Search

Introduction Percutaneous screw fixation of the posterior pelvic ring is a popular technique to treat unstable pelvic ring lesions. This technique is practicable in both, the high-energy pelvic ring fractures, mostly in the young population as well as the osteoporotic fractures in the elderly. Risk of the transiliac-transsacral screw positioning is that the critical area of nerve root exit has to be passed twice. For secure screw placement, without causing iatrogenic neurovascular injuries, the knowledge of distances to the narrowest areas is essential. Purpose of this anatomical study was to examine the optimal intraosseous screw placement for the first two sacral segments. Material/methods Images of uninjured pelves from 50 patients (64-line CT scanner) were evaluated. Then virtual transiliac-transsacral srews were positioned into the first two sacral segments. The distance from the screws’ entrance points at the ilium's alar bone to the narrowest portion of the whole pedicle as well as the height and width in this area were measured. Descriptive statistics were used and gender related differences were evaluated using student T-test. Results For the first sacral segment the distance to the narrowest zone amounted in mean 62.75 mm, respectively 63.31 mm, depending on the selected way of measurement. For the second segment the mean distance to the neuroforamina was on average 50.61 mm, respectively 51.54 mm. The average height in S1 measured 25.88 mm and the average width 25.49 mm. The average height for S2 was 17.54 mm and the average width 17.61 mm. We could not find any statistically significant gender correlation for the measured distances. Conclusion Results of this anatomical study may help in performing a safe surgical procedure.

BACKGROUND The aim of this study was to investigate the axillary nerve's location along superficial anatomical landmarks, and to define a convenient risk zone. METHODS A total of 123 upper extremities were evaluated. After dissection of the axillary nerve, the vertical distance between the upper border of the anterolateral edge of the acromion and the proximal border of the nerve was measured. Furthermore, the interval between the proximal border and the distal border of the axillary nerve's branches was evaluated. The interval between the distal border of the branches and the most distal part of the lateral humeral epicondyle was measured. The distance between the anterolateral edge of the acromion and the lateral humeral epicondyle was evaluated. Measurements were expressed as proportions with respect to the distance between the acromion and the lateral humeral epicondyle. RESULTS The distance between the acromion and the proximal border of the axillary nerve's branches was at a height of 10 percent of the distance between the acromion and the lateral humeral epicondyle, starting from the acromion (90 percent when starting from the lateral humeral epicondyle). The interval between the proximal and distal margins of the axillary nerve's branches was between 10 percent and 30 to 35 percent of this interval, starting from the acromion (65 to 70 percent when starting from the lateral humeral epicondyle). CONCLUSIONS The authors were able to locate the branches of the axillary nerve at an interval between 10 and 35 percent of the distance between the acromion and the lateral humeral epicondyle, starting from the acromion. This makes the proximal third of this distance an easily applicable risk zone during shoulder surgery.

Objective Helical plating is a known concept in humeral fracture treatment. Attention should be paid to the axillary nerve when inserting a plate underneath the deltoid muscle. The purpose of this cadaveric study was to estimate axillary nerve stretching when introducing the plate. Methods: On 42 fresh frozen human humeri, an 8-, 10- and 12-hole Philos plate in a straight and a helical shape were compared measuring the maximum plate-bone-distance. Results: For all three plate lengths, the helical plates had a significantly lower plate-bone-distance. Conclusion: Indirectly, this suggests a lower axillary nerve elongation and hence less chance of nerve damage.

BACKGROUND: Posterior interosseous nerve (PIN) entrapment syndrome is a rare condition and is predisposed by anatomical factors such as narrow passages through fibrous arcades; whereas, the Arcade of Frohse (AF) is the most common entrapment point. The aim of this study was to evaluate the entrance and exit points of the PIN into the supinator in detail. MATERIALS AND METHODS: One hundred unpaired upper extremities underwent dissection. The PIN’s entrance and exit points from the supinator were depicted. The distances between the tip of the radial head (RH) and the AF and the exit point of the PIN from the supinator were measured. Further, it was checked if the borders of the AF and the exit point were muscular, tendinous or a combination of these. RESULTS: The interval between the PIN’s entry into the supinator and the tip of the RH was at a mean of 28.9 mm. Concerning the border of the AF, in 54 cases a muscular and in 46 specimens a tendinous version could be observed. The interval between the exit point of the PIN and the tip of the RH proved to be at a mean of 64.2 mm. Further, the exit’s border was muscular in 65 specimens and tendinous in 35 cases. CONCLUSION: During surgical treatment of the PIN syndrome, it needs to be kept in mind that approximately one-third of all patients might also suffer from entrapment at the exit point of the PIN.

