Search

© 2022 The Authors. ChemBioChem published by Wiley-VCH GmbH. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited., BP100 is a cationic undecamer peptide with antimicrobial and cell-penetrating activities. The orientation of this amphiphilic α-helix in lipid bilayers was examined under numerous conditions using solid-state 19F, 15N and 2H NMR. At high temperatures in saturated phosphatidylcholine lipids, BP100 lies flat on the membrane surface, as expected. Upon lowering the temperature towards the lipid phase transition, the helix is found to flip into an upright transmembrane orientation. In thin bilayers, this inserted state was stable at low peptide concentration, but thicker membranes required higher peptide concentrations. In the presence of lysolipids, the inserted state prevailed even at high temperature. Molecular dynamics simulations suggest that BP100 monomer insertion can be stabilized by snorkeling lysine side chains. These results demonstrate that even a very short helix like BP100 can span (and thereby penetrate through) a cellular membrane under suitable conditions., We acknowledge financial support for NMR hardware from the German Research Foundation (DFG) project “INST 121384/58-1 FUGG”. This work was also supported financially by the Helmholtz Association Program BIF-TM, by the DFG grant UL127/7-1, by the DAAD “Portugal-Acções Integradas Luso-Alemãs/DAAD-GRICES” grant D/07/13644, and by the Fundação para a Ciência e a Tecnologia grant SFRH/BD/24778/2005. Open Access funding enabled and organized by Projekt DEAL.

The twin arginine translocase (Tat) exports folded proteins across bacterial membranes. The putative pore-forming or membrane-weakening component (TatA

Chiral magnetic materials are proposed for applications in second‐order non‐linear optics, magneto‐chiral dichroism, among others. Recently, we have reported a set of tetra‐nuclear Fe(II) grid complex conformers with general formula C/S‐[Fe4L4]8+ (L: 2,6‐bis(6‐(pyrazol‐1‐yl)pyridin‐2‐yl)‐1,5‐dihydrobenzo[1,2‐d : 4,5‐d′]diimidazole). In the grid complexes, isomerism emerges from tautomerism and conformational isomerism of the ligand L, and the S‐type grid complex is chiral, which originates from different non‐centrosymmetric spatial organization of the trans type ligand around the Fe(II) center. However, the selective preparation of an enantiomerically pure grid complex in a controlled manner is difficult due to spontaneous self‐assembly. To achieve the pre‐synthesis programmable resolution of Fe(II) grid complexes, we designed and synthesized two novel intrinsically chiral ligands by appending chiral moieties to the parent ligand. The complexation of these chiral ligands with Fe(II) salt resulted in the formation of enantiomerically pure Fe(II) grid complexes, as unambiguously elucidated by CD and XRD studies. The enantiomeric complexes exhibited similar gradual and half‐complete thermal and photo‐induced SCO characteristics. The good agreement between the experimentally obtained and calculated CD spectra further supports the enantiomeric purity of the complexes and even the magnetic studies. The chiral resolution of Fe(II)‐ [2×2] grid complexes reported in this study, for the first time, might enable the fabrication of magneto‐chiral molecular devices., The trans ‐type ligand wrapping around the metal centers in an inter‐woven style makes the complex to be in chiral. This separation of Λ and Δ forms of spin‐crossover isomers was successfully achieved by appending the chiral moiety onto the parent ligand. The presence of spin‐crossover and chirality makes these multifunctional complexes intriguing for the study of magneto‐optical effects.

