Search

Organic solar cells (OSCs) based on ADA-type (acceptor-donor-acceptor) non-fullerene acceptors (NFAs) exhibit improved power conversion efficiency (PCE) compared to the conventional fullerene-based analogues. The optoelectronic properties of OSC active layer blends are correlated to their underlying structural dynamics and therefore influence the device performance. Using synergistically different neutron spectroscopy techniques, we studied the dynamics of binary and ternary blends made of the NFAs O-IDTBR and O-IDFBR and the regioregular donor polymer P3HT. Deuteration was considered for a contrast variation purpose. In addition to shedding light on the miscibilty and alloying characters of the blends, a main outcome of this work is the evidenced similar dynamical response of the blend components. This finding is in contrast with our previous neutron spectroscopy and molecular dynamics studies of the fullerene-based blend P3HT:PCBM, where we highlighted distinct behaviors of P3HT and PCBM in terms of the vitrification/frustration of P3HT and the plasticization of PCBM by P3HT upon blending. Alike P3HT vitrification is not presently observed. The absence or the weak vitrification evidenced here is in line with recent reports and is likely related to the improved PCE exhibited by the ADA-type NFA-based OSCs.

We present a neutron spectroscopy based method to study quantitatively the partial miscibility and phase behaviour of an organic photovoltaic active layer made of conjugated polymer:small molecule blends, presently illustrated with the regio-random poly(3-hexylthiophene-2,5-diyl) and fullerene [6,6]-Phenyl C$_{61}$ butyric acid methyl ester (RRa-P3HT:PCBM) system. We perform both inelastic neutron scattering and quasi-elastic neutron scattering measurements to study the structural dynamics of blends of different compositions enabling us to resolve the phase behaviour. The difference of neutron cross sections between RRa-P3HT and PCBM, and the use of deuteration technique, offer a unique opportunity to probe the miscibility limit of fullerene in the amorphous polymer-rich phase and to tune the contrast between the polymer and the fullerene phases, respectively. Therefore, the proposed approach should be universal and relevant to study new non-fullerene acceptors that are closely related - in terms of chemical structures - to the polymer, where other conventional imaging and spectroscopic techniques present a poor contrast between the blend components.

The processability and optoelectronic properties of organic semiconductors can be tuned and manipulated via chemical design. The substitution of the popular alkyl side chains by oligoethers has recently been successful for applications such as bioelectronic sensors and photocatalytic hydrogen evolution. Beyond the differences in polarity, the carbon–oxygen bond in oligoethers is likely to render the system softer and more prone to dynamical disorder that can be detrimental to charge transport for example. In this context, we use neutron spectroscopy as a master method of probe, in addition to characterisation techniques such as X-ray diffraction, differential scanning calorimetry and polarized optical microscopy to study the effect of the substitution of n-hexyl (Hex) chains by triethylene glycol (TEG) chains on the structural dynamics of two organic semiconducting materials: a phenylene–bithiophene–phenylene (PTTP) small molecule and a fluorene-co-dibenzothiophene (FS) polymer. Counterintuitively, inelastic neutron scattering (INS) reveals a general softening of the modes of PTTP and FS materials with Hex chains, pointing towards an increased dynamical disorder in the Hex-based systems. However, temperature-dependent X-ray and neutron diffraction as well as INS and differential scanning calorimetry evidence an extra reversible transition close to room temperature for PTTP with TEG chains. The observed extra structural transition, which is not accompanied by a change in birefringence, can also be observed by quasi-elastic neutron scattering (QENS). A fastening of the TEG chains dynamics is observed in the case of PTTP and not FS. We therefore assign this transition to the melt of the TEG chains. Overall the TEG chains are promoting dynamical order at room temperature, but if crystallising, may introduce an extra reversible structural transition above room temperature leading to thermal instabilities. Ultimately, a deeper understanding of chain polarity and structural dynamics can help guide new materials design and navigate the intricate balance between electronic charge transport and aqueous swelling that is being sought for a number of emerging organic electronic and bioelectronic applications.

