Search

BACKGROUND AND AIMS Patients on haemodialysis (HD) are expected to have excess mortality in coronavirus disease 2019 (COVID-19). This was challenged by a recent study reporting HD patients to have comparable mortality and decreased ICU admissions when hospitalized with COVID-19. It was speculated that an altered immune system due to chronic inflammation might protect HD patients from severe COVID-19. Therefore, we designed a study to describe the peripheral blood immune phenotype in HD patients and respective controls with COVID-19. METHOD Sixty-four patients (31 HD, 33 non-HD) with PCR-confirmed severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection and 16 control patients (10 HD, 6 non-HD) were prospectively included. According to symptoms, COVID-19 patients were categorized as asymptomatic/mild and moderate/severe COVID-19 phenotypes. Cytokine profiling and immune phenotyping were performed. RESULTS Th1 and Th17 plasma cytokine levels were highly increased in HD patients without SARS-CoV-2 infection and were not significantly regulated during COVID-19. In non-HD COVID-19 patients, these cytokines increased significantly with disease severity. While all patients with moderate/severe COVID-19 showed hallmarks of COVID-19 such as decreased CD3+ CD4+ and CD8+ and CD4+CD25hiFoxP3+ regulatory T cells, significantly increased CD38+CD8+ effector memory and CD38+CD8+ TEMRA T cells were detected in HD compared to non-HD patients with moderate/severe COVID-19. Furthermore, CD161+CD8+ T cells decreased significantly in non-HD COVID-19 patients dependent on disease severity, but not in HD patients. Dynamics of B cells and subtypes were comparable in HD and non-HD COVID-19 patients. Significantly fewer moderate/severe COVID-19 HD patients needed ICU treatment [1/13 (7.7%) HD, 12/24 (50%) non-HD], whereas no difference in mortality was observed [4/31 (12.9%) HD, 6/33 non-HD (18.2%)]. CONCLUSION HD patients might be protected from severe COVID-19 due to their chronic inflammatory state with increased CD38+CD8+ effector memory and TEMRA T cells as well as CD161+CD8+ T cells.

Eicosanoids are lipid-mediator molecules with key roles in inflammatory skin diseases, such as psoriasis. Eicosanoids are released close to the source of inflammation, where they elicit local pleiotropic effects and dysregulations. Monitoring inflammatory mediators directly in skin lesions could provide new insights and therapeutic possibilities. Here, we analyzed dermal interstitial fluid samples obtained by dermal open-flow microperfusion in a rat model of skin inflammation. We developed a solid-phase extraction ultra-HPLC/MS/MS method to reliably and precisely analyze small-volume samples and quantified 11 eicosanoids [thromboxane B(2), prostaglandin (PG) E(2), PGD(2), PGF(2α), leukotriene B(4), 15-HETE, 12-HETE, 5-HETE, 12-hydroxyeicosapentaenoic acid, 13-HODE, and 17-hydroxydocosahexaenoic acid]. Our method achieved a median intraday precision of approximately 5% and interday precision of approximately 8%. All calibration curves showed excellent linearity between 0.01 and 50 ng/ml (R(2) > 0.980). In the rat model, eicosanoids were significantly increased in imiquimod-treated inflamed skin sites compared with untreated control sites. Oral treatment with an anti-inflammatory glucocorticoid decreased eicosanoid concentrations. These results show that a combination of tissue-specific sampling with LC/MS analytics is well suited for analyzing small sample volumes from minimally invasive sampling methods such as open-flow microperfusion or microdialysis to study local inflammation and the effect of treatments in skin diseases.

