Search

The knowledge of bryophytes growing on metal-contaminated sites is still insufficient in Slovakia. This study deals with bryophyte flora of three mine heaps (Podlipa, Richtárová and Maximilián) with copper-rich substrate. A total of 54 relevés was made, in which a total of 45 bryophyte species (43 mosses and 2 liverworts) was recorded. Species-richest mine heap was Podlipa with 31 bryophyte species (29 mosses and 2 liverworts) and species-poorest was Maximilián with 20 species of mosses. 11 species were mutual for all three mine heaps, while 9 species where present only on Podlipa, 8 on Richtárová and 4 on Maximilián. The most representative bryophytes, in terms of their occurrence and cover, are Ceratodon purpureus, Pohlia cruda, Dicranum scoparium, Hypnum cupressiforme, Pleurozium schreberi, Brachythecium salebrosumand, Plagiomnium affine. Occurence of bryophytes on metal-contaminated sites was discussed.

Syntaxonmical revision of azonal forest vegetation with dominance of Alnus glutinosa and A. incana was done along a latitudinal transect of Slovakia. A data matrix consisting of 240 phytosociological relevés was obtained in accordance with the standard Zürich-Montpellier approach. Detrended correspondence analysis was used to clarify the relationships between the vegetation composition and environmental variables, whereas one-way ANOVA was applied to quantify the differences in site requirements of particular vegetation types. The unsupervised numerical classification resulted in identification of five clusters corresponding to the traditionally described and ecologically interpretable associations within the Euro-Siberian alder carr forests of Alnion glutinosae and the European broad-leaved floodplain forests of Alnion incanae: Carici elongatae-Alnetum glutinosae Schwickerath 1933 (alder carr forests on permanently waterlogged soils), Stellario-Alnetum glutinosae Lohmeyer 1957 (riparian alder vegetation on mesic to humid sites along small brooks), Piceo-Alnetum Mráz 1959 (submontane and montane oligotrophic spruce-alder forests on waterlogged habitats), Cardamino amarae-Alnetum incanae Šomšák 1961 (grey alder vegetation in spring fed areas) and Alnetum incanae Lüdi 1921 (submontane and montane streamside grey alder forests on mesic sites). They significantly (P < 0.05) differed in the Ellenberg's indicator values for nutrients, moisture, temperature and altitude. These environmental variables were also established by DCA analysis as underlying sources of variation in alder-dominated forest composition. Special attention was given to discussion of their syntaxonomy, nomenclature, floristic structure, ecological features and distribution.

Abstract Impacts of sea level rise will last for centuries; therefore, flood risk modeling must transition from identifying risky locations to assessing how populations can best cope. We present the first spatially interactive (i.e., what happens at one location affects another) land change model (FUTURES 3.0) that can probabilistically predict urban growth while simulating human migration and other responses to flooding, essentially depicting the geography of impact and response. Accounting for human migration reduced total amounts of projected developed land exposed to flooding by 2050 by 5%–24%, depending on flood hazard zone (50%–0.2% annual probability). We simulated various “what-if” scenarios and found managed retreat to be the only intervention with predicted exposure below baseline conditions. In the business-as-usual scenario, existing and future development must be either protected or abandoned to cope with future flooding. Our open framework can be applied to different regions and advances local to regional-scale efforts to evaluate potential risks and tradeoffs.

Process-based modelling reveals the predicted spread of the invasive spotted lanternfly to California by 2033 without controlled management.

Learning to use geographic information system (GIS) software effectively may be intimidating due to the extensive range of features it offers. The GRASS GIS software, in particular, presents additional challenges for first-time users in terms of its complex startup procedure and unique terminology associated with its data structure. On the other hand, a substantial part of the GRASS user community including us as developers recognized and embraced the advantages of the current approach. Given the controversial nature of the whole issue, we decided to actively involve regular users by conducting several formal surveys and by performing usability testing. Throughout this process, we discovered that resolving specific software issues through pure user-centered design is not always feasible, particularly in the context of open-source scientific software where the boundary between users and developers is very fuzzy. To address this challenge, we adopted the user-centered methodology tailored to the requirements of open-source scientific software development, which we refer to as community-driven design. This paper describes the community-driven redesigning process on the GRASS GIS case study and sets a foundation for applying community-driven design in other open-source scientific projects by providing insights into effective software development practices driven by the needs and input of the project’s community.

In spite of increasing point density and accuracy, airborne lidar point clouds often exhibit point density variations. Some of these density variations indicate issues with point clouds, potentially leading to errors in derived products. To highlight these issues, we provide an overview of point density variations and show examples in six airborne lidar point cloud datasets that we used in our topographic and geospatial modeling research. Using the published literature, we identified sources of point density variations and issues indicated or caused by these variations. Lastly, we discuss the reduction in point density variations using decimations, homogenizations, and their applicability.

