Search

Phosphoserine aminotransferase is a vitamin B6-dependent enzyme that catalyzes the reversible conversion of 3-phosphohydroxypyruvate to L-phosphoserine using glutamate as an amine donor. In an effort to gain insight into the substrate-recognition mechanism of the enzyme, crystal structures of Bacillus alcalophilus phosphoserine aminotransferase in the presence or absence of L-phosphoserine were determined to resolutions of 1.5 and 1.6 Å, respectively. Local conformational changes induced upon substrate binding were identified. However, in contrast to other aminotransferases, no domain or subunit movements were observed. Two Arg residues (Arg42 and Arg328) and two His residues (His41 and His327) were found to form a tight binding site for the phosphate group of L-phosphoserine. Comparison with Escherichia coli phosphoserine aminotransferase in complex with the substrate analogue α-methylglutamate revealed more extensive structural changes in the case of L-phosphoserine binding. Based on the structural analysis, the flexibility of Arg328 is proposed to be critical for substrate recognition.

The X-ray susceptibility of the lysine-pyridoxal-5'-phosphate Schiff base in Bacillus alcalophilus phosphoserine aminotransferase has been investigated using crystallographic data collected at 100 K to 1.3 A resolution, complemented by on-line spectroscopic studies. X-rays induce deprotonation of the internal aldimine, changes in the Schiff base conformation, displacement of the cofactor molecule, and disruption of the Schiff base linkage between pyridoxal-5'-phosphate and the Lys residue. Analysis of the "undamaged" structure reveals a significant chemical strain on the internal aldimine bond that leads to a pronounced geometrical distortion of the cofactor. However, upon crystal exposure to the X-rays, the strain and distortion are relaxed and eventually diminished when the total absorbed dose has exceeded 4.7 x 10(6) Ggamma. Our data provide new insights into the enzymatic activation of pyridoxal-5'-phosphate and suggest that special care should be taken while using macromolecular crystallography to study details in strained active sites.

The antiferritin variable light domain (VL) dimer binds human spleen ferritin (∼85% L subunits) but with ∼50-fold lower affinity, K a =4×10 7 M −1 , than the parent F11 antibody ( K a =2.1×10 9 M −1 ). The VL dimer does not recognize either rL (100% L subunits) or rH (100% H subunits) human ferritin, whereas the parent antibody recognizes rL-ferritin. To help explain the differences in ferritin binding affinities and specificities, the crystal structure of the VL domain (2.8 A resolution) was determined by molecular replacement and models of the antiferritin VL–VH dimer were made on the basis of antilysozyme antibody D1.3. The domain interface is smaller in the VL dimer but a larger number of interdomain hydrogen bonds may prevent rearrangement on antigen binding. The antigen binding surface of the VL dimer is flatter, lacking a negatively charged pocket found in the VL–VH models, contributed by the CDR3 loop of the VH domain. Loop CDR2 (VL dimer) is located away from the antigen binding site, while the corresponding loop of the VH domain would be located within the antigen binding site. Together these differences lead to 50-fold lower binding affinity in the VL dimer and to more restricted specificity than is seen for the parent antibody.

The recombinant V(L) domain that represents the variable part of the light chain (type kappa) of mouse monoclonal antibody F11 directed against human spleen ferritin was found to form amyloid fibrils at acidic pH as evidenced by electron microscopy, thioflavin T binding, and apple-green birefringence after Congo red staining. This is the first demonstration of amyloid fibril formation of the mouse V(L) domain. To understand the mechanism of acidic pH-induced amyloid fibril formation, conformational changes of the V(L) domain were studied by one-dimensional NMR, differential scanning calorimetry, analytical ultracentrifugation, hydrophobic dye binding, far-UV circular dichroism, and tryptophan fluorescence. The results indicated accumulation of two intermediate states during acid unfolding, which might be responsible for amyloid fibril formation. The more structured intermediate that exhibited maximal accumulation at pH 3 retained the nativelike secondary structure and a hydrophobic core, but exposed hydrophobic surfaces that bind 8-anilino-1-naphthalenesulfonate. Below pH 2, a more disordered intermediate with dequenched tryptophan fluorescence but still retaining the beta-sheet structure accumulated. The optimal pH of amyloid fibril formation (i.e., pH 4) was close to the optimal pH of the accumulation of the nativelike intermediate, suggesting that the amyloid fibrils might be formed through this intermediate.

