Search

The herbicides that inhibit 4-hydroxyphenylpyruvate dioxygenase (HPPD) are primarily used for weed control in corn, barley, oat, rice, sorghum, sugarcane, and wheat production fields in the United States. The objectives of this review were to summarize 1) the history of HPPD-inhibitor herbicides and their use in the United States; 2) HPPD-inhibitor resistant weeds, their mechanism of resistance, and management; 3) interaction of HPPD-inhibitor herbicides with other herbicides; and 4) the future of HPPD-inhibitor-resistant crops. As of 2022, three broadleaf weeds (Palmer amaranth, waterhemp, and wild radish) have evolved resistance to the HPPD inhibitor. The predominance of metabolic resistance to HPPD inhibitor was found in aforementioned three weed species. Management of HPPD-inhibitor-resistant weeds can be accomplished using alternate herbicides such as glyphosate, glufosinate, 2,4-D, or dicamba; however, metabolic resistance poses a serious challenge, because the weeds may be cross-resistant to other herbicide sites of action, leading to limited herbicide options. An HPPD-inhibitor herbicide is commonly applied with a photosystem II (PS II) inhibitor to increase efficacy and weed control spectrum. The synergism with an HPPD inhibitor arises from depletion of plastoquinones, which allows increased binding of a PS II inhibitor to the D1 protein. New HPPD inhibitors from the azole carboxamides class are in development and expected to be available in the near future. HPPD-inhibitor-resistant crops have been developed through overexpression of a resistant bacterial HPPD enzyme in plants and the overexpression of transgenes for HPPD and a microbial gene that enhances the production of the HPPD substrate. Isoxaflutole-resistant soybean is commercially available, and it is expected that soybean resistant to other HPPD inhibitor herbicides such as mesotrione, stacked with resistance to other herbicides, will be available in the near future.

Weeds compete with crops for soil moisture, along with other resources, which can impact the germination, growth, and seed production of weeds; however, this impact has not been systematically recorded and synthesized across diverse studies. To address this knowledge gap, a global meta-analysis was conducted using 1,196 paired observations from 86 published articles assessing the effect of water stress on weed germination, growth characteristics, and seed production. These studies were conducted and published during 1970 through 2020 across four continents (Asia, Australia, Europe, and North America). Imposed water stress was expressed as solution osmotic potential (ψsolution), soil water potential (ψsoil), or soil moisture as percent field capacity. Meta-analysis revealed that water stress inhibits weed germination, growth, and seed production, and the quantitative response intensified with increasing water stress. A ψsolution greater than −0.8 MPa completely inhibits germination of both grass and broadleaf weeds. A ψsolution from −0.09 to −0.32 MPa reduces weed germination by 50% compared with the unstressed condition. Moderate soil water stress, equivalent to 30% to 60% field capacity, inhibits growth characteristics (branches or tillers per plant, leaf area, leaves per plant, plant height, root, and shoot biomass) by 33% and weed seed production by 50%. Severe soil water stress, below 30% field capacity, inhibits weed growth by 51% and seed production by 88%. Although water stress inhibits weed growth, it does not entirely suppress the ability to germinate, grow, and produce seeds, resulting in weed seedbank accumulation. This creates management challenges for producers, because weed seeds can survive in the soil for many years, depending on weed species and environmental conditions. Quantitative information compiled in this meta-analysis can be instrumental to model the weeds’ multidimensional responses to water stress and designing integrated weed management strategies for reducing the weed seedbank.

Herbicide-resistant Palmer amaranth is a troublesome weed in several agronomic crops and is a relatively new challenge to dry bean production in western Nebraska. Objectives were to evaluate preemergence (PRE) and postemergence (POST) herbicides for control of acetolactate synthase–resistant Palmer amaranth and their effect on Palmer amaranth density and biomass as well as dry bean injury and yield in western Nebraska. Field experiments were conducted in 2017 and 2019 near Scottsbluff, NE. The experiments were arranged as a two-factor strip-plot design. The strip-plot factor consisted of no-PRE or pendimethalin (1,070 g ai ha–1) + dimethenamid-P (790 g ai h–1) applied PRE. The main-plot factor was POST herbicides, which consisted of various mixtures of imazamox, bentazon, or fomesafen applied in a single or sequential application at labeled rates, and reduced rates of imazamox (9 g ai ha–1) + bentazon (314 g ai ha–1) + fomesafen (70 g ai ha–1) applied in single or sequential (two or three) applications. PRE herbicides reduced Palmer amaranth density and biomass during both years and increased dry bean yield in 2017. POST treatments containing fomesafen improved Palmer amaranth control compared with treatments containing imazamox and bentazon only. The sequential-application reduced-rate POST system did not improve Palmer amaranth control compared to one POST application containing fomesafen at a labeled rate in either year. Using pendimethalin + dimethenamid-P PRE followed by POST treatments containing imazamox + bentazon + fomesafen at a labeled rate provided 86% and 99% Palmer amaranth control in 2017 and 2019, respectively.

Velvetleaf (Abutilon theophrasti Medik.) is a troublesome broadleaf weed that competes with crops for resources such as soil moisture. Water stress can affect the ability of weed species to grow and produce seeds. The objective of this study was to determine the effect of degree of water stress on the growth and fecundity of A. threophrasti using soil moisture sensors under greenhouse conditions. Abutilon threophrasti seeds collected from a corn (Zea mays L.)–soybean [Glycine max (L.) Merr.] field were grown in silty clay loam soil, and plants were maintained at 100%, 75%, 50%, and 25% soil field capacity (FC) corresponding to no, light, moderate, and high water-stress conditions, respectively. Water was added daily to pots based on soil moisture levels detected by a Meter Group 5TM sensor to maintain the desired water-stress level required by treatment. Plants maintained at 100% FC had the maximum number of leaves (28 leaves plant−1), followed by 21 and 15 leaves plant−1 at 75% and 50% FC, respectively. Abutilon threophrasti at 100% and 75% FC achieved maximum plant height (108 to 123 cm) compared with 83 cm at 50% FC. Abutilon threophrasti maintained at 75% FC had the greatest growth index (79,907 cm3) followed by 72,197 cm3 at 100% FC and 64,256 cm3 at 50% FC. Seed production was similar at 100%, 75%, and 50% FC (288 to 453 seeds plant−1) compared with 2 seeds plant−1 at 25% FC. This is because the majority of plants maintained at 25% FC did not survive more than 77 d after transplanting. Seed germination was 96% to 100% at 100%, 75%, and 50% FC compared with 20% germination at 25% FC. Abutilon threophrasti can survive ≥50% FC continuous water-stress conditions, although with reduced leaf number, plant height, and growth index compared with 75% and 100% FC.

