Search

Vascular endothelial growth factor A (VEGF-A) has therapeutic cardiovascular effects but delivery challenges have impeded clinical development. We report the first clinical study of naked mRNA encoding VEGF-A (AZD8601) injected into the human heart. EPICCURE (NCT03370887) was a randomized, double-blind study of AZD8601 in patients with left ventricular ejection fraction (LVEF) of 30-50% undergoing elective coronary artery bypass surgery. Thirty epicardial injections of AZD8601 (total 3 mg) or placebo in citrate-buffered saline were targeted to ischemic but viable myocardial regions mapped using quantitative [

Aims The vascular endothelial growth factor (VEGF) family is involved in pathophysiological mechanisms underlying cardiovascular (CV) diseases. The aim of this study was to investigate the associations between circulating VEGF ligands and/or soluble receptors and CV outcome in patients with acute coronary syndrome (ACS) and chronic coronary syndrome (CCS). Methods and results Levels of VEGF biomarkers, including bFGF, Flt-1, KDR (VEGFR2), PlGF, Tie-2, VEGF-A, VEGF-C, and VEGF-D, were measured in the PLATO ACS cohort (n = 2091, discovery cohort). Subsequently, VEGF-D was also measured in the STABILITY CCS cohort (n = 4015, confirmation cohort) to verify associations with CV outcomes. Associations between plasma VEGF-D and outcomes were analysed by multiple Cox regression models with hazard ratios (HR [95% CI]) comparing the upper vs. the lower quartile of VEGF-D. Genome-wide association study (GWAS) of VEGF-D in PLATO identified SNPs that were used as genetic instruments in Mendelian randomization (MR) meta-analyses vs. clinical endpoints. GWAS and MR were performed in patients with ACS from PLATO (n = 10 013) and FRISC-II (n = 2952), and with CCS from the STABILITY trial (n = 10 786). VEGF-D, KDR, Flt-1, and PlGF showed significant association with CV outcomes. VEGF-D was most strongly associated with CV death (P = 3.73e-05, HR 1.892 [1.419, 2.522]). Genome-wide significant associations with VEGF-D levels were identified at the VEGFD locus on chromosome Xp22. MR analyses of the combined top ranked SNPs (GWAS P-values; rs192812042, P = 5.82e-20; rs234500, P = 1.97e-14) demonstrated a significant effect on CV mortality [P = 0.0257, HR 1.81 (1.07, 3.04) per increase of one unit in log VEGF-D]. Conclusion This is the first large-scale cohort study to demonstrate that both VEGF-D plasma levels and VEGFD genetic variants are independently associated with CV outcomes in patients with ACS and CCS. Measurements of VEGF-D levels and/or VEGFD genetic variants may provide incremental prognostic information in patients with ACS and CCS.

Chemically modified mRNA is an efficient, biocompatible modality for therapeutic protein expression. We report a first-time-in-human study of this modality, aiming to evaluate safety and potential therapeutic effects. Men with type 2 diabetes mellitus (T2DM) received intradermal injections of modified mRNA encoding vascular endothelial growth factor A (VEGF-A) or buffered saline placebo (ethical obligations precluded use of a non-translatable mRNA control) at randomized sites on the forearm. The only causally treatment-related adverse events were mild injection-site reactions. Skin microdialysis revealed elevated VEGF-A protein levels at mRNA-treated sites versus placebo-treated sites from about 4–24 hours post-administration. Enhancements in basal skin blood flow at 4 hours and 7 days post-administration were detected using laser Doppler fluximetry and imaging. Intradermal VEGF-A mRNA was well tolerated and led to local functional VEGF-A protein expression and transient skin blood flow enhancement in men with T2DM. VEGF-A mRNA may have therapeutic potential for regenerative angiogenesis., Chemically modified mRNA is a new approach for therapeutic protein expression that could be applied to angiogenesis. Here the authors show in a phase 1 clinical trial that a modified mRNA encoding VEGF-A is well tolerated in patients with type 2 diabetes.

