Search

The eight-chain RF system and radio frequency quadrupole (RFQ) linac were successfully integrated at the facility of the Linear IFMIF Prototype Accelerator (LIPAc). We achieved an unprecedented high current deuteron beam up to 55 mA in pulse operation ( $300~\mu \text{s}$ , 1 Hz). The keys of the success were (1) understanding reflected power from RFQ to RF system, (2) tuning each RF chain individually, (3) intensive RF conditioning for holding the stable RF power in the RFQ, and (4) optimizing the beam loading compensation control. Interestingly, the reflection at the breakdown in RF conditioning was higher than an estimation and reached up to 600 kW so far. In order to avoid damage on tetrodes by the high reflection, the impedance of each circulator was accurately adjusted.

International audience; LIPAc is the Linear IFMIF Prototype Accelerator developed within the framework of the IFMIF project under the Broader Approach (BA) agreement signed between EURATOM and the Japanese Government in 2007. The IFMIF accelerator aims to provide an accelerator-based D-Li neutron source to produce high intensity neutron fluxes with appropriate energy spectrum in order to characterize materials envisioned for future fusion reactors. Because the IFMIF accelerator has to reach unprecedented performances, the feasibility is being tested through the design, manufacturing, installation, commissioning and testing activities of a 1:1-scale prototype accelerator, namely LIPAc, from the injector to the first cryomodule together with the High Energy Beam Transport line and the High Power Beam Dump. After outstanding results obtained in 2019, the LIPAc project has entered 2020 in the preparation of the third commissioning stage, i.e., validation in continuous-wave mode of the complete accelerator up to 5 MeV with its final beam dump. The validation until the nominal energy of 9 MeV will be made after the completion of cryomodule assembly. After a brief overview of the goals already achieved in the framework of the IFMIF/EVEDA program, this paper will present a synthesis of the results that have been obtained so far with the LIPAc accelerator as well as the future developments planned beyond 2020.

The Radio Frequency Quadrupole (RFQ) linac and 1.6 MW RF power system of the Linear IFMIF Prototype Accelerator (LIPAc) facility in the International Fusion Energy Research Center (IFERC) in Rokkasho (Japan) has been installed and conditioned. During the assembly and tuning process, the RFQ cavity was protected with a temporary tent from the potential deterioration of performance caused by dust. The vacuum in the cavity was improved through the 100 °C baking process of the cavity. The high power test of the 175 MHz RF systems up to 200 kW in CW for each of the eight RF chains was performed for checking its stable output reproducibility in Japan, before connecting 9–3/16 inch coaxial transmission lines from the RF chains to the RF input couplers of the cavity. It was confirmed that the eight RF chains provided the balanced RF power to the single RFQ cavity in-phase using a feedback loop and a synchronization system. The peak power in the cavity achieved 150 kW in the pulsed mode, which corresponds approximately to the required electric field to accelerate proton beam. Such RF conditioning process is ongoing to achieve 600 kW approximately required for deuteron beam commissioning planned in 2018.

The validation of the Linear IFMIF Prototype Accelerator (LIPAc) is being conducted in Rokkasho Fusion Institute of QST, Aomori, Japan. The beam commissioning of the novel LIPAc RFQ has been progressing significantly, and the acceleration of the world highest current deuteron beam of 125 mA to 5 MeV (1 ms, 1 Hz pulsed beam) was achieved for the 1st time in July 2019. This study is devoted to evaluating the amount of beam loss during the high current acceleration phase by measuring the neutron produced by the interaction of the beam with accelerator components so as to verify the accelerator design. The foil activation method and the 3He neutron probes were utilized. It turned out that there was no significant trace of unexpected beam loss at the high energy section of the RFQ and the Medium Energy Beam Transport (MEBT) section.The measurement using the 3He neutron probes provided an evidence that the beam loss was well controlled in the RFQ cavity as designed. This study concludes that the LIPAc RFQ as well as MEBT is working well as predicted by the design calculation, and its concept is successful.