Burn injuries initiate numerous processes such as heat shock response, inflammation and tissue regeneration. Reliable burn models are needed to elucidate the exact sequence of local events to be able to better predict when local inflammation triggers systemic inflammatory processes. In contrast to other ex vivo skin culture approaches, we used fresh abdominal skin explants to introduce contact burn injuries. Histological and ultrastructural analyses confirmed a partial-thickness burn pathology. Gene expression patterns and cytokine production profiles of key mediators of the local inflammation, heat shock response, and tissue regeneration were analyzed for 24 h after burn injury. We found significantly increased expression of factors involved in tissue regeneration and inflammation soon after burn injury. To investigate purely inflammation-mediated reactions we injected lipopolysaccharide into the dermis. In comparison to burn injury, lipopolysaccharide injection initiated an inflammatory response while expression patterns of heat shock and tissue regeneration genes were unaffected for the duration of the experiment. This novel ex vivo human skin model is suitable to study the local, early responses to skin injuries such as burns while maintaining an intact overall tissue structure and it gives valuable insights into local mechanisms at the very beginning of the wound healing process after burn injuries.

BACKGROUND & AIMS Excessive fructose intake is associated with increased de novo lipogenesis, blood triglycerides, and hepatic insulin resistance. We aimed to determine whether fructose elicits specific effects on lipid metabolism independently of excessive caloric intake. METHODS A total of 94 healthy men were studied in this double-blind, randomized trial. They were assigned to daily consumption of sugar-sweetened beverages (SSBs) containing moderate amounts of fructose, sucrose (fructose-glucose disaccharide) or glucose (80��g/day) in addition to their usual diet or SSB abstinence (control group) for 7 weeks. De novo fatty acid (FA) and triglyceride synthesis, lipolysis and plasma free FA (FFA) oxidation were assessed by tracer methodology. RESULTS Daily intake of beverages sweetened with free fructose and fructose combined with glucose (sucrose) led to a 2-fold increase in basal hepatic fractional secretion rates (FSR) compared to control (median FSR %/day: sucrose 20.8 (p��= 0.0015); fructose 19.7 (p��= 0.013); control 9.1). Conversely, the same amounts of glucose did not change FSR (median of FSR %/day 11.0 (n.s.)). Fructose intake did not change basal secretion of newly synthesized VLDL-triglyceride, nor did it alter rates of peripheral lipolysis, nor total FA and plasma FFA oxidation. Total energy intake was similar across groups. CONCLUSIONS Regular consumption of both fructose- and sucrose-sweetened beverages in moderate doses - associated with stable caloric intake - increases hepatic FA synthesis even in a basal state; this effect is not observed after glucose consumption. These findings provide evidence of an adaptative response to regular fructose exposure in the liver. LAY SUMMARY This study investigated the metabolic effects of daily sugar-sweetened beverage consumption for several weeks in healthy lean men. It revealed that beverages sweetened with the sugars fructose and sucrose (glucose and fructose combined), but not glucose, increase the ability of the liver to produce lipids. This change may pave the way for further unfavorable effects on metabolic health. CLINICAL TRIAL REGISTRATION NUMBER NCT01733563.