RNA-based therapies have great potential to treat many undruggable human diseases. However, their efficacy, in particular for mRNA, remains hampered by poor cellular delivery and limited endosomal escape. Development and optimisation of delivery vectors, such as lipid nanoparticles (LNPs), are impeded by limited screening methods to probe the intracellular processing of LNPs in sufficient detail. We have developed a high-throughput imaging-based endosomal escape assay utilising a Galectin-9 reporter and fluorescently labelled mRNA to probe correlations between nanoparticle-mediated uptake, endosomal escape frequency, and mRNA translation. Furthermore, this assay has been integrated within a screening platform for optimisation of lipid nanoparticle formulations. We show that Galectin-9 recruitment is a robust, quantitative reporter of endosomal escape events induced by different mRNA delivery nanoparticles and small molecules. We identify nanoparticles with superior escape properties and demonstrate cell line variances in endosomal escape response, highlighting the need for fine-tuning of delivery formulations for specific applications., Munson et al. develop a high-throughput Galectin-9 reporter based endosomal escape imaging assay to probe correlations between nanoparticle-mediated uptake, endosomal escape frequency, and mRNA translation. By screening various delivery systems, modulators and combinations of nanoparticle components, the authors demonstrate how nanomedicines can be optimized for superior escape properties and efficacy in specific applications.

RNA-based therapies have great potential to treat many undruggable human diseases. However, their efficacy, in particular for mRNA, remains hampered by poor cellular delivery and limited endosomal escape. Advances in the development and rational optimisation of delivery vectors, such as lipid nanoparticles (LNPs), are impeded by the limited availability of screening methods that probe the intracellular processing of LNPs in sufficient detail. We have developed a high-throughput imaging-based endosomal escape assay utilising a Galectin-9 reporter and fluorescently labelled mRNA to probe correlations between nanoparticle-mediated uptake, endosomal escape frequency, and mRNA translation. This assay has, furthermore, been integrated with a screening platform for nanoparticle formulation to optimise LNPs. We show that Galectin-9 recruitment is a robust, quantitative reporter of endosomal escape events induced by different mRNA delivery nanoparticles and small molecules. We also identify nanoparticles with superior escape properties and demonstrate significant cell line variances in endosomal escape response, highlighting the need for fine-tuning of delivery formulations for specific applications.

Development of physiologically relevant cellular models with strong translatability to human pathophysiology is critical for identification and validation of novel therapeutic targets. Herein we describe a detailed protocol for generation of an advanced 3-dimensional kidney cellular model using induced pluripotent stem cells, where differentiation and maturation of kidney progenitors and podocytes can be monitored in live cells due to CRISPR/Cas9-mediated fluorescent tagging of kidney lineage markers (SIX2 and NPHS1). Utilizing these cell lines, we have refined the previously published procedures to generate a new, higher throughput protocol suitable for drug discovery. Using paraffin-embedded sectioning and whole-mount immunostaining, we demonstrated that organoids grown in suspension culture express key markers of kidney biology (WT1, ECAD, LTL, nephrin) and vasculature (CD31) within renal cortical structures with microvilli, tight junctions and podocyte foot processes visualized by electron microscopy. Additionally, the organoids resemble the adult kidney transcriptomics profile, thereby strengthening the translatability of our in vitro model. Thus, development of human nephron-like structures in vitro fills a major gap in our ability to assess the effect of potential treatment on key kidney structures, opening up a wide range of possibilities to improve clinical translation.