A Radio Frequency Quadrupole Cooler (RFQC) prototype was adapted for insertion into a high uniformity magnetic field, with Bz up to 0.2 T, to improve radial confinement. While the RFQC purpose is to reduce (by gas collisions) the energy spread and emittance of a beam of radioactive nuclei, to finely select ion mass in nuclear physics, the prototype is tested in a setup including a stable ion source, a pepper pot emittance meter, and two Faraday cups; this makes a precise characterization of the RFQC feasible. The ion extraction was studied in detail by simulations, both to match it to the emittance meter granularity and to verify the effect of the typical nonuniformity of the longitudinal electric field Ez inside the RFQC; an average motion description (including friction force from gas collisions) was used, introducing the ballistic and diffusive regimes. With a preliminary optimization of the electrode shape, buffer gas pressure pg, and radio frequency voltage, the ion beam can be extracted with a significant cooling margin.

At Legnaro National Laboratories of INFN is under construction a Rare Isotope Facility called "Selective Production of Exotic Species" (SPES) based on a 35-70 MeV proton cyclotron, able to deliver two beams with a total current up to 0.75 mA, an ISOL fission target station and an existing ALPI superconducting accelerator as a post accelerator (up to 10 MeV/u for A/q=7). The paper will cover notably: the high-resolution mass separator, the CW RFQ (80 MHz, 727 keV/u, with internal bunching), the 1+ low energy transfer line and the injection line from Charge Breeder to ALPI under installation., Proceedings of the 14th Int. Conf. on Heavy Ion Accelerator Technology, HIAT2018, Lanzhou, China

Worldwide efforts to tackle the nature of exotic nuclei comprise the construction of new-generation Radioactive Ion Beam facilities. The Italian community is deeply involved in the process and the construction of SPES at Legnaro National Laboratories (INFN) is progressing. This contribution describes the layout of SPES in all its flavours, from Nuclear Physics to Applications in Nuclear Medicine and Neutron Physics. In particular, the status of the SPES-β ISOL facility, together with some of the relevant physics cases and the associated equipment are described.

For the development of the International Fusion Materials Irradiation Facility (IFMIF) aiming at material tests for fusion power plants, the construction of the Linear IFMIF Prototype Accelerator (LIPAc) has been conducted at Rokkasho, Japan under the Broader Approach Agreement. The commissioning of LIPAc has been progressing significantly. The world most powerful RFQ successfully accelerated proton beam of 58 mA, and an important project milestone of the acceleration of deuteron beam to 5 MeV with the beam current of 125 mA in pulse mode was successfully achieved. The result proves the validity of the present RFQ design. The adjustment and tuning of the RF power system and the injector for enabling an operation at maximum performances played an important role in achieving this result. For the next step, the preparation of the high duty cycle operation of RFQ is underway. The installation of the HEBT (High Energy Beam Transport line) and the beam dump accepting 1 MW, CW beam, has been completed and a new beam transport line is under manufacturing. Also the assembly of the Superconducting RF (SRF) linac to accelerate the beam up to 9 MeV started in a clean room in Rokkasho.

The IFMIF project aiming at material tests for a future fusion DEMO reactor is under the EVEDA phase in the BA Agreement of fusion program between Japan and EU. As the accelerator activity, the installation and commissioning of the Linear IFMIF Prototype Accelerator (LIPAc) is at the second stage of demonstration of the feasibility of the low energy section of an IFMIF deuteron accelerator up to 9 MeV with a beam current of 125 mA, CW. The installation of injector, RFQ, MEBT, D-Plate and LPBD for LIPAc with 8 coaxial high-power transmission lines and RF power system was just done in 2017 at Rokkasho, Japan. After that, the RF conditioning of RFQ for beam commissioning is underway. The beam commissioning of RFQ with H+/D+ and the acceleration demonstration up to 5MeV-125mA-0.1% duty cycle with D+ will be done.

