Search

Articular cartilage injuries are a common source of joint pain and dysfunction. We hypothesized that pulsed electromagnetic fields (PEMFs) would improve growth and healing of tissue-engineered cartilage grafts in a direction-dependent manner. PEMF stimulation of engineered cartilage constructs was first evaluated in vitro using passaged adult canine chondrocytes embedded in an agarose hydrogel scaffold. PEMF coils oriented parallel to the articular surface induced superior repair stiffness compared to both perpendicular PEMF (p = .026) and control (p = .012). This was correlated with increased glycosaminoglycan deposition in both parallel and perpendicular PEMF orientations compared to control (p = .010 and .028, respectively). Following in vitro optimization, the potential clinical translation of PEMF was evaluated in a preliminary in vivo preclinical adult canine model. Engineered osteochondral constructs (∅ 6 mm × 6 mm thick, devitalized bone base) were cultured to maturity and implanted into focal defects created in the stifle (knee) joint. To assess expedited early repair, animals were assessed after a 3-month recovery period, with microfracture repairs serving as an additional clinical control. In vivo, PEMF led to a greater likelihood of normal chondrocyte (odds ratio [OR]: 2.5, p = .051) and proteoglycan (OR: 5.0, p = .013) histological scores in engineered constructs. Interestingly, engineered constructs outperformed microfracture in clinical scoring, regardless of PEMF treatment (p < .05). Overall, the studies provided evidence that PEMF stimulation enhanced engineered cartilage growth and repair, demonstrating a potential low-cost, low-risk, noninvasive treatment modality for expediting early cartilage repair.

Articular cartilage defects are a common source of joint pain and dysfunction. We hypothesized that sustained low-dose dexamethasone (DEX) delivery via an acellular osteochondral implant would have a dual pro-anabolic and anti-catabolic effect, both supporting the functional integrity of adjacent graft and host tissue while also attenuating inflammation caused by iatrogenic injury. An acellular agarose hydrogel carrier with embedded DEX-loaded poly(lactic-co-glycolic) acid (PLGA) microspheres (DLMS) was developed to provide sustained release for at least 99 days. The DLMS implant was first evaluated in an in vitro pro-inflammatory model of cartilage degradation. The implant was chondroprotective, as indicated by maintenance of Young's modulus (EY) (p = 0.92) and GAG content (p = 1.0) in the presence of interleukin-1β insult. In a subsequent preliminary in vivo experiment, an osteochondral autograft transfer was performed using a pre-clinical canine model. DLMS implants were press-fit into the autograft donor site and compared to intra-articular DEX injection (INJ) or no DEX (CTL). Functional scores for DLMS animals returned to baseline (p = 0.39), whereas CTL and INJ remained significantly worse at 6 months (p Statement of significance Articular cartilage defects are a common source of joint pain and dysfunction. Effective treatment of these injuries may prevent the progression of osteoarthritis and reduce the need for total joint replacement. Dexamethasone, a potent glucocorticoid with concomitant anti-catabolic and pro-anabolic effects on cartilage, may serve as an adjuvant for a variety of repair strategies. Utilizing a dexamethasone-loaded osteochondral implant with controlled release characteristics, we demonstrated in vitro chondroprotection in the presence of IL-1-induced degradation and improved in vivo functional outcomes following osteochondral repair. These improved outcomes were correlated with superior histological cartilage scores and minimal-to-no comorbidity, which is a risk with high dose dexamethasone injections. Using this model of cartilage restoration, we have for the first time shown the application of targeted, low-dose dexamethasone for improved healing in a preclinical model of focal defect repair.