A labeling strategy for in vivo

Pinholin S2168 triggers the lytic cycle of bacteriophage φ21 in infected Escherichia coli. Activated transmembrane dimers oligomerize into small holes and uncouple the proton gradient. Transmembrane domain 1 (TMD1) regulates this activity, while TMD2 is postulated to form the actual “pinholes.” Focusing on the TMD2 fragment, we used synchrotron radiation-based circular dichroism to confirm its α-helical conformation and transmembrane alignment. Solid-state 15N-NMR in oriented DMPC bilayers yielded a helix tilt angle of τ = 14°, a high order parameter (Smol = 0.9), and revealed the azimuthal angle. The resulting rotational orientation places an extended glycine zipper motif (G40xxxS44xxxG48) together with a patch of H-bonding residues (T51, T54, N55) sideways along TMD2, available for helix–helix interactions. Using fluorescence vesicle leakage assays, we demonstrate that TMD2 forms stable holes with an estimated diameter of 2 nm, as long as the glycine zipper motif remains intact. Based on our experimental data, we suggest structural models for the oligomeric pinhole (right-handed heptameric TMD2 bundle), for the active dimer (right-handed Gly-zipped TMD2/TMD2 dimer), and for the full-length pinholin protein before being triggered (Gly-zipped TMD2/TMD1-TMD1/TMD2 dimer in a line).

Fluorographene (FG) ultra-thin films are directly grown on flexible and non-flexible insulating silicate substrates and are characterized in terms of their structural and electronic properties. FG ...

Solid-state 19 F NMR is a powerful method to study the interactions of biologically active peptides with membranes. So far, in labelled peptides, the 19 F-reporter group has always been installed on the side chain of an amino acid. Given the fact that monofluoroalkenes are non-hydrolyzable peptide bond mimics, we have synthesized a monofluoroalkene-based dipeptide isostere, Val-Ψ[(Z)-CF=CH]-Gly, and inserted it in the sequence of two well-studied antimicrobial peptides: PGLa and (KIGAKI)3 are representatives of an α-helix and a β-sheet. The conformations and biological activities of these labeled peptides were studied to assess the suitability of monofluoroalkenes for 19 F NMR structure analysis.

An in vivo study of a photoswitchable cytotoxic peptide LMB040 has been undertaken on a chemically induced hepatocellular carcinoma model in immunocompetent rats. We analysed the pharmacokinetic profile of the less toxic photoform (“ring-closed” dithienylethene) of the compound in tumors, plasma, and healthy liver. Accordingly, the peptide can reach a tumor concentration sufficiently high to exert a cytotoxic effect upon photoconversion into the more active (“ring-open”) photoform. Tissue morphology, histology, redox state of the liver, and hepatic biochemical parameters in blood serum were analysed upon treatment with (i) the less active photoform, (ii) the in vivo light-activated alternative photoform, and (iii) compared with a reference chemotherapeutic 5-fluorouracil. We found that application of the less toxic form followed by a delayed in vivo photoconversion into the more toxic ring-open form of LMB040 led to a higher overall survival of the animals, and signs of enhanced immune response were observed compared to the untreated animals.

Circular dichroism is a conventional method for studying the secondary structures of peptides and proteins and their transitions. While certain circular dichroism features are characteristic of α-helices and β-strands, the third most abundant secondary structure, the polyproline-II helix, does not exhibit a strictly conserved spectroscopic appearance. Due to its extended nature, the polyproline-II helix is highly accessible to the surrounding solvent; thus, the environment has a critical influence on the lineshape of the circular dichroism spectra of this structure. To showcase possible effects due to the medium, in this work, we report an experimental spectroscopic study of polyproline-II-forming oligomeric peptides in various environments: solvents, detergent micelles, and liposomes. Strikingly, the examination of an oligomeric peptide in a solvent series showed a remarkable 7 nm solvatochromic shift in the main negative band starting with hexafluoropropan-2-ol and moving to hexane. Furthermore, a previously predicted positive band below 200 nm was discovered in the spectra in nonpolar environments. In isotropic liposomes, the expected transition to the transmembrane state correlated with the appearance of a positive band at 228 nm. Our results demonstrate that changes in solvation should be taken into consideration when assessing the circular dichroism spectra of peptides expected to adopt the polyproline-II conformation. Although this precaution may complicate spectral analysis, characterization of solvent-induced spectral changes can generate new opportunities for testing the location of peptides in complex systems such as micelles or lipid bilayers.