BACKGROUND: The aim of this study was to evaluate the patellar tendon length (PTL) with focus on gender differences and possible correlations with the total leg length (TLL) and the long bones of the lower extremity. MATERIALS AND METHODS: The sample involved 50 paired lower extremities from human adult cadavers. The TLL was measured between the medial malleolus and the apex of the greater trochanter. The femoral length (FL) was evaluated as the interval between the latter and the distal margin of the lateral epicondyle of the femur and the tibial length (TL) from the distal apex of the medial malleolus to the proximal border of the medial condyle of the tibia. The PTL was measured from the apex of the patella to its proximal insertion point at the tibial tuberosity. RESULTS: The PTL was at a mean length of 4.29 ± 0.49 cm (right side) and 4.20 ± 0.55 cm (left side) in females and 4.42 ± 0.53 cm (right) and 4.32 ± 0.55 cm (left) in males. There were no differences regarding gender (p = .412). The left PTL was significantly shorter in both sexes (p = .022). The PTL correlated positively with FL, TL, and TLL in both sexes and sides. CONCLUSION: PTL correlates significantly positively with size without gender differences.

This study aims to evaluate the relation between the lumbosacral trunk (LT) and the sacro-iliac joint (SIJ). In forty anatomic specimens (hemipelves) a classical antero-lateral approach to the SIJ was performed. The SIJ was marked at the linea terminalis (reference point A). Reference point B was situated at the upper edge of the interosseous sacro-iliac ligament. The length of the SIJ (distance A to B) and the distance between point A and the ventral branch of the fourth (L4) and fifth (L5) lumbar spinal nerves at the linea terminalis were measured. The SIJ had a mean length of 58.0 mm. The ventral branch of L5 was located closer to the SIJ in very long SIJs (mean length: ≥ 6.5 cm; mean distance: 9.8 mm) compared to very short joints (≤ 5 mm; mean distance: 11.3 mm). For the ventral branch of L4, very long SIJs had a mean distance of 7 mm and very short joints an average distance of 9.7 mm between point A and the nerve branch. A safe zone of approximately 1 cm to 2 cm (anterior to posterior) is present on the sacral surface (lateral to medial) for safe fixation of plates during anterior plate stabilization of the SIJ. Pelves with a shorter dorsoventral diameter of the most superior part of the SIJ apparently give more space for inserting plates.

Deep infection is a serious complication in endoprosthetic surgery. In correlation to the patient local or systemic compromising factors conservative and surgical proceedings has to be evaluated. Systemic antibiotic therapy is the gold standard in infection management. Implanted silver-coated or silver-containing medical devices have been proven to their antimicrobial effectiveness since the 1990s by several investigators. The outcomes showed that long time implantation could cause damaging of the surrounding tissues, especially of adjacent nerves. The aim of our study was to evaluate the release of silver (I) ions from bone cement mixed with either nanosilver particles (AgNPs), different concentrations of silver sulfate (Ag2SO4) or from pure metallic silver strips. Therefore, we choose two methods: the first, called “static model”, was chosen to evaluate the maximal accumulative concentration of silver (I) ions, with the second, called “dynamic model”, we simulated a continuous reduction of the ions. In an additional test design, the different materials were evaluated for their antimicrobial activity using an agar gel diffusion assay. The outcome showed that neither the addition of 1% (w/w) nanosilver nor 0.1% silver sulfate (w/w) to polymethylmethacrylat bone cement has the ability to release silver (I) ions in a bactericidal/antifungal concentration. However, the results also showed that the addition of 0.5% (w/w) and 1% (w/w) silver sulfate (Ag2SO4) to bone cement is an effective amount of silver for use as a temporary spacer.