Biotypes of Palmer amaranth that are resistant to acetolactate synthase (ALS) inhibitor are becoming widespread in western Nebraska. There are limited effective postemergence (POST) herbicides labeled for ALS-inhibitor-resistant Palmer amaranth control in dry edible bean. The objective of this study was to evaluate the efficacy of dimethenamid-Pin a sequential preemergence (PRE) fb followed by (fb) POST program at two POST application timings, the first and third trifoliate stages (V1 and V3, respectively), for controlling ALS-inhibitor-resistant Palmer amaranth in dry edible bean. A field study was conducted in 2019, 2020, and 2021 in Scottsbluff, NE. PRE-alone applications of pendimethalin + dimethenamid-Pprovided inconsistent Palmer amaranth control. Dimethenamid-Papplied POST following a PRE application of pendimethalin + dimethenamid-Pprovided effective (>90%) Palmer amaranth control at 4 wk after V3 only at the V1 application timing in 2019. In 2020 and 2021 dimethenamid-Papplied POST at V1 and V3 following a PRE application of pendimethalin + dimethenamid-Pprovided 99% and 98% Palmer amaranth control at 4 wk after V3, and 98% and 94% Palmer amaranth control at harvest, respectively. Palmer amaranth biomass was reduced by 95% to 99% and by 96% to 98% compared with the -nontreated control when dimethenamid-Pwas applied POST at V1 and V3, respectively, following a PRE application of pendimethalin + dimethenamid-Pin 2020 and 2021. Application of a mixture of dimethenamid-Pwith imazamox + bentazon POST provided similar results to those of the fomesafen-containing treatments and dimethenamid-Palone POST. Dimethenamid-Papplied POST following a PRE application of pendimethalin + dimethenamid-Presulted in similar yield as the fomesafen-containing treatments. If fomesafen is not an option due to the crop rotation interval restriction, using dimethenamid-Pin a sequential PRE fb POST program is the only effective alternative to control ALS-inhibitor–resistant Palmer amaranth in Nebraska. The use of dimethenamid-Pin a sequential PRE fb POST program, alone or mixed with foliar-active herbicides should be considered by dry edible bean growers who are dealing with ALS-inhibitor-resistant Palmer amaranth.

Although Palmer amaranth is currently not widespread in most dry edible bean−producing states in the United States, it is widespread in western Nebraska, a major dry edible bean−producing region. There is currently a lack of research on management and biology of Palmer amaranth within dry edible bean production. The objective of this study was to quantify the impact of season-long Palmer amaranth interference on yield of dry edible bean and seed production of Palmer amaranth. A field study was conducted in Scottsbluff, NE, in 2020 and 2021. Palmer amaranth interference at densities of 0, 0.2, 0.3, 0.5, 1, and 2 plants m−1row of dry edible bean was evaluated. Palmer amaranth interference reduced dry edible bean yield by 77% at a weed density of 2 plants m−1row compared to the weed-free control, and a 5% yield reduction threshold was estimated to occur at a Palmer amaranth density of 0.02 plants m−1row. Yield reduction occurred primarily through a reduction in the number of pods per plant as Palmer amaranth density increased. Palmer amaranth plants produced 91,000 to 376,000 seeds per plant depending on densities, and as many as 140,000 seeds m−2. Study results will help farmers and other stakeholders estimate Palmer amaranth interference within their fields, and may help justify the economic cost of incorporating additional Palmer amaranth management practices.

Late-emerging summer annual weeds are difficult to control in dry bean production fields. Dry bean is a poor competitor with weeds, due to its slow rate of growth and delayed canopy formation. Palmer amaranth is particularly difficult to control due to season-long emergence and resistance to acetolactate synthase (ALS)-inhibiting herbicides. Dry bean growers rely on PPI and preemergence residual herbicides for the foundation of their weed control programs; however, postemergence herbicides are often needed for season-long weed control. The objective of this experiment was to evaluate effect of planting date and herbicide program on late-season weed control in dry bean in western Nebraska. Field experiments were conducted in 2017 and 2018 near Scottsbluff, NE. The experiment was arranged in a split-plot design, with planting date and herbicide program as main-plot and subplot factors, respectively. Delayed planting was represented by a delay of 15 d after standard planting time. The treatments EPTC + ethalfluralin, EPTC + ethalfluralin followed by (fb) imazamox + bentazon, and pendimethalin + dimethenamid-P fb imazamox + bentazon, resulted in the lowest Palmer amaranth density at 3 wk after treatment and the highest dry bean yield. The imazamox + bentazon treatment provided poor Palmer amaranth control and did not consistently result in Palmer amaranth density and biomass reduction compared with the nontreated control. In 2018, the delayed planting treatment had reduced Palmer amaranth biomass with the pendimethalin + dimethenamid-P treatment, as compared with standard planting. Delaying planting did not reduce dry bean yield and had limited benefit in improving weed control in dry bean.

