Search

Three rice varieties underwent the field natural extreme high temperature (EHT) with daily average temperature over 30 °C from 21 to 89 days after sowing, and had transparent, chalky and floury grains. The structures, gelatinization properties and enzyme hydrolyses of starches from transparent and floury grains were investigated. Compared with control transparent grains, floury grains subjected to EHT markedly decreased the contents of amylose molecules, amylopectin A chains and amylopectin B1 chains and increased the contents of amylopectin B2 and B3+ chains and the average branch-chain length of amylopectin. Both transparent and floury grains had A-type starches, but floury grain starches exhibited higher relative crystallinity, gelatinization temperature, retrogradation and pasting viscosities than transparent grain starches. Floury grain starches had lower hydrolysis rates than transparent grain starches. Native starches were more resistant to digestion but gelatinized and retrograded starches were more prone to digestion in floury grains than in transparent grains., Competing Interests: Declaration of competing interest There are no conflicts of interest to declare., (Copyright © 2023. Published by Elsevier Ltd.)

Starch structure determination is crucial for understanding its properties and applications. However, method-dependent variations in size determination can lead to ambiguous interpretations. This study investigates the ambiguities in starch structure determination by evaluating the variation in size of four commercial branched starches as determined by average molar mass, gyration radius, hydrodynamic radius, and chain-length distribution. The starches were analyzed using high-performance size-exclusion chromatography (HPSEC) coupled with multi-angle laser light scattering (MALLS) and refractive index detector (RI), and after debranching by HPSEC-RI and high-performance anion-exchange chromatography (HPAEC) with pulsed amperometric detector (PAD). MALLS-derived MW values for amylose and amylopectin were higher than those obtained using the hydrodynamic volume method. The molecular weight of amylopectin chains, determined by the degree of polymerization (DP), ranged between 2.1 and 2.9 × 10 3  g/mol for short chains, and between 4.1 × 10 3 and 1.1 × 10 4  g/mol for long chains. Differences in amylopectin chain content were observed between HPSEC-RI and HPAEC-PAD, highlighting the complementary nature of these techniques. The study underscores the need for standardizing chromatography-based methodologies in starch research, particularly with the advent of new technologies., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The texture of potato mash significantly influences consumer satisfaction. We here investigated the impact of blanching and different methods thereof on the texture and extractable extracellular fractions (EEFs) of potato mash when extracted with water or with dimethyl sulfoxide (DMSO) to seek determining factors of potato mash texture. Mashes prepared from potatoes blanched in 2.04 mM CaCl 2 (CaB-M) exhibited hardness (24.9 N) and stickiness (1.0 N·s) readings intermediate to those from potatoes that were not blanched (NB-M, 19.2 N and 1.2 N·s), or blanched in deionized water (WaB-M, 30.5 N and 0.6 N·s), which aligned with their levels of intact cells. Starch was the main constituent (57.2 % - 64.4 %, w/w) in all EEFs and more starch was present in (1) NB-M and (2) the DMSO extracts. The chain length distributions of DMSO-extracted extracellular starch (DEES) revealed that the amylopectin content increased in the order WaB-M (46.3 %), CaB-M (55.1 %), and NB-M (76.6 %), which was attributed to more intracellular amylopectin being released to the extracellular phase of mashes. The relative contents of shorter chain amylose (degree of polymerization 110-1000) and the DEES yield were significantly correlated to the hardness while the yield of DEEFs was positively correlated with the stickiness., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The objective of this study was to investigate the effects of starch structure (Amylopectin/Amylose, AP/AM) in a low-protein diet on production performance, nitrogen utilization efficiency, and cecal flora in laying hens. Four hundred eighty 45-wk-age Hy-Line Gray laying hens were randomly allocated to five dietary groups and subjected to a 12-wk feeding trial. The AP/AM ratios of the five experiment diets were 1.0, 1.5, 2.0, 3.0, and 4.0. The results indicated that compared to other groups, laying hens fed with AP/AM 4.0 diets showed significantly improved average egg weight and feed conversion ratio (P < 0.05). Furthermore, as the AP/AM ratio increased, there was a significant linear enhancement in intestinal amino acids apparent digestibility, apparent metabolizable energy, and villus area (P < 0.05). Compared to the high AP groups, high-AM diets significantly increased eggshell thickness, crude protein digestibility, and reduced energy supply from amino acid oxidation in ileum (P < 0.05). Additionally, moderate-AM diets enriched with short-chain fatty acid-producing bacteria in the cecum, such as Lactobacillus, Rikenellaceae&#95;RC9&#95;gut&#95;group, and Christensenellaceae&#95;R-7&#95;group, which are associated with the promoting nitrogen utilization. These findings may offer useful information on optimizing starch structure for the design of food products and relevant therapies due to the potential effects on nutrient metabolism and gut homeostasis., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