A bicyclic peptide scaffold was chemically adapted to generate diarylethene‐based photoswitchable inhibitors of serine protease Bos taurus trypsin 1 (T1). Starting from a prototype molecule—sunflower trypsin inhibitor‐1 (SFTI‐1)—we obtained light‐controllable inhibitors of T1 with Ki in the low nanomolar range, whose activity could be modulated over 20‐fold by irradiation. The inhibitory potency as well as resistance to proteolytic degradation were systematically studied on a series of 17 SFTI‐1 analogues. The hydrogen bond network that stabilizes the structure of inhibitors and possibly the enzyme–inhibitor binding dynamics were affected by isomerization of the photoswitch. The feasibility of manipulating enzyme activity in time and space was demonstrated by controlled digestion of gelatin‐based hydrogel and an antimicrobial peptide BP100‐RW. Finally, our design principles of diarylethene photoswitches are shown to apply also for the development of other serine protease inhibitors., Bicyclic diarylethene‐containing analogues of the sunflower trypsin inhibitor‐1 (SFTI‐1) can modulate activity of serine proteases in the nanomolar–micromolar range in highly efficient photocontrollable manner.

A simple model of an uncharged antimicrobial peptide, carrying four crown ether side chains, is modified further by the selective incorporation of arginine side chains to control its secondary structure and its interaction with model membranes and living cells. Conformational studies show that shifting the position of a cationic residue in the peptide sequence allows to control its secondary structure and supramolecular self-assembly in solution. Results also demonstrate that the secondary structure influences the interaction with model membranes and cells. An α-helical peptide with greater amphiphilicity forms assemblies that interact with both prokaryotic and eukaryotic model membranes and cells. However, a β-stranded peptide with evenly distributed charges generates assemblies that interact more selectively with prokaryotic model membranes and cells. In addition, we observed differences in peptide orientation between uncharged and cationic α-helical peptides with different phospholipid bilayers. In general, the studied peptides have a higher affinity for thinner membranes, and cationic peptides interacted better with anionic membranes.

Our understanding of protein folds relies fundamentally on the set of secondary structures found in the proteomes. Yet, there also exist intriguing structures and motifs that are underrepresented in natural biopolymeric systems. One example is the polyproline II helix, which is usually considered to have a polar character and therefore does not form membrane spanning sections of membrane proteins. In our work, we have introduced specially designed polyproline II helices into the hydrophobic membrane milieu and used 19F NMR to monitor the helix alignment in oriented lipid bilayers. Our results show that these artificial hydrophobic peptides can adopt several different alignment states. If the helix is shorter than the thickness of the hydrophobic core of the membrane, it is submerged into the bilayer with its long axis parallel to the membrane plane. The polyproline helix adopts a transmembrane alignment when its length exceeds the bilayer thickness. If the peptide length roughly matches the lipid thickness, a coexistence of both states is observed. We thus show that the lipid thickness plays a determining role in the occurrence of a transmembrane polyproline II helix. We also found that the adaptation of polyproline II helices to hydrophobic mismatch is in some notable aspects different from α-helices. Finally, our results prove that the polyproline II helix is a competent structure for the construction of transmembrane peptide segments, despite the fact that no such motif has ever been reported in natural systems.