Objectives: To evaluate the effect of SGLT2i on the development of DKA during insulin depletion in T1DM. Methods: Sixteen male, C-peptide negative T1DM subjects were enrolled in this open, randomized, crossover, bicentric trial with two 7-day treatment periods (with/without SGLT2i). At the end of each treatment period, insulin was withdrawn for a maximum of 12h, followed by recovery phase (12h). Results: SGLT2i led to significantly lower plasma glucose (PG) values during insulin depletion (PGmax with/without SGLT2i: 174±40 (mean±SD) vs. 302±48 mg/dL; 95% CI for ratio: 0.51-0.60), but to higher beta-hydroxybutyrate (BHB) values (Figure) and a steeper BHB increase (delta BHB: 8.1±2.0 vs. 6.0±1.7 µmol/L/min; 95% CI for ratio: 1.22-1.49). pH, bicarbonate and base excess during insulin depletion were comparable. Baseline glucagon (7.8±2.5 vs. 5.0±1.6 pmol/L; 95% CI for ratio: 1.26-1.95) and FFA levels (0.65±0.27 vs. 0.43±0.31 mmol/L; 95% CI for ratio: 1.08-2.28) were higher with SGLT2i, but data indicate that after increase during insulin depletion comparable concentrations were reached for both. Conclusions: SGLT2i keeps PG in near normal ranges during DKA development and recovery, potentially impeding DKA diagnosis. While SGLT2i leads to higher ketone levels, increased baseline glucagon and FFA, an effect on pH and acidosis was not demonstrated. Disclosure I. Mursic: None. E. Svehlikova: None. W. Regittnig: None. T. Augustin: None. C. Magnes: None. A. Eberl: None. T. Heise: Advisory Panel; Self; Mylan, Novo Nordisk A/S. Research Support; Self; ADOCIA, Aerami, Becton, Dickinson and Company, Biocon, Boehringer Ingelheim International GmbH, Eli Lilly and Company, Gan & Lee Pharmaceuticals, MedImmune, Merck KGaA, Mylan, Nordic Bioscience, Novo Nordisk A/S, Poxel SA, Sanofi, Xeris Pharmaceuticals, Inc., Zealand Pharma A/S. Speaker’s Bureau; Self; Eli Lilly and Company, Novo Nordisk A/S. O. Klein: None. M. Wolf: None. M. Urschitz: None. M. Brunner: None. H. Sourij: Advisory Panel; Self; Amgen, AstraZeneca, Boehringer Ingelheim International GmbH, Merck Sharp & Dohme Corp., Novo Nordisk A/S, Sanofi. Research Support; Self; Boehringer Ingelheim International GmbH, Merck Sharp & Dohme Corp., Novo Nordisk A/S, Sanofi. Speaker’s Bureau; Self; Boehringer Ingelheim International GmbH, Novo Nordisk A/S, Sanofi. T. Pieber: Advisory Panel; Self; ADOCIA, Arecor, AstraZeneca, Eli Lilly and Company, Novo Nordisk A/S, Sanofi. Research Support; Self; AstraZeneca, Novo Nordisk A/S. Speaker’s Bureau; Self; Novo Nordisk A/S, Roche Diagnostics K.K.

(2)H2O as nonradioactive, stable marker substance is commonly used in preclinical and clinical studies and the precise determination of (2)H2O concentration in biological samples is crucial. However, aside from isotope ratio mass spectrometry (IRMS), only a very limited number of methods to accurately measure the (2)H2O concentration in biological samples are routinely established until now. In this study, we present a straightforward method to accurately measure (2)H-enrichment of rat brain interstitial fluid (ISF) and rat plasma to determine the relative recovery of a cerebral open flow microperfusion (cOFM) probe, using headspace-gas-chromatography - quadrupole-mass-spectrometry. This method is based on basic-catalyzed hydrogen/deuterium exchange in acetone and detects the (2)H-labelled acetone directly by the headspace GC-MS. Small sample volumes and limited number of preparation steps make this method highly competitive. It has been fully validated. (2)H enriched to 8800 ppm in plasma showed an accuracy of 98.9% and %Relative Standard Deviation (RSD) of 3.1 with n = 18 over three days and with two operators. Similar performance was obtained for cerebral ISF enriched to 1100 ppm (accuracy: 96.5%, %RSD: 3.1). With this highly reproducible method we demonstrated the successful employment of (2)H2O as performance marker for a cOFM probe.