The effect of induction of protein production was studied in bioreactor cultures of T. reesei strain Rut-C30 and its transformant expressing endoglucanase I core domain (EGI, Cel7B) fused with a hydrophobic peptide tag. The tag was previously designed for efficient purification of the fusion protein in aqueous two-phase separation. The fungi were first grown on glucose-containing minimal medium after which rich medium with lactose as a carbon source was added to induce cellulase production. Production of extracellular protein and cellulase activity and the transcript levels of the major cellulase genes were analyzed during the cultivations. Induction of the cellulase genes followed a similar temporal pattern in both strains. The first phase of induction took place after addition of lactose as soon as glucose was depleted, and the second phase after lactose was consumed. Western analysis showed that a decreased amount of fusion protein was produced in the culture medium compared with the endogenous EGI, although the strain harbors several copies of the recombinant gene under the strong cbh1 promoter. The fusion protein appeared to accumulate within the cells, indicating impaired secretion of the protein. The mRNA levels of the UPR (unfolded protein response) target genes, bip1 and pdi1, and the level of the active form of hac1 transcript encoding the UPR transcription factor increased concurrently with induction of the cellulase genes in both strains, indicating increased requirement of the folding machinery under these conditions. However, only a minor increase in bip1 and pdi1 transcript level was observed in the transformant compared with the parental strain.

The catalytic module of Hypocrea jecorina (previously Trichoderma reesei) Cel7B was homologously expressed by transformation of strain QM9414. Post-translational modifications in purified Cel7B preparations were analysed by enzymatic digestions, high performance chromatography, mass spectrometry and site-directed mutagenesis. Of the five potential sites found in the wild-type enzyme, only Asn56 and Asn182 were found to be N-glycosylated. GlcNAc(2)Man(5) was identified as the predominant N-glycan, although lesser amounts of GlcNAc(2)Man(7) and glycans carrying a mannophosphodiester bond were also detected. Repartition of neutral and charged glycan structures over the two glycosylation sites mainly accounts for the observed microheterogeneity of the protein. However, partial deamidation of Asn259 and a partially occupied O-glycosylation site give rise to further complexity in enzyme preparations.

Endo-beta-1,4-D-mannanases (beta-mannanase; EC 3.2.1.78) are endohydrolases that participate in the degradation of hemicellulose, which is closely associated with cellulose in plant cell walls. The beta-mannanase from Trichoderma reesei (Man5A) is composed of an N-terminal catalytic module and a C-terminal carbohydrate-binding module (CBM). In order to study the properties of the CBM, a construct encoding a mutant of Man5A lacking the part encoding the CBM (Man5ADeltaCBM), was expressed in T. reesei under the regulation of the Aspergillus nidulans gpdA promoter. The wild-type enzyme was expressed in the same way and both proteins were purified to electrophoretic homogeneity using ion-exchange chromatography. Both enzymes hydrolysed mannopentaose, soluble locust bean gum galactomannan and insoluble ivory nut mannan with similar rates. With a mannan/cellulose complex, however, the deletion mutant lacking the CBM showed a significant decrease in hydrolysis. Binding experiments using activity detection of Man5A and Man5ADeltaCBM suggests that the CBM binds to cellulose but not to mannan. Moreover, the binding of Man5A to cellulose was compared with that of an endoglucanase (Cel7B) from T. reesei.

Here we present data to demonstrate how partitioning of a hydrophilic enzyme can be directed to the hydrophobic detergent-enriched phase of an aqueous two-phase system by addition of short stretches of amino acid residues to the protein molecule. The target enzyme was the industrially important endoglucanase I, EGI (endo-1,4-beta-D-glucan-4-glucanohydrolase, EC 3.2.1.4, Cel7B) of Trichoderma reesei. We investigated the partitioning of three EGI variants containing various C-terminal peptide extensions including Trp-Pro motifs of different lengths and localizations. Additionally, a recently developed system composed of the thermoseparating copolymer HM-EOPO was utilized to study the effects of fusion tags. The addition of peptides containing tryptohan residues enhanced the partitioning of EGI to the HM-EOPO-rich phase. The system composed of a nonionic detergent (Agrimul NRE1205) resulted in the highest partition coefficient (K = 31) and yield (90%) with the construct EGI(core-P5)(WP)(4) containing (Trp-Pro)(4) after a short linker stretch. A recombinant strain of T. reesei Rut-C30 for large-scale production was constructed in which the fusion protein EGI(core-P5)(WP)(4) was expressed from the strong promoter of the cellulase gene cbh1. The fusion protein was successfully expressed and secreted from the fungus during shake-flask cultivations. Cultivation in a 28-L bioreactor however, revealed that the fusion protein is sensitive to proteases. Consequently, only low production levels were obtained in large-scale production trials.

