Search

A sustainable approach to the small-scale treatment of portable toilet and septic tank waste is in need to minimise the associated public health and environmental risks. Treatment of human wastes is highly regulated by legislation in many countries given the high content of organic components and pathogens. In conventional wastewater treatment plants, sewage undergoes a series of treatment stages (primary, secondary and tertiary) before effluent discharge. Delivering this approach on a small scale, to meet demands of temporary events, public gatherings or remote locations provides benefits in reducing transport and bulk handling. For a small-scale treatment process to effectively work, the process steps need to be simplified and minimised. The potential of a new treatment scheme is reviewed where the first step is the solid–liquid fraction separation, followed by anaerobic digestion (AD) of the solid fraction, including energy recovery in a combined heat and power unit. The liquid fraction undergoes a series of filtration and disinfection steps to comply with effluent regulations. Digestate from AD is burned on site to provide local domestic/office heating. This has a great potential for application in different locations where inputs may be sporadic, such as outdoor festivals, disaster response scenarios and construction sites.

The global COVID-19 pandemic has exacerbated existing health, social, and economic challenges and threatened progress towards achieving the UN sustainable development goals. We discuss lessons learned from the COVID-19 pandemic for global policymaking for health security governance, with a particular focus on antimicrobial resistance. We identify One Health as the primary foundation of public health risk management owing to the collaborative, multidisciplinary, and multisectoral efforts that underpin the One Health approach and that enhance understanding of the complex interactions at the human-animal-environment interface. We discuss the narrow human-centric focus of the One Health approach, highlight the underrepresentation of the environmental sector in One Health networks, and encourage greater representation from the environmental sector. Furthermore, we highlight the importance of the social sciences for health security research and the need for effective communication and trust. Finally, we underscore the importance of strengthened and collaborative health, social care, and disaster management systems. The application of these lessons will facilitate holistic, multisectoral, collaborative, and ethical actions on antimicrobial resistance.

International audience; AimsRare earth elements (REEs) and normalized REE patterns determined in plant and soil samples represent powerful tools to trace biogeochemical processes during weathering, soil genesis and processes in the rhizosphere, and thus publications reporting REE concentrations and normalized REE patterns in soil systems and plants are rapidly increasing.MethodsA normalized REE pattern allows for the recognition of anomalous concentrations of an individual REE. In the literature, anomalies are predominantly reported/focused for/on the redox-sensitive elements cerium (Ce) and europium (Eu) that can shift their oxidation state during interactions with organic and inorganic soil phases and the biological processes affecting their mobility in soil and uptake by plants. Thus positive Eu anomalies in plants are often interpreted as a consequence of reduction of Eu3+ to Eu2+ in the rhizosphere followed by a preferential uptake of Eu2+.ResultsDue to an analytical artefact in ICP-MS analysis, a false Eu anomaly may be reported. This can be avoided by using a barium (Ba) interference correction. We draw attention to the possibility of this problem and to being aware of its potential occurrence when Eu anomalies are reported.ConclusionsWe recommend (i) including information on how this potential problem was dealt with in the Materials and Methods section of articles and (ii) how to implement Findable Accessible Interoperable and Reusability (FAIR) guiding principles in that section (including data availability in an open repository).

The Miocene Zhujiang Formation is the key horizon for oil and gas exploration in the Pearl River Mouth basin of northern South China Sea. With the help of core observation, seismic attributes and various analytical data, the sedimentary facies marks, distribution of sedimentary facies and depositional model of forced regression in the Miocene Zhujiang Formation of the Pearl River Mouth basin, northern South China Sea, have been studied. Forced regressive deposits were formed during the period when relative sea level ranged from highstand to lowstand and the sediments were forced to undergo progradation so that five sets of foreset delta deposits are developed in turn. In the early stage of forced regression, the normal delta where the delta plain, delta front and prodelta are not absent mainly developed. In the later stage of forced regression, the shelf edge delta with only the delta front and the prodelta, the longshore bar along the shelf break and the turbidite fan in the deep water of the slope area were developed. The favorable reservoir of forced regressive deposits are located near the upper boundary of the falling stage systems tract and the basal surface of forced regression, and they are the sand bodies of shelf edge delta, longshore bar and turbidite fan. The research results may provide guidance for reservoir prediction.

