Search

In this study, extracts from non-psychoactive Cannabis sativa L. varieties were characterized by means of ultra high-performance liquid chromatography coupled with high-resolution mass spectrometry (UHPLC-HRMS) and their antiproliferative activity was assessed in vitro. The human chronic myelogenous leukaemia cell line K562 was chosen to investigate the mechanism of cell death. The effect on the cell cycle and cell death was analysed by flow cytometry. Proteins related to apoptosis were studied by western blotting. Mechanical properties of cells were assessed using the Micropipette Aspiration Technique (MAT). The results indicated that the cannabidiol (CBD)-rich extract inhibited cell proliferation of K562 cell line in a dose-dependent manner and induced apoptosis via caspase 3 and 7 activation. A significant decrease in the mitochondrial membrane potential was detected, together with the release of cytochrome c into the cytosol. The main apoptotic markers were not involved in the mechanism of cell death. The extract was also able to modify the mechanical properties of cells. Thus, this hemp extract and its pure component CBD deserve further investigation for a possible application against myeloproliferative diseases, also in association with other anticancer drugs.

Mechanobiology has nowadays acquired the status of a topic of fundamental importance in a degree in Biological Sciences. It is inherently a multidisciplinary topic where biology, physics and engineering competences are required. A course in mechanobiology should include lab experiences where students can appreciate how mechanical stimuli from outside affect living cell behaviour. Here we describe all the steps to build a cell stretcher inside an on-stage cell incubator. This device allows exposing living cells to a periodic mechanical stimulus similar to what happens in physiological conditions such as, for example, in the vascular system or in the lungs. The reaction of the cells to the periodic mechanical stretching represents a prototype of a mechanobiological signal integrated by living cells. We also provide the theoretical and experimental aspects related to the calibration of the stretcher apparatus at a level accessible to researchers not used to dealing with topics like continuum mechanics and analysis of deformations. We tested our device by stretching cells of two different lines, U87-MG and Balb-3T3 cells, and we analysed and discussed the effect of the periodic stimulus on both cell reorientation and migration. We also discuss the basic aspects related to the quantitative analysis of the reorientation process and of cell migration. We think that the device we propose can be easily reproduced at low-cost within a project-oriented course in the fields of biology, biotechnology and medical engineering.

Although in the last 30 years mineral fibres have been the subject of intensive toxicological studies, the actual mechanisms by which mineral fibres exert cytotoxic activity are not fully understood. In this scenario, our work focuses on the monitoring of the very early steps of the interaction between chrysotile, crocidolite and erionite fibres (classified as carcinogenic by the International Agency for Research on Cancer) and macrophages using time-lapse video microscopy coupled with in vitro assays (i.e. LDH cytotoxicity, MTT viability, ROS generation and annexin-FITC/PI apoptosis). All tests were performed on the THP-1 cell line, differentiated into M0 macrophages (M0-THP-1), after acute exposure (8 h) to 25 μg/mL of mineral fibres. Erionite fibres exhibit early toxicity effects while the cytotoxicity induced by chrysotile and crocidolite fibres occurs with a slight delay (ca. 2 h). In concert with literature data, the toxicity of chrysotile and crocidolite is linked to their ability to stimulate Reactive Oxygen Species (ROS) production. ROS are generated by M0-THP-1 cells as a result of frustrated phagocytosis induced by the long asbestos fibres, or produced by asbestos through the redox-active Fe on the fibre surface and metals released into the cell medium as a consequence of the partial dissolution of the fibres. Erionite fibres are able to induce an intracellular ROS increase but this contribution is significantly lower than both crocidolite and chrysotile stimuli. In the short period, crocidolite and chrysotile trigger significant apoptotic phenomena in M0-THP-1 cells while fibrous erionite is associated with early cytotoxicity and probably necrotic-like effect. Because the erionite fibres are short in length, frustrated phagocytosis plays a limited role in the acute toxicity of this fibre. Investigations focused on the intracellular concentrations of Na+ and Ca2+ as a result of cell-fibre interaction suggest an alternative mechanism by which fibrous erionite may induces cell injury and cell death. During phagocytosis erionite fibres quick exchange their extra-framework Na+ with the ions present in the cytosol of M0-THP-1 cells leading to the dysregulation of ionic homeostasis, cell swelling and cell lysis. At the same time, engulfed erionite fibres can reduce the level of cytosolic Ca2+ and interfere with endoplasmic reticulum-mitochondria crosstalk causing a delay in M0-THP-1 induction of apoptosis.