BACKGROUND: The aim of our study was to project the A1-pulley of the thumb onto the total thumb length to enable its complete division with and without direct sight. MATERIALS AND METHODS: The study involved 50 hands from adult human cadavers. The proximal and distal borders of the A1-pulley were measured with reference to the first metacarpophalangeal joint (MCPJ). The length of the thumb was defined as the interval between the first carpometacarpal joint (CMCJ) and the apex of the thumb. The length of the pulley is calculated proportionally with reference to the line between the first CMCJ and apex of the thumb. RESULTS: Approximated by computing 95% confidence intervals, the pulley can be expected to lie in an area between 34.0% (proximal border) and 57.8% (distal border) alongside this line. CONCLUSION: Percutaneous and minimally-invasive division of the A1-pulley needs to be performed between 34.0 and 57.8% of the length between the first CMCJ and apex of the thumb.

INTRODUCTION: Following proximal humeral plate osteosynthesis, mechanical complication rates ranging up to 40% have been reported. The study aims to determine the influence of surgeons' experience and the technique of drilling on the complication rate. MATERIALS AND METHODS: The sample involved 45 cadaveric humeri. Six orthopaedic surgeons were divided into two groups with regard to their level of experience (novice versus expert group). On each humerus two different proximal humerus plates were applied. Drillings were performed either with a sharp or worn drill bit (to simulate either sharp or blunt drilling). The respective holes were drilled until the respective participant thought to have placed the drill bit subchondrally, followed by perforation of the cartilage of the humeral head. Both these values and cases of unintended penetration of the articular cavity were evaluated. RESULTS: Fourteen holes (3.6%) were primary penetrated in the joint cavity in the worn-drill-bit-subgroup and 19 holes (5%) in the sharp-drill-bit-group. The latter had an average distance between the chosen subchondral position and the humeral articular surface of 8.3 mm and the worn-drill-bit-subgroup was at 10.6 mm. In the novice group 20 perforations (5.2%) of the joint space occurred and the mean interval between the chosen subchondral point and the humeral articular surface was 4.0 mm. The experienced surgeons showed a perforation rate of 3.4% and were at a mean of 14.9 mm. There were no significant differences regarding drilling manoeuvres and experience. CONCLUSION: Although our results are satisfactory, they can be traced back to the relatively high interval between the respective chosen position of the drill bit and the humeral articular surface which may not guarantee screw stability during ORIF of all fracture patterns. ispartof: INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED vol:52 pages:S22-S26 ispartof: location:Netherlands status: published

Purpose Application of supraacetabular Schanz screws is usually performed under image intensifier guidance. The aim of this study was to perform it without imaging, with the hypothesis that, respecting anatomical landmarks, pre- and intraoperative fluoroscopy can be avoided. Material & Methods Insertion of the supra-acetabular Schanz screws was performed by two trauma surgery residents in a study sample of 14 human adult cadavers which had been embalmed by use of Thiel`s method. With cadavers placed in supine position, the anterior superior iliac spine (ASIS) was palpated. Starting from this landmark, 2 cm were measured in a distal and 2 cm in the medial direction. At this point, a 2 cm long oblique skin incision was performed. Through this approach, 150 mm Schanz screws were drilled bilaterally into the supra-acetabular corridor with an angulation of 20° to distal as well as 20° to medial. Following screw application, combined obturator oblique-outlet views (COOO) were taken bilaterally in each specimen by use of an Arcadis© Orbic 3D C-arm to prove the screw position. Six of the specimens underwent a 3D-CT-scan. Images were evaluated concerning correct screw positioning by a further traumatologist. Skin and subcutaneous tissues were removed in the ilioinguinal region and possible lesions to the lateral femoral cutaneous nerve (LFCN) or to the joint capsule were evaluated. Results The sample consisted of eight pelves from female and six pelves from male cadavers. During radiographic evaluation of the COOO-scans (14 specimens) and the 3D-scans (6 specimens), the Schanz screws were placed inside the supra-acetabular corridor in all specimens (14/14). During dissections, no intracapsular screw placements or LFCN lesions were found. Conclusion According to the described anatomical data, we defined a 2–2–2–20–20 concept, starting with a 2 cm skin incision 2 cm distal and 2 cm medial to the ASIS with a drill angulation of 20° inferior and 20° lateral orientation. Using this technique, all Schanz screws could be sufficiently inserted without intraprocedural x-ray imaging.