The 2017 ban on the waste import and new policies for the waste management sector in mainland China had wide-spread impact. After decades of poor environmental and public health impacts from the sector, a study is needed which focuses on policies updates and waste management. This provides a direction for the survival of local waste management industries and consider similarities with the ban promulgated in China on the restriction of waste import from other countries. We review the waste management situation in China before national legislation prevented the import of waste, highlight the status of landfill mining in China, and review the dynamics of domestic policies before and after the promulgation of the ban in China. The impact of the COVID19 pandemic on the waste management system is starting to emerge, providing both challenges and opportunities for the sector in China. We see the impact of the ban on the range of imported waste and domestically generated materials. The ban results in price increases for domestic recycling that forces companies to introduce more formal recycling processes and to drive the consumption behaviours to more reasonable and environmentally friendly options. The driver in China is to reduce pollution in the environment and improve health, but a negative impact has been from increased landfill mining which has impeded the original aim of the waste ban and requires further technological development. The dynamic of domestic policies in China shows higher level of activity of updates and revisions or introduction of new policies from 2015 onwards and the concept of ‘zero waste cities’ brings new hope for improvement of the Chinese waste management system. The pandemic also suggests an important step to establish sustainable management systems despite evidence of increased “fly-tipping”. The rebound of the waste ban may have stimulated in the short term negative impacts on local environments both in China and internationally.

Xikuangshan antimony mine in Lengshuijiang, China, has been developed for many years, and stormwater runoff contains high levels of potentially toxic elements (PTEs). The aims were to find the sources of PTEs by statistical analysis and local spatial distribution of industrial activity and simulate transport process of PTEs in the soil to evaluate pollution extent and health risk. The PTEs in this study were antimony, cadmium, zinc, nickel, lead, and copper. The result showed antimony and a minor portion of zinc were derived from the antimony processing activities, copper derived from agricultural activities, and most of the zinc came from the zinc industry. Nickel, lead, and cadmium came from a mixed source of atmospheric transportation, vehicle transport, and other local industrial activities. Besides, antimony was the most hazardous element in this mining area. In the fourth year, the groundwater in the whole area was uncontaminated by antimony, and there was no non-carcinogenic health risk. Except for the southern area of Lianxi River and the area enclosed by South mine, Zhumushan village, and Tailing Dam, there was a non-carcinogenic risk at year 5.4. These sources of PTEs found in the stormwater runoff are useful for locals to control of PTEs pollution. And the health risk assessment method helps evaluate the risk of PTEs caused by stormwater runoff.

In this study, we analyzed 53 topsoil samples from the Xikuangshan South Mine in Hunan Province to investigate the distribution characteristics of pH and the concentrations of selected metals to determine the controlling factors and identify their sources. Kriging interpolation, correlation analysis, principal component analysis, the index of the geoaccumulation index, and Hakanson's potential ecological risk were applied. The results show that the mean values of Pb, As, Cd, and Sb in the study area were larger than the background value of mountain soil in Hunan Province, and only the average Cr concentration was slightly lower than the background value. The spatial distributions of pH and five metals in the soil were very different, indicating that pH had no significant effect on the distribution of the metals. The wind, rivers, and land-use patterns in different regions of the study area may be the main reasons for their distribution patterns. The correlation component and principal component analysis revealed that Pb showed positive correlations with Cr and Cd, respectively, and Sb-As and Cr-Cd showed strong paired correlations. The cumulative proportion of the first two components accounted for 70.516% of the total variance, which suggests that mining activities are a major source of As and Sb, whereas Pb, Cr, and Cd were derived from natural and anthropogenic sources. The geoaccumulation index revealed that the major pollutants in the soils were mainly Cd, followed by Sb and As. The soils in the study area were moderately contaminated with Pb and lightly polluted by Cr. The ecological hazards of each metal in descending order were Cd Sb As Pb Cr. The index of the comprehensive potential ecological risk for metals indicated that the Xikuangshan South Mine is at or above a moderate ecological risk level, with an extremely strong potential for ecological risks posed by Cd and Sb. Integr Environ Assess Manag 2022;18:748-756. © 2021 SETAC.