Inhalation of mineral fibres is associated with the onset of an inflammatory activity in the lungs and the pleura responsible for the development of fatal malignancies. It is known that cell damage is a necessary step for triggering the inflammatory response. However, the mechanisms by which mineral fibres exert cytotoxic activity are not fully understood. In this work, the kinetics of the early cytotoxicity mechanisms of three mineral fibres (i.e., chrysotile, crocidolite and fibrous erionite) classified as carcinogenic by the International Agency for Research on Cancer, was determined for the first time in a comparative manner using time-lapse video microscopy coupled with in vitro assays. All tests were performed using the THP-1 cell line, differentiated into M0 macrophages (M0-THP-1) and exposed for short times (8 h) to 25 μg/mL aliquots of chrysotile, crocidolite and fibrous erionite. The toxic action of fibrous erionite on M0-THP-1 cells is manifested since the early steps (2 h) of the experiment while the cytotoxicity of crocidolite and chrysotile gradually increases during the time span of the experiment. Chrysotile and crocidolite prompt cell death mainly via apoptosis, while erionite exposure is also probably associated to a necrotic-like effect. The potential mechanisms underlying these different toxicity behaviours are discussed in the light of the different morphological, and chemical-physical properties of the three fibres.

Several experimental and theoretical studies have extensively investigated the effects of a large diversity of antimicrobial peptides (AMPs) on model lipid bilayers and living cells. Many of these peptides disturb cells by forming pores in the plasma membrane that eventually lead to the cell death. The complexity of these peptide-lipid interactions is mainly related to electrostatic, hydrophobic and topological issues of these counterparts. Diverse studies have shed some light on how AMPs act on lipid bilayers composed by different phospholipids, and how mechanical properties of membranes could affect the antimicrobial effects of such compounds. On the other hand, cyclic lipopeptides (cLPs), an important class of microbial secondary metabolites, have received comparatively less attention. Due to their amphipathic structures, cLPs exhibit interesting biological activities including interactions with biofilms, anti-bacterial, anti-fungal, antiviral, and anti-tumoral properties, which deserve more investigation. Understanding how physicochemical properties of lipid bilayers contribute and determining the antagonistic activity of these secondary metabolites over a broad spectrum of microbial pathogens could establish a framework to design and select effective strategies of biological control. This implies unravelling-at the biophysical level-the complex interactions established between cLPs and lipid bilayers. This review presents, in a systematic manner, the diversity of lipidated antibiotics produced by different microorganisms, with a critical analysis of the perturbing actions that have been reported in the literature for this specific set of membrane-active lipopeptides during their interactions with model membranes and in vivo. With an overview on the mechanical properties of lipid bilayers that can be experimentally determined, we also discuss which parameters are relevant in the understanding of those perturbation effects. Finally, we expose in brief, how this knowledge can help to design novel strategies to use these biosurfactants in the agronomic and pharmaceutical industries.