Animal cells have served as highly controllable model systems for furthering cartilage tissue engineering practices in pursuit of treating osteoarthritis. Although successful strategies for animal cells must ultimately be adapted to human cells to be clinically relevant, human chondrocytes are rarely employed in such studies. In this study, we evaluated the applicability of culture techniques established for juvenile bovine and adult canine chondrocytes to human chondrocytes obtained from fresh or expired osteochondral allografts. Human chondrocytes were expanded and encapsulated in 2% agarose scaffolds measuring Ø3–4 mm × 2.3 mm, with cell seeding densities ranging from 15 to 90 × 106 cells/mL. Subsets of constructs were subjected to transient or sustained TGF-β treatment, or provided channels to enhance nutrient transport. Human cartilaginous constructs physically resembled native human cartilage, and reached compressive Young’s moduli of up to ~250 kPa (corresponding to the low end of ranges reported for native knee cartilage), dynamic moduli of ~950 kPa (0.01 Hz), and contained 5.7 percent wet weight (%/ww) of glycosaminoglycans (≥ native levels) and 1.5 %/ww collagen. We found that the initial seeding density had pronounced effects on tissue outcomes, with high cell seeding densities significantly increasing nearly all measured properties. Transient TGF-β treatment was ineffective for adult human cells, and tissue construct properties plateaued or declined beyond 28 days of culture. Finally, nutrient channels improved construct mechanical properties, presumably due to enhanced rates of mass transport. These results demonstrate that our previously established culture system can be successfully translated to human chondrocytes.

Osteochondral allograft implantation is an effective cartilage restoration technique for large defects (>10 cm(2)), though the demand far exceeds the supply of available quality donor tissue. Large bilayered engineered cartilage tissue constructs with accurate anatomical features (i.e. contours, thickness, architecture) could be beneficial in replacing damaged tissue. When creating these osteochondral constructs, however, it is pertinent to maintain biofidelity to restore functionality. Here, we describe a step-by-step framework for the fabrication of a large osteochondral construct with correct anatomical architecture and topology through a combination of high-resolution imaging, rapid prototyping, impression molding, and injection molding.

Tissue-engineering techniques have been successful in developing cartilage-like tissues in vitro using cells from animal sources. The successful translation of these strategies to the clinic will likely require cell expansion to achieve sufficient cell numbers. Using a two-dimensional (2D) cell migration assay to first identify the passage at which chondrocytes exhibited their greatest chondrogenic potential, the objective of this study was to determine a more optimal culture medium for developing three-dimensional (3D) cartilage-like tissues using human cells. We evaluated combinations of commonly used growth factors that have been shown to promote chondrogenic growth and development. Human articular chondrocytes (AC) from osteoarthritic (OA) joints were cultured in 3D environments, either in pellets or encapsulated in agarose. The effect of growth factor supplementation was dependent on the environment, such that matrix deposition differed between the two culture systems. ACs in pellet culture were more responsive to bone morphogenetic protein (BMP2) alone or combinations containing BMP2 (i.e. BMP2 with PDGF or FGF). However, engineered cartilage development within agarose was better for constructs cultured with TGFβ3. These results with agarose and pellet culture studies set the stage for the development of conditions appropriate for culturing 3D functional engineered cartilage for eventual use in human therapies. Copyright © 2015 John Wiley & Sons, Ltd.

Fibroblast-like synoviocytes (FLS) reside in the synovial membrane of diarthrodial joints and are exposed to a dynamic fluid environment that presents both physical and chemical stimuli. The ability of FLS to sense and respond to these stimuli plays a key role in their normal function, and is implicated in the alterations to function that occur in osteoarthritis (OA). The present work characterizes the response of FLS to fluid flow-induced shear stress via real-time calcium imaging, and tests the hypothesis that this response is modulated by interleukin-1α (IL-1α), a cytokine elevated in OA. FLS demonstrated a robust calcium signaling response to fluid shear that was dose dependent upon stress level and required both external and internal calcium sources. Preconditioning with 10 ng/mL IL-1α for 24 hrs heightened this shear stress response by significantly increasing the percent of responding cells and peak magnitude, while significantly decreasing the time for a peak to occur. Intercellular communication via gap junctions was found to account for a portion of the FLS population response in normal conditions, and was significantly increased by IL-1α preconditioning. IL-1α was also found to significantly increase average length and incidence of the primary cilia, an organelle commonly implicated in shear mechanosensing. These findings suggest that the elevated levels of IL-1α found in the OA environment heighten FLS sensitivity to fluid shear by altering both intercellular communication and individual cell sensitivity, which could affect downstream functions and contribute to progression of the disease state.