China is currently facing great challenges in preventing land from further contamination by industrial activity. We evaluated the current state of business activity supporting the prevention and control of soil pollution through good waste management practice to restrict further soil contamination. The study focused on understanding drivers to improve the development of business activity in both waste management and remediation sectors in China. The status of organizations which manage solid waste and industrial operations providing remediation, professional materials, equipment, and approaches to site management are highlighted. Using questionnaires and a limited number of follow-up interviews, we consulted with remediation practitioners (>100 respondents including construction contracting workers, consultancy, equipment suppliers, and government department employees) working across China. The results identified that the site risk assessment and the wider construction phases for site remediation are typically based on guidelines from government and/or local government. The most frequently used materials for solidification or stabilization during remediation were clay minerals. Local government funds financed most remediation activities. Waste recycling would be a path to further reduce pollution from site development and its application in remediation techniques is possible. In addition to remediation methods, a strategic framework can be employed to provide decision support when assessing sites or decision-making for remediation projects. The priorities for remediation highlight that two types of soil use (arable land and land for construction) should be prioritized for remediation. This evaluation of industry practice provides useful models for wider decision-making in site remediation.

The concentration of hydrolyzed coagulant ion species is a key factor in determining drinking water treatment efficiency. Direct correlation of water treatment efficiency with changes in species during coagulation has not been addressed. We investigated the correlation under different hydraulic conditions and water treatment efficiencies including changes in removal of turbidity, ultraviolet adsorption at 254 nm (UV254) and dissolved organic carbon (DOC). Results highlighted that Al species (monomeric species as Ala, medium polymeric species as Alb and colloidal species as Alc) behaved differently during coagulation and treatment efficiencies were affected. When varying the mixing speed, the removal of Alc species had a strong negative correlation with water treatment efficiency but under other hydraulic conditions positive correlations were found. The removal of Ala species was positively correlated with water treatment efficiency, but under other hydraulic conditions the low abundance of Ala species meant the correlation was difficult to observe. The Alb species were significantly and positively correlated with water treatment efficiency with the highest correlation coefficient (R2) of 0.87. The correlation of metallic species with removal efficiencies of the DOC and the UV254 produced higher R2 values. Correlation of the rate of removal of Alb species with the removal efficiencies of the DOC or the UV254 was better than for Alc. HIGHLIGHTS Hydrolyzed coagulant ion species is considered as one of key factors in determining drinking water treatment efficiency.; Drinking water treatment efficiency is often correlated with the distribution species in coagulant rather than water.; The variation of the species removal was investigated in the coagulation system.; Under varied hydraulic conditions a positive response in correlation was presented.

An investigation of environmental geochemistry of shale rock, soil and water in parts of Abakaliki, southern Benue Trough , Nigeria was carried out in order to evaluate the impact of shale bedrock in the soil and water environment. Shale rock, soil and water samples were collected from ten (10) locations within the study area and were analysed for major and trace elements using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). In situ parameters such as pH, in water were measured in the field. The results show that Pb is highly enriched while As. Cr, Co, Fe, Ni, Sr, V and Zn are slightly enriched in the shales relative to the global shale average. Similar geochemical trend was observed for surface and subsurface soils. Also, the mean concentrations of As, Co. Cu. Mn, Pb and Zn in soils at both depths are higher than the mean concentrations in the shale bedrock in the area of study, implying relative enrichments of these metals in the soils of the study area. In addition, the mean values of Al, Fe, Ti, Cr, Ni, Sr and V in both soil depths are lower than the values recorded in the shale bedrock. Relationship between pH and metal load suggested that the waters are dominantly near neutral to alkaline range suggesting that acidic contaminants do not affect the water quality. The mean concentrations of Al, Fe, Mn and Pb in groundwater and surface water were above the regulatory standards indicating contamination of the water. The calculated enrichment factor, anthropogenic input, pollution index for soil indicated that the soil are highly contaminated through numerous geogenic and anthropogenic sources with Pb being the most toxic metal with the shale bedrock and the mineral load contained in them as the major contributor of these contaminants.