The activity of local anesthetics (LAs) has been attributed to the inhibition of ion channels, causing anesthesia. However, there is a growing body of research showing that LAs act on a wide range of receptors and channel proteins far beyond simple analgesia. The current concept of ligand recognition may no longer explain the multitude of protein targets influenced by LAs. We hypothesize that LAs can cause anesthesia without directly binding to the receptor proteins just by changing the physical properties of the lipid bilayer surrounding these proteins and ion channels based on LAs’ amphiphilicity. It is possible that LAs act in one of the following ways: They 1) dissolve raft-like membrane microdomains, 2) impede nerve impulse propagation by lowering the lipid phase transition temperature, or 3) modulate the lateral pressure profile of the lipid bilayer. This could also explain the numerous additional effects of LAs besides anesthesia. Furthermore, the concepts of membrane-mediated activity and binding to ion channels do not have to exclude each other. If we were to consider LA as the middle part of a continuum between unspecific membrane-mediated activity on one end and highly specific ligand binding on the other end, we could describe LA as the link between the unspecific action of general anesthetics and toxins with their highly specific receptor binding. This comprehensive membrane-mediated model offers a fresh perspective to clinical and pharmaceutical research and therapeutic applications of local anesthetics. SIGNIFICANCE STATEMENT Local anesthetics, according to the World Health Organization, belong to the most important drugs available to mankind. Their rediscovery as therapeutics and not only anesthetics marks a milestone in global pain therapy. The membrane-mediated mechanism of action proposed in this review can explain their puzzling variety of target proteins and their thus far inexplicable therapeutic effects. The new concept presented here places LAs on a continuum of structures and molecular mechanisms in between small general anesthetics and the more complex molecular toxins.

Science advances 7(27), eabh3805 (1-19) (2021). doi:10.1126/sciadv.abh3805, Because of its small size (70 kilodalton) and large content of structural disorder (>50%), the human growth hormone receptor (hGHR) falls between the cracks of conventional high-resolution structural biology methods. Here, we study the structure of the full-length hGHR in nanodiscs with small-angle x-ray scattering (SAXS) as the foundation. We develop an approach that combines SAXS, x-ray diffraction, and NMR spectroscopy data obtained on individual domains and integrate these through molecular dynamics simulations to interpret SAXS data on the full-length hGHR in nanodiscs. The hGHR domains reorient freely, resulting in a broad structural ensemble, emphasizing the need to take an ensemble view on signaling of relevance to disease states. The structure provides the first experimental model of any full-length cytokine receptor in a lipid membrane and exemplifies how integrating experimental data from several techniques computationally may access structures of membrane proteins with long, disordered regions, a widespread phenomenon in biology., Published by Assoc., Washington, DC [u.a.]

In this chapter we give an overview of the use of 19F NMR for the study of biomembranes. Due to its unique sensitivity and small size, fluorine may be considered to bridge the gap between NMR on the one hand, and ESR and fluorescence on the other hand. Conventional NMR isotope labels do not alter the studied molecules but possess only low sensitivity, while ESR and fluorescence labels provide higher sensitivity but also represent a larger modification of the system of interest. The high sensitivity to its environment, large anisotropies and strong dipolar couplings render 19 F a useful NMR label to probe structure and dynamics in biomembranes, and to study intermolecular interactions. Fluorine has been introduced into numerous constituents of biomembranes, such as lipids, sterols as well as membrane associated peptides and integral membrane proteins. In particular, a growing set of fluorine-labeled amino acids has allowed one to address selected structural information in membrane proteins and peptides. The large anisotropy of 19F NMR interactions in the solid-state has been used to measure molecular orientations with respect to the membrane normal, allowing characterization, for example, of the function of membrane-active peptides. Distance measurements exploring the large distance range of 19F have been beneficial in the study of intermolecular interactions, to reveal oligomeric architectures of membrane proteins and/or transmembrane peptides. The sensitivity of the 19F chemical shift to the environment makes it possible to probe the molecular environment and detect even solvent isotope effects, this way revealing conformational changes and solvent/lipid accessibilities. Given the constraints in placing fluorine into biomembranes and embedded molecules, 19F NMR may not be a universal technique, but it certainly provides a powerful tool to answer specific questions regarding the structure and dynamics in biomembranes that would be difficult to solve otherwise.