Osteoarthritis, the most prevalent form of joint disease, afflicts 9% of the U.S. population over the age of 30 and costs the economy nearly $100 billion annually in healthcare and socioeconomic costs. It is characterized by joint pain and dysfunction, though the pathophysiology remains largely unknown. Due to its avascular nature and limited cellularity, articular cartilage exhibits a poor intrinsic healing response following injury. As such, significant research efforts are aimed at producing engineered cartilage as a cell-based approach for articular cartilage repair. However, the knee joint is mechanically demanding, and during injury, also a milieu of harsh inflammatory agents. The unforgiving mechano-chemical environment requires tissue replacements that are capable of bearing such burdens. The use of mesenchymal stem cells (MSCs) for cartilage tissue engineering has emerged as a promising cell source due to their ease of isolation, capacity to readily expand in culture, and ability to undergo lineage-specific differentiation into chondrocytes. However, to date, very few studies utilizing MSCs have successfully recapitulated the structural and functional properties of native cartilage, exposing the difficult process of uniformly differentiating stem cells into desired cell fates and maintaining the phenotype during in vitro culture and after in vivo implantation. To address these shortcomings, here, we present a concise review on modulating stem cell behavior, tissue development and function using well-developed techniques from chondrocyte-based cartilage tissue engineering.

Soluble factors released from chondrocytes can both enhance and induce chondrocyte-like behavior in cocultured dedifferentiated cells. The ability to similarly prime and modulate biosynthetic activity of differentiated cells encapsulated in a three-dimensional environment is unknown.To understand the effect of coculture on engineered cartilage, we posed three hypotheses: (1) coculturing with a monolayer of chondrocytes ("chondrocyte feeder layer") expedites and increases engineered tissue growth; (2) expedited growth arises from paracrine effects; and (3) these effects are dependent on the specific morphology and expression of the two-dimensional feeder cells.In three separate studies, chondrocyte-laden hydrogels were cocultured with chondrocyte feeder layers. Mechanical properties and biochemical content were quantified to evaluate tissue properties. Histology and immunohistochemistry stains were observed to visualize each constituent's distribution and organization.Coculture with a chondrocyte feeder layer led to stiffer tissue constructs (Young's modulus and dynamic modulus) with greater amounts of glycosaminoglycan and collagen. This was dependent on paracrine signaling between the two populations of cells and was directly modulated by the rounded morphology and expression of the feeder cell monolayer.These findings suggest a potential need to prime and modulate tissues before implantation and present novel strategies for enhancing medium formulations using soluble factors released by feeder cells.Determining the soluble factors present in the coculture system can enhance a chondrogenic medium formulation for improved growth of cartilage substitutes. The feeder layer strategy described here may also be used to prime donor cartilage allografts before implantation to increase their success in vivo.

Strategies for cartilage tissue engineering and repair have recently focused on cell sources from the surrounding joint tissue as an alternative to chondrocytes. Synovium-derived stem cells (SDSCs) are found in the intimal layer of the synovium, the thin overlying capsule surrounding the joint space [1] and have been found to exhibit a greater chondrogenic potential than stem cells from other origins such as bone marrow stem cells or adipose derived stem cells [2–4]. Under directed cues, these cells have been shown to be capable of migrating from the synovium membrane into articular cartilage defects, though the mechanism behind such movement is unclear. As a first step, we have previously shown that SDSCs expanded in 2D monolayer culture in a growth factor cocktail of TGF-β1, FGF, and PDGF-ββ exhibit directed cathodal migration with perpendicular alignment when under the influence of an applied DC electric field [5]. As cellular behavior and response to an external stimulus can change with exposure to growth factors and passage number, we look here to characterize the effects of passaging on the migration response of SDSCs to an applied electric field. We hypothesize that if these cells develop more chondrocyte-like characteristics with growth factor passaging, their response will mimic that which has previously been reported for chondrocytes, notably directed cathodal (negative pole) migration and perpendicular realignment of the long axis to the direction of applied field [6].Copyright © 2011 by ASME