Potentially toxic elements (PTEs) in manganese ore areas are prevalent in rainwater runoff and pose a major threat to human health. In this study, field investigation and geostatistical analysis methods of positive matrix factorization (PMF) and geographic information systems (GIS) were used to systematically study the pollution in rainwater runoff from a manganese mining area in Xiangtan, China, to evaluate source contributions for the health risk assessment of PTEs. The average concentrations (mg/L) of six PTEs were: 0.3357 (Mn), 0.0450 (Ni), 0.0106 (Cu), 0.0148 (Zn), 0.0068 (Cd) and 0.0390 (Pb). The coefficients of variation (CV) for Mn and Zn were >180% and >130%, with the other analytes having values below 70%. The GIS and PMF analysis produced more refined spatial source apportionments, including mining, smelting, transportation, agricultural production and natural sources. The results of the health risk assessment showed that the non-carcinogenic risk was negligible, and the carcinogenic risk was potentially dangerous but acceptable for both adults and children. In addition, the children's total carcinogenic risk value was greater than that of adults, highlighting their vulnerability. This study demonstrates the potential of PMF to provide a framework to spatially prioritize treatment objectives within the mining region to improve environmental conditions. HIGHLIGHTS Mn is the most serious contaminating element in rainwater runoff.; PMF was used to analyze five sources of PTEs in rainwater runoff.; These present no health risks in the region.

The development and utilization of magnetic nanoadsorption materials with large adsorption capacity and easy separation are the research hotspot nowadays. In this study, nanosheet-assembled maghemite (γ-Fe2O3) magnetic microspheres were successfully synthesized by an environmental friendly, quick, and simple method, for enhanced Sb(III) removal from aqueous solution. Scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), and Brunauer-Emmett-Teller (BET) were used to characterize the material. The results showed that the product contained flower-like γ-Fe2O3 microspheres composed of petal-shaped nanosheets interspersed with each other. The specific surface area and pore volume were 69.23 m2/g and 0.15 cm3/g, respectively. The material has a strong magnetic response, which allows rapid solid-liquid separation under the action of an external magnetic field. The effects of different dosages, solution pH, and contact time on the adsorption effect were studied by batch adsorption experiments, and the reusability of the materials was evaluated. Both Freundlich isothermal adsorption model and pseudo-second-order kinetic model were able to describe the uptake of Sb(III). The maximum adsorption capacity of the material was 47.48 mg/g under optimal conditions. The adsorption mechanism is mainly that Sb and lattice oxygen (OX2-) form Fe-O-Sb coordination bonds, which is incorporated into the crystal structure of γ-Fe2O3 as inner-sphere surface complexes. The synthetic material has the advantage of simple preparation process, good adsorption capacity, operation over a wide range of pH, and easy physical separation from treatment systems with good potential for future application to treat polluted wastewater.

In this discussion, we highlight that the terms sorption and adsorption are often confused and misused in many articles. Even if one thought their formal definition is well known, this does not appear to be the case.We recommend encouragement to adopt the word adsorption only when fully supported by appropriate data and using the sorption terminology when it is morespeculative, typically in complex solid/fluid natural systems.