Phosphoserine aminotransferase (PSAT; EC 2.6.1.52) from Bacillus alcalophilus, an obligatory alkalophile with optimum growth at pH 10.6, was overexpressed in Escherichia coli, purified and crystallized under two different conditions using the hanging-drop vapour-diffusion method. Crystals were obtained using trisodium citrate dihydrate or PEG 400 as a precipitating agent. Crystals grown in the presence of trisodium citrate belong to the orthorhombic space group C222(1), with unit-cell parameters a = 105.6, b = 136.6, c = 152.0 A, and those grown in the presence of PEG 400 belong to the orthorhombic space group P2(1)2(1)2, with unit-cell parameters a = 143.7, b = 84.3, c = 67.4 A. Complete data sets were collected to 1.7 and 1.6 A resolution, respectively, at 100 K using synchrotron radiation. Analysis of the structure of B. alcalophilus PSAT may reveal structural features that contribute to enzyme adaptability at high pH values.

Differential scanning calorimetry and spectroscopic probes were applied to study folding and stability of the single-chain Fv fragment (scFv) of the anti-human ferritin antibody F11 and its isolated variable light-chain (V(L)) domain. The scFv fragment followed variable heavy-chain domain (V(H))-linker-V(L) orientation and contained (Gly(4)Ser)(3) linker peptide. The two proteins were produced in Escherichia coli and refolded from denaturant-solubilized inclusion bodies. The isolated V(L) domain demonstrated a typical immunoglobulin fold with well-defined secondary and tertiary structure and was capable of binding human ferritin with K(a) = 1.8 x 10(7) M(-)(1), approximately (1)/(30) of the affinity of the parent F11 antibody. Involvement of this V(L) domain into the two-domain scFv fragment yielded a distorted secondary and significantly destabilized tertiary structure in which neither of the two constituent domains attained complete folding. The thermal unfolding enthalpy of scFv F11 at pH 7.0 was as low as 5. 0 J.g(-)(1) versus 16.3 J.g(-)(1) obtained for the V(L) domain and 24.7 J.g(-)(1) for the parent F11 antibody (mouse IgG2a subclass). Intrinsic fluorescence and near-ultraviolet circular dichroic (CD) spectra, and binding of the hydrophobic probe 8-anilino-1-naphthalene sulfonate, confirmed partial loss of tertiary interactions in scFv. The spectroscopic and calorimetric properties of scFv F11 under physiological conditions are consistent with a model of a partially structured state with a distorted beta-sheet as a secondary structure and partial loss of tertiary interactions, which closely resembles the alternatively folded A-state adopted by an immunoglobulin at pH 2-3 [Buchner, J., Renner, M., Lilie, H., Hinz, H.-J., Jaenicke, R., Kiefhaber, T., and Rudolph, R. (1991) Biochemistry 30, 6922-6929]. However, scFv F11 demonstrated only an approximately 4-fold decrease in the antigen-binding affinity (K(a) = 1.3 x 10(8) M(-)(1)) versus the parent F11 antibody. The scFv fragment F11 provides the first description of a functional protein trapped under physiological conditions in a partially structured state. This state is either close to the native one in the antigen-binding affinity or, alternatively, initial weak binding of the antigenic epitope induces folding of scFv F11 into a more structured conformation that generates relatively high affinity.

An antibody combining site generally involves the two variable domains, VH from the heavy and VL from the light chain. We expressed the individual VH domain of the mouse anti-human ferritin monoclonal antibody F11. The loss of affinity was not dramatic (Ka=4.0×107 M−1 versus 8.6×108 M−1 for the parent antibody) and comparable to that previously observed for other VHs. However, the functional VH domain adopted a partially structured state with a significant amount of distorted secondary and compact yet greatly destabilized tertiary structures, as demonstrated by spectroscopic and calorimetric probes. These data provide the first description for a functional antibody domain that meets all the criteria of a partially structured state.