The digestion of starch have been of great interest, yet little is known about the structure changes and structure-digestibility relationships of waxy rice starch during digestion. In this study, waxy rice starch from Indica and Japonica cultivars were in vitro pre-digested for different times, and the changes in their structure and properties were investigated, including granule morphology, chain length distribution, short-range ordered structure, crystallinity, thermal properties, and digestibility. Pre-digested Indica and Japonica waxy rice starch had the characteristics of porous starch, showing similar surface erosion and pores. With the prolongation of pre-digestion time, the amylose content decreased by 0.74 %-2.69 %, the proportion of amylopectin short A chain (DP6-12) and B 1 chain (DP13-24) decreased, and the proportion of long B 2 (DP25-36) and B 3 chain (DP ≥ 37) increased, especially in pre-digested Indica waxy rice starch. The short- and long-range ordered structure of pre-digested starch increased, manifested by an increase in the absorbance ratio at 1047/1022 cm -1 , a decrease at 1022/995 cm -1 , and an increase in relative crystallinity, leading to higher gelatinization temperature and enthalpy. Pre-digested waxy rice starch had a reduced rapidly digestible starch of 18.27 %-33.93 % and an increased resistant starch of 29.51 %-41.32 %, which will be applied in functional starch and healthy starchy foods., Competing Interests: Declaration of competing interest Authors declared that there are no conflicts of interest to this work., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this study, the effect of gamma ray irradiation on the granular and molecular structures of cassava starch was examined. Cassava starch was irradiated with various gamma ray doses of 25, 50, 75, and 100 kGy. After irradiation, the starch turned yellow, but its granular morphological characteristics remained intact. However, the inner part and the 'Maltese cross' of the starch granules irradiated with 100 kGy were broken, and its crystallinity decreased considerably. The pH reduction (from 5.6 to 3.7) and carboxyl content increase (up to 0.38 %) confirmed the formation of carboxyl groups on the irradiated starch chains. Gamma ray irradiation caused glycosidic bond cleavages, resulting in shortened amylose chains and debranched amylopectin chains containing terminal carboxyl groups. The irradiated starches with different molecular weights have high potential for use in food and non-food applications, for example, in bioplastics. Thermoplastic-irradiated starch (TPIS) materials, and their blends with poly(lactic acid) (PLA) were prepared via extrusion. Both TPIS and PLA/TPIS blends exhibited considerably increased melt flow index values compared with those from the unirradiated starch at approximate increases of 420-2260% and 2-55%, respectively. The improved melt flow ability and reduced viscosity are advantages for some plastic conversion processes such as injection molding., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Starch chain-length distributions play a key role in regulating the processing and digestion characteristics of proso millet starch. Waxy proso millet starch has higher endothermic enthalpy (13.06-16.73 J/g) owing to its higher relative crystallinity (27.83%-32.04%), while nonwaxy proso millet starch has lower peak viscosity (1.0630-1.1930 Pa∙s) and stronger viscoelasticity owing to its higher amylose content (21.72%-24.34%). Non-waxy proso millet starch exhibited two different digestion phases and its resistant starch content (18.37%-20.80%) was higher than waxy proso millet starch. Correlation analysis showed proso millet starch with longer amylopectin B1 chains and more amylopectin B2 chains exhibited excellent thermal ability and retrograde resistance, whereas proso millet starch with shorter and more amylose medium/long-chains not only reduced the digestion rate and increased the resistant starch content but also exhibited stronger viscoelasticity and excellent retrogradation properties. These results could provide more insights into efficient utilization of proso millet starch., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Starch is the main source of dietary energy for humans. In order to understand the mechanisms governing native starch in vitro digestion, digestion data for six starches [wheat, maize, (waxy) maize, rice, potato and pea] of different botanical sources were fitted with the most common first-order kinetic models, i.e. the single, sequential, parallel and combined models. Parallel and combined models provided the most accurate fits and showed that all starches studied except potato starch followed a biphasic in vitro digestion pattern. The biological relevance of the kinetic parameters was explored by determining changes in crystallinity and molecular structure of the undigested starch residues during in vitro digestion. While the crystallinity of the undigested potato starch residues did not change substantially, a respectively small and large decrease in their amylose content and chain length during in vitro digestion was observed, indicating that amylose was digested slightly preferentially over amylopectin in native starch. However, the molecular structure of the starch residues changed too slowly and/or only to an insufficient extent to relate it to the kinetic parameters of the digested fractions predicted by the models. Such parameters thus need to be interpreted with caution, as their biological relevance still needs to be proven., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Background: Starch is the most abundant constituent (dry weight) in the barley endosperm, followed by protein. Variability of compositional and potentially related physical traits due to genotype and environment can have important implications for the malting and brewing industry. This was the first study to assess the effects of genotype, environment, and their interaction (G × E) on endosperm texture, protein content, and starch traits corresponding to granule size, gelatinization, content, and composition, using a multi-environment variety trial in California, USA., Results: Overall, environment explained the largest variance for all traits (ranging from 23.2% to 76.5%), except the endosperm texture traits wherein the G × E term explained the largest variance (45.0-86.5%). Our unique method to quantify the proportion of fine and coarse milled barley particles using laser diffraction showed a binomial distribution of endosperm texture. The number of small starch granules varied significantly (P-value < 0.05) across genotypes and environments. We observed negative correlations between total protein content and each of enthalpy (-0.70), total starch content (-0.54), and difference between offset and onset gelatinization temperature (-0.52). Furthermore, amylose to amylopectin ratio was positively correlated to volume of small starch granules (0.36)., Conclusion: Our findings indicate that environment played a larger role in influencing the majority of starch-related physical and compositional traits. In contrast, variance in endosperm texture was largely explained by G × E. Maltsters would benefit from accounting for environmental contributions in addition to solely genotype when making sourcing decisions, especially with regards to total protein, total starch, enthalpy, and difference between offset and onset gelatinization temperature. © 2024 Society of Chemical Industry., (© 2024 Society of Chemical Industry.)

Multi-scale structures were investigated to understand starch digestibility of instant rice. A wide range of maximum starch digested ratio, up to about 20%, was observed among instant rice prepared from different rice varieties. Instant rice with a smooth and densely packed cross-section showed slower starch digestibility than those with a porous and loosely packed structure. All samples displayed B + V type crystallinity, with V-type crystallinity negatively correlating with maximum starch digested percentage. After digestion, starch chain-length distributions were significantly altered: rapidly digested starch comprised long amylose and short amylopectin chains, while slowly digested starch comprised chains with a peak degree of polymerization (DP) around 130. These results indicate that instant rice with a compact microstructure, high V-type crystallinity, and DP 130 fractions during digestion can reduce starch digestibility. This study provides insights for food industry to develop instant rice products with slow starch digestibility, potentially improving human health., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

In this study, we address the challenge of developing highly conductive hydrogels with enhanced stretchability for use in wearable sensors, which are critical for the precise detection of human motion and subtle physiological strains. Our novel approach utilizes amylopectin, a biopolymer, for the uniform integration of liquid metal gallium into the hydrogel matrix. This integration results in a conductive hydrogel characterized by remarkable elasticity (up to 7100 % extensibility) and superior electrical conductance (Gauge Factor = 31.4), coupled with a minimal detection limit of less than 0.1 % and exceptional durability over 5000 cycles. The hydrogel demonstrates significant antibacterial activity, inhibiting microbial growth in moist environments, thus enhancing its applicability in medical settings. Employing a synthesis process that involves ambient condition polymerization of acrylic acid, facilitated by a hydrophobic associative framework, this hydrogel stands out for its rapid gelation and robust mechanical properties. The potential applications of this hydrogel extend beyond wearable sensors, promising advancements in human-computer interaction through technologies like wireless actuation of robotic systems. This study not only introduces a viable material for current wearable technologies but also sets a foundation for future innovations in bio-compatible sensors and interactive devices., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Rice was collected over the entire grain filling period (about 40 days) to explore the multi-structure evolution and gelatinization behavior changes of starch. During the early stage (DAA 6-14), the significant reduction in lamellar repeat distance (10.04 to 9.68 nm) and relative crystallinity (26.6 % to 22.7 %) was due to initial rapid accumulation of amylose (from 9.38 % to 14.05 %) and short amylopectin chains. Meanwhile, the decreased proportion of aggregation structure resulted in a decrease in the gelatinization temperature and a narrowed range of gelatinization temperature also indicated an increase in homogeneity as starch matured. Gelatinization enthalpy was mainly controlled by aggregation structure, which was negatively and positively related to the amylose content and the degree of order respectively. Peak viscosity of starch pasting increased and reached a maximum (924 cP) at DAA-21 due to larger granule size. Amylose and short amylopectin chains with degree of polymerization 6-12 showed positive and negative correlation with short-term retrogradation ability (setback value) respectively. The dynamics of different scale structure during grain filling had varying degrees of impact on gelatinization properties., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

This study aims to understand the molecular and supramolecular transformations of wheat endosperm biopolymers during bread-making, and their implications to fabricate self-standing films from stale white bread. A reduction in the M w of amylopectin (51.8 × 10 6 vs 425.1 × 10 6  g/mol) and water extractable arabinoxylans WEAX (1.79 × 10 5 vs 7.63 × 10 5  g/mol), and a decrease in amylose length (245 vs 748 glucose units) was observed after bread-baking. The chain length distribution of amylopectin and the arabinose-to-xylose (A/X) ratio of WEAX remained unaffected during bread-making, suggesting that heat- or/and shear-induced chain scission is the mechanism responsible for molecular fragmentation. Bread-making also resulted in more insoluble cell wall residue, featured by water unextractable arabinoxylan of lower A/X and M w , along with the formation of a gluten network. Flexible and transparent films with good light-blocking performance (<30 % transmittance) and DPPH-radical scavenging capacity (~8.5 %) were successfully developed from bread and flour. Bread films exhibited lower hygroscopicity, tensile strength (2.7 vs 8.5 MPa) and elastic modulus (67 vs 501 MPa) than flour films, while having a 6-fold higher elongation at break (10.0 vs 61.2 %). This study provides insights into the changes in wheat biopolymers during bread-making and sets a precedent for using stale bread as composite polymeric materials., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Mario M. Martinez reports financial support was provided by Independent Research Fund Denmark. Wanxiang Guo reports financial support was provided by China Scholarship Council. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