Endoglucanases (EGI) (endo-1,4-β-D-glucan-4-glucanohydrolase, EC 3.2.1.4, Cel7B) of Trichoderma reesei are industrially important enzymes. Thus, there is a great need for development of a primary recovery method suitable for large-scale utilization. In this study we present a concept applicable for large-scale purification of an EGI fusion protein by one-step extraction in a poly(ethylene glycol) PEG-sodium/potassium phosphate aqueous two-phase system. EGI is a two-module enzyme composed of an N-terminal catalytic module and a C-terminal cellulose binding module (CBM) separated by a glycosylated linker region. Partitioning of six different EGI constructs, containing the C-terminal extensions (WP) 2, (WP) 4 or the amphiphilic protein hydrophobin I (HFB) of T. reesei instead of the CBM were studied to evaluate if any of the fusions could improve the partition coefficient sufficiently to be suitable for large-scale production. All constructs showed improved partitioning in comparison to full length EGI. The (WP) 4 extensions resulted in 26- to 60-fold improvement of partition coefficient. Consequently, a relative minor change in amino acid sequence on the two-module protein EGI improved the partition coefficient significantly in the PEG 4000-sodium/potassium phosphate system. The addition of HFBI to EGI clearly enhanced the partition coefficient (K = 1.2) in comparison to full-length EGI (K = 0.035). Partitioning of the construct with (WP) 4 fused to the catalytic module and a short sequence of the linker [EGI core-P5(WP) 4] resulted in the highest partition coefficient (K = 54) and a yield of 98% in the PEG phase. Gel electrophoresis showed that the construct with the (WP) 4 tag attached after a penta-proline linker could be purified from the other bulk proteins by only a single-step separation in the PEG 4000-sodium/potassium phosphate system. This is a major improvement in comparison with the previously studied model (ethylene oxide-propylene oxide)-dextran system. Hence, this construct will be suitable for further optimization of the extraction of the enzyme in a PEG 4000-sodium/potassium phosphate system from culture filtrate.

Genetic engineering has been used for fusion of the peptide tag, Trp-Pro-Trp-Pro, on a protein to study the effect on partitioning in aqueous two-phase systems. As target protein for the fusions the cellulase, endoglucanase I (endo-1,4-β-d-glucan-4-glucanohydrolase, EC 3.2.1.4, EGI, Cel7B) of Trichoderma reesei was used. For the first time a glycosylated two-domain enzyme has been utilized for addition of peptide tags to change partitioning in aqueous two-phase systems. The aim was to find an optimal fusion localization for EGI. The peptide was (1) attached to the C-terminus end of the cellulose binding domain (CBD), (2) inserted in the glycosylated linker region, (3) added after a truncated form of EGI lacking the CBD and a small part of the linker. The different constructs were expressed in the filamentous fungus T. reesei under the gpdA promoter from Aspergillus nidulans. The expression levels were between 60 and 100 mg/l. The partitioning behavior of the fusion proteins was studied in an aqueous two-phase model system composed of the thermoseparating ethylene oxide (EO)-propylene oxide (PO) random copolymer EO-PO (50:50) (EO50PO50) and dextran. The Trp-Pro-Trp-Pro tag was found to direct the fusion protein to the top EO50PO50 phase. The partition coefficient of a fusion protein can be predicted with an empirical correlation based on independent contributions from partitioning of unmodified protein and peptide tag in this model system. The fusion position at the end of the CBD, with the spacer Pro-Gly, was shown to be optimal with respect to partitioning and tag efficiency factor (TEF) was 0.87, where a fully exposed tag would have a TEF of 1.0. Hence, this position can further be utilized for fusion with longer tags. For the other constructs the TEF was only 0.43 and 0.10, for the tag fused to the truncated EGI and in the linker region of the full length EGI, respectively. (Less)