To evaluate the potential of sepiolite-based materials to resolve environmental pollution problems, a study is needed which looks at the whole life cycle of material application, including the residual value of material classified as waste from the exploitation of sepiolite deposits in the region or from its processing and purification. This would also maximize value from the exploitation process and provide new potential for local waste management. We review the geographical distribution of sepiolite, its application in the treatment of potentially toxic elements in soil and across the wider landscape, an assessment of modification and compositional variation of sepiolite-based applications within site remediation and wastewater treatment. The potential of sepiolite-based technologies is widespread and a number of processes utilize sepiolite-derived materials. Along with its intrinsic characteristics, both the long-term durability and the cost-effectiveness of the application need to be considered, making it possible to design ready-to-use products with good market acceptance. From a critical analysis of the literature, the most frequently associated terms associated with sepiolite powder are the use of lime and bentonite, while fly ash ranked in the top ten of the most frequently used material with sepiolite. These add improved performance for the inclusion as a soil or wastewater treatment options, alone or applied in combination with other treatment methods. This approach needs an integrated assessment to establish economic viability and environmental performance. Applications are not commonly evaluated from a cost–benefit perspective, in particular in relation to case studies within geographical regions hosting primary sepiolite deposits and wastes that have the potential for beneficial reuse.

Chemical oxidation is a key technique used in dye wastewater treatment via the formation of hydroxyl radicals. To obtain optimal treatment effects, it is critical to understand the interaction of the molecular structure of the dye with the hydroxyl radical. We evaluated fluorescence excitation-emission matrix spectroscopy to study the decay of an azo-dye (Procion Red MX-5B) by a hydroxyl radical generated from catalytic Fe (III) on H2O2. Results showed that fluorescence signal reliably indicated the variations of the chemical groups and components during degradation, and the degradation could be divided into three stages: initial degradation (decolorisation), rapid intermediate degradation, and final degradation. Under control of uncorrected matrix correlation, the fluorescence fractions could be fitted successfully by parallel factor model (PARAFAC) model: two fluorescence components in initial degradation including mono substituted benzene and mono substituted naphthalene, three components as multi substituted benzene in rapid degradation, and no components could be resolved in the final degradation. The results from the study demonstrate the utility fluorescence characterization of dye degradation mechanisms and enhance the understanding of the degradation mechanisms.

How to effectively remove excess Sb(III) in the water environment by biosorption is receiving close attention in the international scientific community. To obtain the maximum biosorption efficiency, response surface methodology (RSM) was employed to optimize a total of 13 factors for biosorption of Sb(III) onto living Rhodotorula mucilaginosa DJHN070401. The mechanism of biosorption and bioaccumulation was also studied. The results showed that biosorption reached 56.83% under the optimum conditions. Besides, pH, Fe2+, and temperature are significant influencing factors, and control of Ca2+ and Fe2+ has a beneficial impact on Sb(III) biosorption. The characterization explained that physical adsorption occurred readily on the loose and porous surface of DJHN070401 where carboxyl, amidogen, phosphate group, and polysaccharide C-O functional groups facilitated absorption by complexation with Sb(III), accompanied by ion exchange of Na+, Ca2+ ions with Sb(III). It was also noted that the living cell not only improved the removal efficiency in the presence of metabolic inhibitors but also prevented intracellular Sb(III) being re-released into the environment. The results of this study underpin improved and efficient methodology for biosorption of Sb(III) from wastewater.

Removal of dissolved organic matter (DOM) is a major problem in drinking water treatment, because DOM modifies color, taste and odor, and carcinogenic by-products of DOM can be created during disinfection. Efficient water remediation is limited by our poor knowledge of DOM structure and properties, thus calling for advanced methods of characterisation. Here, we tested the influence of two coagulants, polymeric ferric sulfate and cationic polyacrylamide, on the three-dimensional fluorescence excitation–emission wavelength spectra of DOM during coagulation. Results of the parallel factor model reveal 3 fluorophore components C1–3. Cationic polyacrylamide decreases the linear correlation between DOM and fluorescence, e.g., from 0.92 to 0.82 for C1 and from 0.84 to 0.79 for C2. The C3 component, a protein-like material, was the most affected. Findings demonstrate the need to consider residual polymer as a potential interference when using fluorescence to assess DOM removal by coagulation.