White rice consumption has been regarded as a potential risk factor for non-communicable diseases including obesity and type 2 diabetes. Thus, increasing attention has been paid to develop slowly digested rices with acceptable palatability. As the most abundant component of rice kernels, the fine molecular structure of starch controls not only the texture & aroma, but also the digestion properties of cooked rice. A large number of studies have been conducted to see what molecular structural features control the digestibility and palatability of cooked rice, which further could be connected to starch biosynthesis to enable rices with targeted functionalities to be chosen in non-empirical ways. Nonetheless, little progress has been made because of improper experimental designs. For example, the effects of starch fine molecular structure on cooked rice digestibility and palatability has been rarely studied within one study, resulting to various digestion results. Even for the same sample, it is hard to obtain consistent conclusions and sometimes, the results/coclusions are even controversy. In this review paper, starch fine molecular structural effects on the texture, aroma and starch digestion properties of cooked white rice were summarized followed by a detailed discussion of the relations between the fine molecular structures of amylopectin and amylose to deduce a more general conclusion of starch molecular structure-cooked rice property relations. It is expected that this review paper could provide useful information in terms of how to develop slowly digested rices with acceptable palatability., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Nonconjugated fluorescent polymers devoid of large π-π conjugated structures have received considerable attention due to their significant academic importance and broad application potentials in various fields. Herein, we report an effective strategy to fabricate multifunctional fluorescent amylopectin derivatives and reveal their unique aspects of aggregation-induced emission (AIE), cryogenic long-persistent phosphorescence (~6 s) and excellent processabilities characteristics, which are extremely different from traditional luminogens. These amylopectin-graft-poly(n-butyl acrylate-co-1-vinylimidazole) copolymers (Amylopectin-BVs) prepared by the grafting-from method employing RAFT and experienced subsequently with metal-ligand cross-linking. Specifically, clustering-triggered fluorescent emission or cryogenic long-persistent phosphorescence of amylopectin could be achieved by the aggregation of oxygen and nitrogen atoms along with conformation rigidification, which shows great promise in optoelectronic and biological applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study evaluated the influence of the amylose and amylopectin on the physicochemical properties and printing performance of corn starch gels. Amylose in starch-based gels enhances their storage modulus and the support performance of printed products by promoting the formation of cross-linked gel structures and crystalline structures. However, the higher amylose content in starch gels makes extrusion difficult, resulting in intermittent extrusion in 3D printing. Despite the increased shear-thinning ability of high-amylose starch, its low water retention capacity leads to water loss and rough printed morphology. Additionally, starch with 72 % amylose content exhibits insufficient adhesive properties for effective layer bonding, negatively impacting structural integrity. While gels with 72 % and 56 % amylose content demonstrate higher viscosity and enhanced mechanical properties, their poor adhesion limits the quality of printed layers. Conversely, waxy starch gel demonstrates continuous extrusion and adhesion but lacks adequate support. The 27 % corn starch gel achieves the highest 3D printing accuracy at 88.12 %, suggesting an optimal amylose-amylopectin ratio for desired ink material performance. These findings enhance our understanding of the relationship between amylose content in starch and 3D printing performance, providing a theoretical basis for the development of starch-based printing products., Competing Interests: Declaration of competing interest No, (Copyright © 2024 Elsevier B.V. All rights reserved.)

The high starch content and cost-effectiveness of cassava make it an attractive adjunct in beer brewing, with the fine structure of starch playing a crucial role in determining the composition of fermentable sugars (FS) and overall beer quality. This study investigated the effect of extrusion-induced changes in the starch structure of cassava flour on the FS profile of the wort and, consequently, on the quality attributes of cassava beer. The findings revealed that the shear stress during extrusion significantly reduced the molecular weight to 1.20 × 10 5 g/mol and the branching degree of amylopectin. Simultaneously, there was an increase in the concentrations of short- and intermediate- chain amylose by 5.61% and 42.72%, respectively. These structural changes enhanced the enzymatic hydrolysis of extruded cassava flour (ECF), resulting in a higher total fermentable sugars content (22.00g/100 mL) in the ECF wort, predominantly composed of maltose and glucose. Furthermore, the altered FS profile led to an increased production of higher alcohols and esters in extruded cassava beer (ECB), particularly noted for the elevation of 2-phenylethyl alcohol levels, which imparted a distinctive rose aroma to the ECB. Consequently, the sensory profile of ECB showed significant improvement. This study offers critical insight into optimizing cassava beer quality and broadens the potential applications of cassava flour in the brewing industry., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Morphology, composition and molecular structure of starch directly affect the functional properties. This study investigated the morphological, compositional, and molecular structure properties of starch from starch branching enzyme gene (SBE) and granule-bound starch synthase gene (GBSS) mutated potato, and their associations with thermal, pasting, and film-making properties. SBE mutations were induced in native variety Desiree while GBSS mutations were herestacked to a selected SBE mutated parental line. Mutations in SBE resulted in smaller starch granules and higher amylose content, while GBSS mutations in the SBE background reduced amylose content. Mutations in SBE, particularly with GBSS mutations, significantly increased total phosphorus content. 31P NMR spectroscopy revealed higher proportions of C6-bound phosphate than of C3-bound phosphate in all studied lines. Amylopectin unit chain and internal chain distributions showed higher proportions of long chains in mutated lines compared with Desiree. These amylopectin long-chains were positively correlated with gelatinizationand, pasting temperatures, and temperature at peak viscosity. Short amylopectin chains showed positive correlations with breakdown viscosity, but negative correlations with the crystal melting temperature of retrograded starch. Total phosphorus content was positively correlated with the crystal melting temperature of retrograded starch. Starch from different lines was used to produce a series of potato starch films that differed in morphology and functional properties. A negative correlation was observed between Young's modulus of films and the long amylopectin-chain fraction. Thermal gravimetric analysis revealed highest thermal stability of Desiree starch films, followed by films from SBE-mutated high-amylose lines. Oxygen transmission rate and oxygen permeability analyses showed that films made with starch from selected GBSS and SBEs mutated line maintained comparable oxygen barrier properties to Desiree film. These insights on the impact of genetic mutations on starch properties indicate potential applications of in-planta starch modification for specific end-uses including packaging., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Jayarathna et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

This study explores the impact of postharvest storage temperatures (4 °C and 25 °C) on starch metabolism and textural attributes of glutinous lotus root. While starch metabolism is a well-known factor influencing texture, changes in powdery and sticky qualities have remained unexplored. Our research reveals that storing lotus roots at 4 °C delays water dissipation, amylopectin reduction, and the decline in textural elements such as hardness, adhesiveness, springiness, gumminess, and resilience. Lower temperatures postpone amylopectin reduction and sugar interconversion, thereby preserving the sticky texture. Additionally, they suppress starch formation, delay starch metabolism, and elevate the expression of genes involved in starch metabolism. The correlation between gene expression and root texture indicates the critical role of gene regulation in enzyme activity during storage. Overall, low-temperature storage extends lotus root preservation by regulating metabolite content, enzyme activities, and the corresponding genes involved in starch metabolism, preserving both intrinsic and external root quality., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Understanding functionality of polysaccharides such as starch requires molecular representations that account for their functional characteristics, such as those related to gelatinization, gelation, and crystallization. Starch macromolecules are inherently very complex, and precise structures can only be deduced from large data sets to generate relational models. For amylopectin, the major, well-organized, branched part of starch, two main molecular representations describe its structure: the classical cluster model and the more recent backbone model. Continuously emerging data call for inspection of these models, necessary revisions, and adoption of the preferred representation. The accumulated molecular and functional data support the backbone model and it well accommodates our present knowledge related to the biosynthesis of starch. This Perspective focuses on our current knowledge of starch structure and functionality directly in relation to the backbone model of amylopectin.