Replacement of diseased areas of the joint with tissue-engineered osteochondral grafts has shown potential in the treatment of osteoarthritis. Bioactive glasses are candidates for the osseous analog of these grafts.(1) Does Bioactive Glass 13-93 (BG 13-93) as a subchondral substrate improve collagen and glycosaminoglycan production in a tissue-engineered cartilage layer? (2) Does BG 13-93 as a culture medium supplement increase the collagen and glycosaminoglycan production and improve the mechanical properties in a tissue-engineered cartilage layer?In Study 1, bioactive glass samples (n = 4) were attached to a chondrocyte-seeded agarose layer to form an osteochondral construct, cultured for 6 weeks, and compared to controls. In Study 2, bioactive glass samples (n = 5) were cocultured with cell-seeded agarose for 6 weeks. The cell-seeded agarose layer was exposed to BG 13-93 either continuously or for the first or last 2 weeks in culture or had no exposure.Osteochondral constructs with a BG 13-93 base had improved glycosaminoglycan deposition but less collagen II content. Agarose scaffolds that had a temporal exposure to BG 13-93 within the culture medium had improved mechanical and biochemical properties compared to continuous or no exposure.When used as a subchondral substrate, BG 13-93 did not improve biochemical properties compared to controls. However, as a culture medium supplement, BG 13-93 improved the biochemical and mechanical properties of a tissue-engineered cartilage layer.BG 13-93 may not be suitable in osteochondral constructs but could have potential as a medium supplement for neocartilage formation.

Articular cartilage is the specialized connective tissue that covers diarthrodial joints (e.g., hip, knee, and shoulder) and serves a load-bearing and lubrication function. As the tissue is avascular, it exhibits a poor healing capacity when injured. Joint arthroplasty, comprised of metal and plastic prostheses, has a limited lifespan after implantation and are ideally reserved for cases of significant traumatic injury and pervasive arthritis. As such, there have been significant efforts to develop cell-based strategies for cartilage repair. Accordingly, there is great anticipation regarding the role that stem cells can serve as a cell source for generating functional articular cartilage grafts. There is a need for both the use of animal cells and models as well as parallel development using human cells to successfully translate these strategies to the clinic.

Engineered cartilage comprised of chondrocytes encapsulated in agarose gel is capable of attaining a Young’s modulus and glycosaminoglycan (GAG) content comparable to native tissue within 8 weeks of culture [1]. Expediting this growth, especially early in culture when pericellular matrices are first forming, may be critical to optimizing functional properties of the tissue as well as increasing their impact and use in cartilage repair strategies. Recently, we have been exploring the concept of a feeder layer, typically associated with culturing embryonic stem cells, for tissue engineering of cartilage.Copyright © 2010 by ASME

The clinical potential of stem cells has driven forward efforts toward their optimization for tissue engineering applications. The intimal layer of the synovium is composed of two cell types, macrophages and fibroblast-like cells. The fibroblast-like cells, often referred to as synovial-derived mesenchymal stem cells (sMSCs), have the capability to differentiate down a chondrogenic lineage1. In addition, in vivo tests have shown that synovial cells may be recruited from the synovial membrane to aid in the repair of articular cartilage defects2.Copyright © 2010 by ASME

Summary Injury to articular cartilage leads to degenerative changes resulting in a loss of mechanical and biochemical properties. In engineered cartilage, the injury response of developing constructs is unclear. Objective To characterize the cellular response of tissue-engineered constructs cultured in chemically-defined medium after mechanical insult, either by compression-induced cracking, or by cutting, as a function of construct maturity. Methods Primary immature bovine articular chondrocytes (4–6 weeks) were encapsulated in agarose hydrogel (2%, 30 millioncells/mL) and cultured in chemically-defined medium supplemented with Transforming growth factor (TGF)-β3 (10ng/mL, first 2 weeks). At early (5 days) and late (35 days) times in culture, subsets of constructs were exposed to mechanical overload to produce a crack in the tissue or were exposed to a sharp wound with a perpendicular cut. Constructs were returned to culture and allowed to recover in static conditions. Mechanical and biochemical properties were evaluated at 2-week intervals to day 70, and cellular viability was assessed at 2-week intervals to day 85. Results Constructs injured early in culture recovered their mechanical stiffness back to control values, regardless of the mode of injury. Later in culture, when constructs exhibited properties similar to those of native cartilage, compression-induced cracking catastrophically damaged the bulk matrix of the tissue and resulted in permanent mechanical failure with persistent cell death. No such detrimental outcomes were observed with cutting. Biochemical content was similar across all groups irrespective of mode or time of injury. Conclusions Unlike native cartilage, engineered cartilage constructs exhibit a reparative capacity when the bulk integrity of the developing tissue is preserved after injury.