Pinholin S(21)68 triggers the lytic cycle of bacteriophage φ21 in infected Escherichia coli. Activated transmembrane dimers oligomerize into small holes and uncouple the proton gradient. Transmembrane domain 1 (TMD1) regulates this activity, while TMD2 is postulated to form the actual “pinholes.” Focusing on the TMD2 fragment, we used synchrotron radiation-based circular dichroism to confirm its α-helical conformation and transmembrane alignment. Solid-state (15)N-NMR in oriented DMPC bilayers yielded a helix tilt angle of τ = 14°, a high order parameter (S(mol) = 0.9), and revealed the azimuthal angle. The resulting rotational orientation places an extended glycine zipper motif (G(40)xxxS(44)xxxG(48)) together with a patch of H-bonding residues (T(51), T(54), N(55)) sideways along TMD2, available for helix–helix interactions. Using fluorescence vesicle leakage assays, we demonstrate that TMD2 forms stable holes with an estimated diameter of 2 nm, as long as the glycine zipper motif remains intact. Based on our experimental data, we suggest structural models for the oligomeric pinhole (right-handed heptameric TMD2 bundle), for the active dimer (right-handed Gly-zipped TMD2/TMD2 dimer), and for the full-length pinholin protein before being triggered (Gly-zipped TMD2/TMD1-TMD1/TMD2 dimer in a line).

BP100 is a short, designer-made membrane-active peptide with multiple functionalities: antimicrobial, cell-penetrating, and fusogenic. Consisting of five lysines and 6 hydrophobic residues, BP100 was shown to bind to lipid bilayers as an amphipathic α-helix, but its mechanism of action remains unclear. With these features, BP100 embodies the characteristics of two distinctly different classes of membrane-active peptides, which have been studied in detail and where the mechanism of action is better understood. On the one hand, its amphiphilic helical structure is similar to the pore forming magainin family of antimicrobial peptides, though BP100 is much too short to span the membrane. On the other hand, its length and high charge density are reminiscent of the HIV-TAT family of cell penetrating peptides, for which inverted micelles have been postulated as translocation intermediates, amongst other mechanisms. Assays were performed to test the antimicrobial and hemolytic activity, the induced leakage and fusion of lipid vesicles, and cell uptake. From these results the functional profiles of BP100, HIV-TAT, and the magainin-like peptides magainin 2, PGLa, MSI-103, and MAP were determined and compared. It is observed that the activity of BP100 resembles most closely the much longer amphipathic α-helical magainin-like peptides, with high antimicrobial activity along with considerable fusogenic and hemolytic effects. In contrast, HIV-TAT shows almost no antimicrobial, fusogenic, or hemolytic effects. We conclude that the amphipathic helix of BP100 has a similar membrane-based activity as magainin-like peptides and may have a similar mechanism of action.

Despite the many physiological and pathophysiological functions of the human growth hormone receptor (hGHR), a detailed understanding of itsmodus operandiis hindered by the lack of structural information of the entire receptor at the molecular level. Due to its relatively small size (70 kDa) and large content of structural disorder (>50%), this membrane protein falls between the cracks of conventional high-resolution structural biology methods. Here, we study the structure of the full-length hGHR in nanodiscs with small angle-X-ray scattering (SAXS) as the foundation. We developed an approach in which we combined SAXS, X-ray diffraction and NMR spectroscopy obtained on the individual domains and integrated the data through molecular dynamics simulations to interpret SAXS data on the full-length hGHR in nanodiscs. The structure of the hGHR was determined in its monomeric state and provides the first experimental model of any full-length cytokine receptor in a lipid membrane. Combined, our results highlight that the three domains of the hGHR are free to reorient relative to each other, resulting in a broad structural ensemble. Our work exemplifies how integrating experimental data from several techniques computationally, may enable the characterization of otherwise inaccessible structures of membrane proteins with long disordered regions, a widespread phenomenon in biology. To understand orchestration of cellular signaling by disordered chains, the hGHR is archetypal and its structure emphasizes that we need to take a much broader, ensemble view on signaling.