Hydrogen fuel can contribute as a masterpiece in conceiving a robust carbon-free economic puzzle if cleaner methods to produce hydrogen become technically efficient and economically viable. Organic photocatalytic materials such as conjugated microporous materials (CMPs) are potential attractive candidates for water splitting as their energy levels and optical band gap as well as porosity are tunable through chemical synthesis. The performances of CMPs depend also on the mass transfer of reactants, intermediates, and products. Here, we study the mass transfer of water (H2O and D2O) and of triethylamine, which is used as a hole scavenger for hydrogen evolution, by means of neutron spectroscopy. We find that the stiffness of the nodes of the CMPs is correlated with an increase in trapped water, reflected by motions too slow to be quantified by quasi-elastic neutron scattering (QENS). Our study highlights that the addition of the polar sulfone group results in additional interactions between water and the CMP, as evidenced by inelastic neutron scattering (INS), leading to changes in the translational diffusion of water, as determined from the QENS measurements. No changes in triethylamine motions could be observed within the CMPs from the present investigations.

The performance of photovoltaic devices based on blends of conjugated polymers with nonfullerene acceptors depends on the phase behavior and microstructure of the binary, which in turn depends on the chemical structures of the molecular components and the blend composition. We investigate the correlation between the molecular structure, composition, phase behavior, and device performance of a model system consisting of semicrystalline poly-3-hexylthiophene (P3HT) as the donor polymer and three nonfullerene acceptors, two of which (O-IDTBR/EH-IDTBR) have a planar core with different side chains and one (O-IDFBR) of which has a twisted core. We combine differential scanning calorimetry with optical measurements including UV–Vis spectroscopy, photoluminescence, spectroscopic ellipsometry, and Raman spectroscopy and photovoltaic device performance measurements, all at varying blend composition. For P3HT:IDTBR blends, the crystallinity of polymer and acceptor is preserved over a wide composition range and the blend displays a eutectic phase behavior, with the optimum solar cell composition lying close to the eutectic composition. For P3HT:IDFBR blends, increasing acceptor content disrupts the polymer crystallinity, and the optimum device composition appears to be limited by polymer connectivity rather than being linked to the eutectic composition. The optical probes allow us to probe both the crystalline and amorphous phases, clearly revealing the compositions at which component mixing disrupts crystallinity., E.R. is grateful to the Fonds de Recherche du Quebec-Nature et technologies (FRQNT) for a postdoctoral fellowship and acknowledges the financial support from the European Cooperation in Science and Technology. J.N. acknowledges the financial support from the Engineering and Physical Science Research Council (grants nos. EP/P005543/1, EP/ R023581/1, and EP/P032591/1) and from the European Research Council for funding (grant agreement no. 742708). J.N. and E.R. thank the Helmholtz Foundation for a Helmholtz International Fellow Award. A.A.Y.G. thanks the EPSRC for a postdoctoral fellowship award (grant no. EP/P00928X/1). The authors at ICMAB would like to acknowledge the financial support from the Spanish Ministry of Economy, Industry and Competitiveness through the “Severo Ocho” Program for Centers of Excellence in R&D (SEV-2015-0496) and project reference PGC2018-095411-B-I00 as well as the European Research Council (ERC) under grant agreement no. 648901. I.M. acknowledges funding from KAUST, as well as EPSRC Project EP/G037515/1, EP/M005143/1, ECFP7 Project SC2 (610115), and EP/N509486/1 for the financial support.