The objective of this paper was to review the reproductive biology, herbicide-resistant (HR) biotypes, pollen-mediated gene flow (PMGF), and potential for transfer of alleles from HR to herbicide-susceptible grass weeds including barnyardgrass, creeping bentgrass, Italian ryegrass, johnsongrass, rigid (annual) ryegrass, and wild oats. The widespread occurrence of HR grass weeds is at least partly due to PMGF, particularly in obligate outcrossing species such as rigid ryegrass. Creeping bentgrass, a wind-pollinated turfgrass species, can efficiently disseminate herbicide resistance alleles via PMGF and movement of seeds and stolons. The genus Agrostis contains about 200 species, many of which are sexually compatible and produce naturally occurring hybrids and hybrids with species in the genus Polypogon. The self-incompatibility, extremely high outcrossing rate, and wind pollination in Italian ryegrass clearly point to PMGF as a major mechanism by which herbicide resistance alleles can spread across agricultural landscapes, resulting in abundant genetic variation within populations and low genetic differentiation among populations. Italian ryegrass can readily hybridize with perennial ryegrass and rigid ryegrass due to their similarity in chromosome numbers (2n = 14), resulting in interspecific gene exchange. Johnsongrass, barnyardgrass, and wild oats are self-pollinated species, so the potential for PMGF is relatively low and limited to short distances; however, seeds can easily shatter upon maturity before crop harvest, leading to wider dispersal. The occurrence of PMGF in reviewed grass weed species, even at a low rate, is greater than that of spontaneous mutations conferring herbicide resistance in weeds and thus can contribute to the spread of herbicide resistance alleles. This review indicates that the transfer of herbicide resistance alleles occurs under field conditions at varying levels depending on the grass weed species.

Glyphosate is the most widely used herbicide in the United States; however, concern is escalating about increasing residues of glyphosate and its metabolite aminomethylphosphonic acid (AMPA) in soil. There is a lack of scientific literature examining the response of cover crops to soil residues of glyphosate or AMPA. The objectives of this study were to evaluate the impact of glyphosate or AMPA residues in silty clay loam soil on emergence, growth, and biomass of cover crops, including cereal rye, crimson clover, field pea, hairy vetch, and winter wheat, as well as their germination in a 0.07% (0.7 g L–1) solution of AMPA or glyphosate. Greenhouse studies were conducted at the University of Nebraska–Lincoln to determine the dose response of broadleaf and grass cover crops to soil-applied glyphosate or AMPA. The results indicated that soil treated with glyphosate or AMPA up to 105 mg ae kg–1 of soil had no effect on the emergence, growth, above-ground biomass, and root biomass of any of the cover crop species tested. To evaluate the impact of AMPA or glyphosate on the seed germination of cover crop species, seeds were soaked in Petri plates filled with a 0.7 g L–1 solution of AMPA or glyphosate. There was no effect of AMPA on seed germination of any of the cover crop species tested. Seed germination of crimson clover and field pea in a 0.7 g L–1 solution of glyphosate was comparable to the nontreated control; however, the germination of cereal rye, hairy vetch, and winter wheat was reduced by 48%, 75%, and 66%, respectively, compared to the nontreated control. The results suggested that glyphosate or AMPA up to 105 mg ae kg–1 in silt clay loam soil is unlikely to cause any negative effect on the evaluated cover crop species.

Late-season control of Palmer amaranth in postharvest wheat stubble is important for reducing the seedbank. Our objectives were to evaluate the efficacy of late-season postemergence herbicides for Palmer amaranth control, shoot dry biomass, and seed production in postharvest wheat stubble. Field experiments were conducted at Kansas State University Agricultural Research Center near Hays, KS, during 2019 and 2020 growing seasons. The study site had a natural seedbank of Palmer amaranth. Herbicide treatments were applied 3 wk after wheat harvest when Palmer amaranth plants had reached the inflorescence initiation stage. Palmer amaranth was controlled by 96% to 98% 8 wk after treatment and shoot biomass as well as seed production was prevented when paraquat was applied alone or when mixed with atrazine, metribuzin, flumioxazin, 2,4-D, sulfentrazone, pyroxasulfone + sulfentrazone, or flumioxazin + metribuzin, and with glyphosate + dicamba, glyphosate + 2,4-D, saflufenacil + 2,4-D, glufosinate + dicamba + glyphosate, and glufosinate + 2,4-D + glyphosate. Palmer amaranth was controlled by 89% to 93% with application of glyphosate, glufosinate, dicamba + 2,4-D, saflufenacil + atrazine, and saflufenacil + metribuzin resulting in Palmer amaranth shoot biomass of 15 to 56 g m−2 and production of 1,080 to 7,040 seeds m−2. Palmer amaranth control was less than 86% with application of dicamba, 2,4-D, dicamba + atrazine, and saflufenacil resulting in Palmer amaranth shoot biomass of 38 to 47 g m−2 and production of 3,110 to 6,190 seeds m−2. Palmer amaranth was controlled 63% and 72%, shoot biomass was 178 and 161 g m−2, and seed production was 35,180 and 39,510 seeds m−2, respectively, with application of 2,4-D + bromoxynil + fluroxypyr, and bromoxynil + pyrasulfotole + atrazine. Growers should use these effective postemergence herbicide mixes for Palmer amaranth control to prevent seed prevention postharvest in wheat stubble.

Palmer amaranth is the most problematic and troublesome weed in agronomic cropping systems in the United States. Acetolactate synthase (ALS) inhibitor and glyphosate-resistant (GR) Palmer amaranth has been confirmed in Nebraska and it is widespread in several counties. Soybean resistant to isoxaflutole/glufosinate/glyphosate has been developed that provides additional herbicide site of action for control of herbicide-resistant weeds. The objectives of this study were to evaluate herbicide programs for control of ALS inhibitor/GR Palmer amaranth and their effect on Palmer amaranth density and biomass, as well as soybean injury and yield in isoxaflutole/glufosinate/glyphosate–resistant soybean. Field experiments were conducted in a grower’s field infested with ALS inhibitor and GR Palmer amaranth near Carleton, Nebraska, in 2018 and 2019. Isoxaflutole applied alone or mixed with sulfentrazone/pyroxasulfone, flumioxazin/pyroxasulfone, or imazethapyr/saflufenacil/pyroxasulfone provided similar control (86%–99%) of Palmer amaranth 21 d after PRE (DAPRE). At 14 d after early-POST (DAEPOST), isoxaflutole applied PRE and PRE followed by (fb) POST controlled Palmer amaranth by 10% to 63% compared to 75% to 96% control with glufosinate applied EPOST in both years. A PRE herbicide fb glufosinate controlled Palmer amaranth 80% to 99% 21 d after late-POST (DALPOST) in 2018, and reduced density 89% to 100% in 2018 and 58% to 100% in 2019 at 14 DAEPOST. No soybean injury was observed from any of the herbicide programs tested in this study. Soybean yield in 2019 was relatively higher due to higher precipitation compared with 2018 with generally no differences between herbicide programs. This research indicates that herbicide programs are available for effective control of ALS inhibitor/GR Palmer amaranth in isoxaflutole/glufosinate/glyphosate-resistant soybean.