The parameters important for an optimisation of cloud point extraction in technical scale were investigated using a genetically engineered fusion protein derived from endoglucanase I expressed in Trichoderma reesei and the nonionic polyoxyethylene Agrimul NRE 1205. The key parameters are temperature, detergent concentration, and additional salts. These parameters are interdependent, thus there is an optimum in the partition coefficient with respect to detergent concentration and a maximum for the partition coefficient and the yield with respect to temperature. These results were confirmed for the detergent C12E5 to demonstrate that these optima are due to the nature of polyoxyethylenes. Cloud point extraction was found to be only slightly affected by pH. In the case studied extraction of whole broth is favourable for a high yield and partition coefficient, since fusion protein adhering to the cells can be solubilized. However some loss of detergent which remains in the fungal biomass was observed.

The effect of induction of protein production was studied in bioreactor cultures of T. reesei strain Rut-C30 and its transformant expressing endoglucanase I core domain (EGI, Cel7B) fused with a hydrophobic peptide tag. The tag was previously designed for efficient purification of the fusion protein in aqueous two-phase separation. The fungi were first grown on glucose-containing minimal medium after which rich medium with lactose as a carbon source was added to induce cellulase production. Production of extracellular protein and cellulase activity and the transcript levels of the major cellulase genes were analyzed during the cultivations. Induction of the cellulase genes followed a similar temporal pattern in both strains. The first phase of induction took place after addition of lactose as soon as glucose was depleted, and the second phase after lactose was consumed. Western analysis showed that a decreased amount of fusion protein was produced in the culture medium compared with the endogenous EGI, although the strain harbors several copies of the recombinant gene under the strong cbh1 promoter. The fusion protein appeared to accumulate within the cells, indicating impaired secretion of the protein. The mRNA levels of the UPR (unfolded protein response) target genes, bip1 and pdi1, and the level of the active form of hac1 transcript encoding the UPR transcription factor increased concurrently with induction of the cellulase genes in both strains, indicating increased requirement of the folding machinery under these conditions. However, only a minor increase in bip1 and pdi1 transcript level was observed in the transformant compared with the parental strain.

The human melanocortin 4 receptor (MC4r) was successfully expressed in Sf9 cells using the baculovirus infection system. N- and C-terminally His-tagged receptors generated B-max values of 14 and 23 pmol receptor/mg membrane protein, respectively. The highest expression level obtained with the C-terminally His-tagged MC4r corresponded to 0.25 mg active receptor/litre culture volume. Addition of a viral signal peptide at the N-terminus of the His-tagged MC4r did not improve the expression level. Confocal laser microscopy studies revealed that both the N- and C-terminally tagged MC4r did not accumulate intracellularly and were mainly located in the plasma membrane. The recombinant receptors showed similar affinity for the agonist NDP-MSH (K-d = 11 nM) as to MC4r expressed in mammalian cells. Functional coupling of the highest expressed C-terminal tagged receptor to endogenous Galpha protein was demonstrated through 6TPgammaS binding upon agonist stimulation of the receptor. K-i values for the ligands MTII, HS014, alpha-, beta-, and gamma-MSH are comparable to the values obtained for MC4r expressed in mammalian cells. (C) 2004 Elsevier Inc. All rights reserved. (Less)

The feasibility and scalability of extraction in detergent-based aqueous two-phase systems for the separation of proteins from culture broth is demonstrated. At the same time the large-scale production of a fusion protein and the influence of cultivation scale on the efficiency of separation were investigated. An amphiphilic fusion protein EGIcore-HFBI was chosen, consisting of the catalytic core of the cellulase endoglucanase I and the small protein hydrophobin I, expressed homologously in Trichoderma reesei. Using the technical nonionic detergent Agrimul NRE 1205 the separation was successfully scaled up to 1200 l. No differences in yield or in partition coefficient were observed at 10 ml and 1200 l scale. Changes in the fermentation temperature and scale, however, can influence the properties of the protein and thus alter partition coefficient and yield. The decreased separation efficiency appears to be correlated with changes in glycosylation at lower cultivation temperatures.