The quest for efficient and economically accessible cleaner methods to develop sustainable carbon-free energy sources induced a keen interest in the production of hydrogen fuel. This can be achieved via the water-splitting process and by exploiting solar energy. However, the use of adequate photocatalysts is required to reach this goal. Covalent triazine-based frameworks (CTFs) are potential target photocatalysts for water splitting. Both electronic and structural characteristics of CTFs, particularly energy levels, optical band gaps, and porosities are directly relevant to water splitting and can be engineered through chemical design. Porosity can, in principle, be beneficial to water splitting by providing a larger surface area for the catalytic reactions to take place. However, porosity can also affect both charge transport within the photocatalyst and mass transfer of both reactants and products, thus impacting the overall kinetics of the reaction. Here, we focus on the link between chemical design and water (reactant) mass transfer, which plays a key role in the water uptake process and the subsequent hydrogen generation in practice. We use neutron spectroscopy to study the mass transfer of water in two porous CTFs, CTF-CN and CTF-2, that differ in the polarity of their struts. Quasi-elastic neutron scattering is used to quantify the amount of bound water and the translational diffusion of water. Inelastic neutron scattering measurements complement the quasi-elastic neutron scattering study and provide insights into the softness of the CTF structures and the changes in librational degrees of freedom of water in the porous CTFs. We show that two different types of interaction between water and CTFs take place in CTF-CN and CTF-2. CTF-CN exhibits a smaller surface area and lower water uptake due to its softer structure than CTF-2. However, the polar cyano group interacts locally with water leading to a large amount of bound water and a strong rearrangement of the water hydration monolayer, while water diffusion in CTF-2 is principally impacted by microporosity. The current study leads to new insights into the structure-dynamics-property relationship of CTF photocatalysts that pave the road for a better understanding of the guest-host interaction on the basis of water-splitting applications.

The molecular dynamics of organic semiconductor blend layers are likely to affect the optoelectronic properties and the performance of devices such as solar cells. We study the dynamics (5-50 ps) of the poly(3-hexylthiophene) (P3HT): phenyl-C61-butyric acid methyl ester (PCBM) blend by time-of-flight quasi-elastic neutron scattering, at temperatures in the range 250-360 K, thus spanning the glass transition temperature region of the polymer and the operation temperature of an OPV device. The behavior of the QENS signal provides evidence for the vitrification of P3HT upon blending, especially above the glass transition temperature, and the plasticization of PCBM by P3HT, both dynamics occurring on the picosecond time scale.

The optoelectronic properties of blends of conjugated polymers and small molecules are likely to be affected by the molecular dynamics of the active layer components. We study the dynamics of regioregular poly(3-hexylthiophene) (P3HT):phenyl-C61-butyric acid methyl ester (PCBM) blends using molecular dynamics (MD) simulation on time scales up to 50 ns and in a temperature range of 250–360 K. First, we compare the MD results with quasi-elastic neutron-scattering (QENS) measurements. Experiment and simulation give evidence of the vitrification of P3HT upon blending and the plasticization of PCBM by P3HT. Second, we reconstruct the QENS signal based on the independent simulations of the three phases constituting the complex microstructure of such blends. Finally, we found that P3HT chains tend to wrap around PCBM molecules in the amorphous mixture of P3HT and PCBM; this molecular interaction between P3HT and PCBM is likely to be responsible for the observed frustration of P3HT, the plasticization of PCBM, and the partial miscibility of P3HT and PCBM.

We report the impact of the ternary solution phase behaviour on the film morphology and crystallization of a model polymer:fullerene system. We employ UV-Vis absorption spectroscopy, combined with sequential filtration and dilution, to establish the phase diagram for regio-random poly(3-hexylthiophene-2,5-diyl) and phenyl-C61-butyric acid methyl ester (PCBM) in chlorobenzene. Films are systematically cast from one- and two-phase regions decoupling homogeneous and heterogenous nucleation, and the role of pre-formed aggregates from solutions. Increasing annealing temperature from 120 to 200 °C reveals a highly non-monotonic nucleation profile with a maximum at 170 °C, while the crystal growth rate increases monotonically. UV ozonolysis is employed to vary substrate energy, and found to increase nucleation rate and to promote a binary crystallization process. As previously found, exposure to light, under an inert atmosphere, effectively suppresses homogeneous nucleation; however, it has a considerably smaller effect on heterogeneous nucleation, either from solution aggregates or substrate-driven. Our results establish a quantitative link between solution thermodynamics, crystallization and provide insight into morphological design based on processing parameters in a proxy organic photovoltaic system.