This study used a combination method of ultrafine grinding and pregelatinization to modify rice starch (RS) to delay its retrogradation and provide a rationale for prolonging rice product shelf life. The structure and physicochemical properties of the pregelatinized ultrafine grinding rice starch (PURS) were compared with those of RS, ultrafine grinding rice starch (URS), and pregelatinized rice starch (PRS). The microstructure, molecular weight, branched starch length distribution, short-range order, crystal structure, and physical properties of RS, URS, PRS, and PURS were analyzed, respectively. Results showed that RS, URS, PRS, and PURS granules exhibited similar spherical or polygonal shapes, and the content of amylose and short-branched starch in PURS increased compared with RS, URS, and PRS. Furthermore, the cross-polarization of PRS and PURS disappeared. Long-chain amylopectin and average molecular weight of PURS decreased significantly after ultrafine grinding. Our study suggested reduced breakdown value and setback value and improved gel stability, and PURS was beneficial for delaying retrogradation compared to RS, URS, and PRS. The ultrafine grinding method improved the water swelling capacity (WSC), solubility, pasting properties, and gelation properties of PRS. The hardness of PURS was reduced by ultrafine grinding. These suggest that the combination of ultrafine grinding and pregelatinization could improve the properties of RS. Pearson's correlation analysis showed that the structure of PURS significantly influenced the physicochemical properties. The present study was helpful in better understanding the importance of ultrafine grinding in improving the anti-retrogradation of PURS and provided new insights into extending the shelf life of rice products by ultrafine grinding and pregelatinization., (© 2024 Institute of Food Technologists.)

Coarse cereals have been promoted for their health benefits, and sourdough is used to improve their steamed bread sensory acceptance. However, grains vary in dough physiochemical properties and steamed bread-making performance. This study investigated the effects of yeast and sourdough fermentation on the biochemical, textural, and flavor properties of dough and steamed bread of eight grain types. Results indicated that sourdough dough had a lower pH and higher total titrable acidity compared with yeast group. The texture of sourdough-steamed bread was significantly improved with reduced hardness and enhanced springiness. Microstructure revealed that sourdough resulted in starch surface corrosion and less amylopectin recrystallization. Aldehydes, alcohols, and esters are more dominant in sourdough group than yeast group. Foxtail millet and sorghum steamed breads exhibited the highest performances in texture, flavor, and sensory evaluation. This could provide a theoretical basis for producing coarse cereal products with desirable quality., (© 2024 Institute of Food Technologists.)

Normal rice starch consists of amylopectin and amylose, whose relative amounts and chain-length distributions (CLDs) are major determinants of the digestibility and rheology of cooked rice, and are related to metabolic health and consumer preference. Here, the mechanism of how molecular structural features of pure amylopectin (waxy) starches affect starch properties was explored. Following debranching, chain-length distributions of seven waxy varieties were measured using size-exclusion chromatography, and parameterized using biosynthesis-based models, which involve breaking up the chain-length distribution into contributions from five enzyme sets covering overlapping ranges of chain length; structure-property correlations involving the fifth set were found to be statistically significant. Digestibility was measured in vitro, and parameters for the slower and longer digestion phase quantified using non-linear least-squares fitting. The coefficient for the significant correlation involving amylopectin fine structure for the fifth set was -0.903, while the amounts of amylopectin short and long chains were found to dominate breakdown viscosity (correlation coefficients 0.801 and - 0.911, respectively). This provides a methodology for finding or developing healthier starch in terms of lower digestion rate, while also having acceptable palatability. As rice breeders can to some extent control CLDs, this can help the development of waxy rices with improved properties., Competing Interests: Declaration of competing interest The authors declare no competing financial interest., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

To elucidate the relationship between the structural evolution of starch within noodles during cooking and the hardness, the panoramic and local microstructure of cooked noodles were quantitatively analyzed, and the structure of starch in noodles were measured. We found that in the case of starch within cooked noodles with a high degree of swelling, the quantitative analysis of each ring was sufficient to represent the structural differences. Changes occurring in starch inside noodles during cooking were not homogeneous. The structural modifications of starch in the outer ring were greater than in the inner ring along with the extension of cooking time. The main reason responsible for the high hardness was attributed to low swelling degree and high short-range order of starch in the center. Water migration from the periphery to the center of the noodles, which was closely related to the fine structure of amylopectin, determined the state of central starch. Wheat starch with more large amylopectin molecules and more long amylopectin chains could enhance the inhibition of water migration and decrease the swelling degree of starch in the center, in order to endow a high hardness to noodles. These results will be useful for the ingredients selection for the production of noodles with desirable quality. In addition, the analysis method established in this work promoted the realization of quantitative comparison of the cooked noodles microstructure, that is an effective tool to clarify the structural basis of macroscopic quality of noodles., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

The adhesive strength between the sizing agent and carbon fiber (CF) plays a crucial role in improving the interfacial properties of composites, while such a vital aspect has been consistently disregarded. In this study, a hyperbranched waterborne polyurethane (HWPU) sizing agent was synthesized from biogenetically raw materials including gallic acid, l-Lysine diisocyanate and amylopectin. Concurrently, hydrogen-bonded cross-linked network structures were established utilizing a botanical polyphenol tannin as coupling agent to effectively connect CF with HWPU. This meticulous process yielded CF/nylon 6 composites with improved properties and their mechanical characteristics were systematically investigated. The findings showcased a noteworthy boost in flexural strength and interlaminar shear strength (ILSS), showing enhancements of 54.6 % and 61.4 %, respectively, surpassing those of untreated CF. Furthermore, the interfacial shear strength (IFSS) test indicated a remarkable 70.3 % improvement. This approach presents a highly promising concept aimed at developing sustainable green waterborne polyurethane sizing agent and improving the interfacial performance of CF composite materials., Competing Interests: Declaration of competing interest The authors declared that they have no conflicts of interest to this work. We declare that we do not have any commercial or associative interest that represents a conflict of interest in connection with the work submitted., (Copyright © 2024. Published by Elsevier B.V.)

Unripe banana flour starch possesses a high degree of resistance to enzymatic hydrolysis, a unique and desirable property that could be exploited in the development of functional food products to regulate blood sugar levels and promote digestive health. However, due to a multifactorial phenomenon in the banana flour matrix-from the molecular to the micro level-there is no consensus regarding the complex mechanisms behind the slow enzymatic hydrolysis of unripe banana flour starch. This work therefore explores factors that influence the enzymatic hydrolysis resistance of raw and modified banana flour and its starch including the proportion and distribution of the amorphous and crystalline phases of the starch granules; granule morphology; amylose-amylopectin ratio; as well as the presence of nonstarch components such as proteins, lipids, and phenolic compounds. Our findings revealed that the relative contributions of these factors to banana starch hydrolytic resistance are apparently dependent on the native or processed state of the starch as well as the cultivar type. The interrelatability of these factors in ensuring amylolytic resistance of unripe banana flour starch was further highlighted as another reason for the multifactorial phenomenon. Knowledge of these factors and their contributions to enzymatic hydrolysis resistance individually and interconnectedly will provide insights into enhanced ways of extraction, processing, and utilization of unripe banana flour and its starch., (© 2024 Institute of Food Technologists.)