Understanding the lateral organization of biological membranes plays a key role on the road to fully appreciate the physiological functions of this fundamental barrier between the inside and outside regions of a cell. Ternary lipid bilayers composed of a high and a low melting temperature lipid and cholesterol represent a model system that mimics some of the important thermodynamical features of much more complex lipid mixtures such as those found in mammal membranes. The phase diagram of these ternary mixtures can be studied exploiting fluorescence microscopy in giant unilamellar vesicles, and it is typically expected to give rise, for specific combinations of composition and temperature, to regions of two-phase coexistence and a region with three-phase coexistence, namely, the liquid-ordered, liquid-disordered, and solid phases. Whereas the observation of two-phase coexistence is routinely possible using fluorescence microscopy, the three-phase region is more elusive to study. In this article, we show that particular lipid mixtures containing diphytanoyl-phosphatidylcholine and cholesterol plus different types of sphingomyelin (SM) are prone to produce bilayer regions with more than two levels of fluorescence intensity. We found that these intensity levels occur at low temperature and are linked to the copresence of long and asymmetric chains in SMs and diphytanoyl-phosphatidylcholine in the lipid mixtures. We discuss the possible interpretations for this observation in terms of bilayer phase organization in the presence of sphingolipids. Additionally, we also show that in some cases, liposomes in the three-phase coexistence state exhibit extreme sensitivity to lateral tension. We hypothesize that the appearance of the different phases is related to the asymmetric structure of SMs and to interdigitation effects.

Antimicrobial peptides (AMPs) and lipopeptides (LPs) represent very promising molecules to fight resistant bacterial infections due to their broad-spectrum of activity, their first target, i.e. the bacterial membrane, and the rapid bactericidal action. For both types of molecules, the action mechanism starts from the membrane of the pathogen agents, producing a disorganization of their phase structure or the formation of pores of different size altering their permeability. This mechanism of action is based on physical interactions more than on a lock-and-key recognition event and it is difficult for the pathogens to rapidly develop an effective resistance. Very small differences in the sequence of both AMPs and LPs might lead to very different effects on the target membrane. Therefore, a correct understanding of their mechanism of action is required with the aim of developing new synthetic peptides, analogues of the natural ones, with specific and more powerful bactericidal activity. Atomic force microscopy (AFM), with its high resolution and the associated force spectroscopy resource, provides a valuable technique to investigate the reorganization of lipid bilayers exposed to antimicrobial or lipopeptides. Here, we present AFM results obtained by ours and other groups on the action of AMPs and LPs on supported lipid bilayers (SLBs) of different composition. We also consider data obtained by fluorescence microscopy to compare the AFM data with another technique which can be used on different lipid bilayer model systems such as SLBs and giant unilamellar vesicles. The outcomes here presented highlight the powerful of AFM-based techniques in detecting nanoscale peptide-membrane interactions and strengthen their use as an exceptional complementary tool to in vivo investigations. Indeed, the combination of these approaches can help decipher the mechanisms of action of different antimicrobials and lipopeptides at both the micro and nanoscale levels, and to design new and more efficient antimicrobial compounds.

Stainless steel, widely present in the food industry, is frequently exposed to bacterial colonization with possible consequences on consumers&rsquo, health. 288 stainless steel disks with different roughness (0.25, 0.5 and 1 &mu, m) were challenged with four Gram-negative (Escherichia coli ATCC 25922, Salmonella typhimurium ATCC 1402, Yersinia enterocolitica ATCC 9610 and Pseudomonas aeruginosa ATCC 27588) and four Gram-positive bacteria (Staphylococcus aureus ATCC 6538, Enterococcus faecalis ATCC 29212, Bacillus cereus ATCC 14579 and Listeria monocytogenes NCTT 10888) and underwent three different sanitizing treatments (UVC, alcohol 70% v/v and Gold lotion). Moreover, the same procedure was carried out onto the same surfaces after a nanotechnological surface coating (nanoXHAM&reg, D). A significant bactericidal effect was exerted by all of the sanitizing treatments against all bacterial strains regardless of roughness and surface coating. The nanoXHAM&reg, D coating itself induced an overall bactericidal effect as well as in synergy with all sanitizing treatments regardless of roughness. Stainless steel surface roughness is poorly correlated with bacterial adhesion and only sanitizing treatments can exert significant bactericidal effects. Most of sanitizing treatments are toxic and corrosive causing the onset of crevices that are able to facilitate bacterial nesting and growth. This nanotechnological coating can reduce surface adhesion with consequent reduction of bacterial adhesion, nesting, and growth.

