Search

The objective of this project was to identify and develop software for an augmented reality application that runs on the US Army Integrated Visual Augmentation System (IVAS) to support a medical caregiver during tactical combat casualty care scenarios. In this augmented reality tactical combat casualty care application, human anatomy of individual soldiers obtained predeployment is superimposed on the view of an injured war fighter through the IVAS. This offers insight into the anatomy of the injured war fighter to advance treatment in austere environments.In this article, we describe various software components required for an augmented reality tactical combat casualty care tool. These include a body pose tracking system to track the patient's body pose, a virtual rendering of a human anatomy avatar, speech input to control the application and rendering techniques to visualize the virtual anatomy, and treatment information on the augmented reality display. We then implemented speech commands and visualization for four common medical scenarios including injury of a limb, a blast to the pelvis, cricothyrotomy, and a pneumothorax on the Microsoft HoloLens 1 (Microsoft, Redmond, WA).The software is designed for a forward surgical care tool on the US Army IVAS, with the intention to provide the medical caregiver with a unique ability to quickly assess affected internal anatomy. The current software components still had some limitations with respect to speech recognition reliability during noise and body pose tracking. These will likely be improved with the improved hardware of the IVAS, which is based on a modified HoloLens 2.

The objective of this project was to identify and develop software for an augmented reality application that runs on the US Army Integrated Visual Augmentation System (IVAS) to support a medical caregiver during tactical combat casualty care scenarios. In this augmented reality tactical combat casualty care application, human anatomy of individual soldiers obtained predeployment is superimposed on the view of an injured war fighter through the IVAS. This offers insight into the anatomy of the injured war fighter to advance treatment in austere environments.In this article, we describe various software components required for an augmented reality tactical combat casualty care tool. These include a body pose tracking system to track the patient's body pose, a virtual rendering of a human anatomy avatar, speech input to control the application and rendering techniques to visualize the virtual anatomy, and treatment information on the augmented reality display. We then implemented speech commands and visualization for four common medical scenarios including injury of a limb, a blast to the pelvis, cricothyrotomy, and a pneumothorax on the Microsoft HoloLens 1 (Microsoft, Redmond, WA).The software is designed for a forward surgical care tool on the US Army IVAS, with the intention to provide the medical caregiver with a unique ability to quickly assess affected internal anatomy. The current software components still had some limitations with respect to speech recognition reliability during noise and body pose tracking. These will likely be improved with the improved hardware of the IVAS, which is based on a modified HoloLens 2.

Analyte mixing and delivery to a functionalized sensor surface are important to realize several advantages associated with biosensors integrated with microfluidic channels. Here, we present a comparison between a herringbone structure (HBS) and a curved passive mixing structure of their efficiency at facilitating mixing and surface saturation using fluorescein included in one of the inlets of a Y-channel microfluidic device. We performed a large parametric study to assess the effects of varying the height of the microfluidic channel as well as the height, width, and spacing of the passive mixing structures. Scanning confocal microscopy combined with a custom-designed image-analysis procedure were utilized to visualize and quantify the observed changes in efficiency in inducing solute mixing by the different designs. The flow patterns within the channels were found to vary significantly with changes in the geometry of the passive mixing structures, which in turn affected the efficiency of the channel at mixing the fluid and saturating the surface opposite the mixing structures. The solute mixing as a function of the channel length was also determined; an initial slow mixing rate does not always coincide with a low mixing index (MI). We found that the range of MIs for the curved mixing structure 1 cm downstream from the inlet was 0.85–0.99 whilst for our HBS it was 0.74–0.98, depending on the design parameters of the passive mixing structures. Overall, this study shows that the curved passive mixing structure family is more robust in inducing efficient mixing than the HBSs.

We present a method for 3D sub-nanometer displacement measurement using a set of differential optical shadow sensor. It is based on using pairs of collimated beams on opposite sides of an object that are partially blocked by it. Applied to a sphere, our 3-axis sensor module consists of 8 parallel beam-detector sets for redundancy. The sphere blocks half of each beam power in the nominal centered position, and any displacement can be measured by the differential optical power changes amongst the pairs of detectors. We have experimentally demonstrated a displacement sensitivity of 0.87 nm/rtHz at 1 Hz and 0.39 nm/rtHz at 10 Hz. We describe the application of the module to the inertial sensors of a drag-free satellite, which can potentially be used for navigation, geodesy and fundamental science experiments as well as ground based applications.

Data from a satellite mission will show that compact, low-power AlGaN Ultraviolet LEDs operating at 255 nm are effective for precise control of the potential of an electrically isolated proof mass with applications in gravitational reference sensors.