The gelatinization and retrogradation properties of glutinous rice starch are important factors that affect its quality. In this study, the thermal properties, viscosity properties and retrogradation of starch from 152 natural glutinous varieties were investigated, and further explored the effects of starch structure on gelatinization temperature (GT) and retrogradation. The results demonstrated a strong positive linear correlation between thermal properties and retrogradation of glutinous rice. The high molecular weight, high crystallinity and large particle size of starch have significant positive effects on the thermal properties and retrogradation of amylopectin. Varieties of glutinous rice with high molecular weight starch, large starch particle sizes, and high crystallinity exhibited high GT and retrogradation rates (R%). Additionally, there was a significantly negative correlation between the range of gelatinization temperature and gelatinization enthalpy in raw starch, while a larger temperature range in retrograded starch corresponded to greater gelatinization enthalpy. The recrystallization of retrograded starch exhibited higher crystal heterogeneity and a broader range of melting points compared to raw glutinous starch. These findings provide valuable insights for breeding glutinous rice varieties with desirable retrogradation traits, particularly those with low R%., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

V-type starches have been widely used in food science, agriculture, and biomedical science, but their mechanism of formation in nonaqueous solvents remains unclear. This study performed glycerol-ethanol thermal substitution to prepare V-type starch at atmospheric pressure. Scanning electron microscopy and confocal laser scanning microscopy revealed that breakage of starch particles began in the hilum region and rapidly spread to the periphery with the temperature increased from 100 °C to 130 °C. The Maltese crosses of the starch disappeared and starch particles had the form of doughnut-shaped rings when the glycerol temperature was 140 °C. Glycerol temperature was not found to significantly affect the chain length of amylopectin, meaning that glycerol molecules may stabilize the conformation of amylose through hydrogen bonding, promoting the amylose to form a V-type spiral structure. Additionally, A-type crystallinity and double helix structure proportion of the samples significantly decreased from 30.81 % and 42.21 % to 5.70 % and 16.47 % as the temperature of glycerol was increased to 140 °C, whereas the V-type crystallinity and single helix structure proportion of the samples remarkably increased from 13.26 % and 1.05 % to 37.97 % and 25.09 %, respectively. This study provided a facile and versatile approach to effectively regulate the formation of V-type starch., Competing Interests: Declaration of competing interest All authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Starch, a polysaccharide primarily composed of amylose and amylopectin, serves as a critical energy source in plants. However, its native properties often limit its application in the food industry. To overcome these limitations, starch modification is essential for enhancing its technological characteristics. In this context, this review explored the impacts of pulsed electric field (PEF) technology on starch modification. PEF, along with other electrotechnologies, utilizes high-voltage electrical pulses to induce structural and chemical changes in starch granules, leading to improvements in properties such as gelatinization, solubility, viscosity, and swelling capacity. Although PEF is a non-thermal process, it enables significant structural and physicochemical modifications in starch. By avoiding high temperatures that can cause changes in color, flavor, and degradation of essential nutrients, PEF-modified starch results in better preservation of nutritional and sensory qualities, while also enhancing its performance in various industrial processes. Despite its advantages, challenges such as the need for standardized protocols and potential unwanted side reactions at high intensities remain. This review examined the effectiveness of PEF in modifying starch for enhanced technological applications in the food industry, addressing both its benefits and limitations. Additionally, the article provided a foundational overview of starch, including its chemical structure, functionalities, and sources, both conventional and non-conventional, ensuring a comprehensive understanding of how PEF can be applied to optimize starch properties for industrial use., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Background: Natural emulsifiers are increasingly preferred by the food industry to meet consumers' demand for 'clean-label' emulsion products. In the present study, 10 short-term retrograded starches with unique molecular structures were explored to examine the relationships between starch structures and their ability to form stable oil-in-water emulsions., Results: Waxy maize starch showed the largest value of contact angle and conductivity of emulsion, whereas potato and lentil starch showed the lowest value of contact angle and conductivity of emulsion, respectively. Emulsion prepared by rice starch showed the lowest, whereas that of sweet potato starch showed the highest value of viscosity. Consequentially, the emulsion stabilized with waxy maize and tapioca starch showed the smallest and less polydisperse droplets, resulting in a much higher emulsifying index. On the other hand, emulsion prepared with potato starch showed the highest stability compared to other starches. Correlation analysis suggested that starches with larger molecular size, a lower amylose content and shorter amylopectin short chains had a higher emulsification ability, whereas the amount of starch molecular interactions formed during short-term retrogradation revealed no obvious linking to emulsion performances., Conclusion: These findings provided food industry with exciting opportunities to develop 'clean-label' emulsions with desirable properties. © 2024 Society of Chemical Industry., (© 2024 Society of Chemical Industry.)

Conductive hydrogels have been widely used in wearable electronics due to their flexible, conductive and adjustable properties. With ever-growing demand for sustainable and biocompatible sensing materials, biopolymer-based hydrogels have drawn significant attention. Among them, starch-based hydrogels have a great potential for wearable electronics. However, it remains challenging to develop multifunctional starch-based hydrogels with high stretchability, good conductivity, excellent durability and high sensitivity. Herein, amylopectin and ionic liquid were introduced into a hydrophobic association hydrogel to endow it with versatility. Benefiting from the synergistic effect of amylopectin and ionic liquid, the hydrogel exhibited excellent mechanical properties (the elongation of 2540 % with a Young's modulus of 12.0 kPa and a toughness of 1.3 MJ·m -3 ), self-recovery, good electrical properties (a conductivity of 1.8 S·m -1 and electrical self-healing), high sensitivity (gauge factor up to 26.85) and excellent durability (5850 cycles). The above properties of the hydrogel were closely correlated to its internal structure from hydrophobic association, H-bonding and electrostatic interaction, and can be regulated by changing the component contents. A wireless wearable sensor based on the hydrogel realized accurate and stable monitoring of joint motions and expression changes. This work demonstrates a kind of promising biopolymer-based materials as candidates for high-performance flexible wearable sensors., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The extrusion process, a vital technique for starch modification, is notably influenced by the moisture content (MC). This study aimed to elucidate the effect of varying MC levels (18, 22, 26, and 30%) on the structural and physicochemical characteristics of cassava flour during extrusion. Extrusion resulted in the fraction of degree of polymerization 13‒24, degree of branching, and molecular weight increased with increasing MC, with values of above indexes being 32.29%, 1.05%, and 1.21 × 10 5 g/mol, respectively, at a MC of 18%. This suggested that the degradation of amylopectin and amylose. Additionally, there was an increase in rapidly digestible starch (RDS) and a decrease in slowly digestible starch (SDS) in the extrudates in comparison to the native cassava flour. The extrusion of cassava flour at 18% MC exhibited the highest levels of RDS and SDS, reaching 64.52% and 4.06%, respectively. These findings indicated that low moisture extrusion could be a more effective method for disrupting the structure of cassava starch and enhancing the digestibility of cassava flour, offering valuable insights for the optimized use of cassava extrudates in various applications., Competing Interests: Declarations Competing Interests The authors declare no competing interests., (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