Accurately inverting changes in the reservoir elastic parameters that are caused by oil and gas exploitation is of great importance in accurately describing reservoir dynamics and enhancing recovery. Previously numerous time-lapse seismic inversion methods based on the approximate formulas of exact Zoeppritz equations or wave equations have been used to estimate these changes. However the low accuracy of calculations using approximate formulas and the significant calculation effort for the wave equations seriously limits the field application of these methods. However, these limitations can be overcome by using exact Zoeppritz equations. Therefore, we study the time-lapse seismic difference inversion method using the exact Zoeppritz equations. Firstly, the forward equation of time-lapse seismic difference data is derived based on the exact Zoeppritz equations. Secondly, the objective function based on Bayesian inversion theory is constructed using this equation, with the changes in elastic parameters assumed to obey a Gaussian distribution. In order to capture the sharp time-lapse changes of elastic parameters and further enhance the resolution of the inversion results, the blockiness constraint, which follows the differentiable Laplace distribution, is added to the prior Gaussian background model. All examples of its application show that the proposed method can obtain stable and reasonable P- and S-wave velocities and density changes from the difference data. The accuracy of estimation is higher than for existing methods, which verifies the effectiveness and feasibility of the new method. It can provide high-quality seismic inversion results for dynamic detailed reservoir description and well location during development.

This paper presents a method for combining the hybrid eikonal solver and the prior velocity information to obtain high-resolution crosswell imaging. The hybrid eikonal solver in this technique can ensure rapid and reliable forward modeling of traveltime field in an unsmoothed velocity model. We also utilize the sonic well logging curve to properly develop an initial reference velocity model, and use the sonic well logging data as the prior information for the inversion part, which can restrict the problem of non-uniqueness. The results of the numerical experiment of traveltime in multi-layer media showed that the hybrid eikonal solver was more accurate than the finite difference method. The case study of an oil field in eastern China demonstrated that our method can derive a high-resolution reconstruction of the subsurface structure by inverting the primary traveltime datasets. These results suggest that even though the eikonal equation is a high frequency approximation to the wavefield, the hybrid eikonal solver can provide an accurate traveltime field in the forward modelling step of seismic crosswell tomography, which is critical to ensure high-resolution invert imaging in a highly heterogeneous environment.

Elevated soil concentrations of antimony (Sb) and co-contaminants are frequently encountered where antimony has been mined on a large scale. For instance, the Xikuangshan antimony mine in central South China has sustained, over many centuries, dispersed and spatially variable input of toxic elements into the soil ecosystem. We utilized this unique environment to assess the impact of geochemical conditions on soil microbiology. Geochemical conditions were assessed by monitoring absolute and available fractions of toxic elements and disrupted soil properties. Soil microbiology was studied by high-throughput sequencing and statistical analysis, including principle component analysis and canonical correspondence analysis. Results show that Sb concentrations were ranged from 970 to more than 24,000 mg/kg. As concentrations were three times higher than the regional background values and ten times higher for Pb, 590 times higher for Cd and 30 times higher for Hg. About 5–10% of the total soil Sb was environmentally mobile. Microbial diversity was high, and soil properties such as pH, organic matter, iron and sulfate controlled the absolute microbial activity. We identified strong positive and negative correlations with specific bacterial taxonomic groups which show: (1) an intolerance of available fractions for all elements, e.g., Gemmatimonas, Pirellula, Spartobacteria; (2) a good tolerance of available fractions for all elements, e.g., Povalibacter, Spartobacteria; and (3) a mixed response, tolerating available Sb, Hg and Cd and inhibition by As, Pb, e.g., Escherichia/Shigella and Arthrobacter, and in reverse, e.g., Gemmatimonas and Sphingomonas. The site hosts great diversity dominated by Gram-negative organisms, many with rod (bacillus) morphologies but also some filamentous forms, and a wide range of metabolic capabilities: anaerobes, e.g., Saccharibacteria, metal oxidizing, e.g., Geobacter, chemoautotrophs, e.g., Gemmata, and sulfur reducing, e.g., Desulfuromonas. The bioremediation potential of Arthrobacter and Escherichia/Shigella for Sb control is highlighted.