Regenerative strategies for engineering cartilage have recently shown promise, as they have been capable of producing tissues comparable in Young’s modulus and glycosaminoglycan (GAG) content to native cartilage [1]. The response of engineered cartilage, when implanted, relies on its ability to withstand the harsh chemical and mechanical environment of the implantation site. Mechanical stimuli, in particular, have been identified as important regulators of chondrocyte function and can induce inflammatory responses or the release of proteoglycans from cartilage explants [2–4]. The downstream effects of these responses can induce chondrocyte death as soon as a few hours after and up to 7 days post injury [5]. In cartilage explants, injury to the tissue can produce structural damage and osteoarthritic-like changes including a loss of mechanical properties, increased collagen degradation, and reduced proteoglycan synthesis [2,6]. Injurious loads have been identified as one potential mechanism leading to apoptosis and necrosis [8].Copyright © 2009 by ASME

Osteoarthritis (OA) is a common and painful disorder characterized by the degeneration of the articular surfaces of diarthrodial joints. One of the most promising approaches to treat OA is the design of engineered tissue that reproduces the functional properties of healthy cartilage. This tissue engineering approach typically entails the use of living cells embedded in a three-dimensional scaffold that is cultured over time in a growth medium supplemented with various physical or biological stimulants to encourage development. Recently our laboratory has been able to cultivate engineered cartilage with an equilibrium modulus (EY) and an glycosaminoglycan (GAG) content that match the native tissue using the temporal application of growth factors over a six-week culture period1. While these findings are encouraging, the dynamic modulus (G*) and the collagen content for these constructs amount to less than a quarter of those of native articular cartilage. Of the two mechanical measurements, G*, which is correlated with the collagen content, is considered to be the more physiologically relevant as it measures the behavior of the tissue during the application of cyclic loads and better captures fluid pressurization within the biphasic tissue. No group has currently been able to reproduce native values of collagen regardless of the tissue engineering strategy employed. Obtaining native values of G* and collagen therefore remains an important but elusive challenge. Cross-linking agents such as glutaraldehyde, formaldehyde, or epoxy are typically used to chemically-treat (or fix) devitalized xenografts and allografts to reduce the immune rejection or the enzymatic degradation that is typical of transplanted bioprostheses2,3. Typically, however, cross-linking agents are lethal to cells. The use of genipin, a naturally occurring crosslinker with toxicity levels ten thousand fold less than glutaraldehyde4 as a biocompatible and stable cross-linker has been established by other groups5,6 and provides a promising new avenue to explore for tissue-engineering. Genipin cross-linking works by forming intra- and intermolecular cross-links of the amino residues on tropocollagen or proteoglycan molecules. A modified cyclic form of genipin can reside stably within the extracellular network, adding bridges across adjacent fibers. As such, previous groups have explored the use of genipin as a onetime treatment to fix tissue prior to implantation7, for the assembly of tissue-engineering scaffolds prior to cell seeding8,9, or in order to modulate the release of growth factors from degradable scaffolds or beads5. Genipin has also been studied for its anti-inflammatory effects, either administered directly to different cell lines10,11, or administered orally to animals12,13. Moreover, genipin cross-linking has been shown to affect the mechanical properties of biological tissues, increasing the tensile strength of bovine pericardium14, porcine tendon15, and type I collagen gels16. Our laboratory uses agarose hydrogel as a scaffold system for cartilage tissue engineering. This gel has been used extensively in chondrocyte biology studies and has shown some promise for tissue engineering applications. Agarose is a neutrally charged polysaccharide and as such is unaffected by genipin. However the chondrocytes embedded in the gel elaborate an extracellular matrix over time in culture that exhibits amine groups, which are subject to genipin cross-linking. In this set of studies we propose a novel use for genipin: not as a scaffold cross-linker, but as a medium supplement to promote cross-linking of de novo cell products as they are produced. We hypothesize that the application of genipin will stabilize the extracellular matrix components and increase the mechanical properties of developing cartilaginous tissue in our agarose hydrogels. We hypothesize two mechanisms through which the physical enhancement of tissue properties is fostered: (1) by reorganization and enhanced retention of cell synthesized extracellular matrix components, and (2) through reduction of the loss of extracellular matrix components by increasing their resilience to catabolic degradation.