The catalytic module of Hypocrea jecorina (previously Trichoderma reesei) Cel7B was homologously expressed by transformation of strain QM9414. Post-translational modifications in purified Cel7B preparations were analysed by enzymatic digestions, high performance chromatography, mass spectrometry and site-directed mutagenesis. Of the five potential sites found in the wild-type enzyme, only Asn56 and Asn182 were found to be N-glycosylated. GlcNAc(2)Man(5) was identified as the predominant N-glycan, although lesser amounts of GlcNAc(2)Man(7) and glycans carrying a mannophosphodiester bond were also detected. Repartition of neutral and charged glycan structures over the two glycosylation sites mainly accounts for the observed microheterogeneity of the protein. However, partial deamidation of Asn259 and a partially occupied O-glycosylation site give rise to further complexity in enzyme preparations.

Here we present data to demonstrate how partitioning of a hydrophilic enzyme can be directed to the hydrophobic detergent-enriched phase of an aqueous two-phase system by addition of short stretches of amino acid residues to the protein molecule. The target enzyme was the industrially important endoglucanase I, EGI (endo-1,4-beta-D-glucan-4-glucanohydrolase, EC 3.2.1.4, Cel7B) of Trichoderma reesei. We investigated the partitioning of three EGI variants containing various C-terminal peptide extensions including Trp-Pro motifs of different lengths and localizations. Additionally, a recently developed system composed of the thermoseparating copolymer HM-EOPO was utilized to study the effects of fusion tags. The addition of peptides containing tryptohan residues enhanced the partitioning of EGI to the HM-EOPO-rich phase. The system composed of a nonionic detergent (Agrimul NRE1205) resulted in the highest partition coefficient (K = 31) and yield (90%) with the construct EGI(core-P5)(WP)(4) containing (Trp-Pro)(4) after a short linker stretch. A recombinant strain of T. reesei Rut-C30 for large-scale production was constructed in which the fusion protein EGI(core-P5)(WP)(4) was expressed from the strong promoter of the cellulase gene cbh1. The fusion protein was successfully expressed and secreted from the fungus during shake-flask cultivations. Cultivation in a 28-L bioreactor however, revealed that the fusion protein is sensitive to proteases. Consequently, only low production levels were obtained in large-scale production trials.

Extraction systems for hydrophobically tagged proteins have been developed based on phase separation in aqueous solutions of non-ionic detergents and polymers. The systems have earlier only been applied for separation of membrane proteins. Here, we examine the partitioning and purification of the amphiphilic fusion protein endoglucanase I(core)-hydrophobin I (EGI(core)-HFBI) from culture filtrate originating from a Trichoderma reesei fermentation. The micelle extraction system was formed by mixing the non-ionic detergent Triton X-114 or Triton X-100 with the hydroxypropyl starch polymer, Reppal PES100. The detergent/polymer aqueous two-phase systems resulted in both better separation characteristics and increased robustness compared to cloud point extraction in a Triton X-114/water system. Separation and robustness were characterized for the parameters: temperature, protein and salt additions. In the Triton X-114/Reppal PES100 detergent/polymer system EGI(core)-HFBI strongly partitioned into the micelle-rich phase with a partition coefficient (K) of 15 and was separated from hydrophilic proteins, which preferably partitioned to the polymer phase. After the primary recovery step, EGI(core)-HFBI was quantitatively back-extracted (K(EGIcore-HFBI)=150, yield=99%) into a water phase. In this second step, ethylene oxide-propylene oxide (EOPO) copolymers were added to the micelle-rich phase and temperature-induced phase separation at 55 degrees C was performed. Total recovery of EGI(core)-HFBI after the two separation steps was 90% with a volume reduction of six times. For thermolabile proteins, the back-extraction temperature could be decreased to room temperature by using a hydrophobically modified EOPO copolymer, with slightly lower yield. The addition of thermoseparating co-polymer is a novel approach to remove detergent and effectively releases the fusion protein EGI(core)-HFBI into a water phase.

