Search

It is well established that the lack of understanding the crystallization process in two-step sequential deposition has a direct impact on efficiency, stability and reproducibility of perovskite solar cells. Here, we try to understand the solid-solid phase transition occuring during two-step sequential deposition of methylammonium lead iodide and formamidinium lead iodide. Using metadynamics, X-ray diffraction and Raman spectroscopy, we reveal the microscopic details of this process. We find that the formation of perovskite proceeds through intermediate structures and report polymorphs found for methylammonium lead iodide and formamidinium lead iodide. From simulations, we discover a possible crystallization pathway for the highly efficient metastable α-phase of formamidinium lead iodide. Guided by these simulations, we perform experiments that results in the room temperature crystallization of α-formamidinium lead iodide.

It is well established that the lack of understanding the crystallization process in two-step sequential deposition has a direct impact on efficiency, stability and reproducibility of perovskite solar cells. Here, we try to understand the solid-solid phase transition occuring during two-step sequential deposition of methylammonium lead iodide and formamidinium lead iodide. Using metadynamics, X-ray diffraction and Raman spectroscopy, we reveal the microscopic details of this process. We find that the formation of perovskite proceeds through intermediate structures and report polymorphs found for methylammonium lead iodide and formamidinium lead iodide. From simulations, we discover a possible crystallization pathway for the highly efficient metastable α-phase of formamidinium lead iodide. Guided by these simulations, we perform experiments that results in the room temperature crystallization of α-formamidinium lead iodide.

Although large research efforts have been devoted to photoelectrochemical (PEC) water splitting in the past several decades, the lack of efficient, stable and Earth-abundant photoelectrodes remains a bottleneck for practical application. Here, we report a photocathode with a coaxial nanowire structure implementing a Cu2O/Ga2O3-buried p–n junction that achieves efficient light harvesting across the whole visible region to over 600 nm, reaching an external quantum yield for hydrogen generation close to 80%. With a photocurrent onset over +1 V against the reversible hydrogen electrode and a photocurrent density of ~10 mA cm−2 at 0 V versus the reversible hydrogen electrode, our electrode constitutes the best oxide photocathode for catalytic generation of hydrogen from sunlight known today. Conformal coating via atomic-layer deposition of a TiO2 protection layer enables stable operation exceeding 100 h. Using NiMo as the hydrogen evolution catalyst, an all Earth-abundant Cu2O photocathode was achieved with stable operation in a weak alkaline electrolyte. To show the practical impact of this photocathode, we constructed an all-oxide unassisted solar water splitting tandem device using state-of-the-art BiVO4 as the photoanode, achieving ~3% solar-to-hydrogen conversion efficiency. The generation of hydrogen fuel from water and visible light requires photoelectrodes that are inexpensive, stable and highly active. Now, Luo, Gratzel and co-workers report Cu2O photocathodes that reach these goals. Incorporation into an unassisted solar water splitting device gives ~3% solar-to-hydrogen conversion efficiency.

Dion-Jacobson (DJ) iodoplumbates based on 1,4-phenylenedimethanammonium (PDMA) have recently emerged as promising light absorbers for perovskite solar cells. While PDMA is one of the simplest aromatic spacers potentially capable of forming a DJ structure based on (PDMA)An-1 Pbn I3n+1 composition, the crystallographic proof has not been reported so far. Single crystal structure of a DJ phase based on PDMA is presented and high-field solid-state NMR spectroscopy is used to characterize the structure of PDMA-based iodoplumbates prepared as thin films and bulk microcrystalline powders. It is shown that their atomic-level structure does not depend on the method of synthesis and that it is ordered and similar for all iodoplumbate homologues. Moreover, the presence of lower (n) homologues in thin films is identified through UV-Vis spectroscopy, photoluminescence spectroscopy, and X-ray diffraction measurements, complemented by cathodoluminescence mapping. A closer look using cathodoluminescence shows that the micron-scale microstructure corresponds to a mixture of different layered homologues that are well distributed throughout the film and the presence of layer edge states which dominate the emission. This work therefore determines the formation of DJ phases based on PDMA as the spacer cation and reveals their properties on a multi-length scale, which is relevant for their application in optoelectronics.