Novel optoelectronic devices rely on complex nanomaterial systems where the nanoscale morphology and local chemical composition are critical to performance. However, the lack of analytical techniques that can directly probe these structure–property relationships at the nanoscale presents a major obstacle to device development. In this work, we present a novel method for non-destructive, simultaneous mapping of the morphology, chemical composition and photoelectrical properties with

The microstructure of blend fi lms of conjugated polymer and fullerene, especially the degree of mixing and crystallization, impacts the performance of organic photovoltaic devices considerably. Mixing and crystallization affect device performance in different ways. These phenomena are not easy to screen using traditional methods such as imaging. In this paper, the amorphous regiorandom poly(3-hexylthiophene) is blended with the potentially crystalline fullerene [6,6]-phenyl-C61-butyric acid methyl ester PCBM and the amorphous bis-adduct. First, the degree of mixing of polymer: fullerene blends is evaluated using UV-Vis absorption, steady-state and ultra-fast photoluminescence spectroscopy. The blue-shift of the polymer emission and absorption onset are used in combination with the saturation of the polymer emission decay time upon fullerene addition in order to infer the onset of aggregation of the blends. Second, the crystallinity of the fullerene is probed using variable angle spectroscopic ellipsometry (VASE), electroluminescence and photoluminescence spectroscopy. It is shown that the red-shift of charge transfer emission in the case of PCBM based blends cannot be explained solely by a variation of optical dielectric constant as probed by VASE. A combination of optical spectroscopy techniques, therefore, allows to probe the degree of mixing and can also distinguish between aggregation and crystallization of fullerenes.

We use grazing-incidence wide-angle X-ray scattering (GIWAXS) and molecular modeling to understand the difference in crystallization of several cyclopentadithiophene–benzothiadiazole polymer derivatives. We observe using GIWAXS that when the carbon bridging atom is substituted by a silicon atom, the π–π stacking distance is decreased while the lamellar stacking distance is increased. Using molecular modeling, we calculate the potential energy surfaces of an ordered array of oligomers as a function of π–π stacking and lamellar stacking distances and find two local minima for both the carbon and silicon analogues. This finding is consistent with the GIWAXS observations. We suggest that it may be possible to crystallize the carbon and silicon versions in the same crystal structure by varying the processing conditions. We derive new potential parameters from quantum chemical calculations for side chains motions and implement those within a new force field for molecular dynamics. We find that the side chains a...

Block copolymers have the potential to self-assemble into thermodynamically stable nanostructures that are desirable for plastic electronic materials with prolonged lifetimes. Fulfillment of this potential requires the simultaneous optimisation of the spatial organisation and phase behaviour of heterogeneous thin films at the nanoscale. We demonstrate the controlled assembly of an all-conjugated diblock copolymer blended with fullerene. The crystallinity, nanophase separated morphology, and microscopic features are characterised for blends of poly(3-hexylthiophene-block-3-(2-ethylhexyl) thiophene) (P3HT-b-P3EHT) and phenyl-C61-butyric acid methyl ester (PCBM), with PCBM fractions varying from 0–65 wt%. We find that PCBM induces the P3HT block to crystallise, causing nanophase separation of the block copolymer. Resulting nanostructures range from ordered (lamellae) to disordered, depending on the amount of PCBM. We identify the key design parameters and propose a general mechanism for controlling thin film structure and crystallinity during the processing of semicrystalline block copolymers.