A general single-step approach is introduced for the green fabrication of hybrid biosensors from water dispersion. The resulting device integrates the semiconducting properties of a carbon nanotube (CNT) and the functionality of a protein. In the initial aqueous phase, the protein (viz., lysozyme [LZ]) disperses the (6,5)CNT. Drop-casting of the dispersion on a test pattern (a silicon wafer with interdigitated Au source and drain electrodes) yields a fully operating, robust, electrolyte-gated transistor (EGT) in one step. The EGT response to biorecognition is then assessed using the LZ inhibitorN-acetyl glucosamine trisaccharide. Analysis of the output signal allows one to extract a protein-substrate binding constant in line with values reported for the free (without CNT) system. The methodology is robust, easy to optimize, redirectable toward different targets and sets the grounds for a new class of CNT-protein biosensors that overcome many limitations of the technology of fabrication of CNT biosensors

One of the main concerns of the food industry is microbial adhesion to food contact surfaces and consequent contamination. We evaluated the potential bacteriostatic/bactericidal efficacy of aluminum surfaces with different large-scale roughness (0.25, 0.5 and 1 &mu, m) before and after the surface treatment with a special anodizing based on titanium oxide nanotechnology (DURALTI&reg, ) and after 3 different sanitizing treatments, e.g., UV, alcohol and a natural product named Gold lotion. Four Gram-negative (Escherichia coli ATCC 25922, Salmonella typhimurium ATCC 1402, Yersinia enterocolitica ATCC 9610 and Pseudomonas aeruginosa ATCC 27588) and four Gram-positive (Staphylococcus aureus ATCC 6538, Enterococcus faecalis ATCC 29212, Bacillus cereus ATCC 14579 and Listeria monocytogenes NCTT 10888) bacteria were screened. As far as concerns aluminum surfaces without nanotechnology surface treatment, an overall bacteriostatic effect was observed for all strains with respect to the initial inoculum that was 106 CFU/mL. Conversely, an overall bactericidal effect was observed both for Gram-negative and -positive bacteria on DURALTI&reg, treated aluminum disks, regardless of roughness and sanitizing treatment. These results are innovative in terms of the great potential of the antibacterial activity of nanotechnologically treated food contact surfaces and their combination with some sanitizing agents that might be exploited in the food industry.

Daptomycin (DAP) is a calcium-dependent cyclic lipopeptide with great affinity for negatively charged phospholipids bearing the phosphatidylglycerol (PG) headgroup and has been used since 2003 as a last resort antibiotic in the treatment of severe infections caused by Gram-positive bacteria. The first step of its mechanism of action involves the interaction with the bacterial membrane, which not only represents a physical barrier but also accommodates transmembrane proteins, such as receptors, transporters, and enzymes, whose activity is crucial for the survival of bacteria. This results in a less efficient development of resistance strategies by pathogens compared to common antibiotics that activate or inhibit biochemical pathways connected to specific target proteins. Although already on the market, the molecular mechanism of action of DAP is still a controversial subject of investigation and it is most likely the result of a combination of distinct effects. Understanding how DAP targets the membrane of pathogens could be of great help in finding its analogues that could better avoid the development of resistance. Here, exploiting fluorescence microscopy and atomic force microscopy (AFM), we demonstrated that DAP affects the thermodynamic behavior of lipid mixtures containing PG moieties. Regardless of whether the PG lipids are in the liquid or solid phase, DAP preferably interacts with this headgroup and is able to penetrate more deeply into the lipid bilayer in the regions where this headgroup is present. In particular, considering the results of an AFM/spectroscopy investigation, DAP appears to produce a stiffening effect of the domains where PG lipids are mainly in the fluid phase, whereas it causes fluidification of the domains where PG lipids are in the solid phase.