There has been an ongoing effort to overcome the limitations associated with the stability of hybrid organic-inorganic perovskite solar cells by using different organic agents as additives to the perovskite formulations. The functionality of organic additives has been predominantly limited to exploiting hydrogen-bonding interactions, while the relevant atomic-level binding modes remain elusive. Herein, we introduce a bifunctional supramolecular modulator, 1,2,4,5-tetrafluoro-3,6-diiodobenzene, which interacts with the surface of the triple-cation double-halide perovskite material via halogen bonding. We elucidate its binding mode using two-dimensional solid-state

Layered hybrid perovskites comprising adamantyl spacer (A) cations based on the A2FAn−1PbnI3n+1(n= 1-3, FA = formamidinium) compositions have recently been shown to act as promising materials for photovoltaic applications. While the corresponding perovskite solar cells show performances and stabilities that are superior in comparison to other layered two-dimensional formamidinium-based perovskite solar cells, the underlying reasons for their behaviour are not well understood. We provide a comprehensive investigation of the structural and photophysical properties of this unique class of materials, which is complemented by theoretical analysisviamolecular dynamics simulations and density functional theory calculations. We demonstrate the formation of well-defined structures of lower compositional representatives based onn= 1-2 formulations with (1-adamantyl)methanammonium spacer moieties, whereas higher compositional representatives (n> 2) are shown to consist of mixtures of low-dimensional phases evidenced by grazing incidence X-ray scattering. Furthermore, we reveal high photoconductivities of the corresponding hybrid perovskite materials, which is accompanied by long charge carrier lifetimes. This study thereby unravels features that are relevant for the performance of FA-based low-dimensional hybrid perovskites.

Layered hybrid perovskites have emerged as a promising alternative to stabilizing hybrid organic–inorganic perovskite materials, which are predominantly based on Ruddlesden-Popper structures. Formamidinium (FA)-based Dion-Jacobson perovskite analogs are developed that feature bifunctional organic spacers separating the hybrid perovskite slabs by introducing 1,4-phenylenedimethanammonium (PDMA) organic moieties. While these materials demonstrate competitive performances as compared to other FA-based low-dimensional perovskite solar cells, the underlying mechanisms for this behavior remain elusive. Here, the structural complexity and optoelectronic properties of materials featuring (PDMA)FAn–1PbnI3n+1 (n = 1–3) formulations are unraveled using a combination of techniques, including X-ray scattering measurements in conjunction with molecular dynamics simulations and density functional theory calculations. While theoretical calculations suggest that layered Dion-Jacobson perovskite structures are more prominent with the increasing number of inorganic layers (n), this is accompanied with an increase in formation energies that render n > 2 compositions difficult to obtain, in accordance with the experimental evidence. Moreover, the underlying intermolecular interactions and their templating effects on the Dion-Jacobson structure are elucidated, defining the optoelectronic properties. Consequently, despite the challenge to obtain phase-pure n > 1 compositions, time-resolved microwave conductivity measurements reveal high photoconductivities and long charge carrier lifetimes. This comprehensive analysis thereby reveals critical features for advancing layered hybrid perovskite optoelectronics.

There has been an ongoing effort to overcome the limitations associated with the stability of hybrid organic–inorganic perovskite solar cells by using different organic agents as additives to the perovskite formulations. The functionality of organic additives has been predominantly limited to exploiting hydrogen-bonding interactions, while the relevant atomic-level binding modes remain elusive. Herein, we introduce a bifunctional supramolecular modulator, 1,2,4,5-tetrafluoro-3,6-diiodobenzene, which interacts with the surface of the triple-cation double-halide perovskite material via halogen bonding. We elucidate its binding mode using two-dimensional solid-state 19F NMR spectroscopy in conjunction with density functional theory calculations. As a result, we demonstrate a stability enhancement of the perovskite solar cells upon supramolecular modulation, without compromising the photovoltaic performances.