A comment on “For NGOs, article-processing charges sap conservation funds” by Wood et al.

Our indoor microbiome consists of a wide range of microbial taxa. Whilst many of these microbes are benign, some are beneficial, some harmful, yet our knowledge of the spatial heterogeneity of bacterial assemblages in our residential environment remains limited. To investigate the existence of a common core house dust bacterial microbiome we selected household vacuum dusts, collected through a citizen science approach, from homes across two bioclimatic regions (UK, Oceanic/Maritime and Greece, Mediterranean). Following the extraction of DNA from each dust sample, we targeted the bacterial 16S rRNA gene using Illumina NextSeq sequencing. PERMANOVA analysis of the microbial communities at family level grouped samples within their distinct bioclimatic region and SIMPER analysis at genus level identified the statistically significant taxa responsible for driving diversity between these groups. A “common to all” core house dust microbiome consisted of Acinetobacter, Massalia, Rubellimicrobium, Sphingomonas and Staphylococcus; genera typically associated with human occupancy and common environmental sources. Additionally, a “unique location specific” microbiome was identified, reflective of the bioclimatic region. The Greek dusts indicated a lower average diversity than the UK house dusts, with a high abundance of Rhizobiaceae in the Greek samples. Our study highlights citizen science as a powerful approach to access the indoor residential environment, at scale, and establishes the existence of a “core” house dust microbiome independent of bioclimatic region., JE acknowledges funding from the Natural Environment Research Council (Research Grant NE/T004401/1). MB and MC acknowledge research funding from Research England’s Expanding Excellence in England (E3) Fund as part of the Hub for Biotechnology in the Built Environment. KJ acknowledges funding for her PhD research programme from Northumbria University. Open access publication fees were provide by Northumbria University.

The paper presents a review of carbon management in relation to UK Higher Education Institutions (HEIs), forms part of a wider study on the ongoing reliance on fossil fuels in Scotland’s public sector with a focus on Universities and Local Government Authorities. It compares the CF (carbon footprint), emission sources, and the fossil fuel contribution to the CFs reported in 3 identified articles relating specifically to the estimation of CF for HEIs. The consumption of fossil fuels results in human induced climate change however, fossil fuels boosted the industrialization process and remains the dominant source of global energy consumption. Action in tackling climate change has led to organizations coming under increasing pressures to monitor and report their CFs. HEIs have a key role to play in reducing its reliance on fossil fuels and reducing GHG (greenhouse gas) emissions through delivery of scientific research and innovative carbon management solutions, increase in its uptake of renewable energy technologies, educating and training future leaders, and raising public awareness, in contribution to a sustainable society. This paper highlights the need for a shift of focus to reducing fossil fuel reliance in response to climate change and demonstrates how HEIs can impact GHG reductions.

Human health and wellbeing are intimately linked to the state of the environment [...]

Antimony (Sb) is a priority pollutant in many countries and regions due to its chronic toxicity and potential carcinogenicity. Elevated concentrations of Sb in the environmental originating from mining and other anthropogenic sources are of particular global concern, so the prevention and control of the source of pollution and environment remediation are urgent. It is widely accepted that indigenous microbes play an important role in Sb speciation, mobility, bioavailability, and fate in the natural environment. Especially, antimony-oxidizing bacteria can promote the release of antimony from ore deposits to the wider environment. However, it can also oxidize the more toxic antimonite [Sb(III)] to the less-toxic antimonate [Sb(V)], which is considered as a potentially environmentally friendly and efficient remediation technology for Sb pollution. Therefore, understanding its biological oxidation mechanism has great practical significance to protect environment and human health. This paper reviews studies of the isolation, identification, diversity, Sb(III) resistance mechanisms, Sb(III) oxidation characteristics and mechanism and potential application of Sb-oxidizing bacteria. The aim is to provide a theoretical basis and reference for the diversity and metabolic mechanism of Sb-oxidizing bacteria, the prevention and control of Sb pollution sources, and the application of environment treatment for Sb pollution.