Velvetleaf is an economically important weed in agronomic crops in Nebraska and the United States. Dicamba applied alone usually does not provide complete velvetleaf control, particularly when velvetleaf is taller than 15 cm. The objectives of this experiment were to evaluate the interaction of dicamba, fluthiacet-methyl, and glyphosate applied alone or in a mixture in two- or three-way combinations for velvetleaf control in dicamba/glyphosate–resistant (DGR) soybean and to evaluate whether velvetleaf height (≤12 cm or ≤20 cm) at the time of herbicide application influences herbicide efficacy, velvetleaf density, biomass, and soybean yield. Field experiments were conducted near Clay Center, NE in 2019 and 2020. The experiment was arranged in a split-plot with velvetleaf height (≤12 cm or ≤20 cm) as the main plot treatment and herbicides as subplot treatment. Fluthiacet provided ≥94% velvetleaf control 28 d after treatment (DAT) and ≥96% biomass reduction regardless of application rate or velvetleaf height. Velvetleaf control was 31% to 74% at 28 DAT when dicamba or glyphosate was applied alone to velvetleaf ≤20 cm tall compared with 47% to 100% control applied to ≤12-cm-tall plants. Dicamba applied alone to ≤20-cm-tall velvetleaf provided −1 + fluthiacet at 7.2 g ai ha−1 or glyphosate at 1,260 g ae ha−1. Dicamba at 280 g ae ha−1 + glyphosate at 630 g ae ha−1 applied to ≤20-cm-tall velvetleaf resulted in 86% control 28 DAT compared with the expected 99% control. The interaction of dicamba + fluthiacet + glyphosate was additive for velvetleaf control and biomass reduction regardless of application rate and velvetleaf height.

Glyphosate-resistant (GR) Palmer amaranth is one of the most difficult to control weeds in soybean production fields in Nebraska and the United States. An integrated approach is required for effective management of GR Palmer amaranth. Cultural practices such as narrow row spacing might augment herbicide efficacy for management of GR Palmer amaranth. The objectives of this study were to evaluate the effect of row spacing and herbicide programs for management of GR Palmer amaranth in dicamba/glyphosate-resistant (DGR) soybean. Field experiments were conducted in a grower’s field with a uniform population of GR Palmer amaranth near Carleton, Nebraska, in 2018 and 2019. Year-by-herbicide program-by-row spacing interactions were significant for all variables; therefore, data were analyzed by year. Herbicides applied PRE controlled GR Palmer amaranth ≥95% in both years 14 d after PRE (DAPRE). Across soybean row-spacing, most PRE followed by (fb) early-POST (EPOST) herbicide programs provided 84% to 97% control of Palmer amaranth compared with most EPOST fb late-post (LPOST) programs, excluding dicamba in single and sequential applications (82% to 95% control). Mixing microencapsulated acetochlor with a POST herbicide in PRE fb EPOST herbicide programs controlled Palmer amaranth ≥93% 14 d after EPOST and ≥96% 21 d after LPOST with no effect on Palmer amaranth density. Interaction of herbicide program-by-row spacing on Palmer amaranth control was not significant; however, biomass reduction was significant at soybean harvest in 2019. The herbicide programs evaluated in this study caused no soybean injury. Due to drought conditions during a majority of the 2018 growing season, soybean yield in 2018 was reduced compared with 2019.

The complementary activity of 4-hydroxphenylpyruvate dioxygenase (HPPD) inhibitors and atrazine is well documented, but the use of atrazine is restricted in some geographic areas, including the province of Quebec in Canada, necessitating the evaluation of atrazine alternatives and their interactions with HPPD inhibitors. The objectives of this study were to determine whether mixing HPPD inhibitors with atrazine alternative photosystem II (PS II) inhibitors, such as metribuzin and linuron applied PRE or bromoxynil and bentazon applied POST, results in similar control of multiple herbicide–resistant (MHR) waterhemp [Amaranthus tuberculatus (Moq.) Sauer] in corn (Zea mays L.). Ten field trials, five with herbicides applied PRE and five with herbicides applied POST, were conducted in Ontario, Canada, in fields infested with MHR A. tuberculatus. Isoxaflutole, applied PRE, controlled MHR A. tuberculatus 58% to 76%; control increased 17% to 34% with the addition of atrazine, metribuzin, or linuron at three of five sites across 2, 4, 8, and 12 wk after application (WAA). The interaction between isoxaflutole and PS II inhibitors, applied PRE, was additive for MHR A. tuberculatus control and biomass and density reduction. Mesotrione, tolpyralate, and topramezone, applied POST, controlled MHR A. tuberculatus 54% to 59%, 61%, and 44% to 45%, respectively, at two of five sites across 4, 8, and 12 WAA. The addition of atrazine, bromoxynil, or bentazon to mesotrione improved MHR A. tuberculatus control 29%, 34%, and 22%; to tolpyralate, improved control 2%, 20%, and 10%; and to topramezone, improved control 3%, 14%, and 8%, respectively. Interactions between HPPD and PS II inhibitors were mostly additive; however, synergistic responses were observed with mesotrione + bromoxynil or bentazon, and tolpyralate + bromoxynil. Mixing atrazine alternatives metribuzin or linuron with isoxaflutole, applied PRE, and bromoxynil or bentazon with mesotrione or tolpyralate, applied POST, resulted in similar or better control of MHR A. tuberculatus in corn.