The digestibility of starch is affected by amylose content, and increasing amylopectin chain length which can be manipulated by alterations to genes encoding starch-branching enzymes (SBEs). We investigated the impact of Cas9-mediated mutagenesis of SBEs in potato on starch structural properties and digestibility. Four potato starches with edited SBE genes were tested. One lacked SBE1 and SBE2, two lacked SBE2 and had reduced SBE1, and one had reduced SBE2 only. Starch structure and thermal properties were characterised by DSC and XRD. The impact of different thermal treatments on digestibility was studied using an in vitro digestion protocol. All native potato starches were resistant to digestion, and all gelatinised starches were highly digestible. SBE modified starches had higher gelatinisation temperatures than wild type potatoes and retrograded more rapidly. Gelatinisation and 18 h of retrogradation, increased gelatinisation enthalpy, but this did not translate to differences in digestion. Following 7 days of retrogradation, starch from three modified SBE starch lines was less digestible than starch from wild-type potatoes, likely due to the recrystallisation of the long amylopectin chains. Our results indicate that reductions in SBE in potato may be beneficial to health by increasing the amount of fibre reaching the colon after retrogradation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Crown Copyright © 2024. Published by Elsevier Ltd. All rights reserved.)

Background: The continuous cultivation of rice-wheat in the same field is a key element of double-cropping systems in the Indo-Gangetic plains. Yields of such cropping systems are increasingly challenged as climate change drives increases in temperature, terminal stress and uneven rainfall, delaying rice harvesting and subsequently delaying sowing of wheat. In this paper, we evaluate the optimum sowing dates to achieve high grain yield and quality of wheat cultivars in northwest India. Three cultivars of wheat, HD-2967, HD-3086 and PBW-723, were sown on three different dates at the research farm of ICAR-IARI, New Delhi, to generate different weather conditions at different phenological stages. Different biophysical attributes, photosynthetic rate, stomatal conductance and transpiration rate, were measured at different phenological stages. Yield and grain quality parameters such as protein, starch, amylopectin, amylose and gluten were measured in different cultivars sown on different dates., Results: Biophysical parameters were found to be higher in timely sown crops followed by late-sown and very late-sown crops. Further, the different sowing dates had a significant (P < 0.05) impact on the grain quality parameters such as protein, starch, amylopectin, amylose and gluten content. Percentage increases in the value of starch and amylose content under timely sown were ~7% and 11.6%, ~5% and 8.4%, compared to the very late-sown treatment. In contrast, protein and amylopectin contents were found to increase by ~9.7% and 7.5%, ~13.8% and 16.6% under very late-sown treatment., Conclusion: High-temperature stress during the grain-filling periods significantly decreased the grain yield. Reduction in the grain yield was associated with a reduction in starch and amylose content in the grains. The protein content in the grains is less affected by terminal heat stress. Cultivar HD-3086 had higher growth, yield as well as quality parameters, compared to HD-2967 and PBW-723 in all treatments, hence could be adopted by farmers in northwest India. © 2024 Society of Chemical Industry., (© 2024 Society of Chemical Industry.)

Starch structure is often characterized by the chain-length distribution (CLD) of the linear molecules formed by breaking each branch-point. More information can be obtained by expanding into a second dimension: in the present case, the total undebranched-molecule size. This enables answers to questions unobtainable by considering only one variable. The questions considered here are: (i) are the events independent which control total size and CLD, and (ii) do ultra-long amylopectin (AP) chains exist (these chains cannot be distinguished from amylose chains using simple size separation). This was applied here to characterize the structures of one normal (RS01) wheat and two high-amylose (AM) mutant wheats (an SBEIIa knockout and an SBEIIa and SBEIIb knockout). Absolute ethanol was used to precipitate collected fractions, then size-exclusion chromatography for total molecular size and for the size of branches. The SBEIIa and SBEIIb mutations significantly increased AM and IC contents and chain length. The 2D plots indicated the presence of small but significant amounts of long-chain amylopectin, and the asymmetry of these plots shows that the corresponding mechanisms share some causal effects. These results could be used to develop plants producing improved starches, because different ranges of the chain-length distribution contribute independently to functional properties., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Normal and waxy maize starches were treated with mild alkali treatment (pH 8.5, 9.9, 11.3) in two temperature-time combinations (25 °C for 1 h and 50 °C for 18 h) to investigate the effect on starch structure and properties. Mild alkali treatment partly removed the starch granule-associated proteins and lipids of normal (from 0.31 % to 0.24 % and from 0.77 % to 0.55 %, respectively) and waxy maize starches (from 0.22 % to 0.18 % and from 0.24 % to 0.15 %, respectively). Gelatinization enthalpy of waxy maize starch increased with alkali treatment from 16.20 J·g -1 to 21.95 J·g -1 , indicating that amylopectin (AP) rearrangement and AP-AP double helices formation might occur. But amylose could inhibit these effects by restricting mobility of amylopectin, and no such changes occurred for normal maize starch. Alkali treatment decreased gelatinization temperature and increased peak and final viscosity. Alkali treatment decreased trough viscosity and increased setback of normal maize starch. The hydrothermal treatment promoted the effect of alkali, attributed to the more rapid molecular motion at higher temperature. Normal and waxy starches showed different changes after alkali treatment, indicating that amylose played an important role in controlling the effect of alkali and hydrothermal treatment, primarily as an obstructer of amylopectin rearrangement in mild alkali treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The current research emphasis on identifying unconventional starch sources with varied properties to broaden industrial applications. The focus of this research is on the search for alternative sources of starch with different properties in order to expand their potential use in the industrial sector. Starch was extracted from Trapa natans and Nelumbo nucifera and analyzed for their physicochemical and functional properties. They had similar protein (0.35 %) and ash contents, but the nitrogen-free extract was slightly higher in Nelumbo starch (87.58 %) than in Trapa starch (85.09 %). The amylose and amylopectin contents were 23.89 % and 76.11 % in Trapa starch and 15.70 % and 84.30 % in Nelumbo starch, respectively. Fourier-transform infrared spectroscopy identified both as polysaccharides. The characteristic absorption bands assigned to the stretching of OH groups (3324 cm -1 ; 3280 cm -1 ), the asymmetric and symmetric stretching of aliphatic chain groups (2925 cm -1 ; 2854 cm -1 ), the bending vibration of CHO groups (1149 cm -1 ; 1144 cm -1 ) were present in both the starch samples, with the exception of CH 3 which could not be detected in Trapa natans starch. X-ray diffraction confirmed hexagonal and orthorhombic crystal structures in Nelumbo nucifera and Trapa natans starch. Scanning electron microscopy revealed a smooth oval and a rough cuboidal shape for lotus and chestnut starch, respectively. Rheological analysis showed that both starch solutions exhibited gel behavior, with Trapa showing stronger gel behavior after the crossover point. These results suggest potential applications in various industries, including the food industry and beyond., Competing Interests: Declaration of competing interests The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The digestibility of ungelatinized, short-term retrograded and long-term retrograded starch from foxtail millet was investigated and correlated with starch chain length distributions (CLDs). Some variations in starch CLDs of different varieties were obtained. Huangjingu and Zhonggu 9 had higher average chain lengths of debranched starch and lower average chain length ratios of amylopectin and amylose than Dajinmiao and Jigu 168. Compared to ungelatinized starch, retrogradation significantly increased the estimated glycemic index (eGI), whereas significantly decreased the resistant starch (RS). In contrast, long-term retrograded starches have lower eGI (93.33-97.37) and higher RS (8.04-14.55%) than short-term retrograded starch. PCA and correlation analysis showed that amylopectin with higher amounts of long chains and longer long chains contributed to reduced digestibility in ungelatinized starch. Both amylose and amylopectin CLDs were important for the digestibility of retrograded starch. This study helps a better understanding of the interaction of starch CLDs and digestibility during retrogradation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The retrogradation of starch is crucial for the texture and nutritional value of starchy foods products. There is mounting evidence highlighting the significant impact of starch's fine structures on starch retrogradation. Because of the complexity of starch fine structure, it is a formidable challenge to study the structure-property relationship of starch retrogradation. Several models have been proposed over the years to facilitate understanding of starch structure. In this review, from the perspective of starch models, the intricate structure-property relationship is sorted into the correlation between different types of structural parameters and starch retrogradation performance. Amylopectin B chains with DP 24-36 and DP ≥36 exhibit a higher tendency to form ordered crystalline structures, which promotes starch retrogradation. The chains with DP 6-12 mainly inhibit starch retrogradation. Based on the building block backbone model, a longer inter-block chain length (IB-CL) enhances the realignment and reordering of starch. The mathematical parameterization model reveals a positive correlation between amylopectin medium chains, amylose short chains, and amylose long chains with starch retrogradation. The review is structured according to starch models; this contributes to a clear and comprehensive elucidation of the structure-property relationship, thereby providing valuable references for the selection and utilization of starch., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Three cultivars of waxy rice starch with different multi-scale structures were subjected to α-amylase hydrolysis to determine amylopectin fine structure, production of oligosaccharides, morphology, and crystallinity of the partially hydrolyzed starch granules. α-amylases hydrolyzed the amylopectin B2 chain during the initial stage of hydrolysis, suggesting that it is primarily located in the outer shell of the granules. For waxy rice starch with loose structure, α-amylases attacked the crystalline and amorphous regions simultaneously in the initial stage, while for starch granules with compact structure, the outer shell blocklet (crystalline structure) can be a hurdle for α-amylases to proceed to hydrolysis of the internal granule structure. The ability of α-amylases from porcine pancreatic α-amylases to attack the outer shell crystalline structure was lower than that of α-amylases from Bacillus amyloliquefaciens and Aspergillus oryzae. These results show that α-amylase source and rice cultivar combinations can be used to generate diverse structures in degraded waxy rice starch., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Small-granule starches (SGSs) have technological advantages over starches of conventional sizes for many applications. The study compared the granular characteristics of three SGSs (from amaranth, quinoa, and taro) with those of maize and potato starches and revealed their molecular basis. The results indicated that the supramolecular architecture of starch granules was not necessarily correlated with granule size. Acid hydrolysis of amaranth and quinoa starches was fast due to not only their small granule sizes but also the defects in the supramolecular structure, to which short external and internal chain lengths of amaranth and quinoa amylopectins contributed. By comparison, the granular architecture of taro starch granules was more stable partly due to the longer external chain length of taro amylopectin. Comparison of the molecular composition of branched subunits (released by using α-amylase of Bacillus amyloliquefaciens ) in amylopectins and that in lintnerized starches suggested a significant heterogeneous degradation of amaranth and quinoa starches at supramolecular levels.