Analogs of the known inhibitor (peptide pDI) of the p53/MDM2 protein–protein interaction are reported, which are stapled by linkers bearing a photoisomerizable diarylethene moiety. The corresponding photoisomers possess significantly different affinities to the p53-interacting domain of the human MDM2. Apparent dissociation constants are in the picomolar-to-low nanomolar range for those isomers with diarylethene in the “open” configuration, but up to eight times larger for the corresponding “closed” isomers. Spectroscopic, structural, and computational studies showed that the stapling linkers of the peptides contribute to their binding. Calorimetry revealed that the binding of the “closed” isomers is mostly enthalpy-driven, whereas the “open” photoforms bind to the protein stronger due to their increased binding entropy. The results suggest that conformational dynamics of the protein-peptide complexes may explain the differences in the thermodynamic profiles of the binding.

In this study, we investigate how the length of amphiphilic β-sheet forming peptides affects their interaction with membranes. Four polycationic model peptides with lengths from 6 to 18 amino acids were constructed from simple Lys-Leu repeats, giving [KL]n=3,5,7,9. We found that (1) they exhibit a pronounced antimicrobial activity with an intriguing length dependent maximum for [KL]5 with 10 amino acids; (2) their hemolytic effect, on the other hand, increases steadily with peptide length. CD analysis (3) and TEM (4) show that all peptides-except for the short [KL]3-aggregate into amyloid-like fibrils in the presence of phosphate ions, which in turn has a critical effect on the results in (1) and (2). In fact, (5) vesicle leakage reveals an intrinsic membrane-perturbing activity (at constant peptide mass) of [KL]5 > [KL]9 > [KL]7 in phosphate buffer, which changes to [KL]5 ≈ [KL]7 ≈ [KL]9 in PIPES. A specific interaction with phosphate ions thus explains the subtle balance between two counteracting effects: phosphate-induced unproductive pre-aggregation in solution versus monomeric membrane binding and vigorous lipid perturbation due to self-assembly of the bound peptides within the bilayer. This knowledge can now be used to control and optimize the peptides in further applications.

Solid-state NMR (SSNMR) is one of the most useful methods to investigate membrane-bound peptides and proteins, in order to elucidate the structural basis of their diverse biological functions. In the case of short peptides, SSNMR is now performed on a routine basis in several labs. By employing side-chain 19F- or 2H-isotope-labelled peptides in static oriented samples, SSNMR can provide information about conformation, alignment, dynamics, oligomerization, and aggregation behaviour. Changes in and transitions between these structural properties tend to be directly related to the functional mechanism of the peptides. Here, we present an easy-to-follow description of the methodological SSNMR approach in the form of flow charts. The successive steps needed, from peptide synthesis and functional tests, on to NMR sample preparation and NMR experiments, and further on to data analysis, are described. At each stage, questions to be answered and tasks to be performed are explained, and some representative results are illustrated. Relevant challenges and pitfalls are discussed, and possible reasons for problems and their possible solutions are considered.

The amphipathic α-helical antimicrobial peptide MSI-103 (aka KIA21) can form stable transmembrane pores when the bilayer takes on a positive spontaneous curvature, e.g. by the addition of lyso-lipids. Solid-state 31P- and 15N-NMR demonstrated an enrichment of lyso-lipids in these toroidal wormholes. Anionic lyso-lipids provided additional stabilization by electrostatic interactions with the cationic peptides. The remaining lipid matrix did not affect the nature of the pore, as peptides maintained the same orientation independent of lipid charge, and a change in membrane thickness did not considerably affect their tilt angle. Under optimized conditions (i.e. in the presence of lyso-lipids and appropriate bilayer thickness), stable and well-aligned pores could be obtained for solid-state 2H-NMR analysis. These data revealed for the first time the complete 3D alignment of this representative amphiphilic peptide in fluid membranes, which is compatible with either monomeric helices as constituents, or left-handed supercoiled dimers as building blocks from which the overall toroidal wormhole is assembled.