Glyphosate-resistant (GR) Palmer amaranth is a troublesome weed that can emerge throughout the soybean growing season in Nebraska and several other regions of the United States. Late-emerging Palmer amaranth plants can produce seeds, thus replenishing the soil seedbank. The objectives of this study were to evaluate single or sequential applications of labeled POST herbicides such as acifluorfen, dicamba, a fomesafen and fluthiacet-methyl premix, glyphosate, and lactofen on GR Palmer amaranth control, density, biomass, seed production, and seed viability, as well as grain yield of dicamba- and glyphosate-resistant (DGR) soybean. Field experiments were conducted in a grower's field infested with GR Palmer amaranth near Carleton, NE, in 2018 and 2019, with no PRE herbicide applied. Acifluorfen, dicamba, a premix of fomesafen and fluthiacet-methyl, glyphosate, or lactofen were applied POST in single or sequential applications between the V4 and R6 soybean growth stages, with timings based on product labels. Dicamba applied at V4 or in sequential applications at V4 followed by R1 or R3 controlled GR Palmer amaranth 91% to 100% at soybean harvest, reduced Palmer amaranth density to as low as 2 or fewer plants m–2, reduced seed production to 557 to 2,911 seeds per female plant, and resulted in the highest soybean yield during both years of the study. Sequential applications of acifluorfen, fomesafen and fluthiacet premix, or lactofen were not as effective as dicamba for GR Palmer amaranth control; however, they reduced seed production similar to dicamba. On the basis of the results of this study, we conclude that dicamba was effective for controlling GR Palmer amaranth and reduced density, biomass, and seed production without DGR soybean injury. Herbicides evaluated in this study had no effect on Palmer amaranth seed viability. Nomenclature: Acifluorfen; dicamba; fluthiacet-methyl; fomesafen; glyphosate; lactofen; Palmer amaranth; Amaranthus palmeri S. Watson; soybean; Glycine max (L.) Merr.

Since the commercialization of herbicide-resistant (HR) crops, primarily glyphosate-resistant crops, their adoption has increased rapidly. Multiple herbicide resistance traits in crops such as canola (Brassica napus L.), corn (Zea mays L.), cotton (Gossypium hirsutum L.), and soybean [Glycine max (L.) Merr.] have become available in recent years, and management of their volunteers needs attention to prevent interference and yield loss in rotational crops. The objectives of this review were to summarize HR crop traits in barley (Hordeum vulgare L.), canola, corn, cotton, rice (Oryza sativa L.), soybean, sugarbeet (Beta vulgaris L.), and wheat (Triticum aestivum L.); assess their potential for volunteerism; and review existing literature on the interference of HR crop volunteers, yield loss, and their management in rotational crops. HR crop volunteers are problem weeds in agronomic cropping systems, and the impact of volunteerism depends on several factors, such as crop grown in rotation, the density of volunteers, management practices, and microclimate. Interference of imidazolinone-resistant (IR) barley or wheat volunteers can be a problem in rotational crops, particularly when IR crops such as canola or wheat are grown. HR canola volunteers are abundant in the Northern Great Plains due to high fecundity, seed loss before or during harvest, and secondary seed dormancy, and they can interfere in crops grown in rotation such as flax (Linum usitatissimum L.), field peas (Pisum sativum L.), and soybean. HR corn volunteers are competitive in crops grown in rotation such as corn, cotton, soybean, and sugarbeet, with yield loss depending on the density of HR corn volunteers. Volunteers of HR cotton, rice, soybean, and sugarbeet are not major concerns and can be controlled with existing herbicides. Herbicide options would be limited if the crop volunteers are multiple HR; therefore, recording the cultivar planted the previous year and selecting the appropriate herbicide are important. The increasing use of 2,4-D, dicamba, glufosinate, and glyphosate in North American cropping systems requires research on herbicide interactions and alternative herbicides or methods for controlling multiple HR crop volunteers.

A prepackaged mixture of desmedipham + phenmedipham was previously labeled for control of Amaranthus spp. in sugarbeet. Currently, there are no effective POST herbicide options to control glyphosate-resistant Palmer amaranth in sugarbeet. Sugarbeet growers are interested in using desmedipham + phenmedipham to control escaped Palmer amaranth. In 2019, a greenhouse experiment was initiated near Scottsbluff, NE, to determine the selectivity of desmedipham and phenmedipham between Palmer amaranth and sugarbeet. Three populations of Palmer amaranth and four sugarbeet hybrids were evaluated. Herbicide treatments consisted of desmedipham and phenmedipham applied singly or as mixtures at an equivalent rate. Herbicides were applied when Palmer amaranth and sugarbeet were at the cotyledon stage, or two true-leaf sugarbeet stage and when Palmer amaranth was 7 cm tall. The selectivity indices for desmedipham, phenmedipham, and desmedipham + phenmedipham were 1.61, 2.47, and 3.05, respectively, at the cotyledon stage. At the two true-leaf application stage, the highest rates of desmedipham and phenmedipham were associated with low mortality rates in sugarbeet, resulting in a failed response of death. The highest rates of desmedipham + phenmedipham caused a death response of sugarbeet; the selectivity index was 2.15. Desmedipham treatments resulted in lower LD50 estimates for Palmer amaranth compared to phenmedipham, indicating that desmedipham can provide greater levels of control for Palmer amaranth. However, desmedipham also caused greater injury in sugarbeet, producing lower LD50 estimates compared to phenmedipham. Desmedipham + phenmedipham provided 90% or greater control of cotyledon-size Palmer amaranth at a labeled rate but also caused high levels of sugarbeet injury. Neither desmedipham, phenmedipham, nor desmedipham + phenmedipham was able to control 7-cm tall Palmer amaranth at previously labeled rates. Results indicate that desmedipham + phenmedipham can only control Palmer amaranth if applied at the cotyledon stage and a high level of sugarbeet injury is acceptable. Nomenclature: Desmedipham; phenmedipham; Palmer amaranth; Amaranthus palmeri S. Watson AMPI; sugarbeet; Beta vulgaris L.