Background Assessment of drug concentration in the brain interstitial fluid (ISF) is crucial for development of brain active drugs, which are mainly small, lipophilic substances able to cross the blood-brain barrier (BBB). We aimed to compare the applicability of cerebral Open Flow Microperfusion (cOFM) and Microdialysis (MD) to sample the lipophilic substance amitriptyline (AMI), its metabolites Hydroxyamitriptyline (HYA), Nortriptyline (NOR), Amitriptyline-N-Oxide (ANO), deuterated water (D2O) and the hydrophilic substance sodium fluorescein (Naf) in brain ISF. New method cOFM has been refined to yield increased spatial resolution and performance. Comparison of cOFM and MD and results Performance of cOFM and MD was assessed by in vivo AUC ratios of probe samples (AUCCOFM/AUCMD) and the in vivo relative recovery of D2O (RRvv,D2O). Adsorption of AMI and Naf to MD and cOFM was assessed by the in vitro relative recovery (RRvt) prior to the in vivo experiments. The in vivo AUC ratio of AMI and RRvv,D2O was about two times higher for cOFM than for MD (AUCOFM/AUCMD = 2.0, RRvv,D2O(cOFM)/RRvv,D2O(MD) = 2.1). cOFM detected all investigated AMI metabolites except NOR. MD did not detect HYA, NOR, ANO and Naf. In vitro adsorption of AMI and Naf to the MD membrane was strong (RRvt,AMI = 4.4%, RRvt,Naf = 1.5%) but unspecific adsorption to cOFM was negligibly small (RRvt,AMI = 98% and RRvt,Naf = 98%). Conclusions cOFM showed better performance when sampling AMI and its metabolites, Naf and D2O, and had an about two times higher RRvv,D2O than MD. MD did not detect HYA, NOR, ANO and Naf, most likely due to membrane adsorption.

A method for a highly selective and sensitive identification and quantitation of lysophosphatidic acid (LPA) and phosphatidic acid (PA) molecular species was developed using hydrophilic interaction liquid chromatography (HILIC) followed by negative-ion electrospray ionization high resolution mass spectrometry. Different extraction methods for the polar LPA and PA species were compared and a modified Bligh & Dyer extraction by addition of 0.1 M hydrochloric acid resulted in a ≈1.2-fold increase of recovery for the 7 PA and a more than 15-fold increase for the 6 LPA molecular species of a commercially available natural mix compared to conventional Bligh & Dyer extraction. This modified Bligh & Dyer extraction did not show any artifacts resulting from hydrolysis of natural abundant phospholipids. The developed HILIC method is able to separate all PA and LPA species from major polar membrane lipid classes which might have suppressive effects on the minor abundant lipid classes of interest. The elemental compositions of intact lipid species are provided by the high mass resolution of 100,000 and high mass accuracy below 3 ppm of the Orbitrap instrument. Additionally, tandem mass spectra were generated in a parallel data dependent acquisition mode in the linear ion trap to provide structural information at molecular level. Limits of quantitation were identified at 45 fmol on column and the dynamic range reaches 20 pmol on column, covering the range of natural abundance well. By applying the developed method to mouse brain it can be shown that phosphatidic acid contains less unsaturated fatty acids with PA 34:1 and PA 36:1 as the major species. In contrast, for LPA species a high content of polyunsaturated fatty acids (LPA 20:4 and LPA 22:6) was quantified.

This work reports an efficient and universal SPE method developed for separation and identification of phospholipids derived from complex biological samples. For the separation step, sequential combination of silica gel-aminopropyl-silica gel SPE cartridges is applied. This setup enables separation of phosphatidylcholine, lysophosphatidylcholine, phosphatidylethanolamine, phosphatidylglycerol, phosphatidic acid, phosphatidylinositol, phosphatidylserine, cardiolipin, and sphingomyelin into four fractions according to the polarity of their headgroups. Sample acquisition of the SPE fractions is performed by a high-resolution LC-MS system consisting of a hybrid linear IT Fourier transform ion cyclotron resonance mass spectrometer coupled to RP-HPLC. The unequivocal advantage of our SPE sample preparation setup is avoidance of analyte peak overlapping in the determination step done by RP-HPLC. Overlapping phospholipid signals would otherwise exert adverse ion suppression effects. An additional benefit of this method is the elimination of polar and nonpolar (e.g. neutral lipids) contaminants from the phospholipid fractions, which highly reduces contamination of the LC-MS system. The method was validated with fermentation samples of organic waste, where 78 distinct phospholipid and sphingomyelin species belonging to six lipid classes were successfully identified.