This study evaluates the embryotoxicity of dithienylethene-modified peptides upon photoswitching, using 19 analogues based on the β-hairpin scaffold of the natural membranolytic peptide gramicidin S. We established an in vivo assay in two variations (with ex vivo and in situ photoisomerization), using larvae of the model organism Danio rerio, and determined the toxicities of the peptides in terms of 50% lethal doses (LD50). This study allowed us to: (i) demonstrate the feasibility of evaluating peptide toxicity with D. rerio larvae at 3–4 days post fertilization, (ii) determine the phototherapeutic safety windows for all peptides, (iii) demonstrate photoswitching of the whole-body toxicity for the dithienylethene-modified peptides in vivo, (iv) re-analyze previous structure–toxicity relationship data, and (v) select promising candidates for potential clinical development.

The integration of functions in materials in order to gain macroscopic effects in response to environmental changes is an ongoing challenge in material science. Here, functions on different hierarchical levels are sequentially linked to translate a pH-triggered conformational transition from the molecular to the macroscopic level to induce directed movements in hydrogels. When the pH is increased, lysine-rich peptide molecules change their conformation into a β-hairpin structure because of the reduced electrostatic repulsion among the deprotonated amino groups. Coupled to this conformation change is the capability of the β-hairpin motifs to subsequently assemble into aggregates acting as reversible cross-links, which are used as controlling units to fix a temporary macroscopic shape. A structural function implemented into the hydrogel by a microporous architecture-enabled nondisruptive deformation upon compression by buckling of pore walls and their elastic recovery. Coupled to this structural function is the capability of the porous material to enhance the diffusion of ions into the hydrogel and to keep the dimension of the macroscopic systems almost constant when the additional cross-links are formed or cleaved as it limits the dimensional change of the pore walls. Covalent cross-linking of the hydrogel into a polymer network acted as gear shift to ensure translation of the function on the molecular level to the macroscopic dimension. In this way, the information of a directed shape-shift can be programmed into the material by mechanical deformation and pH-dependent formation of temporary net points. The information could be read out by lowering the pH. The peptides reverted back into their original random coil conformation and the porous polymer network could recover from the previously applied elastic deformation. The level of multifunctionality of the hydrogels can be increased by implementation of additional orthogonal functions such as antimicrobicity by proper selection of multifunctional peptides, which could enable sophisticated biomedical devices.

The membrane alignment of helical amphiphilic peptides in oriented phospholipid bilayers can be obtained as ensemble and time averages from solid state 2H NMR by fitting the quadrupolar splittings to ideal α-helices. At the same time, molecular dynamics (MD) simulations can provide atomistic insight into peptide–membrane systems. Here, we evaluate the potential of MD simulations to complement the experimental NMR data that is available on three exemplary systems: the natural antimicrobial peptide PGLa and the two designer-made peptides MSI-103 and KIA14, whose sequences were derived from PGLa. Each peptide was simulated for 1 μs in a DMPC lipid bilayer. We calculated from the MD simulations the local angles which define the side chain geometry with respect to the peptide helix. The peptide orientation was then calculated (i) directly from the simulation, (ii) from back-calculated MD-derived NMR splittings, and (iii) from experimental 2H NMR splittings. Our findings are that (1) the membrane orientation an...

Diarylethene derivatives, the biological activity of which can be reversibly changed by irradiation with light of different wavelengths, have shown promise as scientific tools and as candidates for photocontrollable drugs. However, examples demonstrating efficient photocontrol of their biological activity are still relatively rare. This concept article discusses the possible reasons for this situation and presents a critical analysis of existing data and hypotheses in this field, in order to extract the design principles enabling the construction of efficient photocontrollable diarylethene-based molecules. Papers addressing biologically relevant interactions between diarylethenes and biomolecules are analyzed; however, in most published cases, the efficiency of photocontrol in living systems remains to be demonstrated. We hope that this article will encourage further discussion of design principles, primarily among pharmacologists, synthetic and medicinal chemists.