The lipid bilayer is the basis of the structure and function of the cell membrane. The study of the molecular phenomena that affect biological membranes has a great impact on the understanding of cellular physiology. To understand these phenomena, it has become increasingly necessary to develop simple synthetic models that allow the most basic details of such processes to be reproduced. In this short communication, we took advantage of the properties of two well-established lipid model systems, GUVs and SLBs, with compositions mimicking the cell membrane present in mammals and bacteria, to study the thermotropic phase behavior of lipids as well as the effect of daptomycin, a cyclic lipopeptide used as an antibiotic. The study of mechanical and thermodynamical properties of these model systems could contribute to establish a theoretical framework to develop more efficient strategies for biological control.

A novel auto-cross-linked hyaluronic acid formulation (HA-ACP) has been proposed as a treatment for skin rejuvenation. This prospective pilot study aims to assess its tolerability and performance in the treatment of skin aging of the decolletage. Fifteen women (mean age 49.0 ± 8.0 (range 30–65)) who complained about the appearance of their decolletage were prospectively enrolled and treated with three sets of HA-ACP (IAL-SYSTEM ACP®) intradermal injections, administered three weeks apart. Control visits followed at 80 and 120 days from enrollment. The rejuvenating effect was assessed using the Beagley–Gibson and Fabi–Bolton scores. The investigators and the subjects also subjectively assessed skin appearance using a 1–10 scale. The rejuvenating effect and its persistence were assessed comparing the scores collected at the different experimental times by means of Wilcoxon rank tests. Adverse events and their duration were recorded and compared to those reported in the literature. The HA-ACP formulation provided a significant improvement according to the Beagley–Gibson score (p

Among the potential novel therapeutics to treat bacterial infections, antimicrobial peptides (AMPs) are a very promising substitute due to their broad-spectrum activity and rapid bactericidal action. AMPs strongly interact with the bacterial membrane, and the need to have a correct understanding of the interaction between AMPs and lipid bilayers at a molecular level prompted a wealth of experimental and theoretical studies exploiting a variety of AMPs. Here, we studied the effects of magainin H2 (Mag H2), an analog of the well-known magainin 2 (wt Mag 2) AMP endowed with a higher degree of hydrophobicity, on giant unilamellar vesicles (GUVs) concentrating on its permeabilization activity and the effect on the lipid bilayer mechanical properties. We demonstrated that the increased hydrophobicity of Mag H2 affects its selectivity conferring a strong permeabilization activity also on zwitterionic lipid bilayers. Moreover, when lipid mixtures including PG lipids are considered, PG has a protective effect, at variance from wt Mag 2, suggesting that for Mag H2 the monolayer curvature could prevail over the peptide-membrane electrostatic interaction. We then mechanically characterized GUVs by measuring the effect of Mag H2 on the bending constant of lipid bilayers by flickering spectroscopy and, by using micropipette aspiration technique, we followed the steps leading to vesicle permeabilization. We found that Mag H2, notwithstanding its enhanced hydrophobicity, has a pore formation mechanism compatible with the toroidal pore model similar to that of wt Mag 2.

Protein misfolding and aggregation are the common mechanisms in a variety of aggregation-dependent diseases. The compromised proteins often assemble into toxic, accumulating amyloid-like structures of various lengths and their toxicity can also be transferred both in vivo and in vitro a prion-like behavior. The characterization of protein interactions, degradation and conformational dynamics in biological systems still represents an analytical challenge in the prion-like protein comprehension. In our work, we investigated the nature of a transferable cytotoxic agent, presumably a misfolded protein, through the coupling of a multi-detector, non-destructive separation platform based on hollow-fiber flow field-flow fractionation with imaging and downstream in vitro tests. After purification with ion exchange chromatography, the transferable cytotoxic agentwas analyzed with Atomic Force Microscopy and statistical analysis, showing that the concentration of protein dimers and low n-oligomer forms was higher in the cytotoxic sample than in the control preparation. To assess whether the presence of these species was the actual toxic and/or self-propagating factor, we employed HF5 fractionation, with UV and Multi-Angle Light Scattering detection, to define proteins molar mass distribution and abundance, and fractionate the sample into size-homogeneous fractions. These fractions were then tested individually in vitro to investigate the direct correlation with cytotoxicity. Only the later-eluted fraction, which contains high-molar mass aggregates, proved to be toxic onto cell cultures. Moreover, it was observed that the selective transfer of toxicity also occurs for one lower-mass fraction, suggesting that two different mechanisms, acute and later induced toxicity, are in place. These results strongly encourage the efficacy of this platform to enable the identification of protein toxicants.