Background The Mangled Extremity Severity Score is a decision-making tool for limb amputation after trauma. The Disabilities of the Arm, Shoulder and Hand questionnaire was developed to quantify posttraumatic functional deficits of the upper extremity. This study aims to determine the correlation between these two assessments. Methods In this study, a retrospective review of all patients with upper extremity injuries who had been treated with vascular reconstruction at two centres between 2005 and 2014 was performed. The respective Mangled Extremity Severity Score was calculated for each participant. Patients were recalled for follow-up examination and assessment of the Disabilities of the Arm, Shoulder and Hand Score. Results In this study, 14 patients met the inclusion criteria. The mean total Mangled Extremity Severity Score was 5.9 and the mean total Disabilities of the Arm, Shoulder and Hand Score was 30 points. There was no statistically significant correlation between these assessments (Spearman's rank correlation coefficient: 0.49, p=0.075). Conclusion The Disabilities of the Arm, Shoulder and Hand Score did not correlate significantly with the Mangled Extremity Severity Score.

Introduction The aim of this study was to perform MIPO of the distal tibia from a dorsomedial and dorsolateral approach and to evaluate their feasibility and risk of injury to adjacent anatomical structures. Material & Methods A total of 18 extremities from 9 adult human cadavers was included in the study. In each cadaver, one lower leg underwent application of a 12-hole 3.5 LCP metaphyseal plate from the medial and the further one from the lateral approach. For the medial approach, a 4 cm skin incision was performed at the tibial border of the Achilles tendon, starting from 1 cm proximal to its insertion point at the calcaneal tuberosity. Entrance was gained between the medial border of the flexor hallucis longus tendon and the medial neurovascular bundle. Regarding the lateral approach, the skin was incised over a length of about 4 cm at the lateral border of the Achilles tendon, approximately 1 cm proximal to its insertion point. Entrance was gained between the Achilles tendon and the peroneus brevis muscle. The plates were inserted in direct bone contact in a proximal direction and the proximal and distal ends were fixed. During dissection, the proximal and distal holes beneath the crossing points of the neurovascular bundle and the plate were noted. The distal and proximal intersection points of the neurovascular bundle and the plate were measured with reference to the distal border of the plate. Results Concerning the medial approach, the neurovascular bundle was on median located between the 6th and 11th plate holes starting from distal. The bundle intersected the plate distally at a mean height of 65.8 mm and proximally at 156.8 mm on average. For the lateral approach, the neurovascular bundle was situated between the 6th and the 12th plate hole from distal. It crossed the plate distally at a mean of 61.0 mm and proximal at a mean height of 153.9 mm. In none of the cases, lacerations of the neurovascular bundle were observed. Conclusion In conclusion, MIPO from the dorsomedial and dorsolateral approach are both safe procedures as indicated by our study.

Introduction The goal of this study was to evaluate distal femoral minimally invasive plate osteosynthesis (MIPO) from a distal medial approach by use of a pre-bent helical implant. Material & Methods A total of 18 lower extremities was evaluated. A 29.6 cm steel plate was constructed and pre-bent on bone specimens with a torsion of 55.7° A 5 cm incision was performed from the tip of the medial epicondyle alongside its centre in a proximal direction. The medial border of the vastus medialis was retracted anteriorly. The level of the proximal skin incision was determined using the length of the pre-bent plates. The proximal incision was performed at a length of 4 cm at the described height at a line between the lateral epicondyle and the tip of the greater trochanter. A raspatory was advanced beneath the vastus medialis in a proximal direction to create an extraperiosteal tunnel for plate insertion. The plate was fixed to the bone at its proximal and distal portion via screws. Following dissection, the distance between the nearest perforator to the proximal plate end was evaluated. The vertical distances between the medial border of the plate and the femoral artery and femoral nerve were measured at the level of the proximal plate end and at the level of the proximal margin of the vastoadductor membrane. Results The most proximal perforating artery was located at a mean distance of 20.15 mm starting from the proximal plate margin. The mean interval between the medial border of the plate at the level of its proximal tip and the femoral artery was 51.9 mm. The average distance between the femoral nerve and the medial border of the proximal part of the plate was 42.3 mm. Regarding the interval between the medial border of the plate and the femoral artery, this was at a mean of 40.5 mm at the level of the proximal margin of the vastoadductor membrane. During dissection, none of the specimens showed any lesions of the adjacent anatomical characteristics. Conclusion Our results indicate MIPO of the distal femur from a medial approach as a safe technique.