Protein ORIGAMI (http://ibg.kit.edu/protein_origami) is a browser-based web application that allows the user to create straightforward 3D paper models of folded peptides for research, teaching and presentations. An amino acid sequence can be turned into α-helices, β-strands and random coils that can be printed out and folded into properly scaled models, with a color code denoting the biophysical characteristics of each amino acid residue (hydrophobicity, charge, etc.). These models provide an intuitive visual and tactile understanding of peptide interactions with other partners, such as helix-helix assembly, oligomerization, membrane binding, or pore formation. Helices can also be displayed as a helical wheel or helical mesh in 2D graphics, to be used in publications or presentations. The highly versatile programme Protein ORIGAMI is also suited to create less conventional helices with arbitrary pitch (e.g., 310 -helix, π-helix, or left-handed helices). Noncanonical amino acids, labels and different terminal modifications can be defined and displayed at will, and different protonation states can be shown. In addition to the web application, the program source code can be downloaded and installed locally on a PC. The printed paper models can be readily used for daily research and discussions, just as for educational purposes and teaching. © 2018 by The International Union of Biochemistry and Molecular Biology, 46:403-409, 2018.

The amphipathic a-helical peptide KIA14 [(KIAGKIA)(2)-NH2] was studied in membranes using circular dichroism and solid-state NMR spectroscopy to obtain global as well as local structural information. By analyzing H-2 NMR data from 10 analogues of KIA14 that were selectively labeled with Ala-d(3), those positions that are properly folded into a helix could be determined within the membrane-bound peptide. The N-terminus was found to be unraveled, whereas positions 4-14 formed an ideal helix all the way to the C-terminus. The helicity did not change when Gly residues were replaced by Ala-d3 but was reduced when Ile was replaced, indicating that large hydrophobic residues are required for membrane binding and helix formation. The reduced helicity was strongly correlated with a decrease in peptide-induced leakage from lipid vesicles. The orientation of the short KIA14 peptide was assessed in several lipid systems and compared with that of the longer KIA21 sequence [(KIAGKIA)(3)-NH2]. In 1,2-dioleoylsn-glycero-3-phosphatidylcholine, both peptides are aligned flat on the membrane surface, whereas in 1,2-dimyristoyl-sn-glycero3-phosphatidylcholine (DMPC)/1-myristoy1-2-hydroxy-sn-glycero-3-phosphatidylcholine (lyso-MPC) both are inserted into the membrane in an upright orientation. These two types of lipid systems had been selected for their strongly negative and positive spontaneous curvature, respectively. We propose that in these cases, the peptide orientation is largely determined by the lipid properties. On the other hand, in plain DMPC and 1,2-dilauroyl-sn-glycero-3-phosphatidylcholine, which have only a slight positive curvature, a marked difference in orientation is evident: the short KIA14 lies almost flat on the membrane surface, whereas the longer KIA21 is more tilted. We thus propose that out of the lipid systems tested here, DMPC (with hardly any curvature) is the least biased,lipid system in which peptide orientation and realignment can be studied, allowing to compare and discriminate the intrinsic effects of the properties of the peptides as such.

The third most abundant polypeptide conformation in nature, the polyproline-II helix, is a polar, extended secondary structure with a local organization stabilized by intercarbonyl interactions within the peptide chain. Here we design a hydrophobic polyproline-II helical peptide based on an oligomeric octahydroindole-2-carboxylic acid scaffold and demonstrate its transmembrane alignment in model lipid bilayers by means of solid-state 19F NMR. As result, we provide a first example of a purely artificial transmembrane peptide with a structural organization that is not based on hydrogen-bonding.