Nucleic acid (NA) extraction is a basic step for genetic analysis, from scientific research to diagnostic and forensic applications. It aims at preparing samples for its application with biomolecular technologies such as isothermal and non-isothermal amplification, hybridization, electrophoresis, Sanger sequencing and next-generation sequencing. Multiple steps are involved in NA collection from raw samples, including cell separation from the rest of the specimen, cell lysis, NA isolation and release. Typically, this process needs molecular biology facilities, specialized instrumentation and labor-intensive operations. Microfluidic devices have been developed to analyze NA samples with high efficacy and sensitivity. In this context, the integration within the chip of the sample preparation phase is crucial to leverage the promise of portable, fast, user-friendly and economic point-of-care solutions. This review presents an overview of existing lab-on-a-chip (LOC) solutions designed to provide automated NA extraction from human raw biological fluids, such as whole blood, excreta (urine and feces), saliva. It mainly focuses on LOC implementation aspects, aiming to describe a detailed panorama of strategies implemented for different human raw sample preparations.

The present tutorial is aimed at introducing the reader to the main aspects of electron transfer in nanobiodevices. Nanobiodevices are faced both from scientific and technological viewpoints and their particular implementation as electron transfer devices provides the opportunity of presenting fundamentals of electron transfer theory. Examples of implementations of stand alone devices, along with those involving reconfigurable set-ups based on an electrochemical scanning tunneling microscope, enable introducing heterogeneous electron transfer and electron transport theories in electrochemical environment. Specific cases of nanobiodevices involving redox metalloproteins are reported and experimental results are interpreted and discussed in view of the most recent theoretical advancements, in order to provide the reader with a comprehensive view of the results and promises in this exciting branch of nanotechnology.

Given the increasing trend in bacterial antibiotic resistance, research on antimicrobial peptides and their mechanisms of action has become of huge relevance in the last years. Several studies have investigated the effects of a large variety of antimicrobial peptides directly on bacteria or on model lipid bilayers. In the case of model lipid bilayers, different systems are typically exploited; however, different results could be obtained due to the specific properties of the used system. Supported Lipid Bilayers and Giant Unilamellar Vesicles are among the most popular model systems. Here we used Atomic Force Microscopy and fluorescence microscopy to study the interaction of the antimicrobial peptide Magainin H2, an analog of Magainin 2 with increased hydrophobicity, on Supported Lipid Bilayers. We found that, for this kind of model bilayer, due to its strong interaction with the support, the lateral expansion of the membrane induced by the interaction with the peptides is initially inhibited and subsequently proceeds creating new bilayer regions with many defects. This scenario gives rise in Supported Lipid Bilayers to effects like initial increase of lateral pressure, formation of lipid tubes to release this increase, or development of bilayer regions with lower lipid density. Our results highlight that care should be given to the selected model system when studying and comparing the interaction of peptides with other lipid bilayer model systems.

Mechanical properties of living cells can be used as reliable markers of their state, such as the presence of a pathological state or their differentiation phase. The mechanical behavior of cells depends on the organization of their cytoskeletal network and the main contribution typically comes from the actomyosin contractile system, in both suspended and adherent cells. In the present study, we investigated the effect of a pharmaceutical formulation (OTC – Ossitetraciclina liquida 20%) used as antibiotic, on the mechanical properties of K562 cells by using the Micropipette Aspiration Technique (MAT). This formulation has been shown to increase in a time dependent way the inflammation and toxicity in terms of apoptosis in in vitro experiments on K562 and other types of cells. Here we show that by measuring the mechanical properties of cells exposed to OTC for different incubation times, it is possible to infer modifications induced by the formulation to the actomyosin contractile system. We emphasize that this system is involved in the first stages of the apoptotic process where an increase of the cortical tension leads to the formation of blebs. We discuss the possible relation between the observed mechanical behavior of cells aspirated inside a micropipette and apoptosis.