The crystal structure of the vitamin B(6)-dependent enzyme phosphoserine aminotransferase from the obligatory alkaliphile Bacillus alcalophilus has been determined at 1.08 A resolution. The model was refined to an R-factor of 11.7% (R(free) = 13.9%). The enzyme displays a narrow pH optimum of enzymatic activity at pH 9.0. The final structure was compared to the previously reported structure of the mesophilic phosphoserine aminotransferase from Escherichia coli and to that of phosphoserine aminotransferase from a facultative alkaliphile, Bacillus circulans subsp. alkalophilus. All three enzymes are homodimers with each monomer comprising a two-domain architecture. Despite the high structural similarity, the alkaliphilic representatives possess a set of distinctive structural features. Two residues directly interacting with pyridoxal-5'-phosphate are replaced, and an additional hydrogen bond to the O3' atom of the cofactor is present in alkaliphilic phosphoserine aminotransferases. The number of hydrogen bonds and hydrophobic interactions at the dimer interface is increased. Hydrophobic interactions between the two domains in the monomers are enhanced. Moreover, the number of negatively charged amino acid residues increases on the solvent-accessible molecular surface and fewer hydrophobic residues are exposed to the solvent. Further, the total amount of ion pairs and ion networks is significantly reduced in the Bacillus enzymes, while the total number of hydrogen bonds is increased. The mesophilic enzyme from Escherichia coli contains two additional beta-strands in a surface loop with a third beta-strand being shorter in the structure. The identified structural features are proposed to be possible factors implicated in the alkaline adaptation of phosphoserine aminotransferase.

The pET(scF11) plasmid was constructed comprising the gene of a single-chain antibody against human ferritin. This plasmid encodes the leader peptide pelB followed by the heavy chain variable VH domain, (Gly4Ser)3 linker peptide, and light chain variable VL domain. The correctly processed scF11 antibody was expressed in Escherichia coli as an insoluble protein without the leader peptide. Purified soluble scF11 was obtained after solubilization in 6 M GdnHCl followed by a sequential dialysis against decreasing urea concentrations and ion-exchange chromatography. ScF11 demonstrated only a V8- fold decrease in the affinity (Ka = 5.1U10 8 M 31 in RIA and 1.8U U10 8 M 31 in ELISA) vs. the parent IgG2a/U U monoclonal antibody F11. The emission maximum of intrinsic fluorescence strongly suggests a compact conformation with tryptophanyl fluorophores buried in the protein interior, consistent with the functionality of the protein. However, scF11 demonstrated (i) the lack of denaturant-induced fluorescence 'dequenching' effect characteristic of the completely folded parent antibody, and (ii) prominent binding, under physiological conditions, of a hydro- phobic probe 8-anilino-1-naphthalenesulfonate (ANS) recogniz- ing partially structured states of a protein. These findings are indicative of an incomplete tertiary fold that gives ANS access to the protein hydrophobic core. This work provides the first indication that the functional single-chain antibody scF11 displays some properties of a partially structured state and therefore may possess incomplete folding. z 1998 Federation of European Biochemical Societies.

pH is one of the key parameters that affect the stability and function of proteins. We have studied the effect of pH on the pyridoxal-5′-phosphate-dependent enzyme phosphoserine aminotransferase produced by the facultative alkaliphile Bacillus circulans ssp. alkalophilus using thermodynamic and crystallographic analysis. Enzymatic activity assay showed that the enzyme has maximum activity at pH 9.0 and relative activity less than 10% at pH 7.0. Differential scanning calorimetry and circular dichroism experiments revealed variations in the stability and denaturation profiles of the enzyme at different pHs. Most importantly, release of pyridoxal-5′-phosphate and protein thermal denaturation were found to occur simultaneously at pH 6.0 in contrast to pH 8.5 where denaturation preceded cofactor's release by approximately 3°C. To correlate the observed differences in thermal denaturation with structural features, the crystal structure of phosphoserine aminotransferase was determined at 1.2 and 1.5 A resolution at two different pHs (8.5 and 4.6, respectively). Analysis of the two structures revealed changes in the vicinity of the active site and in surface residues. A conformational change in a loop involved in substrate binding at the entrance of the active site has been identified upon pH change. Moreover, the number of intramolecular ion pairs was found reduced in the pH 4.6 structure. Taken together, the presented kinetics, thermal denaturation, and crystallographic data demonstrate a potential role of the active site in unfolding and suggest that subtle but structurally significant conformational rearrangements are involved in the stability and integrity of phosphoserine aminotransferase in response to pH changes. Proteins 2006. © 2006 Wiley-Liss, Inc.