Multigrain reconstituted rice, as a nutritious and convenient staple, holds considerable promise for the food industry. Furthermore, highland barley, corn, and other coarse cereals are distinguished by their low glycemic index (GI), rendering them effective in mitigating postprandial blood glucose levels, thereby underscoring their beneficial physiological impact. This study investigated the impact of extrusion temperature on the physicochemical properties, edible quality, and digestibility of multigrain reconstituted rice. The morphology revealed that starch particles that are not fully gelatinized in multigrain reconstituted rice are observed at an extrusion temperature range of 60 °C-90 °C. As the extrusion temperature increased, the degree of gelatinization (DG) increased, while the contents of water, protein, total starch, and amylopectin decreased substantially. Concurrently, the relative crystallinity, orderliness of starch, and heat absorption enthalpy (Δ H ) decreased significantly, and water absorption (WAI) and water solubility (WSI) increased markedly. Regarding edible quality, sensory evaluation displayed an initial increase followed by a decrease. In terms of digestibility, the estimated glycemic index (eGI) increased from 61.10 to 70.81, and the GI increased from 60.41 to 75.33. In addition, the DG was significantly correlated with both eGI ( r = 0.886**) and GI ( r = 0.947**). The results indicated that the ideal extrusion temperature for multigrain reconstituted rice was 90 °C. The findings underscored the pivotal role of optimal extrusion temperatures in the production of multigrain reconstituted rice, which features low GI and high nutritional quality.

