Search

Low-temperature plasmas in and in contact with liquids have emerged as a catalyst-free approach for the selective, electrode-free, and green synthesis of novel materials. For the synthesis of nanomaterials, short-lived solvated electrons have been proposed to be the critical reducing species, while the role of ultraviolet (UV) photons from plasma is less explored. Here, we demonstrate that UV radiation contributes ∼70% of the integral plasma effect in synthesizing silver (Ag) nanoparticles within a glycerol solution. We suggest that the UV radiation causes C-H bond cleavage of the glycerol molecules, with an experimentally and theoretically determined threshold photon energy of only 5 eV. The photon-induced dissociation leads to the formation of glycerol fragmentation radicals, causing the reduction of Ag + ions to Ag neutrals, enabling nanoparticle formation in the liquid phase.

Gamma alumina (γ-Al 2 O 3 ) is widely used as a catalyst and catalytic support due to its high specific surface area and porosity. However, synthesis of γ-Al 2 O 3 nanocrystals is often a complicated process requiring high temperatures or additional post-synthetic steps. Here, we report a single-step synthesis of size-controlled and monodisperse, facetted γ-Al 2 O 3 nanocrystals in an inductively coupled nonthermal plasma reactor using trimethylaluminum and oxygen as precursors. Under optimized conditions, we observed phase-pure, cuboctahedral γ-Al 2 O 3 nanocrystals with defined surface facets. Nuclear magnetic resonance studies revealed that nanocrystal surfaces are populated with AlO 6 , AlO 5 and AlO 4 units with clusters of hydroxyl groups. Nanocrystal size tuning was achieved by varying the total reactor pressure yielding particles as small as 3.5 nm, below the predicted thermodynamic stability limit for γ-Al 2 O 3 .

Luminescent silicon nanocrystals are promising nanomaterials for biomedical applications due to their unique optical properties and biocompatibility. Here, we demonstrate a two-step surface modification approach coupling gas-phase and liquid-phase methods to synthesize PEGylated acrylic acid grafted silicon nanocrystals with near-infrared emission in water and biological media. First, acrylic acid grafted silicon nanocrystals are synthesized by an all-gas-phase approach on a millisecond time scale, omitting high temperature and postpurification processes. Subsequently, room-temperature PEGylation is carried out with these acrylic acid grafted silicon nanocrystals, yielding stable colloidal dispersions in both water and high ionic strength Tyrode's buffer with 20-30 nm hydrodynamic diameters. The PEGylated silicon nanocrystals exhibit photoluminescence in the 650-900 nm near-IR window with quantum yields of ∼30% and ∼13% in deionized water and Tyrode's buffer, respectively, after a 7-day oxidation in water. The surface-functionalized Si NCs exhibit relatively small toxicity to MDA-MB-231 cells at concentrations relevant to bioimaging applications.

Metallic nanoparticles of aluminum (Al), a nontoxic and earth-abundant element, are relevant to plasmonic and energetic applications. However, monodisperse Al nanoparticles are difficult to synthesize using all gas-phase approaches, especially in the 10 to 20 nm size range; yet, many applications require particles of this size due to their enhanced properties. Here, an inductive nonthermal plasma reactor fed with aluminum trichloride (AlCl 3 ) and Ar is used to synthesize single-crystal aluminum nanoparticles. The particles can be produced with or without hydrogen. Several reactor conditions such as AlCl 3 vapor concentration, flow rates, and power are found to strongly influence particle properties such as the oxide shell thickness, particle mono-dispersity, and particle size. Significant quantities of Ar relative to AlCl 3 , short residence times of 10 s of ms, and pressures in excess of 4.7 Torr are required to form Al particles with geometric mean sizes of 10-20 nm and geometric standard deviations as low as 1.3. While the Al nanoparticles are covered with 2-4 nm thick oxide shells, the best synthesis conditions yield particle sizes determined by electron microscopy that are comparable to crystallite sizes determined from x-ray diffraction., (© 2021 IOP Publishing Ltd.)

Aluminum oxide, both in amorphous and crystalline forms, is a widely used inorganic ceramic material because of its chemical and structural properties. In this work, we synthesized amorphous aluminum oxide nanoparticles using a capacitively coupled nonthermal plasma utilizing trimethylaluminum and oxygen as precursors and studied their crystallization and phase transformation behavior through postsynthetic annealing. The use of two reactor geometries resulted in amorphous aluminum oxide nanoparticles with similar compositions but different sizes. Size tuning of these nanoparticles was achieved by varying the reactor pressure to produce amorphous aluminum oxide nanoparticles ranging from 6 to 22 nm. During postsynthetic annealing, powder samples of amorphous nanoparticles began to crystallize at 800 °C, forming crystalline θ and γ phase alumina. Their phase transformation behavior was found to be size-dependent in that powders of small 6 nm amorphous particles transformed to form phase-pure α-Al 2 O 3 at 1100 °C, while powders of large 11 nm particles remained in the θ and γ phases. This phenomenon is attributed to the fast rate of densification and neck formation in small amorphous aluminum oxide particles., Competing Interests: The authors declare no competing financial interest.

Silicon nanocrystals are intriguing materials for biomedical imaging applications because of their unique optical properties and biological compatibility. We report a new surface functionalization route to synthesize biological buffer soluble and colloidally stable silicon nanocrystals, which is enabled by surface boron doping. Harnessing the distinctive Lewis acidic boron surface sites, postsynthetic modifications of plasma synthesized boron doped nanocrystals were carried out with polyethylene glycol (PEG-OH) ligands in dimethyl sulfoxide under photochemical conditions. The influence of PEG concentration, PEG molecular weight, and boron doping percentage on the nanocrystal solubility in a biological buffer has been investigated. The boron doping facilitates the surface functionalization via two probable pathways, by providing excellent initial dispersiblity in polar solvents and providing available acidic boron surface sites for bonding. These boron doped silicon nanocrystals have nearly identical absorption features as intrinsic silicon nanocrystals, indicating that they are promising candidates for biological imaging applications.

Lead halide perovskites possess unique characteristics that are well-suited for optoelectronic and energy capture devices, however, concerns about their long-term stability remain. Limited stability is often linked to the methylammonium cation, and all-inorganic CsPbX 3 (X=Cl, Br, I) perovskite nanocrystals have been reported with improved stability. In this work, the photostability and thermal stability properties of CsPbX 3 (X=Cl, Br, I) nanocrystals were investigated by means of electron microscopy, X-ray diffraction, thermogravimetric analysis coupled with FTIR (TGA-FTIR), ensemble and single particle spectral characterization. CsPbBr 3 was found to be stable under 1-sun illumination for 16 h in ambient conditions, although single crystal luminescence analysis after illumination using a solar simulator indicates that the luminescence states are changing over time. CsPbBr 3 was also stable to heating to 250 °C. Large CsPbI 3 crystals (34±5 nm) were shown to be the least stable composition under the same conditions as both XRD reflections and Raman bands diminish under irradiation; and with heating the γ (black) phase reverts to the non-luminescent δ phase. Smaller CsPbI 3 nanocrystals (14±2 nm) purified by a different washing strategy exhibited improved photostability with no evidence of crystal growth but were still thermally unstable. Both CsPbCl 3 and CsPbBr 3 show crystal growth under irradiation or heat, likely with a preferential orientation based on XRD patterns. TGA-FTIR revealed nanocrystal mass loss was only from liberation and subsequent degradation of surface ligands. Encapsulation or other protective strategies should be employed for long-term stability of these materials under conditions of high irradiance or temperature., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)