The biologically-effective-dose of tolpyralate, a new 4-hydroxyphenyl-pyruvate dioxygenase (HPPD)-inhibitor, applied alone or tank-mixed with atrazine, for the control of multiple-herbicide-resistant (MHR) waterhemp [Amaranthus tuberculatus (Moq.) J. D. Sauer] has not been studied in corn. Seven field experiments were conducted during a three-year period (2018, 2019, 2020) in Ontario, Canada with MHR waterhemp to determine: 1) the dose-response of MHR waterhemp to tolpyralate and tolpyralate plus atrazine, and 2) the relative efficacy of tolpyralate and tolpyralate plus atrazine to post-emergence corn herbicides, dicamba/atrazine (500/1000 g·ha−1) and mesotrione + atrazine (100 + 280 g·ha−1). Tolpyralate + atrazine (120 + 4000 g·ha−1) caused 13% corn injury at one site two weeks after application (WAA), which was observed as transient foliar chlorosis and bleaching of new leaves. At 12 WAA, the predicted dose of tolpyralate for 50% control of MHR waterhemp at Cottam and on Walpole Island was 8 and 2 g·ha−1, respectively; the predicted dose of tolpyralate + atrazine for 50% control of MHR waterhemp at Cottam and on Walpole Island was 5 + 160 and 1 + 21 g·ha−1, respectively. The difference in predicted dose at the two sites is likely due to differences in MHR density and resistance profile. Applied at the registered rate, tolpyralate (30 g·ha−1) and tolpyralate + atrazine (30 + 1000 g·ha−1) controlled MHR waterhemp similar to dicamba/atrazine and mesotrione + atrazine across sites. This study demonstrates that tolpyralate + atrazine, applied POST, provides season-long control of MHR waterhemp in corn.

Highlights Nine soil moisture sensors were evaluated in two soil types under different installation orientations. Sensor-specific and soil-specific calibration functions were developed and validated. Sensor performance improved substantially (31% to 89%) after calibration. On average, sensor performance was 67% better in loamy sand than in silt loam soil. Abstract. Reliable soil moisture information is vital for optimal irrigation management, farm-level agronomic decision-making, hydrologic studies, and cropping systems modeling. A wide range of soil moisture sensing technologies is commercially available, but their performance must be evaluated for diverse conditions of use. In this research, we investigated nine soil moisture sensors based on time-domain reflectometry, capacitance, and electrical resistance principles in production field conditions with two installation orientations, i.e., vertical (V) and horizontal (H), in two soils (silt loam and loamy sand) and two growing seasons (2017 and 2018). Performance parameters deduced from the 2017 datasets revealed that sensor type and soil type significantly affected the soil moisture sensor performance under factory calibration (F.C.); however, sensor installation orientation did not. Thus, the sensors were only evaluated based on their performance in horizontal orientation in both soils. Precision and accuracy were considered targets to assist in appropriate sensor selection. To improve sensor accuracy, site-specific calibration (S.S.C.) functions were developed and validated using independent datasets from 2018. Considering mean bias error (MBE), all sensors overestimated volumetric soil water content (θv) in both soils, with the exception of TEROS 21 (MPS-6) in silt loam and JD probe in loamy sand. On average, sensor performance was 67% better in loamy sand than in silt loam. Overall, the sensors showed higher precision in silt loam (R2 = 0.53 to 0.93) than in loamy sand (R2 = 0.25 to 0.82). Substantial post-S.S.C. improvement (32% to 89%) was observed in all sensors‘ performance relative to F.C. in silt loam. In loamy sand, while most sensors performed reasonably well with F.C., considerable improvements (28% to 85%) were observed with S.S.C. Significant differences (p 0.05) sensitivity was detected for any of the sensors in loamy sand. TEROS 21 (MPS-6) had the highest sensitivity to Tsoil with a slope of -4.25. In contrast, while statistically significant (p

Multiple-herbicide-resistant (MHR) waterhemp has been confirmed and is difficult to control for growers in Ontario, Canada and in the Midwestern United States. The objective of this study was to evaluate early post-emergence (EPOST) herbicides for control of MHR waterhemp in field corn. Five field trials were conducted over a two-year period (2019, 2020) at sites on Walpole Island, ON and near Cottam, ON, Canada. Thirteen herbicide tank-mixtures containing multiple modes-of-action (MOA) were applied EPOST to 5 cm MHR waterhemp in field corn. Control of MHR waterhemp varied by site due to variable plant density, plant biomass, and number of herbicide-resistant individuals across research sites and years. Control of MHR waterhemp ranged from 90% to 100% with glyphosate + S-metolachlor/mesotrione/ bicyclopyrone/atrazine, glyphosate/2,4-D choline + rimsulfuron + mesotrione + atrazine, glyphosate + S-metolachlor/atrazine/mesotrione, glyphosate + mesotrione + atrazine, glyphosate/S-metolachlor/mesotrione + atrazine, glyphosate + S-metolachlor/mesotrione/bicyclopyrone, glyphosate/2,4-D choline + rimsulfuron + mesotrione, and glyphosate + pyroxasulfone + dicamba/atrazine at 4, 8, and 12 WAA. Control of MHR waterhemp ranged from 70% to 100% with glyphosate + topramezone/dimethenamid-P + dicamba/atrazine, glyphosate + isoxaflutole + atrazine, and glyphosate + tolpyralate + atrazine at 4, 8, and 12 WAA. Control of MHR waterhemp was similar for all herbicide programs, except glyphosate + dicamba/atrazine and glyphosate + S-metolachlor/atrazine which resulted in the lowest control at three of five sites that ranged from 63% to 89% and 61% to 76%, respectively. Crop injury was ≤10% for herbicide programs tested, except 28% to 31% corn injury with glyphosate/2,4-D choline + rimsulfuron + mesotrione + atrazine; however, without effect on corn grain yield. Corn yield was comparable with all herbicide programs evaluated in this study. It is concluded that there are herbicide programs that provide control of emerged and full-season residual control of MHR waterhemp in field corn.

