the air-water interface. Total reflection X-ray fluorescence (TRXF) was used to determine the 2D concentration of bromide counterions bound to a positively charged (protonated) Langmuir monolayer. The protonation rate of the novel cationic lipids was estimated by comparing the fluorescence intensity with that of dioctadecyldimethylammonium bromide monolayers as a reference. TRXF investigations were supplemented with results of film-balance measurements, grazing incidence X-ray diffraction, and X-ray reflectivity data. The results obtained display that the monolayers of all studied compounds are completely uncharged at pH values above 10. In the investigated pH region, the highest protonation rate of the monolayers is observed at pH 3. The influence of the monolayer packing density on the protonation properties is clearly shown.

Cationic liposomes/DNA complexes can be used as nonviral vectors for direct delivery of DNA-based biopharmaceuticals to damaged cells and tissues. In order to obtain more effective and safer liposome-based gene transfection systems, the new cationic lipid 2-amino-3-hexadecyloxy-2-(hexadecyloxymethyl)propan-1-ol (AHHP) was synthesized. In this paper we report on the synthesis of AHHP and investigations of its physical-chemical properties. Langmuir monolayers of AHHP were studied at the air/buffer interface by film balance measurements, grazing incidence X-ray diffraction (GIXD), and infrared reflection absorption spectroscopy (IRRAS). Structure and thermotropic phase behavior of AHHP in aqueous dispersion were examined by small-angle and wide-angle X-ray scattering (SAXS/WAXS) and differential scanning calorimetry (DSC). The results show clear differences in structure and phase behavior of AHHP, both in the monolayer system and in aqueous dispersions, in dependence on the subphase pH due to protonation or deprotonation of the primary amine in the lipid head group. Thermodynamic data derived from pi-A isotherms provide information about the critical temperature (Tc), which is in rough agreement with the temperature of the lipid phase transition from gel to fluid state (Tm) found by X-ray and calorimetry studies of AHHP aqueous dispersions. The packing properties of the molecules in mono- and bilayer systems are very similar. DNA couples to the monolayer of the new lipid at low as well as at high pH but in different amounts. The DNA coupling leads to an alignment of adsorbed DNA strands indicated by the appearance of a Bragg peak. The distance between aligned DNA strands does not change much with increasing monolayer pressure.

DNA molecules are useful building blocks and nanotemplates for controllable fabrication of various bioinorganic nanostructures due to their unique physical-chemical properties and recognition capabilities and the synthetic availability of desired nucleotide sequences and length. We have synthesized novel DNA complexes with positively charged, highly luminescent CdSe nanorods that can be self-organized into filamentary, netlike, or spheroidal nanostructures. DNA-CdSe-nanorod filaments possess strongly linearly polarized photoluminescence due to the unidirectional orientation of nanorods along the filaments., (Copyright 2004 American Chemical Society)

The formation of DNA complexes with Langmuir monolayers of the cationic lipid octadecylamine (ODA) and the new amphiphilic polycation poly-4-vinylpyridine with 16% of cetylpyridinium groups (PVP-16) on the surface of an aqueous solution of native DNA of low ionic strength was studied. Topographic images of Langmuir-Blodgett films of DNA/ODA and DNA/PVP-16 complexes applied to micaceous substrates were investigated by the method of atomic force microscopy. It was found that films of the amphiphilic polycation have an ordered planar polycrystalline structure. The morphology of planar DNA complexes with the amphiphilic cation substantially depended on the incubation time and the phase state of the monolayer on the surface of the aqueous DNA solution. Complex structures and individual DNA molecules were observed on the surface of the amphiphilic monolayer. Along with quasi-linear individual bound DNA molecules, characteristic extended net-like structures and quasi-circular toroidal condensed conformations of planar DNA complexes were detected. Mono- and multilayer films of DNA/PVP-16 complexes were used as templates and nanoreactors for the synthesis of inorganic nanostructures via the binding of metal cations from the solution and subsequent generation of the inorganic phase. As a result, ultrathin polymeric composite films with integrated DNA building blocks and quasi-linear arrays of inorganic semiconductor (CdS) and iron oxide nanoparticles and nanowires were obtained. The nanostructures obtained were characterized by scanning probe microscopy and transmission electron microscopy techniques. The methods developed are promising for investigating the mechanisms of structural organization and transformation in DNA and polyelectrolyte complexes at the gas-liquid interface and for the design of new extremely thin highly ordered planar polymeric and composite materials, films, and coatings with controlled ultrastructure for applications in nanoelectronics and nanobiotechnology.