To interpret ultrafast dynamics experiments on large molecules, computer simulation is required due to the complex response to the laser field. We present a method capable of efficiently computing the static electronic response of large systems to external electric fields. This is achieved by extending the density-functional tight binding method to include larger basis sets and by multipole expansion of the charge density into electrostatically interacting Gaussian distributions. Polarizabilities for a range of hydrocarbon molecules are computed for a multipole expansion up to quadrupole order, giving excellent agreement with experimental values, with average errors similar to those from density functional theory, but at a small fraction of the cost. We apply the model in conjunction with the polarizable-point-dipoles model to estimate the internal fields in amorphous poly(3-hexylthiophene-2,5-diyl).

We analyze the voltage losses at open circuit in solution-processed, small-molecule:fullerene blend solar cells, using electroluminescence and external quantum efficiency measurements and the reciprocity relationship between light absorption and emission. For solar cells made from oligo-thienylenevinylene-based donors and phenyl-C71butyric acid methyl ester (PC71BM), we find that the voltage loss due to the finite breadth of the absorption edge is remarkably small, less than 0.01 eV in the best cases, while the voltage loss due to nonradiative recombination reaches 0.29 eV, one of the smallest values reported for an organic solar cell. As a result, the open-circuit voltage reaches around 1.0 V for an optical gap of 1.6 eV, greatly exceeding the voltage of a high-performance polymer-based system with similar optical gap. We assign the remarkably small absorption broadening loss to a low degree of energetic disorder in the small-molecule system that allows efficient charge separation at a lower driving force than in typical conjugated polymer blends.

The bis and tris adducts of [6,6]phenyl-C(61)-butyric acid methyl ester (PCBM) offer lower reduction potentials than PCBM and are therefore expected to offer larger open-circuit voltages and more efficient energy conversion when blended with conjugated polymers in photovoltaic devices in place of PCBM. However, poor photovoltaic device performances are commonly observed when PCBM is replaced with higher-adduct fullerenes. In this work, we use transmission electron microscopy (TEM), steady-state and ultrafast time-resolved photoluminescence spectroscopy (PL), and differential scanning calorimetry (DSC) to probe the microstructural properties of blend films of poly(3-hexylthiophene-2,5-diyl) (P3HT) with the bis and tris adducts of PCBM. TEM and PL indicate that, in as-spun blend films, fullerenes become less soluble in P3HT as the number of adducts increases. PL indicates that upon annealing crystallization leads to phase separation in P3HT:PCBM samples only. DSC studies indicate that the interactions between P3HT and the fullerene become weaker with higher-adduct fullerenes and that all systems exhibit eutectic phase behavior with a eutectic composition being shifted to higher molar fullerene content for higher-adduct fullerenes. We propose two different mechanisms of microstructure development for PCBM and higher-adduct fullerenes. P3HT:PCBM blends, phase segregation is the result of crystallization of either one or both components and is facilitated by thermal treatments. In contrast, for blends containing higher adducts, the phase separation is due to a partial demixing of the amorphous phases. We rationalize the lower photocurrent generation by the higher-adduct fullerene blends in terms of film microstructure.

The dynamics of conjugated polymers are known to influence the performance of optoelectronic devices. Polyalkylthiophenes are a widely studied class of conjugated polymers, which exhibit a glass transition around room temperature and consequently are sensitive to temperature variations. We studied the dynamics of two polyalkylthiophenes of different side chain lengths (hexyl and octyl) as a function of temperature, by comparing their quasi-elastic neutron scattering (QENS) with molecular dynamics simulations (MD). We found a good agreement between the simulated and experimental data within the explored time window (of ∼4 ns), demonstrating that the force fields used in MD simulations are appropriate and that the QENS technique can be used as a validation of such force fields. Using MD allows us to identify and to assign contributions to the QENS signal from different parts of the polymers and to determine the activation energies of the different motions.