Endoglucanases (endo-1,4-beta-D-glucan-4-glucanohydrolase, EC 3.2.1.4) are industrially important enzymes. In this study endoglucanase I (EGI or Cel7B) of the filamentous fungi Trichoderma reesei has been genetically engineered to investigate the influence of tryptophan rich peptide extensions (tags) on partitioning in an aqueous two-phase model system. EGI is a two-domain enzyme and is composed of a N-terminal catalytic domain and a C-terminal cellulose binding domain, separated by a linker. The aim was to find an optimal tag and fusion position, which further could be utilised for large scale extractions. Peptide tags of different length and composition were attached at various localisations of EGI. The fusion proteins were expressed from T. reesei with the use of the gpdA promoter from Aspergillus nidulans. Variations in secreted levels between the engineered proteins were obtained. The partitioning of EGI in an aqueous two-phase system composed of a thermoseparating ethylene oxide-propylene oxide random copolymer (EO(50)PO(50)) and dextran, could be significantly improved by relatively minor genetic engineering. The (Trp-Pro)(4) tag added after a short stretch of the linker, containing five proline residues, gave in the highest partition coefficient of 12.8. The yield in the top phase was 94%. The specific activity was 83% of the specific activity of unmodified EGI on soluble substrate. The efficiency of a tag fused to a protein is shown by the tag efficiency factor (TEF). A hypothetical TEF of 1.0 would indicate full tag exposure and optimal contribution to the protein partitioning by the fused tag. The location of the fusion point after the sequence of five proline residues in the linker of EGI is the most beneficial in two-phase separation. The highest TEF (0.97) was obtained with the (Trp-Pro)(2) tag at this position, indicating full exposure and intactness of the tag. However, the peptide tag composed of (Trp-Pro)(4) improved the partition properties the most but had lower TEF in comparison to (Trp-Pro)(2).

The effect of induction of protein production was studied in bioreactor cultures of the T. reesei strain Rut-C30 and its transformant expressing endoglucanase I (EGI, Cel7B) fused with a hydrophobic tag. The peptide tag was previously designed for efficient purification of the fusion protein in aqueous two-phase separation. The first phase of the bioreactor cultivations was carried out on glucose containing minimal medium. At the stage when glucose was nearly depleted, the medium was supplemented with rich medium containing lactose as a carbon source to induce production of cellulases. The transformant produced somewhat less secreted protein and cellobiohydrolase I (CBHI, Cel7A) activity than the parental strain. Western analysis of intracellular proteins showed that the fusion protein EGIcore-P5(WP)4 accumulated inside the cell, indicating impaired secretion of the protein. Two-dimensional gel analysis suggested that the fusion protein was possibly trapped early in the secretory pathway. The mRNA levels of the UPR (unfolded protein response) target genes, bip1 and pdil, and the level of the activated hac1 transcript encoding the UPR transcription factor, increased at the same time with an increase in the transcript levels of cellulase genes, suggesting UPR activation in response to cellulase induction. However, only a minor increase in pdi1 and bip1 transcript level was observed in the transformant expressing the fusion protein compared to its parental strain. In addition, slightly lower CBHI production and cbhl mRNA levels were measured in the transformant as compared to the parental strain, indicating activation of the novel repression mechanism of genes encoding secreted proteins in response to secretion stress, RESS (repression under secretion stress).