The purpose of the study was to evaluate the relationship of implant-related injuries to the adjacent anatomical structures in a newer generation straight proximal humeral nail (PHN) regarding different entry points. The proximity of the proximal lateral locking-screws of the MultiLoc proximal humeral nail (ML PHN) may cause iatrogenic tendon injuries to the lateral edge of the bicipital humeral groove (BG) as reference point for the tendon of the long head of biceps brachii (LBT) as well as the lateral insertion of the infraspinatus tendon (IST).The study comprised n = 40 upper extremities. Nail application was performed through a deltoid approach and supraspinatus tendon (SSP) split with a ML PHN. All tests were performed in three different entry points. First nail (N1) - standard position in line with the humeral shaft axis; second nail (N2) - a more lateral entry point; third alternative (N3) - medial position, centre of the humeral head. After nail placement, each specimen was screened for potential implant-related injuries or worded differently hit rates (HR) to the BG and the IST. The distances to the anatomical structures were measured and statistically interpreted.The observed iatrogenic IST injury rate was 17.5% (n = 7/40) for N1, 5% (n = 2/40) for N2 and 62.5% (n = 25/40) for N3, which was statistically significantly higher (p 0.001). Regarding the BG, the evaluated HR was 7.5% (n = 3/40) for both N1 and N2. Only the nail placed in the head centre (N3) showed an iatrogenic injury rate of 20% (n = 8/40) (p 0.062). No statistically significant association between humeral head size and the HR could be observed (head diameter: IST: p = 0.323, BG: p = 0.621; head circumference: IST: p = 0.167; BG: p = 0.940). For the IST and BG, all distances in nail positions N1 and N2 as well as N2 and N3 differ statistically significant (p 0.001).An entry point for nail placement in line or slightly laterally to the humeral shaft axis - but still at the cartilage - should be advocated.

A study was undertaken to examine the presence of the distal oblique bundle of the forearm in a large sample in order to describe its true prevalence. The study sample consisted of 200 cadaveric forearms. Fifteen were excluded due to defects in the distal interosseous membrane. In the remaining 185 specimens, the distal interosseous membrane was examined following removal of soft tissue, to determine whether a distal oblique bundle was present and whether there were connecting fibres to the distal radio–ulnar joint. The distal oblique bundle was observed in 53 specimens (29%). In 45 of these forearms (85%), one or more connecting fibres to the distal radio–ulnar joint were identified. The presence of a distal oblique bundle in 29% is less frequent than that reported in previous literature. The presence of the distal oblique bundle should be noted and may be of importance in the management of disorders of the distal radio–ulnar joint.

Background Although needle decompression of tension pneumothorax through the second intercostal space in the midclavicular line (Monaldi’s approach) is a life-saving procedure, severe complications have been reported after its implementation. We evaluated the procedure by comparing how it was performed on cadavers by study participants with different training levels. Methods Six participants including one thoracic surgeon performed bilateral thoracic drainage after Monaldi on 82 torsos. After the thoraces were opened, the distances from the internal thoracic artery (A), the site of the puncture (B) and the midclavicular line (C) were measured bilaterally with reference to the median of the sternum. Further, it was determined whether the participants had correctly identified the second intercostal space. The differences between B-A and C-B were analysed. Results The needle was placed in the second intercostal space in 136 hemithoraces (83%). The thoracic surgeon showed a hit rate of 0% laceration of adjacent vessels. All the other participants had hit rates between 10% and 15%. The interval B-A ranged from 2.88 to 5.06 cm in right and from 3.00 to 5.00 cm in left hemithoraces. The distance C-B lay between 1.03 cm and 1.87 cm (right side), and 0.84 cm and 2.02 cm (left side). Conclusion In our collective, the main problem was failure to assess correctly the lateral extension of the clavicle. If this fact is emphasized during training, Monaldi’s approach is a safe method for needle decompression of pneumothorax.

Aufgrund der grosen Heterogenitat bezuglich Morphologie und Stabilitat gibt es bis dato keinen Konsens fur die Therapie von Sakruminsuffizienzfrakturen. Wir berichten uber den Fall einer 79-jahrigen Patientin, welche aufgrund von beidseitigen Sakruminsuffizienzfrakturen bei Zustand nach vorderer Beckenringfraktur mit Teriparatid behandelt wurde. Die Patientin konnte im Rahmen eines zweiwochigen stationaren Aufenthaltes erfolgreich mobilisiert werden. Die im Therapieverlauf durchgefuhrten Rontgenkontrollen zeigten abschliesend eine vollstandige Konsolidierung der Frakturen.