In recent years the possibility of observing by microscopy the dynamic activity of living cells has been largely pursued. We have developed a low-cost (~ 260 euros) on-stage cell incubator for inverted optical microscopes. This device allows to keep cells in good conditions for their survival and proliferation. The device is based on the use of the Arduino microprocessor interfaced with LabView. It can be connected to a computer via USB port allowing to monitor and register all the useful parameters of the measurements: temperature, CO2 concentration and relative humidity. It consists of a closed metallic and plastic (PMMA) chassis which provides optical transparency to the petri dish in order to use interference contrast imaging techniques. The system exploits also a second Arduino microprocessor to perform autofocus of the images and to automatically acquire images at defined time intervals. Cell biology laboratories could easily construct this device to allow also students to follow dynamic processes of living cells and to practice with the DIY (Do-It-Yourself) approach to biology. At the same time, students could become familiar with the use of low-cost microprocessors like Arduino.

Amphiphilic molecules supposed to affect membrane protein activity could strongly interact also with the lipid component of the membrane itself. Neurosteroids are amphiphilic molecules that bind to plasma membrane receptors of cells in the central nervous system but their effect on membrane is still under debate. For this reason it is interesting to investigate their effects on pure lipid bilayers as model systems. Using the micropipette aspiration technique (MAT), here we studied the effects of a neurosteroid, allopregnanolone (3?,5?-tetrahydroprogesterone or Allo) and of one of its isoforms, isoallopregnanolone (3?,5?-tetrahydroprogesterone or isoAllo), on the physical properties of pure lipid bilayers composed by DOPC/bSM/chol. Allo is a well-known positive allosteric modulator of GABAA receptor activity while isoAllo acts as a non-competitive functional antagonist of Allo modulation. We found that Allo, when applied at nanomolar concentrations (50-200 nM) to a lipid bilayer model system including cholesterol, induces an increase of the lipid bilayer area and a decrease of the mechanical parameters. Conversely, isoAllo, decreases the lipid bilayer area and, when applied, at the same nanomolar concentrations, it does not affect significantly its mechanical parameters. We characterized the kinetics of Allo uptake by the lipid bilayer and we also discussed its aspects in relation to the slow kinetics of Allo gating effects on GABAA receptors. The overall results presented here show that a correlation exists between the modulation of Allo and isoAllo of GABAA receptor activity and their effects on a lipid bilayer model system containing cholesterol.

Amphiphilic molecules which have a biological effect on specific membrane proteins, could also affect lipid bilayer properties possibly resulting in a modulation of the overall membrane behavior. In light of this consideration, it is important to study the possible effects of amphiphilic molecule of pharmacological interest on model systems which recapitulate some of the main properties of the biological plasma membranes. In this work we studied the effect of a neurosteroid, Allopregnanolone (3?,5?-tetrahydroprogesterone or Allo), on a model bilayer composed by the ternary lipid mixture DOPC/bSM/chol. We chose ternary mixtures which present, at room temperature, a phase coexistence of liquid ordered (Lo) and liquid disordered (Ld) domains and which reside near to a critical point. We found that Allo, which is able to strongly partition in the lipid bilayer, induces a marked increase in the bilayer area and modifies the relative proportion of the two phases favoring the Ld phase. We also found that the neurosteroid shifts the miscibility temperature to higher values in a way similarly to what happens when the cholesterol concentration is decreased. Interestingly, an isoform of Allo, isoAllopregnanolone (3?,5?-tetrahydroprogesterone or isoAllo), known to inhibit the effects of Allo on GABAA receptors, has an opposite effect on the bilayer properties.