The interaction mode between persimmon leaf polyphenols (PLP) and corn starch with different amylose content and its effect on starch digestibility was studied. Results of iodine binding test, TGA, and DSC revealed that PLP interacted with starch and reduced the iodine binding capacity and thermal stability of starch. High amylopectin corn starch (HAPS) interacted with PLP mainly via hydrogen bonds, since the FT-IR of HAPS-PLP complex showed higher intensity at 3400 cm -1 and an obvious shift of 21 cm -1 to shorter wavelength, and the chemical shifts of protons in 1 H NMR and the shift of C-6 peak in 13 C NMR of HAPS moved to low field with the addition of PLP. Results of 1 H NMR also showed the preferential formation of hydrogen bonds between PLP and OH-3 of HAPS. Different from HAPS, PLP formed V-type inclusion complex with high amylose corn starch (HAS) because XRD of HAS-PLP complex showed characteristic feature peaks of V-type inclusion complex and C-1 signal in 13 C NMR of PLP-complexed HAS shifted to low field. Interaction with PLP reduced starch digestibility and HAS-PLP complex resulted in more resistant starch production than HAPS-PLP complex. To complex PLP with starch might be a potential way to prepare functional starch with slower digestion., Competing Interests: Declaration of competing interest The authors declare that no conflicts of interests exist., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Yam is a dual-purpose crop as both medicine and food. However, the mechanism controlling the eating quality of yam remains to be elucidated. This study explored the influence of starch multiscale structure on the texture of yam. The results indicated that FS and RC yam have higher hardness and chewiness, while BZ, XM, and PL yam possess waxiness, Fineness, and Stickiness. Statistically, high amylose (AM) can increase hardness, chewiness, and compactness; and average molecular size (R h ) is positively correlated with stickiness, fineness, and waxiness. Specifically, medium- and long-chain amylose (1000 < X ≤ 10,000) and amylopectin (24 < X ≤ 100), particularly medium-chain amylose (1000 < X ≤ 5000) and long-chain amylopectin (24 < X ≤ 36), primarily affect sensory and rheological stickiness. The long chains of amylose form a straight chain interspersed in the crystalline and amorphous regions to support the entire lamellar structure. Higher proportion of amylose long chains, promoting the starch's structural rigidity, which in turn enhanced its hardness-related attributes. Moreover, a higher ratio of long chains within amylopectin results in tightly intertwined adjacent outer chains, forming double helix crystalline zones. This consequently augmenting the texture quality linked to stickiness-related attributes., Competing Interests: Declaration of competing interest We confirm that there are no any conflicts of interest with respect to this publication and there has been no financial support for this article that could influence the outcome., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Multiscale structure and digestive characteristic of starch during kernel development of Castanea henryi ('Jinzhui' (YS) and 'Baiyan No.1' (WS)) were investigated in this study. Structural analysis revealed that the surface of starch granules became smooth, the amylopectin content decreased (from 71.32 % to 70.47 %, from 71.44 % to 68.37 %, respectively), the chain length distribution of amylopectin reduced (the proportion of B1 chain decreased from 52.35 % to 50.60 %, from 52.22 % to 50.59 %, respectively) while the amorphous and semi-crystalline lamellae of starch increased during development, which was consistent with the decreasing relative crystallinity (from 28.79 % to 24.11 %, from 29.57 % to 23.66 %, respectively) and short-range ordering degree. The degradation of ordered structure further resulted in the increase of digestibility, especially in the late developmental stage, supported by a significant decrease of resistant starch content (from 70.21 % to 61.70 % and from 73.58 % to 58.86 %, respectively). Transcriptome analysis and RT-qPCR were performed to explore the possible molecular mechanisms affecting starch structure. The high expression of several key genes including AGPase, GBSS, SBE, SSS, ISA and PUL in late development stage might be the reason of structural changes during development. The results provided valuable information for starch accumulation during kernel development of Castanea henryi., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The processing quality of indica rice must undergo ripening after harvest to achieve stability and improvement. However, the mechanism underlying this process remains incompletely elucidated. Starch, the predominant component in indica rice, plays a crucial role in determining its properties. This study focused on analyzing the rheological properties and starch fine structure, as well as the related biosynthetic enzymes of indica rice during the after-ripening process. The results showed that after-ripened rice exhibited increased elastic modulus (G') and viscous modulus (G″), accompanied by a decrease in the loss tangent (Tan δ), indicating an enhancement in viscoelasticity and the gel network structure. Moreover, the proportions of amylopectin super long chains (DP 37-60) decreased, while those of medium chains (DP 13-24 and DP 25-36) or short chains (DP 6-12) of amylopectin increased. Additionally, the activities of starch branching enzyme (SBE) and starch debranching enzyme (DBE) declined over the after-ripening period. Pearson correlation analysis revealed that the rheological properties of after-ripened rice were correlated with the chain length distribution (CLD) of starch, which, in turn, was associated with its related endogenous enzymes. These findings provied new insights into understanding the quality changes of after-ripened indica rice., Competing Interests: Declaration of competing interest The authors declare no competing or associative commercial interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The impact of dual sequential modifications using radio-frequency (RF) plasma and electron beam irradiation (EBI) on starch properties was investigated and compared with single treatments within an irradiation dose range of 5-20 kGy. Regardless of sequence, dual treatments synergistically affected starch properties, increasing acidity, solubility, and paste clarity, while decreasing rheological features with increasing irradiation dose. The molecular weight distribution was also synergistically influenced. Amylopectin distribution broadened particularly below 10 kGy. Amylose narrowed its distribution across all irradiation doses. This was due to dominating EBI-induced degradation and molecular rearrangements from RF plasma. With the highest average radiation-chemical yield (G) and degradation rate constant (k) of (2.12 ± 0.14) × 10 -6  mol·J -1 and (3.43 ± 0.23) × 10 -4  kGy -1 , respectively, upon RF plasma pre-treatment, amylose underwent random chain scission. In comparison to single treatments, dual modification caused minor alterations in spectral characteristics and crystal short-range order structure, along with increased granule aggregation and surface irregularities. The synergistic effect was dose-dependent, significant up to 10 kGy, irrespective of treatment sequence. The highest synergistic ratio was observed when RF plasma preceded irradiation, demonstrating the superior efficiency of plasma pre-treatment in combination with EBI. This synergy has the potential to lower costs and extend starch's technological uses by enhancing radiation sensitivity and reducing the irradiation dose., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

In this study, waxy corn starch (WCS) was modified by amylosucrase and pullulanase, producing linear starch chains with elongated length that favored the complexation with unsaturated fatty acids (uFAs). Compared to native WCS, the amylosucrase-modified WCS with an average chain length of 47.8 was easier to form V-type complexes with oleic acid, while increasing the degree of unsaturation impeded the formation of V-type complexes. The pullulanase treatment hydrolyzed the branching points of amylosucrase-modified WCS and the linear starch chains could forme V-type complexes with oleic acid, linoleic acid, and linolenic acid, with V-type crystallinity decreasing from 38.2 % to 20.1 %. V-type complexes had a lower thermal stability than the B-type starch crystallites, and their peak melting temperature ranged from 67.2 to 79.0 °C. The content of resistant starch in the complexes was in the range of 21.8 %-40.9 % and the formation of V-type complexes decreased the susceptibility of uFAs to oxygen., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

V-type granular starches (VGSs) were prepared via an ethanol-alkaline (EA) method using maize starch with different amylose contents, specifically, high amylose (HAM), normal maize starch (MS), and waxy maize starch (WS). The X-ray diffraction pattern of the native starch was completely transformed into a V-type pattern after the EA treatment, indicating a structural change in the starch granules. The VGSs prepared by HAM had highest relative crystallinity (31.8°), while the VGSs prepared by WS showed amorphous diffraction pattern. Excessive NaOH, however, would disrupt the formation of V-type structures and cause granular shape rupture. The quantity of double-helical structures, particularly those formed by amylopectin at the starch granules' periphery, significantly decreased. Conversely, single-helical structures formed by amylose increased. A notable rise in the relative crystallinity of V crystals. Four VGS samples, characterized by granular integrity, were chosen for the next investigation of physicochemical and digestive properties. VGS prepared from HAM exhibited higher granular integrity, lower cold-water swelling extent (59.0 and 161.0 cP), improved thermal stability (the value of breakdown as lower as 57.67 and 186.67 cP), and higher resistance to digestion (RS content was up to 10.38 % and 9.00 % higher than 5.86 % and 5.66 % of VGS prepared from WS and MS). The results confirmed that amylose content has a substantial impact on the microstructural and physicochemical properties of VGSs., Competing Interests: Declaration of competing interest There are no conflicts to declare., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The objective of this study was to compare the structural and functional attributes of Chinese yam starches obtained via different domestic cooking methods. Cooking changed the crystalline type from the C type to the CB type, and disrupted the short- and long-range molecular order of Chinese yam starch. The average chain length of amylopectin in BOS (boiling starch) was the smallest at 22.78, while RWS had the longest average chain length, reaching 24.24. These alterations in molecular structure resulted in variations in functional properties such as solubility, swelling power (SP), pasting characteristics, and rheological properties. Among these alterations, boiling was the most effective method for increasing the water-binding capacity and SP of starch. Specifically, its water holding capacity was 2.12 times that of RWS. In vitro digestion experiments indicated that BOS has a higher digestion rate (k = 0.0272 min -1 ) and lower RDS (rapidly digestible starch), which may be related to its amylopectin chain length distribution. This study can guide us to utilize yam starch through suitable cooking methods, which is relevant for the processing and application of Chinese yam starch., Competing Interests: Declaration of competing interest The authors have no conflicts of interest., (Copyright © 2024. Published by Elsevier B.V.)