Search

The aim of this study was to determine a "low-dose protocol" which provides acceptable diagnostic accuracy for detection of root fractures in unrestored anterior maxillary teeth, using an ex vivo model. 48 maxillary anterior teeth, half with horizontal or oblique root fractures, were imaged using CBCT in an anthropomorphic model. Nine X-ray exposure combinations were used, including the manufacturer's standard ("reference") exposure and high-resolution settings ("HiRes"), by varying kV, exposure time, and rotation angle. Measurements of Dose Area Product (DAP) were recorded. Five dental radiologists assessed the scans for root fractures and judged image quality. Parameters of diagnostic accuracy were calculated, including area under the Receiver Operating Characteristic curve (Az). Objective measures of image quality were made at the same exposure combinations using an image quality phantom. Although there was a significant linear relationship between DAP and mean Az, only the lowest DAP exposure combination had a mean Az significantly different to the reference exposure. There was no significant effect on other diagnostic accuracy parameters when using HiRes compared with the reference exposure. There was a significant positive relationship between DAP and contrast resolution. HiRes did not significantly improve contrast resolution and made a small improvement to spatial resolution. Scope existed for radiation dose reduction compared with the manufacturer's guidance. There was no improvement in diagnostic accuracy using HiRes settings. A cautious recommendation for this CBCT machine is that it is possible to achieve a dose reduction of about 20% compared with the reference exposure parameters. [ABSTRACT FROM AUTHOR]

Objectives: This study aimed to evaluate and compare palatal thickness in adults for the placement of mini-implants for miniscrew-assisted rapid palatal expansion (MARPE) appliances using cone-beam computed tomography (CBCT) in a sample of Iraqi-Kurdish people., Materials and Methods: CBCT scans from 68 Kurdish patients, aged between 18 and 30 years, were assessed retrospectively. Of these, 37 were males and 31 were females. The measurements were performed at 3 mm from the mid-palatal suture. T-zone was selected for the anterior points, at the level of the palatal cusps of 2nd premolars, and the posterior point at the level of mesio-palatal cusps of 1st molars bilaterally. Palatal thickness of males and females bilaterally, as well as anterior and posterior areas, were measured and compared. An independent t -test was applied for comparison for normally distributed data, and the Mann-Whitney test was utilized for nonnormally distributed data. Additionally, Bonferroni correction was implemented for p -value adjustment., Results: The mean palatal thickness at the anterior area was 6.06 mm for males, 6.17 mm for females on the right side, 5.94 mm for males, and 5.99 mm for females on the left side. The mean palatal thickness at the posterior area was almost the same for both genders (4.40 mm for males and 4.44 mm for females) on the right side, 4.35 mm for males, and 4.54 mm for females on the left side. Statistically, no significant difference was recorded between males and females, as well as right and left sides in both anterior and posterior regions; however, a very highly statistically significant difference ( p   < 0.001) was recorded when comparing total thickness, including both hard and soft tissue, between anterior and posterior regions., Conclusions: CBCT proves a highly effective modality in assessing palatal thickness and suggesting ideal locations for orthodontic mini-screw placement. Our examination of palatal thickness in a sample of Iraqi-Kurdish individuals revealed no statistical difference between genders or sides, but significant variations were noted between anterior and posterior thicknesses. Comprehensive clinical and pre-expansion CBCT evaluations are crucial for precisely determining the optimal placement of MARPE devices in each patient, ensuring successful outcomes., Competing Interests: The authors declare no conflicts of interest., (Copyright © 2024 Fedil Andraws Yalda et al.)

Objectives: The aim of this study was to determine a "low-dose protocol" which provides acceptable diagnostic accuracy for detection of root fractures in unrestored anterior maxillary teeth, using an ex vivo model., Methods: 48 maxillary anterior teeth, half with horizontal or oblique root fractures, were imaged using CBCT in an anthropomorphic model. Nine X-ray exposure combinations were used, including the manufacturer's standard ("reference") exposure and high-resolution settings ("HiRes"), by varying kV, exposure time, and rotation angle. Measurements of Dose Area Product (DAP) were recorded. Five dental radiologists assessed the scans for root fractures and judged image quality. Parameters of diagnostic accuracy were calculated, including area under the Receiver Operating Characteristic curve (A z ). Objective measures of image quality were made at the same exposure combinations using an image quality phantom., Results: Although there was a significant linear relationship between DAP and mean A z , only the lowest DAP exposure combination had a mean A z significantly different to the reference exposure. There was no significant effect on other diagnostic accuracy parameters when using HiRes compared with the reference exposure. There was a significant positive relationship between DAP and contrast resolution. HiRes did not significantly improve contrast resolution and made a small improvement to spatial resolution., Conclusions: Scope existed for radiation dose reduction compared with the manufacturer's guidance. There was no improvement in diagnostic accuracy using HiRes settings. A cautious recommendation for this CBCT machine is that it is possible to achieve a dose reduction of about 20% compared with the reference exposure parameters.

Objectives: The evidence for diagnostic accuracy using cone beam computed tomography (CBCT) for dental applications depends heavily on ex vivo research, but there is little knowledge of whether the model used affects the diagnostic accuracy results. The objective of this study was to determine the impact of different designs of anthropomorphic models on diagnostic accuracy for the specific task of dental root fracture detection., Methods: Horizontal or oblique root fracture was induced in 24 of 48 permanent maxillary incisors. The 48 teeth were scanned by CBCT using standard clinical exposure factors on five occasions, each with a different model design. Scans were viewed by five dental and maxillofacial radiologists, who each made a forced diagnosis of fracture or no fracture in each root and a judgment on root fracture using a five-point confidence scale. Sensitivity (Se), specificity (Sp) and areas under receiver operating characteristic (ROC) curve (Az) were calculated for each observer for each model., Results: There were no significant differences between the diagnostic accuracy measurements recorded using different models. There were, however, numerous significant differences between observers using the same anthropomorphic model., Conclusions: Despite the differences in X-ray attenuation between the five model designs, the results suggest that the anthropomorphic model does not affect the results of diagnostic accuracy studies on root fracture using this CBCT machine at standard clinical exposures. This provides some confidence in the previously published evidence. The interobserver diagnosis differences indicate that research using only two observers could provide misleading results.