The aim of our study was to project the borders of the flexor retinaculum (FR) onto superficial landmarks since its insufficient splitting is the most common reason for persistence of symptoms after carpal tunnel release. In 60 hands the radial and ulnar styloid processes were linked by a horizontal line and a longitudinal line was laid through the ring finger's radial side. These were intersected resulting in the reference point "A" on the forearm. As the second basing point "B", the radial margin of the ring finger at the palmar digital crease was chosen. Measurement of the FR was carried out with regard to the reference points. The proximal margin of the FR was located at 4% of the reference line A-B starting from point A and extended up to 52% of this total length. Results indicate that splitting alongside the proximal half of line A-B divides the FR completely. Clin. Anat. 30:512-516, 2017. © 2017 Wiley Periodicals, Inc.

The Mangled Extremity Severity Score (MESS) was constructed as an objective quantification criterion for limb trauma. A MESS of or greater than 7 was proposed as a cut-off point for primary limb amputation. Opinions concerning the predictive value of the MESS vary broadly in the literature. The aim of this study was to evaluate the applicability of the MESS in a contemporary civilian Central European cohort. All patients treated for extremity injuries with arterial reconstruction at two centres between January 2005 and December 2014 were assessed. The MESS and the amputation rate were determined. Seventy-one patients met the inclusion criteria and could be evaluated for trauma mechanism and injury patterns. The mean MESS was 4.97 (CI 4.4–5.6). Seventy-three per cent of all patients (52/71) had a MESS

The aim of this study was to investigate the intersection point of the radial artery (RA) with Henry's approach. Ninety forearms from adult human cadavers which had been embalmed using Thiel's method underwent dissection. Henry's approach was performed alongside the whole length of the forearm, and the RAs course was investigated. Its crossing point with the approach was identified, and the distance from this point to the radial styloid process was determined. In addition, the total radial length (RL) was measured from the radial styloid process to the proximal margin of the radial head. The former measurements were analyzed as proportions with regard to the total RLs. Concerning right radii, the intersection point was, on average, at a proportion of 56.2% of the radius, starting from the tip of the radial styloid process. In left radii, this was located at a mean proportion of 61.2%. In cases of multiply fractured radii, care must be taken at the interval between 40% and 80% to avoid RA lesions during dissection from distal to proximal. Clin. Anat., 33:983-987, 2020. © 2019 Wiley Periodicals, Inc.

Puncture of the temporomandibular joint (TMJ) is a minimally invasive treatment for various jaw disorders. This study used a cadaveric model to evaluate the procedure from two entrance points with respect to hit ratio and possible complications, such as extraarticular extrusion of injection fluid. Ten heads, embalmed with Thiel's method, were investigated. A straight line drawn with a colored pen connected the center of the tragus and the lateral canthus. The first portal "A" was located at a distance of 1 cm anterior and 2 mm caudal from the center of the tragus. Portal "B" was located 2 cm anterior and 1 cm caudal starting from the same reference point. Punctures "A" and "B" were performed alternately on the right and left sides. Specimens were dissected and the local distribution of the injected latex was recorded. With Approach A, four punctures (40%; 4/10) reached the TMJ, whereas with Approach B, six injections (60%; 6/10) entered the TMJ. There were no statistically significant differences between the tested puncture methods (P = 0.0317) and body sides (P = 1). With each method, for example, 35% (7/20) each, the injected latex was either periarticular or retromandibular. In a further 20% (4/20), it was located subperiosteally alongside the ramus of mandible. The latex was injected into the infratemporal fossa and the external acoustic meatus in one case each (each 5%). There was no statistically significant difference between the techniques. The adjacent anatomy has to be kept in mind during TMJ puncture as the complication rate was remarkably high, suggesting that ultrasound guided intraarticular injection could improve the hit rate. Clin. Anat., 33:683-688, 2020. © 2019 Wiley Periodicals, Inc.