This work aims to combine chromatographic retention, high mass resolution and accuracy, MS/MS spectra, and a package for automated identification and quantitation of lipid species in one platform for lipidomic analysis. The instrumental setup elaborated comprises reversed-phase HPLC coupled to a Fourier transform ion cyclotron resonance mass spectrometer (LTQ-FT), and Lipid Data Analyzer (LDA) software. Data analysis for lipid species quantification in this platform is based on retention time, mass resolution of 200,000, and mass accuracy below 2 ppm. In addition, automatically generated MS/MS spectra provide structural information at molecular level. This LC/MS technology allows analyzing complex biological samples in a quantitative manner as shown here paradigmatically for murine lipid droplets having a huge surplus of triacylglycerol species. Chromatographic preseparation of the bulk lipid class alleviates the problem of ion suppression of lipid species from other classes. Extension of 1D to 2D chromatography is possible, yet time consuming. The platform affords unambiguous detection of lipid species as low as 0.1‰ within major lipid classes. Taken together, a novel lipidomic LC/MS platform based on chromatographic retention, high mass resolution and accuracy, MS/MS analysis, and quantitation software enables analysis of complex samples as demonstrated for lipid droplets.

Alkaline and enzymatic hydrolyzes of poly(ethylene terephthalate) fabrics (PET) were mechanistically compared based on released degradation products (HPLC-UV-RI) and changes in surface properties [hydrophilicity, cationic dyeing, X-ray photoelectron spectroscopy (XPS)]. Enzymatic hydrolysis led to an increase in the amount of hydroxyl and carboxyl groups on the surface resulting in an enhanced water absorption and dyeability. Enzymes partially adsorbed to PET fabrics during hydrolysis were completely removed by subsequent extraction according to XPS analysis. In contrast to the enzyme treatment, alkaline hydrolysis did not lead to an increase of hydroxyl and acid groups according to XPS while both treatments caused a substantial increase in hydrophilicity and were more effective on amorphous fibers. Alkaline hydrolysis led to a greater increase in the K/S value after cationic dyeing due to enlarged surface area. Consequently, ESEM-images demonstrated that alkaline treatment drastically affected the surface morphology of the polymer resulting in crater-like structures of the fibers, whereas after enzymatic treatment the morphology of the fibers remained unchanged. To reach similar benefits in hydrophilicity, drastically higher amounts of degradation products were released during alkaline hydrolysis as also indicated by >6% weight loss compared to

Microwave radiation is used to speed up chemical derivatization. In the present study, three microwave-assisted techniques for the methylation of chlorophenoxy acid herbicides prior to analysis by gas chromatography coupled with mass spectrometry are compared. Derivatization was performed with the catalysts sulphuric acid and boron trifluoride as well as with trimethylsilyldiazomethane. In order to establish optimized and stable conditions, a screening for statistically significant factors by means of experimental designs was carried out and supplemented by a careful optimization. Special emphasis has been given to an accurate validation to prove the performance of the techniques. Furthermore, all microwave-assisted methods were compared with their conventional analogues. The optimized methods are valid for routine analysis of different matrices such as water, soil, sediment or tissues, especially for high sample throughput since a simultaneous derivatization of up to 64 samples in one run is possible.

A polyethylene terephthalate (PET) model substrate, bis-(benzoyloxyethyl)terephthalate (3PET), was used to screen for micro-organisms producing enzymes hydrolyzing PET. From this screen, a strain growing on 3PET was isolated and identified as Penicillium citrinum. The polyesterase responsible for 3PET and PET hydrolysis was purified to electrophoretic homogeneity. The polyesterase had a molecular weight of 14.1 kDa, and the Km and Kcat values on 4-nitrophenyl butyrate were 0.57 mM and 0.21 s−1, respectively. Highest enzyme activities were obtained when P. citrinum was grown on a medium containing cutin, which was hydrolyzed by the polyesterase. Surface hydrolysis of PET with the enzyme lead to an increase in hydrophilicity based on rising height (+5.1 cm) and drop dissipation measurements (55 s). Both from PET and 3PET bis-(2-hydroxyethyl)terephthalate and mono-(2-hydroxyethyl)terephthalate were released, while only low amounts of terephthalic acid were liberated.

