Search

Some data center networks have already started to use optical circuit switching (OCS) with potential performance benefits, including high capacity, low latency, and energy efficiency. This paper addresses a switching network design to maximize the network radix, i.e., the number of terminals connected to the network under the condition that a specified number of identical switches with the size $N \times N$ and the maximum admissible blocking probability are given. Previous work presented a two-stage twisted and folded Clos network (TF-Clos) with a blocking probability guarantee for OCS, which has a larger network radix than TF-Clos with a strict-sense non-blocking condition. Expanding the number of stages allows for enhancing the network radix. This paper proposes a model designing an OCS three-stage TF-Clos structure with a blocking probability guarantee to increase the network radix compared to the two-stage TF-Clos. We formulate the problem of obtaining the network configuration that maximizes the network radix as an optimization problem. We conduct an algorithm based on an exhaustive search to obtain a feasible solution satisfying the constraints of the optimization problem. This algorithm identifies the structure with the largest network radix in non-increasing order to avoid unnecessary searches. Numerical results show that the proposed model achieves a larger network radix than the two-stage model.

We propose methods and an architecture to conduct measurements and optimize newly installed optical fiber line systems semi-automatically using integrated physics-aware technologies in a data center interconnection (DCI) transmission scenario. We demonstrate, for the first time to our knowledge, digital longitudinal monitoring (DLM) and optical line system (OLS) physical parameter calibration working together in real-time to extract physical link parameters for fast optical fiber line systems provisioning. Our methodology has the following advantages over traditional design: a minimized footprint at user sites, accurate estimation of the necessary optical network characteristics via complementary telemetry technologies, and the capability to conduct all operation work remotely. The last feature is crucial, as it enables remote operation to implement network design settings for immediate response to quality of transmission (QoT) degradation and reversion in the case of unforeseen problems. We successfully performed semi-automatic line system provisioning over field fiber network facilities at Duke University, Durham, North Carolina. The tasks of parameter retrieval, equipment setting optimization, and system setup/provisioning were completed within 1 h. The field operation was supervised by on-duty personnel who could access the system remotely from different time zones. By comparing Q-factor estimates calculated from the extracted link parameters with measured results from 400G transceivers, we confirmed that our methodology has a reduction in the QoT prediction errors (${\pm}0.3\;{\rm dB}$) over existing designs (${\pm}0.6\;{\rm dB}$).

Datacenter networks (DCNs) consisting of optical circuit switches (OCSs) have been considered as a promising solution to dramatically improve their transmission capacity, energy efficiency, and communication latency. To scale optical-circuit-switched DCNs (OCS DCNs), hierarchical OCSs with tens of thousands of optical fibers need to be installed, and they should be inspected before starting datacenter operations. Since traditional DCNs consist of electrical-packet switches (EPSs), the condition and cabling of fibers can be inspected easily by probing neighboring EPSs. However, OCS networks cannot be inspected in the same manner because OCSs cannot transmit and receive probe signals. Thus, we have had to attach and detach a light source and power meter (LSPM) to every switch for probing all the fibers, which takes weeks. This paper proposes an efficient method for inspecting and certifying fibers in an entire DCN without repeating LSPM reattachment. Our method is based on (1) theories on quickly estimating the fiber condition on the basis of the intensity of received probe signals, (2) the maximum allowable loss of each fiber derived from the transceiver budget used in operations, and (3) an algorithm that reduces the number of probes needed. The results from an extensive numerical evaluation indicate that our method inspected a DCN with 18,432 fibers in at most a day, whereas a baseline method involving repeated LSPM reattachment would take more than a week. We also confirmed that our method never produced false negatives and false positives under practical network conditions.

There are increasing requirements for data center interconnection (DCI) services, which use fiber to connect any DC distributed in a metro area and quickly establish high-capacity optical paths between cloud services and mobile edge computing and the users. In such networks, coherent transceivers with various optical frequency ranges, modulators, and modulation formats installed at each connection point must be used to meet service requirements such as fast-varying traffic requests between user computing resources. This requires technology and architectures that enable users and DCI operators to cooperate to achieve fast provisioning of WDM links and flexible route switching in a short time, independent of the transceiver’s implementation and characteristics. We propose an approach to estimate the end-to-end (EtE) generalized signal-to-noise ratio (GSNR) accurately in a short time, not by measuring the GSNR at the operational route and wavelength for the EtE optical path but by simply applying a quality of transmission probe channel link by link, at a wavelength/modulation-format convenient for measurement. Assuming connections between transceivers of various frequency ranges, modulators, and modulation formats, we propose a device software architecture in which the DCI operator optimizes the transmission mode between user transceivers with high accuracy using only common parameters such as the bit error rate. In this paper, we first implement software libraries for fast WDM provisioning and experimentally build different routes to verify the accuracy of this approach. For the operational EtE GSNR measurements, the accuracy estimated from the sum of the measurements for each link was 0.6 dB, and the wavelength-dependent error was about 0.2 dB. Then, using field fibers deployed in the NSF COSMOS testbed, a Linux-based transmission device software architecture, and transceivers with different optical frequency ranges, modulators, and modulation formats, the fast WDM provisioning of an optical path was completed within 6 min.