Search

Industrialization has led to environmental pollution with various hazardous chemicals including pollution with metals. In this regard, the development of highly efficient analytical methods for their determination has received considerable attention to ensure public safety. Currently, scientists are paying more and more attention to the automation of analytical methods, since it permits fast, accurate, and sensitive analysis with minimal exposure of analysts to hazardous substances. This review discusses the automated methods with fluorescent detection developed for metal determination since 2000. It is evident that flow-injection analysis (FIA) with no preconcentration or with solid-phase preconcentration are predominant compared to liquid-phase preconcentration systems. FIA systems are also more widespread than sequential injection analysis (SIA) systems. Moreover, a significant number of works have been devoted to chromatography-based methods. Atomic fluorescence detectors significantly prevail over molecular fluorescence detectors. It must be highlighted that most of the methods result in good figures of merit and performance characteristics, demonstrating their superiority in comparison with manual systems. [ABSTRACT FROM AUTHOR]

Thallium is an accumulative highly toxic metal, that can be present in environmental samples due to industrial pollution and is dangerous for living organisms. Thus, its determination at trace levels is necessary. The lab-in-syringe (LIS) is considered to be a simple, functional, and versatile, technique that combines operational concepts and flow and sequential injection analysis. In this study, a liquid-phase microextraction LIS system was developed as a front-end to flame atomic absorption spectrometry (FAAS) for the determination of thallium in water samples. The proposed approach is based on the formation of Tl(III) ammonium–pyrrolidine–dithiocarbamate complex followed by its extraction using di-isobutyl-ketone. These procedures take place within the syringe barrel of the LIS system. The limit of detection of the developed method was 2.1 µg L−1 with a linear range from 7.0 to 400 µg L−1. The relative standard deviation (RSD) was 3.9% (at 50.0 µg L−1 Tl(I)), demonstrating good precision. Moreover, good method accuracy was obtained since the relative recovery values were within the range of 93.4–101.2%. Finally, reliable method applicability and green merits were demonstrated using the blue applicability grade index and green analytical procedure index, respectively. The proposed method was used for the analysis of environmental water samples. [ABSTRACT FROM AUTHOR]

A novel simple sensitive and effective on-line flow injection column preconcentration platform using poly-tetrafluoroethylene turnings as sorbent was developed prior to flame atomic absorption spectrometric (FAAS) determination of palladium in vehicle exhaust catalysts, hydrogenation catalysts and environmental water samples. The method is based on the sorption of palladium(II)-diethyldithiophosphate, which was found to be more effective than dithiocarbamate ones. Methyl isobutyl ketone (MIBK) was used as eluent prior atomisation and quantification. All parameters like pH, DDPA concentration, flow rates, preconcentration time that affect the sensitivity of the method as well as interferences of other metals were investigated in detail. The enhancement factor calculated as 114 for 60 s preconcentration time while the sampling frequency as 40 h−1. The detection limit was 0.9 μg L−1 and the relative standard deviation (RSD) was 2.8% at 20.0 μg L−1 concentration level. The accuracy of the proposed method was estimated by analysing certified reference material and spiked environmental samples. The analytical features of the method were compared with other on-line column preconcentration methods reported in the literature. [ABSTRACT FROM AUTHOR]