Strong electron-phonon coupling leads to polaron localization in molecular semiconductor materials and influences charge transport, but it is expensive to calculate atomistically. Here, we propose a simple and efficient model to determine the energy and spatial extent of polaron states within a coarse-grained representation of a disordered molecular film. We calculate the electronic structure of the molecular assembly using a tight-binding Hamiltonian and determine the polaron state self-consistently by perturbing the site energies by the dielectric response of the surrounding medium to the charge. When applied to fullerene derivatives, the method shows that polarons extend over multiple molecules in C60 but localize on single molecules in higher adducts of phenyl-C61-butyric-acid-methyl-ester (PCBM) because of packing disorder and the polar side chains. In PCBM, polarons localize on single molecules only when energetic disorder is included or when the fullerene is dispersed in a blend. The method helps to establish the conditions under which a hopping transport model is justified.

Herein, we present the synthesis and characterization of four conjugated polymers containing a novel chromophore for organic electronics based on an indigoid structure. These polymers exhibit extremely small band gaps of ∼1.2 eV, impressive crystallinity, and extremely high n-type mobility exceeding 3 cm2 V s–1. The n-type charge carrier mobility can be correlated with the remarkably high crystallinity along the polymer backbone having a correlation length in excess of 20 nm. Theoretical analysis reveals that the novel polymers have highly rigid nonplanar geometries demonstrating that backbone planarity is not a prerequisite for either narrow band gap materials or ultrahigh mobilities. Furthermore, the variation in backbone crystallinity is dependent on the choice of comonomer. OPV device efficiencies up to 4.1% and charge photogeneration up to 1000 nm are demonstrated, highlighting the potential of this novel chromophore class in high-performance organic electronics.

Structure–property–activity relationships in solution processable polymer photocatalysts for hydrogen production from water were probed by varying the chemical structure of both the polymer side-chains and the polymer backbone. In both cases, the photocatalytic performance depends strongly on the inclusion of more polar groups, such as dibenzo[b,d]thiophene sulfone backbone units or oligo(ethylene glycol) side-chains. We used optical, spectroscopic, and structural characterisation techniques to understand the different catalytic activities of these systems. We find that although polar groups improve the wettability of the material with water in all cases, backbone and side-chain modifications affect photocatalytic performance in different ways: the inclusion of dibenzo[b,d]thiophene sulfone backbone units improves the thermodynamic driving force for hole transfer to the sacrificial donor, while the inclusion of oligo ethylene glycol side-chains aids the degree of polymer swelling and also extends the electron polaron lifetime. The best performing material, FS-TEG, exhibits a HER of 72.5 μmol h−1 for 25 mg photocatalyst (2.9 mmol g−1 h−1) when dispersed in the presence of a sacrificial donor and illuminated with λ > 420 nm light, corresponding to a hydrogen evolution EQE of 10% at 420 nm. When cast as a thin film, this HER was further boosted to 13.9 mmol g−1 h−1 (3.0 mmol m−2 h−1), which is among the highest rates in this field.

The temperature dependent aggregation behavior of PffBT4T polymers used in organic solar cells plays a critical role in the formation of a favorable morphology in fullerene-based devices. However, there has been little investigation into the impact of donor/acceptor ratio on morphology tuning, especially for non-fullerene acceptors (NFAs). Herein, the influence of composition on morphology is reported for blends of PffBT4T-2DT with two NFAs, O-IDTBR and O-IDFBR. The monotectic phase behavior inferred from differential scanning calorimetry provides qualitative insight into the interplay between solid-liquid and liquid-liquid demixing. Transient absorption spectroscopy suggests that geminate recombination dominates charge decay and that the decay rate is insensitive to composition, corroborated by negligible changes in open-circuit voltage. Exciton lifetimes are also insensitive to composition, which is attributed to the signal being dominated by acceptor excitons which are formed and decay in domains of similar size and purity irrespective of composition. A hierarchical morphology is observed, where the composition dependence of size scales and scattering intensity from resonant soft X-ray scattering (R-SoXS) is dominated by variations in volume fractions of polymer/polymer rich domains. Results suggest an optimal morphology where polymer crystallite size and connectivity are balanced, ensuring a high probability of hole extraction via such domains.