The Selective Production of Exotic Species (SPES) project is presently under development at INFN-LNL: aim of this project is the production, ionization and post-acceleration of radioactive ions to perform forefront research in nuclear physics. An ECR-based charge breeder (SPES-CB) will allow post-acceleration of radioactive ions: in particular, the SPES-CB has been designed and developed by LPSC of Grenoble, based on the Phoenix booster. It will be equipped with a complete test bench totally integrated with the SPES beam line: this part of the post-accelerator, together with the newly designed RFQ, composes the so-called ADIGE injector for the superconducting linac ALPI. The injector will employ a unique Medium Resolution Mass Spectrometer (MRMS, R=1/1000), mounted downstream the SPES-CB, in order to avoid the typical drawback of the ECR-based charge breeding technique, that is the beam contamination. This contribution describes the ADIGE injector, with particular attention to the analysis of possible contaminations and the performances expected for the MRMS, showing the beam dynamics calculations for a reference radioactive beam., Proceedings of the 8th Int. Particle Accelerator Conf., IPAC2017, Copenhagen, Denmark

During the EVEDA (engineering validation and engineering design activities) phase of the International Fusion Materials Irradiation Facility (IFMIF) project, a 125 mA/9 MeV linear prototype accelerator (LIPAc) has to be built, tested and operated in Rokkasho-mura (Japan). Involved in this project for several years, CEA-Saclay designed the injector of this accelerator which is composed of an electron cyclotron resonance ion source, delivering a 140 mA deuteron beam at 100 keV, and a low energy beam transport (LEBT) line to match the beam for the injection into the radio-frequency quadrupole. In this paper, the components of the LIPAc injector are described. The commissioning of the ion source and LEBT with beam started in November 2014. The different phases of the commissioning are explained and some noticeable experimental results obtained with a beam at 100 keV are presented.

For the IFMIF/EVEDA RFQ linac, engineering design of the RF input coupler is carried out. The RF input coupler with a cooling port ( L = λ /4), based on a 6 1/8 in. co-axial waveguide, is designed for the CW operation. Three cooling channels are installed into the inside of loop antenna, the outer-conductor and the inner-conductor around RF window. For the loop size, RF coupling factors on beam loading are evaluated with based on the measured S 11 parameter and Q value on aluminum RFQ module. In order to fulfill the acceptance Q 0 value of 9000 for the RFQ, the insertion depth of L = 45 mm is chosen. For this loop antenna size, magnetic field strength around the loop and surface loss density on the loop are evaluated, it is found to satisfy with the RF coupler acceptance values. Coupling cavity with ridge-type structure is also designed for the RF transmitted power test. It is evaluated to be 7.2 kW and 0.5 W/cm 2 for RF power dissipation and RF surface loss density on the RF transmitted power of 200 kW.

SPES, a new accelerator facility for both the production of exotic ion beams and radio-pharmaceuticals, is presently being installed at the Laboratori Nazionali di Legnaro in Italy (LNL). The new cyclotron, which will provide high intensity proton beams for the production of the rare isotopes, has been installed and is now in the commissioning phase. We present here the status of the part of the project devoted to the production and acceleration of fission fragments created in the interaction of an intense proton beam on a production target of UCx. The expected SPES radioactive beams intensities, their quality and their maximum energies (up to 11 MeV/A for A=130) will permit to perform forefront research in nuclear structure and nuclear dynamics far from the stability valley. Another low energy section of the facility is foreseen for new and challenging research, both in the nuclear physics and in the material science frameworks.