Recently the potential of enzymes for surface hydrophilisation and/or functionalisation of polyethyleneterephthalate (PET) and polyamide (PA) has been discovered. However, there was no correlation between enzyme class/activity (e.g. esterase, lipase, cutinase) and surface hydrolysis of these polymers and consequently no simple assay to estimate this capability. Enzymes active on the model substrates bis (benzoyloxyethyl) terephthalate and adipic acid bishexyl-amide, were also capable of increasing the hydrophilicity of PET and PA. When dosed at the identical activity on 4-nitrophenyl butyrate, only enzymes from Thermobifida fusca, Aspergillus sp., Beauveria sp. and commercial enzymes (TEXAZYME PES sp5 and Lipase PS) increased the hydrophilicity of PET fibres while other esterases and lipases did not show any effect. Activity on PET correlated with the activity on the model substrate. Hydrophilicity of fibres was greatly improved based on increases in rising height of up to 4.3 cm and the relative decrease of water absorption time between control and sample of the water was up to 76%. Similarly, enzymes increasing the hydrophilicity of PA fibres such as from Nocardia sp., Beauveria sp. and F. solani hydrolysed the model substrate; however, there was no common enzyme activity (e.g. protease, esterase, amidase) which could be attributed to all these enzymes.

This work reports an efficient and universal SPE method developed for separation and identification of phospholipids derived from complex biological samples. For the separation step, sequential combination of silica gel-aminopropyl-silica gel SPE cartridges is applied. This setup enables separation of phosphatidylcholine, lysophosphatidylcholine, phosphatidylethanolamine, phosphatidylglycerol, phosphatidic acid, phosphatidylinositol, phosphatidylserine, cardiolipin, and sphingomyelin into four fractions according to the polarity of their headgroups. Sample acquisition of the SPE fractions is performed by a high-resolution LC-MS system consisting of a hybrid linear IT Fourier transform ion cyclotron resonance mass spectrometer coupled to RP-HPLC. The unequivocal advantage of our SPE sample preparation setup is avoidance of analyte peak overlapping in the determination step done by RP-HPLC. Overlapping phospholipid signals would otherwise exert adverse ion suppression effects. An additional benefit of this method is the elimination of polar and nonpolar (e.g. neutral lipids) contaminants from the phospholipid fractions, which highly reduces contamination of the LC-MS system. The method was validated with fermentation samples of organic waste, where 78 distinct phospholipid and sphingomyelin species belonging to six lipid classes were successfully identified.

Caveolins form plasmalemnal invaginated caveolae. They also locate around intracellular lipid droplets but their role in this location remains unclear. By studying primary adipocytes that highly express caveolin-1, we characterized the impact of caveolin-1 deficiency on lipid droplet proteome and lipidome. We identified several missing proteins on the lipid droplet surface of caveolin-deficient adipocytes and showed that the caveolin-1 lipid droplet pool is organized as multi-protein complexes containing cavin-1, with similar dynamics as those found in caveolae. On the lipid side, caveolin deficiency did not qualitatively alter neutral lipids in lipid droplet, but significantly reduced the relative abundance of surface phospholipid species: phosphatidylserine and lysophospholipids. Caveolin-deficient adipocytes can form only small lipid droplets, suggesting that the caveolin-lipid droplet pool might be involved in lipid droplet size regulation. Accordingly, we show that caveolin-1 concentration on adipocyte lipid droplets positively correlated with lipid droplet size in obese rodent models and human adipocytes. Moreover, rescue experiments by caveolin- green fluorescent protein in caveolin-deficient cells exposed to fatty acid overload demonstrated that caveolin-coated lipid droplets were able to grow larger than caveolin-devoid lipid droplets. Altogether, these data demonstrate that the lipid droplet-caveolin pool impacts on phospholipid and protein surface composition of lipid droplets and suggest a functional role on lipid droplet expandability.