Control of waterhemp is becoming more difficult in Ontario because biotypes have evolved resistance to four herbicide sites of action (SOA), including groups 2, 5, 9, and 14. The objective of this study was to compare PRE, POST, and PRE followed by (fb) POST herbicide programs for their effect on control, density, and biomass of multiple-herbicide–resistant (MHR) waterhemp as well as corn injury and grain yield. Two separate field studies, each consisting of five field trials, were conducted over a 2-yr period (2018 and 2019) in fields where corn was grown in Ontario, Canada. The first experiment evaluated MHR waterhemp control with an inhibitor of 4-hydroxyphenyl-pyruvate dioxygenase (HPPD) applied PRE, PRE fb glufosinate applied POST, and glufosinate applied POST. The second experiment evaluated MHR waterhemp control with a non-HPPD inhibitor applied PRE, then PRE fb a POST application of atrazine + mesotrione, and then atrazine + mesotrione applied POST. Atrazine + isoxaflutole caused 3% to 5% corn injury at environment 1 (E1); no corn injury was observed with PRE and POST herbicide programs at environments E2, E3, E4, and E5. In general, atrazine/bicyclopyrone/mesotrione/S-metolachlor and dimethenamid-P/saflufenacil applied PRE controlled MHR waterhemp ≥95% 12 wk after POST application (WAA). A POST application of glufosinate following atrazine + tolpyralate PRE, and a POST application of atrazine + mesotrione following atrazine/dicamba or atrazine/S-metolachlor PRE, improved control at 4, 8, and 12 WAA in most environments. In general, PRE fb POST applications resulted in better control of MHR waterhemp throughout the growing season than single PRE and POST applications (P < 0.05). We conclude that herbicide programs based on multiple effective SOAs may offer effective control of MHR waterhemp where field corn is grown. It is advisable that when choosing an herbicide application program that excellent control of MHR waterhemp should be the goal given its high fecundity and competitive ability.

The evolution of multiple herbicide-resistant weeds, including Palmer amaranth, has necessitated the implementation of an integrated weed management (IWM) program. Understanding weed emergence patterns is critical for developing effective IWM strategies. The objective of this study was to evaluate the effect of tillage timings and residual herbicides on cumulative emergence and emergence pattern of Palmer amaranth. Field experiments were conducted in 2015 and 2016 in a field naturally infested with photosystem (PS) II and 4-hydroxyphenylpyruvate dioxygenase (HPPD) inhibitor-resistant Palmer amaranth near Shickley, Nebraska, in a bare ground study, with no crop planted in the plots, although residues from the preceding corn crop were present on the soil surface. Treatments consisted of shallow tillage timings (early, mid, and late), three premix corn or soybean residual herbicides, and a nontreated control. The Weibull function was fitted to cumulative Palmer amaranth emergence with day of year (DOY) and thermal time (TT) as independent variables. Year by treatment interaction was significant for time to 10%, 25%, 50%, 75%, and 90% Palmer amaranth emergence and cumulative emergence. The majority of Palmer amaranth seedlings emerged early, following early tillage with 90% cumulative emergence occurring on DOY 172 compared with DOY 210 to 212 for mid- and late-tillage, and DOY 194 for the nontreated control in 2015. In 2016, 90% of cumulative emergence following early-, mid-, and late-tillage (DOYs 201 to 211) were similar, and that of the nontreated control (DOY 188) was similar to that of early tillage. Nontreated control and PRE herbicide treatments had similar DOY values for 90% emergence in both years. The number of emerged Palmer amaranth seedlings over the season was higher with shallow tillage than no tillage or with the use of PRE herbicides. Nomenclature: Atrazine; bicyclopyrone; chlorimuron; flumioxazin; fluthiacet; mesotrione; pyroxasulfone; S-metolachlor; Palmer amaranth; Amaranthus palmeri S. Watson

A soybean trait resistant to sulfonylurea herbicides along with glyphosate (Bolt™ soybean) has been developed. Information is needed to determine herbicide programs for weed control and crop safety in this new multiple herbicide–resistant soybean trait. The objectives of this study were to evaluate weed control and crop safety in sulfonylurea/glyphosate-resistant soybean with herbicide programs, including but not limited to acetolactate synthase (ALS) inhibitors. Field experiments were conducted near Clay Center, NE, USA, in 2016 and 2017. Herbicide programs with multiple sites-of-action including rimsulfuron/thifensulfuron in mixture with flumioxazin, flumioxazin/chlorimuron, pyroxasulfone, chlorimuron/metribuzin, or saflufenacil/imazethapyr plus dimethenamid-P provided 91%–97% control of common waterhemp, velvetleaf, and common lambsquarters. Rimsulfuron and (or) thifensulfuron resulted in 92%–97% control of velvetleaf and common lambsquarters and 81%–87% common waterhemp control at 21 d after pre-emergence (PRE) (DAPRE) herbicide application. Soybean injury was transient and varied from 3% to 11% at 21 DAPRE and 14 d after post-emergence (POST) (DAPOST) herbicide application without causing yield loss. At 30 and 60 DAPOST, 87%–97% velvetleaf control and 92%–98% common lambsquarters control was achieved with herbicide programs tested (PRE, POST, or PRE followed by POST). Common waterhemp control at 30 and 60 DAPOST was not consistent between years. Weed density and biomass reduction were mostly similar to weed control achieved. Untreated control resulted in the lowest soybean yield (1811 kg ha−1) in 2016 compared with 3406–4611 kg ha−1 in herbicide programs.