It is well established that the lack of understanding the crystallization process in a two-step sequential deposition has a direct impact on efficiency, stability, and reproducibility of perovskite solar cells. Here, we try to understand the solid-solid phase transition occurring during the two-step sequential deposition of methylammonium lead iodide and formamidinium lead iodide. Using metadynamics, x-ray diffraction, and Raman spectroscopy, we reveal the microscopic details of this process. We find that the formation of perovskite proceeds through intermediate structures and report polymorphs found for methylammonium lead iodide and formamidinium lead iodide. From simulations, we discover a possible crystallization pathway for the highly efficient metastable α phase of formamidinium lead iodide. Guided by these simulations, we perform experiments that result in the low-temperature crystallization of phase-pure α-formamidinium lead iodide., Science Advances, 7 (17), ISSN:2375-2548

A series of [60]fullerenes covalently functionalized with the polymer poly(ethylene glycol) is presented. These new [60]fullerene-based materials have been incorporated as additives in CH3 NH3 PbI3 (MAPbI3 ), the most common organic-inorganic perovskite used in perovskite solar cells. The extensive photovoltaic study performed by using these materials shows several beneficial effects on the performance of these cells, including a reduction in hysteresis and an increased stability against moisture, whereby the solar cells retain up to 97 % of their initial power conversion efficiency in an ambient atmosphere.

The achievement of high efficiency and high stability in perovskite solar cells (PSCs) requires optimal selection and evaluation of the various components. After a brief introduction to the perovskite materials and their historical evolution, the first part is devoted to the hole transporting material (HTM), between photoelectrode and dark counter electrode. The basic requirements for an efficient HTM are stated. Subsequently, the most used HTM, spiro-OMeTAD, is compared to alternative HTMs, both small-molecule size species and electronically conducting polymers. The second part is devoted to additives related to the performance of the perovskite light-absorbing material itself. These are related either to the modification of the composition of the material itself or to the optimization of the morphology during the perovskite preparation stage, and their effect is in the enhancement of the power conversion efficiency, the long-term stability, or the reproducibility of the properties of the PSCs. Finally, a number of spectroscopic methods based on the UV-Vis part of the electromagnetic spectrum useful for characterizing the different perovskite material types are described in the last part of this review.

Optimizing the morphology of metal halide perovskite films is an important way to improve the performance of solar cells(1) when these materials are used as light harvesters(2), because film homogeneity is correlated with photovoltaic performance(3). Many device architectures and processing techniques have been explored with the aim of achieving high-performance devices(4), including single-step deposition(5), sequential deposition(6,7) and anti-solvent methods(1,8). Earlier studies have looked at the influence of reaction conditions on film quality(3), such as the concentration of the reactants9,10 and the reaction temperature(11). However, the precise mechanism of the reaction and the main factors that govern it are poorly understood. The consequent lack of control is the main reason for the large variability observed in perovskite morphology and the related solar-cell performance(2,3). Here we show that light has a strong influence on the rate of perovskite formation and on film morphology in both of the main deposition methods currently used: sequential deposition and the anti-solvent method. We study the reaction of a metal halide (lead iodide) with an organic compound (methylammonium iodide) using confocal laser scanning fluorescence microscopy and scanning electron microscopy. The lead iodide crystallizes before the intercalation of methylammonium iodide commences, producing the methylammonium lead iodide perovskite. We find that the formation of perovskite via such a sequential deposition is much accelerated by light. The influence of light on morphology is reflected in a doubling of solar-cell efficiency. Conversely, using the anti-solvent method to form methyl ammonium lead iodide perovskite in a single step from the same starting materials, we find that the best photovoltaic performance is obtained when films are produced in the dark. The discovery of light-activated crystallization not only identifies a previously unknown source of variability in opto-electronic properties, but also opens up new ways of tuning morphology and structuring perovskites for various applications.

Perovskite solar cells have recently reached staggering efficiencies, through efforts focused on reducing grain boundaries, by enlarging the size of the crystalline domains that constitute the perovskite films. Here, we demonstrate that smaller crystallites within perovskite films spontaneously coalesce into larger ones, even when complete devices are stored in the dark at room temperature. We show that crystal coalescence greatly improves the performance of state-of-the-art perovskite solar cells. Our results reveal the dynamic nature of the morphology of perovskite films and highlight the crucial role that coalescence plays in producing highly efficient devices.