An alkali stable polyamidase was isolated from a new strain of Nocardia farcinica. The enzyme consists of four subunits with a total molecular weight of 190 kDa. The polyamidase cleaved amide and ester bonds of water insoluble model substrates like adipic acid bishexylamide and bis(benzoyloxyethyl)terephthalate and hydrolyzed different soluble amides to the corresponding acid. Treatment of polyamide 6 with this amidase led to an increased hydrophilicity based on rising height and tensiometry measurements and evidence of surface hydrolysis of polyamide 6 is shown. In addition to amidase activity, the enzyme showed activity on p-nitrophenylbutyrate. On hexanoamide the amidase exhibited a Km value of 5.5 mM compared to 0.07 mM for p-nitroacetanilide. The polyamidase belongs to the amidase signature family and is closely related to aryl acylamidases from different strains/species of Nocardia and to the 6-aminohexanoate-cyclic dimer hydrolase (EI) from Arthrobacter sp. KI72., We would like to thank Markus List for measuring of the hydrophilicity of PA fabrics. The research was financed by the Commission of the European Union (GRD2000-30110 BIOSNYTEX), the Austrian FFG, the SFG, the City of Graz, and the Province of Styria.

A lipase from Thermomyces lanuginosus and cutinases from Thermobifida fusca and Fusarium solani hydrolysed poly(ethylene terephthalate) (PET) fabrics and films and bis(benzoyloxyethyl) terephthalate (3PET) endo-wise as shown by MALDI-Tof-MS, LC–UVD/MS, cationic dyeing and XPS analysis. Due to interfacial activation of the lipase in the presence of Triton X-100, a seven-fold increase of hydrolysis products released from 3PET was measured. In the presence of the plasticizer N,N-diethyl-2-phenylacetamide (DEPA), increased hydrolysis rates of semi-crystalline PET films and fabrics were measured both for lipase and cutinase. The formation of novel polar groups resulted in enhanced dye ability with additional increase in colour depth by 130% and 300% for cutinase and lipase, respectively, in the presence of plasticizer., Many thanks to Ulrike Gewessler and Matthias Pretzler for lab work. The research was financed by the SFG, the FFG, the city of Graz and the province of Styria.

Twelve fungi were screened for the potential of their extracellular enzymes to increase the hydrophilicity of polyamide (PA) materials. The most pronounced increase in hydrophilicity was found for enzymes from Beauveria brongniartii and B. bassiana. The 55 kDa polyamidase from B. brongniartii was purified using ultrafiltration, anion exchange chromatography and size exclusion chromatography. This polyamidase was able to hydrolyse adipic acid bishexylamide and various typical amidase substrates, but did not show protease activity. In contrast, the 27 kDa protease from B. brongniartii did not show activity on PA. The improvement of hydrophilicity due to hydrolysis with the 55 kDa polyamidase from B. brongniartii based on rising height was 11 cm for PA 6 Perlon fibres and 5 cm for PA 6.6 Nylon. The drop dissipation measurement corroborated the improvement of the hydrophilicity giving 7 s and less than 1 s for the two enzyme treated materials, respectively. The surface tension s of Perlon increased from 46.1 to 67.4 mNm after enzyme treatment., The research was financed by the SFG, the FFG, the city of Graz and the province of Styria and by European Commission within the project GRD 2000-30110 Biosyntex

Article in Press, Oligomers and polymers (film, fabrics) of the linear aromatic polyester poly(trimethylene terephthalate) (PTT) were treated with polyesterases from Thermomyces lanuginosus, Penicillium citrinum, Thermobifida fusca and Fusarium solani pisi. The cutinase from T. fusca was found to release the highest amounts of hydrolysis products from PTT materials and was able to open and hydrolyse a cyclic PTT dimer according to RP-HPLC–UV detection. In contrast, the lipase from T. lanuginosus also showed activity on the PTT fibres and on bis(3-hydroxypropyl) terephthalate (BHPT) but was not able to hydrolyse the polymer film, mono(3-hydroxypropyl) terephthalate (MHPT) nor the cyclic dimer of PTT. As control enzymes inhibited with mercury chloride were used. Surface hydrophilicity changes were investigated with contact angle measurements and the degree of crystallinity changes were determined with DSC.