As rapid urbanization occurs in cities worldwide, the importance of maintaining updated digital elevation models (DEM) will continue to increase. However, due to the cost of generating high-resolution DEM over large spatial extents, the temporal resolution of DEMs is coarse in many regions. Low-cost unmanned aerial vehicles (UAS) and DEM data fusion provide a partial solution to improving the temporal resolution of DEM but do not identify which areas of a DEM require updates. We present Rapid-DEM, a framework that identifies and prioritizes locations with a high likelihood of an urban topographic change to target UAS data acquisition and fusion to provide up-to-date DEM. The framework uses PlanetScope 3 m satellite imagery, Google Earth Engine, and OpenStreetMap for land cover classification. GRASS GIS generates a contextualized priority queue from the land cover data and outputs polygons for UAS flight planning. Low-cost UAS fly the identified areas, and WebODM generates a DEM from the UAS survey data. The UAS data is fused with an existing DEM and uploaded to a public data repository. To demonstrate Rapid-DEM a case study in the Walnut Creek Watershed in Wake County, North Carolina is presented. Two land cover classification models were generated using random forests with an overall accuracy of 89% (kappa 0.86) and 91% (kappa 0.88). The priority queue identified 109 priority locations representing 1.5% area of the watershed. Large forest clearings were the highest priority locations, followed by newly constructed buildings. The highest priority site was a 0.5 km2 forest clearing that was mapped with UAS, generating a 15 cm DEM. The UAS DEM was resampled to 3 m resolution and fused with USGS NED 1/9 arc-second DEM data. Surface water flow was simulated over the original and updated DEM to illustrate the impact of the topographic change on flow patterns and highlight the importance of timely DEM updates.

Visual characteristics of urban environments influence human perception and behavior, including choices for living, recreation and modes of transportation. Although geospatial visualizations hold great potential to better inform urban planning and design, computational methods are lacking to realistically measure and model urban and parkland viewscapes at sufficiently fine-scale resolution. In this study, we develop and evaluate an integrative approach to measuring and modeling fine-scale viewscape characteristics of a mixed-use urban environment, a city park. Our viewscape approach improves the integration of geospatial and perception elicitation techniques by combining high-resolution lidar-based digital surface models, visual obstruction, and photorealistic immersive virtual environments (IVEs). We assessed the realism of our viewscape models by comparing metrics of viewscape composition and configuration to human subject evaluations of IVEs across multiple landscape settings. We found strongly significant correlations between viewscape metrics and participants’ perceptions of viewscape openness and naturalness, and moderately strong correlations with landscape complexity. These results suggest that lidar-enhanced viewscape models can adequately represent visual characteristics of fine-scale urban environments. Findings also indicate the existence of relationships between human perception and landscape pattern. Our approach allows urban planners and designers to model and virtually evaluate high-resolution viewscapes of urban parks and natural landscapes with fine-scale details never before demonstrated.

While free and open source software becomes increasingly important in geospatial research and industry, open science perspectives are generally less reflected in universities’ educational programs. We present an example of how free and open source software can be incorporated into geospatial education to promote open and reproducible science. Since 2008 graduate students at North Carolina State University have the opportunity to take a course on geospatial modeling and analysis that is taught with both proprietary and free and open source software. In this course, students perform geospatial tasks simultaneously in the proprietary package ArcGIS and the free and open source package GRASS GIS. By ensuring that students learn to distinguish between geospatial concepts and software specifics, students become more flexible and stronger spatial thinkers when choosing solutions for their independent work in the future. We also discuss ways to continually update and improve our publicly available teaching materials for reuse by teachers, self-learners and other members of the GIS community. Only when free and open source software is fully integrated into geospatial education, we will be able to encourage a culture of openness and, thus, enable greater reproducibility in research and development applications.

Increasing population and rural to urban migration are accelerating urbanization globally, permanently transforming natural systems over large extents. Modelling landscape change over large regions, however, presents particular challenges due to local-scale variations in social and environmental factors that drive land change. We simulated urban development across the South Atlantic States (SAS), a region experiencing rapid population growth and urbanization, using FUTURES—an open source land change model that uses demand for development, local development suitability factors, and a stochastic patch growing algorithm for projecting alternative futures of urban form and landscape change. New advances to the FUTURES modelling framework allow for high resolution projections over large spatial extents by leveraging parallel computing. We simulated the adoption of different urban growth strategies that encourage settlement densification in the SAS as alternatives to the region’s increasing sprawl. Evaluation of projected patterns indicate a 15% increase in urban lands by 2050 given a status quo development scenario compared to a 14.8% increase for the Infill strategy. Status quo development resulted in a 3.72% loss of total forests, 2.97% loss of highly suitable agricultural land, and 3.69% loss of ecologically significant lands. An alternative Infill scenario resulted in similar losses of total forest (3.62%) and ecologically significant lands (3.63%) yet consumed less agricultural lands (1.23% loss). Moreover, infill development patterns differed qualitatively from the status quo and resulted in less fragmentation of the landscape.