Presentation held at Goldschmidt conference 2021

More than 50% of the UK coastline is situated in Scotland under legislative jurisdiction; therefore, there is a great opportunity for regionally focused economic development by the rational use of sustainable marine bio-sources. We review the importance of seaweeds in general, and more specifically, wrack brown seaweeds which are washed from the sea and accumulated in the wrack zone and their economic impact. Rules and regulations governing the harvesting of seaweed, potential sites for harvesting, along with the status of industrial application are discussed. We describe extraction and separation methods of natural products from these seaweeds along with their phytochemical profiles. Many potential applications for these derivatives exist in agriculture, energy, nutrition, biomaterials, waste treatment (composting), pharmaceuticals, cosmetics and other applications. The chemical diversity of the natural compounds present in these seaweeds is an opportunity to further investigate a range of chemical scaffolds, evaluate their biological activities, and develop them for better pharmaceutical or biotechnological applications. The key message is the significant opportunity for the development of high value products from a seaweed processing industry in Scotland, based on a sustainable resource, and locally regulated.

The gas adsorption of shale is one of the most important factors influencing shale gas accumulation and production. Different from other shale gas fields, the shale in Northwestern Hunan province with strong structural deformation has especially high portion of adsorbed gas. The adsorption abilities of shale reservoir play a significant role in the success of exploration and production of shale gas in Northwestern Hunan. Therefore, based on many experiments including field emission scanning electron microscopy, N2/CO2 adsorption, excess CH4 adsorption with constant temperature and others, this paper found that: (1) the shale pores were identified with mineral matrix pores, organic-matter pores and fracture pores, and the pores can be further classified according to their shape features and forming mechanism; (2) after analyses of the distribution of the pore size, mesoporous is the largest contributor and widely distributed, and micropores provide more contribution on surface area but limited contribution to pore volume. Meanwhile, depth has little effect on the properties of shale reservoirs; (3) based on the fractal geometry theory, surface roughness is positively correlated to microstructure irregularity, which means the effects between the gas adsorption by Van der Waals force and by multilayer or capillary condensation in single pore system are consistent during the N2 adsorption process. (4) The abilities of gas storage are apparently sensitive to the surface roughness of shale pores and nonsensitive to microstructure irregularity. Total organic carbon has strong positive correlation with the surface roughness, specific surface area, total pore volume, and Langmuir volume, which means TOC can improve the adsorption of shale reservoir in many ways. Pyrite can offer much contribution to the ability of gas adsorption.

Kumba, the largest city in the Southwest Region of Cameroon, is characterized by the prevalence of waterborne diseases due to ingestion of contaminated water. Sixty-four water samples were collected from different sources including pipe-borne (PW), surface/stream (SW) and groundwater (HDW) sources as well as the catchment area (CW) in Kumba metropolis. These water samples were analyzed for physicochemical and microbiological parameters and the results compared with international standards. The results of physiochemical parameters showed that the water samples were mildly acidic, not saline and soft. The levels of some trace elements (Al, Fe, As, Cd, Co, Cu, Fe, Mn, Pb) in some water samples were higher than permissible limits. Water Quality Index, Contamination Index (Cd) and Trace Element Toxicity Index were used to evaluate the water samples. Results showed that most of the water sources are poor and unsafe for consumption due to high concentrations of Al, Fe, Mn and Pb. Microbiological parameters revealed that 74% of the water samples are in the class of high risk to grossly polluted. Pollution associated with the catchment area was probably the main factor controlling the quality of pipe-borne water, while that of the surface and groundwater may be attributed to geogenic and anthropogenic sources including unlined pit latrines. Water sources, especially those ingested by humans in Kumba, should be properly managed including regular treatment so as to protect the health of humans and improve the quality of life.