Introduction: Differences of anatomical characteristics regarding side and gender have been the topic of interest in various recent studies. Studies have reported either significant or insignificant differences of the bony pelvis. The aim of this study was to evaluate possible gender and side differences of the pelvis in a cadaveric model. Material and Methods: Fifty human cadaver pelves, preserved by the use of Thiel's method, underwent measurement during this study. Diverse parameters were measured on both hemipelves by three surgeons. Analysis of the morphology of the acetabular cavity was performed by measuring its longitudinal, horizontal, and maximal diameters. Results: The distance between the anterior superior iliac spine and the posterior superior iliac spine (females: mean of 15.9 cm; males: mean of 16.9 cm) and the horizontal diameter of the acetabular cavity (females: mean of 4.5 cm; males: mean of 4.9 cm) were statistically significantly shorter in females than in males. The subpubic angle was significantly (P

The aim of this study was to evaluate the anatomical characteristics of the anterolateral ligament of the knee (ALL) with the focus on potential gender differences. The ALL length and the length of the lateral collateral ligament (LCL) were taken in extension. The length of the anterior cruciate ligament (ACL) was measured at 120° flexion. We correlated the length of the ALL with the LCL and ACL with respect to potential gender differences. The ALL was significantly (p = 0.044) shorter in females (mean length: 32.8 mm) compared to males (mean length: 35.7 mm). The length of the ALL correlated significantly positively with the lengths of the ACL (p

The posterior interosseous nerve (PIN) is at risk during the posterior and lateral approaches to the proximal radius. We aimed to define a safe zone for these approaches to avoid injury of the PIN and to evaluate their close and changing relationship to the nerve during forearm rotation. The study collective consisted of 50 upper limbs. After performance of the lateral approach, the distance between the tip of the radial head and the PIN’s exit point from the supinator (= distance 1) and the shortest interval between the nerve’s exit to the radial margin of the ulna (= distance 2) were measured in maximum pronation and supination. Then, the dorsal approach was conducted and again distance 1 and the interval between the distal margin of the anconeus and the nerve’s exit point (distance 2) were evaluated (pronation and supination). There were significantly shorter distances during supination in comparison to pronation. Regarding the lateral approach, distance 1 changed from a mean of 60.3 mm (supination) to 62.7 mm in pronation (p

Background No publication has yet described the interface between the radius and the plate in various positions. Neither clinical examination nor assessment of fracture radiographs provides information about the anatomy of the radius before injury. Purpose We investigated radius anatomy to analyse dorsal and volar plate-to-bone fit for radial shaft fracture management. Methods We examined 20 specimens from human adult cadavers. An 8-hole 3.5-mm titanium locking plate was used at three different positions on the dorsal and the volar side of the bone. The space between the well-positioned plate and the radial shaft was attained for each hole of the plate. Results The average space between the midshaft radial cortex and the plate holes for all positions was 0.69 mm (range: 0.0 mmto 2.38 mm). The greatest mean distance between the plate and the radial cortex was measured at the volar mid-diaphyseal position of the plate with an average of 1.31 mm. Conclusion This incongruence between the radial cortex at the volar diaphysis and the plate should be considered when applying plates to this position of the radius. The results of this cadaver study indicate that radius plate osteosynthesis should preferably be done from the dorsal side.

Background Opinions vary concerning the position of forearm rotation during detachment of the supinator in radial nerve palsy Henry’s and Thompson’s approaches. Purpose To define the optimal forearm position for a safe detachment of the supinator during these approaches and to clarify their close relationship to the posterior interosseous nerve (PIN). Methods The study sample comprised 90 upper extremities of 45 human adult cadavers, embalmed using Thiel’s method. After detection of the radial nerve in the interval between the brachialis and brachioradialis, its pathway was traced to the Arcade of Frohse (AF). Measurements involved the distance between the AFand the radial border of the distal biceps tendon (DBT) in pronation and supination, the interval between the AF and the radiocapitellar joint space (RCJS) in supination and the radial length (RL). Results Distances between the DBT and the AF were significantly shorter during pronation (right side: 14.1 ± 3.4 mm; left side: 13.5 ± 3.2 mm) compared with supination (right side: 20.5 ± 3.6 mm; left side: 19.8 ± 3.5 mm) for both right and left extremities. The mean interval between the AF and the centre of the RCJS was 25.2 ± 5.9 mm for the right side and 24.7 ± 5.6 mm for the left side, which correlated positively with the RL. Conclusion These results indicate a safe detachment of the supinator from the radius with the forearm placed in supination during both Henry’s and Thompson’s approaches.

Erratum zu: Unfallchirurg 2017 10.1007/s00113-017-0400-8 In der zunachst veroffentlichten Online-Version des Beitrags waren die Autoren nicht vollstandig angegeben. Wir bitten die korrekte Angabe zu beachten und den Fehler zu entschuldigen. Die Redaktion