A new Radioactive Ion Beam (RIB) facility (SPES) is presently under construction at the Legnaro National Laboratories of INFN. The SPES facility is based on the ISOL method using an UCx Direct Target able to sustain a power of 10 kW. The primary proton beam is provided by a high current Cyclotron accelerator with energy of 40 MeV and a beam current of 0.2-0.5 mA. Neutron-rich radioactive ions are produced by proton induced fission at an expected fission rate of the order of 1013 fissions per second. After ionization and selection the exotic isotopes are re-accelerated by the ALPI superconducting LINAC at energies of 10A MeV for masses in the region A=130 amu. The expected secondary beam rates are of the order of 107 – 109 pps. Aim of the SPES facility is to deliver high intensity radioactive ion beams of neutron rich nuclei for nuclear physics research as well as to be an interdisciplinary research center for radio-isotopes production for medicine and for neutron beams.

The SPES Radioactive Ion Beam facility at INFN-LNL is presently in the construction phase. The facility is based on the Isol (Isotope separation on-line) method with an UCx Direct Target able to sustain a power of 10 kW. The primary proton beam is provided by a high current Cyclotron accelerator with energy of 35-70 MeV and a beam current of 0.2-0.5 mA. Neutron-rich radioactive ions are produced by proton induced Uranium fission at an expected fission rate of the order of 1013 fissions per second. After ionization and selection the exotic isotopes are re-accelerated by the ALPI superconducting Linac at energies of 10A MeV for masses in the region A = 130 amu. The expected secondary beam rates are of the order of 107 - 109 pps. Aim of the SPES project is to provide a facility for high intensity radioactive ion beams for nuclear physics research as well as to develop an interdisciplinary research center based on the cyclotron proton beam.

A new Radioactive Ion Beam (RIB) facility (SPES) is presently under construction at the Legnaro National Laboratories of INFN. The SPES facility is based on the ISOL method using an UCx Direct Target able to sustain a power of 10 kW. The primary proton beam is provided by a high current Cyclotron accelerator with energy of 35-70 MeV and a beam current of 0.2-0.5 mA. Neutron-rich radioactive ions are produced by proton induced fission on an Uranium target at an expected fission rate of the order of 1013 fissions per second. After ionization and selection the exotic isotopes are re-accelerated by the ALPI superconducting LINAC at energies of 10A MeV for masses in the region A=130 amu. The expected secondary beam rates are of the order of 107 – 109 pps. Aim of the SPES facility is to deliver high intensity radioactive ion beams of neutron rich nuclei for nuclear physics research as well as to be an interdisciplinary research centre for radio-isotopes production for medicine and for neutron beams.

In the framework of an advanced Exotic Ion Beam facility project, named SPES (Study and Production of Exotic Species), that will allow a frontier program in Nuclear and Interdisciplinary Physics, an intense thermal neutron beam facility, devoted to perform Boron Neutron Capture Therapy (BNCT) experimental treatments on skin melanoma tumor is currently under construction based on the SPES proton driver. A vast radiobiological investigation in vitro and in vivo has started with the new 10B carriers developed. Special microdosimetric detectors have been constructed to properly measure all the BNCT dose components and their qualities. Both microdosimetric and radiobiological measurements are being performed at the Enea-Casaccia TAPIRO reactor.

The SPES Radioactive Ion Beam facility at INFN-LNL is presently in the construction phase. The facility is based on the Isol (Isotope separation on-line) method with an UCx Direct Target able to sustain a power of 10 kW. The primary proton beam is provided by a high current Cyclotron accelerator with energy of 35-70 MeV and a beam current of 0.20.5 mA. Neutron-rich radioactive ions are produced by proton induced Uranium fission at an expected fission rate of the order of 1013 fissions per second. After ionization and selection the exotic isotopes are re-accelerated by the ALPI superconducting Linac at energies of 10A MeV for masses in the region A = 130 amu. The expected secondary beam rates are of the order of 107 ? 109 pps. Aim of the SPES project is to provide a facility for high intensity radioactive ion beams for nuclear physics research as well as to develop an interdisciplinary research center based on the cyclotron proton beam.