Solid-state dye-sensitized solar cells currently suffer from issues such as inadequate nanopore filling, low conductivity and crystallization of hole-transport materials infiltrated in the mesoscopic TiO2 scaffolds, leading to low performances. Here we report a record 11% stable solid-state dye-sensitized solar cell under standard air mass 1.5 global using a hole-transport material composed of a blend of [Cu (4,4′,6,6′-tetramethyl-2,2′-bipyridine)2](bis(trifluoromethylsulfonyl)imide)2 and [Cu (4,4′,6,6′-tetramethyl-2,2′-bipyridine)2](bis(trifluoromethylsulfonyl)imide). The amorphous Cu(II/I) conductors that conduct holes by rapid hopping infiltrated in a 6.5 μm-thick mesoscopic TiO2 scaffold are crucial for achieving such high efficiency. Using time-resolved laser photolysis, we determine the time constants for electron injection from the photoexcited sensitizers Y123 into the TiO2 and regeneration of the Y123 by Cu(I) to be 25 ps and 3.2 μs, respectively. Our work will foster the development of low-cost solid-state photovoltaic based on transition metal complexes as hole conductors., Inadequate pore infiltration and low conductivity of hole transporter materials limit the performance of solid-state dye-sensitized solar cells. Using fast charge-exchange Cu(II/I) complexes as part of the hole transporting material, Cao et al. overcome these issues to achieve a record photoconversion efficiency of 11%.

Chitosan being a biodegradable material would be an eco-friendly and effective alternative in the cleaning up of oil spills. In the present study, adsorbent (Chitosan) was prepared from the seafood industry waste, prawn shells for removal of oil from aqueous solution. Batch experiments were carried out to study the kinetics for the removal of oil from oil–water solutions using chitosan. The effect of various influencing parameters such as contact time, pH, initial concentration, and mass of adsorbent were studied. The equilibrium time for adsorption of oil on chitosan was obtained as 6 min. The maximum capacity of chitosan to adsorb oil from oil–water solution was found to be 17.96 g g−1 of adsorbent. The removal efficiency was observed to be higher in the acidic medium. The adsorption properties of chitosan have been attributed mainly to its positive charge. The equilibrium data was tested with the Langmuir isotherm and excellent correlation was obtained.

The global demand for energy is growing and conventional energy sources like coal and petroleum are depleting, and renewable resources will play a crucial role in the future. The development of clean and sustainable energy technology is imperative to avert the impending climatic crisis. A worthy investment option is concentrating solar power (CSP) technology which has the capacity to provide for about 7% of the total electricity needs projected for the world by 2030 and 25% by 2050 (considering a high-energy-saving, high-energy-efficiency scenario) [1] . In the present study, the various concentrators available have been explored. Countries all over the world have recognized the potential for CSP and numerous plants are being planned and constructed with incentives offered by the governments. In India, the states of Rajasthan and Gujarat have the potential for widespread application of CSP technology to harness the solar resource. The launch of The Jawaharlal Nehru National Solar Mission (JNNSM) in 2008 by the Indian Government and its initiatives, complemented by state solar policy passed by the states of Rajasthan and Gujarat, will go a long way in the establishment of CSP to supply a segment of India's upcoming energy needs.