Unlike native cartilage explants that are used in autologous tissue transfer procedures, engineered cartilage constructs are typically highly fragile when first formed and must rely on cellular activity to develop over time. However, inflammatory cytokines such as interleukin-1alpha (IL-1alpha) are often present in target joints and may interfere with this development process. Herein we examine to what extent nascent engineered tissue is susceptible to chemical perturbations by IL-1alpha (10 ng/mL), especially when compared to native explants, and whether in vitro preconditioning may promote sufficient integrity to lessen this impact. The studies were carried out using a chemically defined medium supplemented with or without the antiinflammatory steroid dexamethasone. We find that engineered tissue (bovine chondrocytes in agarose hydrogel) at early time points (days 0 and 14) does not grow when exposed to the cytokine even temporarily, but both bovine explants and more developed engineered tissue (day 28) are able to withstand the same exposure without degradation of properties. We argue therefore that some in vitro preconditioning may be necessary to promote both sufficient mechanical integrity and the chemical fortitude without which insufficiently developed engineered constructs will not survive the harsh mechanochemical environment within the joint.

Tissue-engineering has great potential for treating cartilage pathologies such as osteoarthritis by replacing degraded tissue with newly developed engineered tissue. However proinflammatory cytokines such as interleukin-1α (IL-1α) are a confounding issue as they are often present in high concentrations as part of the chronic pathology or as a result of the surgical intervention itself(1). The catabolic effects of these mediators may be especially pronounced in engineered tissues whose cells are not yet fully embedded in the potentially chondroprotective enclosure of a cartilaginous extracellular matrix(2). One method to protecting initially fragile constructs from degradation may be through the use of non-toxic cross-linking agents. Genipin is a naturally occurring crosslinking agent that reacts with amino acids or amine groups and leads to the formation of stable crosslinked products that are identifiable by a dark blue pigment (Figure 1). Cartilage cross-linked with genipin has been shown to be more resistant to collagenase digestion(3) and to injection of chondroitinase-ABC(4). In this study, we examined whether engineered constructs pre-treated with genipin would better resist IL-1α induced catabolic degradation.Copyright © 2008 by ASME

An interplay of mechanical and chemical factors is integral to cartilage maintenance and/or degeneration. Interleukin-1 (IL-1) is a pro-inflammatory cytokine that is present at elevated concentrations in osteoarthritic joints and initiates the rapid degradation of cartilage when cultured in vitro. Several short-term studies have suggested that applied dynamic deformational loading may have a protective effect against the catabolic actions of IL-1. In the current study, we examine whether the long-term (42 days) application of dynamic deformational loading on chondrocyte-seeded agarose constructs can mitigate these catabolic effects. Three studies were carried out using two IL-1 isoforms (IL-1alpha and IL-1beta) in chemically defined medium supplemented with a broad range of cytokine concentrations and durations. Physiologic loading was unable to counteract the long-term catabolic effects of IL-1 under any of the conditions tested, and in some cases led to further degeneration over unloaded controls.

Electrospun fibrous scaffolds are being developed for the engineering of numerous tissues. Advantages of electrospun scaffolds include the similarity in fiber diameter to elements of the native extracellular matrix and the ability to align fibers within the scaffold to control and direct cellular interactions and matrix deposition. To further expand the range of properties available in fibrous scaffolds, we developed a process to electrospin photocrosslinkable macromers from a library of multifunctional poly(beta-amino ester)s. In this study, we utilized one macromer (A6) from this library for initial examination of fibrous scaffold formation. A carrier polymer [poly(ethylene oxide) (PEO)] was used for fiber formation because of limitations in electrospinning A6 alone. Various ratios of A6 and PEO were successfully electrospun and influenced the scaffold fiber diameter and appearance. When electrospun with a photoinitiator and exposed to light, the macromers crosslinked rapidly to high double bond conversions and fibrous scaffolds displayed higher elastic moduli compared to uncrosslinked scaffolds. When these fibers were deposited onto a rotating mandrel and crosslinked, organized fibrous scaffolds were obtained, which possessed higher moduli (approximately 4-fold) in the fiber direction than perpendicular to the fiber direction, as well as higher moduli (approximately 12-fold) than that of nonaligned crosslinked scaffolds. With exposure to water, a significant mass loss and a decrease in mechanical properties were observed, correlating to a rapid initial loss of PEO which reached an equilibrium after 7 days. Overall, these results present a process that allows for formation of fibrous scaffolds from a wide variety of possible photocrosslinkable macromers, increasing the diversity and range of properties achievable in fibrous scaffolds for tissue regeneration.