A new Radioactive Ion Beam (RIB) facility (SPES) is presently under construction at the Legnaro National Laboratories of INFN. The SPES facility is based on the ISOL method using an UCx Direct Target able to sustain a power of 8 kW. The primary proton beam is provided by a high current Cyclotron accelerator with energy of 35-70 MeV and a beam current of 0.2-0.7 mA. Neutron-rich radioactive ions are produced by proton induced fission on an Uranium target at an expected fission rate of the order of 1013 fissions per second. After ionization and selection the exotic isotopes are re-accelerated by the ALPI superconducting LINAC at energies of 10A MeV for masses in the region A=130 amu. The expected secondary beam rates are of the order of 107 - 109 pps. Aim of the SPES facility is to deliver high intensity radioactive ion beams of neutron rich nuclei for nuclear physics research as well as to be an interdisciplinary research centre for radio-isotopes production for medicine and for neutron beams.

In the framework of an advanced Exotic Ion Beam facility, named SPES (Study and Production of Exotic Species), that will allow a frontier program both in nuclear and interdisciplinary physics, an intense thermal neutron beam facility, devoted to perform Boron Neutron Capture Therapy (BNCT) experimental treatments on skin melanoma tumor, is currently under construction based on the SPES proton driver. A vast radiobiological investigation in vitro and in vivo has started with the new 10B carriers developed. Special microdosimetric detectors have been constructed to properly measure all the BNCT dose components and their qualities. Both microdosimetric and radiobiological measurements are being performed at the new HYTHOR beam shaping assembly at the Enea‐Casaccia TAPIRO reactor.

The construction of a positive ion injector for the linac ALPI, named PIAVE, at Laboratori Nazionali di Legnaro was funded in 1996. The beam parameters of the injector, consisting of two superconducting radiofrequency quadrupoles (SRFQ) and eight superconducting quarter wave resonators (QWR) for an equivalent voltage of about 8 MV (U/sup 28+/ beam), are fixed. The building is ready, infrastructures and beam transport lines are being ordered. The superconducting RFQs are in the prototyping phase. The general status of the project is reported in this paper, including cryostat and cryogenics, bunching systems, diagnostic devices and electronic control systems.

An accelerator-based source of thermal neutrons for treating cutaneous melanoma is foreseen in the framework of the SPES project,1 proposing a facility for exotic nuclei production at the Laboratori Nazionali di Legnaro (LNL) in Italy. The goal of the project, scheduled for the next five years (1999–2003), is the construction of a l0MeV proton/deuteron accelerator capable of delivering a current of 30 mA, consisting of a 5MeV Radio-Frequency Quadrupole (RFQ) and of a Drift-Tube Linac (DTL). Part of the beam (1-3mA) delivered by the RFQ to the linear accelerator will be used for neutron production for BNCT, via the 9Be(p,n)9B and/or the 9Be(d,n)10B reactions. The BNCT facility which will be built at the LNL is intended to be in the framework of the TERA program for the realization of hadrontherapy facilities in Italy.2

PRISMA is a magnetic spectrometer for heavy ions installed at Laboratori Nazionali di Legnaro (LNL). The most interesting features of the spectrometer are: large solid angle 80 msr, wide momentum acceptance ±10%, mass resolution 1/300 via TOF, energy resolution up to 1/1000 and rotation around the target in a large angular range (−20°⩽θ⩽130°). Those performances will be made possible by software reconstruction of the ion tracks using the position, time and energy signals from the entrance and focal-plane detectors.

PIAVE is the new injector under construction at LNL for the superconducting linac ALPI. The beam, generated by an ECR source, will be bunched by a three harmonic buncher and accelerated by a couple of superconducting RFQs, followed by eight QWR, for an equivalent voltage of 8 MV (U/sup +28/ beam). We present here the complete simulation of the injector, where the same ensemble of particles is transported from the buncher up to ALPI. The code used are PARMTEQM, PARMILA and specific software has been written to transport the particles in the field distribution (calculated by MAFIA) of the transition between the two RFQs and in the QWRs accelerating gaps. The performances of this design, especially for what longitudinal emittance is concerned, are discussed in this paper.