Improving the stability of perovskite solar cells Inorganic-organic perovskite solar cells have poor long-term stability because ultraviolet light and humidity degrade these materials. Bella et al. show that coating the cells with a water-proof fluorinated polymer that contains pigments to absorb ultraviolet light and re-emit it in the visible range can boost cell efficiency and limit photodegradation. The performance and stability of inorganic-organic perovskite solar cells are also limited by the size of the cations required for forming a correct lattice. Saliba et al. show that the rubidium cation, which is too small to form a perovskite by itself, can form a lattice with cesium and organic cations. Solar cells based on these materials have efficiencies exceeding 20% for over 500 hours if given environmental protection by a polymer coating. Science , this issue pp. 203 and 206

Three-dimensional (3D) perovskite materials display remarkable potential in photovoltaics owing to their superior solar-to-electric power conversion efficiency, with current efforts focused on improving stability. Two-dimensional (2D) perovskite analogues feature greater stability toward environmental factors, such as moisture, owing to a hydrophobic organic cation that acts as a spacer between the inorganic layers, which offers a significant advantage over their comparatively less stable 3D analogues. Here, we demonstrate the first example of a formamidinium (FA) containing Dion Jacobson 2D perovskite material characterized by the BFA(n-1)Pb(n)I(3n+1) formulation through employing a novel bifunctional organic spacer (B), namely 1,4-phenyl-enedimethanammonium (PDMA). We achieve remarkable efficiencies exceeding 7% for (PDMA)-FA(2)Pb(3)I(10) based 2D perovskite solar cells resisting degradation when exposed to humid ambient air, which opens up new avenues in the design of stable perovskite materials.

Comprehensive study of perovskite film formation reveals the stages of the reaction and identifies a suitable kinetic model., Sequential deposition has been extensively used for the fabrication of perovskite solar cells. Nevertheless, fundamental aspects of the kinetics of methylammonium lead iodide perovskite formation remain obscure. We scrutinize the individual stages of the reaction and investigate the crystallization of the lead iodide film, which occurs before the intercalation of methylammonium iodide commences. Our study identifies the presence of mixed crystalline aggregates composed of perovskite and lead iodide during intercalation and structural reorganization. Furthermore, Ostwald ripening occurs in the film for reaction times beyond the point of conversion to perovskite. Using cross-sectional confocal laser scanning microscopy for the first time, we reveal that lead iodide in the over-layer and at the bottom of the mesoporous layer converts first. We identify unreacted lead iodide trapped in the mesoporous layer for samples of complete conversion. We acquire kinetic data by varying different parameters and find that the Avrami models best represent them. The model facilitates the rapid estimation of the reaction time for complete conversion for a variety of reaction conditions, thereby ascertaining a major factor previously determined by extensive experimentation. This comprehensive picture of the sequential deposition is essential for control over the perovskite film quality, which determines solar cell efficiency. Our results provide key insights to realize high-quality perovskite films for optoelectronic applications.

Formamidinium (FA) lead iodide perovskite materials feature promising photovoltaic performances and superior thermal stabilities. However, conversion of the perovskite α-FAPbI3 phase to the thermodynamically stable yet photovoltaically inactive δ-FAPbI3 phase compromises the photovoltaic performance. A strategy is presented to address this challenge by using low-dimensional hybrid perovskite materials comprising guaninium (G) organic spacer layers that act as stabilizers of the three-dimensional α-FAPbI3 phase. The underlying mode of interaction at the atomic level is unraveled by means of solid-state nuclear magnetic resonance spectroscopy, X-ray crystallography, transmission electron microscopy, molecular dynamics simulations, and DFT calculations. Low-dimensional-phase-containing hybrid FAPbI3 perovskite solar cells are obtained with improved performance and enhanced long-term stability.

This is the peer reviewed version which has been published in final form at https://doi.org/10.1002/anie.202106394. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions., A comprehensive picture explaining the effect of the crystal size in metal halide perovskite films on their opto-electronic characteristics is currently lacking. We report that perovskite nanocrystallites exhibit a wider band gap due to concurrent quantum confinement and size dependent structural effects, with the latter being remarkably distinct and attributed to the perturbation from the surface of the nanocrystallites affecting the structure of their core. This phenomenon might assist in the photo-induced charge separation within the perovskite in devices employing mesoporous layers as they restrict the size of nanocrystallites present in them. We demonstrate that the crystal size effect is widely applicable as it is ubiquitous in different compositions and deposition methods employed in the fabrication of state-of-the-art perovskite solar cells. This effect is a convenient and effective way to tune the band gap of perovskites, thus shedding light on the path forward for the design of perovskite opto-electronic devices.