Fiber-reinforced tissues of the musculoskeletal system, including tendon, ligament, intervertebral disc, and the knee meniscus function to transmit the high mechanical forces that arise with locomotion. As these tissues operate under demanding mechanical regimes, their structure and composition are optimized to enable these activities and to resist damage with repeated use. Hallmarks of these dense fibrous tissues include a high collagen content organized along a prevailing fiber direction that is generally coincident with the principal loading direction, as well as a lack of vascularity after skeletal maturation. While these characteristics enable function, they also predispose these tissues to a poor healing response subsequent to injury.Copyright © 2007 by ASME

Summary Objective Galvanotaxis, the migratory response of cells in response to electrical stimulation, has been implicated in development and wound healing. The use of mesenchymal stem cells (MSCs) from the synovium (synovium-derived stem cells, SDSCs) has been investigated for repair strategies. Expansion of SDSCs is necessary to achieve clinically relevant cell numbers; however, the effects of culture passage on their subsequent cartilaginous extracellular matrix production are not well understood. Methods Over four passages of SDSCs, we measured the expression of cell surface markers (CD31, CD34, CD49c, CD73) and assessed their migratory potential in response to applied direct current (DC) electric field. Cells from each passage were also used to form micropellets to assess the degree of cartilage-like tissue formation. Results Expression of CD31, CD34, and CD49c remained constant throughout cell expansion; CD73 showed a transient increase through the first two passages. Correspondingly, we observed that early passage SDSCs exhibit anodal migration when subjected to applied DC electric field strength of 6 V/cm. By passage 3, CD73 expression significantly decreased; these cells exhibited cell migration toward the cathode, as previously observed for terminally differentiated chondrocytes. Only late passage cells (P4) were capable of developing cartilage-like tissue in micropellet culture. Conclusions Our results show cell priming protocols carried out for four passages selectively differentiate stem cells to behave like chondrocytes, both in their motility response to applied electric field and their production of cartilaginous tissue.

Background During osteoarthritis and following surgical procedures, the environment of the knee is rich in proinflammatory cytokines such as IL-1. Introduction of tissue-engineered cartilage constructs to a chemically harsh milieu may limit the functionality of the implanted tissue over long periods. A chemical preconditioning scheme (application of low doses of IL-1) was tested as a method to prepare developing engineered tissue to withstand exposure to a higher concentration of the cytokine, known to elicit proteolysis as well as rapid degeneration of cartilage. Methods Using an established juvenile bovine model system, engineered cartilage was preconditioned with low doses of IL-1α (0.1 ng/mL, 0.5 ng/mL, and 1.0 ng/mL) for 7 days before exposure to an insult dose (10 ng/mL). The time frame over which this protection is afforded was investigated by altering the amount of time between preconditioning and insult as well as the time following insult. To explore a potential mechanism for this protection, one set of constructs was preconditioned with CoCl2, a chemical inducer of hypoxia, before exposure to the IL-1α insult. Finally, we examined the translation of this preconditioning method to extend to clinically relevant adult, passaged chondrocytes from a preclinical canine model. Results Low doses of IL-1α (0.1 ng/mL and 0.5 ng/mL) protected against subsequent catabolic degradation by cytokine insult, preserving mechanical stiffness and biochemical composition. Regardless of amount of time between preconditioning scheme and insult, protection was afforded. In a similar manner, preconditioning with CoCl2 similarly allowed for mediation of catabolic damage by IL-1α. The effects of preconditioning on clinically relevant adult, passaged chondrocytes from a preclinical canine model followed the same trends with low-dose IL-1β offering variable protection against insult. Conclusions Chemical preconditioning schemes have the ability to protect engineered cartilage constructs from IL-1-induced catabolic degradation, offering potential modalities for therapeutic treatments.