Residual herbicides applied PRE provide early season weed control, potentially avoid the need for multiple POST herbicides, and can provide additional control of herbicide-resistant weeds. Thus, field studies were conducted in 2017 and 2018 at Concord, NE, to evaluate the influence of PRE herbicides on critical time for postemergence weed removal (CTWR) in corn. The studies were arranged in a split-plot design that consisted of three herbicide regimes as main plot treatments and seven weed removal timings as subplot treatments in four replications. The herbicide regimes included no PRE herbicide, atrazine, and a premix of saflufenacil/dimethenamid-P mixed with pyroxasulfone. The weed removal timings were at V3, V6, V9, V12, and V15 corn growth stages and then plots were kept weed-free until harvest. A weed-free and nontreated control were included for comparison. The relationship between corn growth or yield, and weed removal timings in growing degree days (GDD) was described by a four-parameter log-logistic model. This model was used to estimate the critical time for weed removal based on 5% crop yield loss threshold. A delay in weed removal until the V2 to V3 corn growth stage (91 to 126 GDD) reduced corn biomass by 5% without PRE herbicide application. The CTWR started at V3 without PRE herbicide in both years. Atrazine delayed the CTWR up to V5 in both years, whereas saflufenacil/dimethenamid-P plus pyroxasulfone further delayed the CTWR up to the V10 and V8 corn growth stages in 2017 and 2018, respectively. Herbicide applied PRE particularly with multiple sites of action can delay the CTWR in corn up to a maximum growth stage of V10, and delay or reduce the need for POST weed management.Nomenclature: Atrazine, dimethenamid-P; glyphosate; pyroxasulfone; saflufenacil; corn, Zea mays L.

Pollen-mediated gene flow (PMGF) refers to the transfer of genetic information (alleles) from one plant to another compatible plant. With the evolution of herbicide-resistant (HR) weeds, PMGF plays an important role in the transfer of resistance alleles from HR to susceptible weeds; however, little attention is given to this topic. The objective of this work was to review reproductive biology, PMGF studies, and interspecific hybridization, as well as potential for herbicide resistance alleles to transfer in the economically important broadleaf weeds including common lambsquarters, giant ragweed, horseweed, kochia, Palmer amaranth, and waterhemp. The PMGF studies involving these species reveal that transfer of herbicide resistance alleles routinely occurs under field conditions and is influenced by several factors, such as reproductive biology, environment, and production practices. Interspecific hybridization studies within Amaranthus and Ambrosia spp. show that herbicide resistance allele transfer is possible between species of the same genus but at relatively low levels. The widespread occurrence of HR weed populations and high genetic diversity is at least partly due to PMGF, particularly in dioecious species such as Palmer amaranth and waterhemp compared with monoecious species such as common lambsquarters and horseweed. Prolific pollen production in giant ragweed contributes to PMGF. Kochia, a wind-pollinated species can efficiently disseminate herbicide resistance alleles via both PMGF and tumbleweed seed dispersal, resulting in widespread occurrence of multiple HR kochia populations. The findings from this review verify that intra- and interspecific gene flow can occur and, even at a low rate, could contribute to the rapid spread of herbicide resistance alleles. More research is needed to determine the role of PMGF in transferring multiple herbicide resistance alleles at the landscape level. Nomenclature: Common lambsquarters, Chenopodium album L.; giant ragweed, Ambrosia trifida L.; horseweed, Erigeron canadensis (L.) Cronquist; kochia, Bassia scoparia (L.) A.J. Scott; Palmer amaranth, Amaranthus palmeri S. Watson.; waterhemp, Amaranthus tuberculatus (Moq.) Sauer

Glyphosate-resistant (GR) Palmer amaranth is a problematic, annual broadleaf weed in soybean production fields in Nebraska and many other states in the United States. Soybean resistant to 2,4-D, glyphosate, and glufosinate (Enlist E3TM) has been developed and was first grown commercially in 2019. The objectives of this research were to evaluate the effect of herbicide programs applied PRE, PRE followed by (fb) late-POST (LPOST), and early-POST (EPOST) fb LPOST on GR Palmer amaranth control, density, and biomass reduction, soybean injury, and yield. Field experiments were conducted near Carleton, NE, in 2018, and 2019 in a grower’s field infested with GR Palmer amaranth in 2,4-D–, glyphosate-, and glufosinate-resistant soybean. Sulfentrazone + cloransulam-methyl, imazethapyr + saflufenacil + pyroxasulfone, and chlorimuron ethyl + flumioxazin + metribuzin applied PRE provided 84% to 97% control of GR Palmer amaranth compared with the nontreated control 14 d after PRE. Averaged across herbicide programs, PRE fb 2,4-D and/or glufosinate, and sequential application of 2,4-D or glufosinate applied EPOST fb LPOST resulted in 92% and 88% control of GR Palmer amaranth, respectively, compared with 62% control with PRE-only programs 14 d after LPOST. Reductions in Palmer amaranth biomass followed the same trend; however, Palmer amaranth density was reduced 98% in EPOST fb LPOST programs compared with 91% reduction in PRE fb LPOST and 76% reduction in PRE-only programs. PRE fb LPOST and EPOST fb LPOST programs resulted in an average soybean yield of 4,478 and 4,706 kg ha−1, respectively, compared with 3,043 kg ha−1 in PRE-only programs. Herbicide programs evaluated in this study resulted in no soybean injury. The results of this research illustrate that herbicide programs are available for the management of GR Palmer amaranth in 2,4-D–, glyphosate-, and glufosinate-resistant soybean.

Corn-on-corn production systems, common in highly productive irrigated fields in South Central Nebraska, can create issues with volunteer corn management in corn fields. Enlist™ corn is a new multiple herbicide–resistance trait providing resistance to 2,4-D, glyphosate, and the aryloxyphenoxypropionate herbicides (FOPs), commonly integrated in glufosinate-resistant germplasm. The objectives of this study were to (1) evaluate ACCase-inhibiting herbicides for glyphosate/glufosinate-resistant volunteer corn control in Enlist corn and (2) evaluate the effect of ACCase-inhibiting herbicide application timing (early POST vs. late POST) on volunteer corn control, Enlist corn injury, and yield. Field experiments were conducted in 2018 and 2019 at South Central Agricultural Laboratory near Clay Center, NE. Glyphosate/glufosinate-resistant corn harvested the year prior was cross-planted at 49,000 seeds ha–1 to mimic volunteer corn in this study. After 7 to 10 d had passed, Enlist corn was planted at 91,000 seeds ha–1. Application timing of FOPs (fluazifop, quizalofop, and fluazifop/fenoxaprop) had no effect on Enlist corn injury or yield, and provided 97% to 99% control of glyphosate/glufosinate-resistant volunteer corn at 28 d after treatment (DAT). Cyclohexanediones (clethodim and sethoxydim; DIMs) and phenylpyrazolin (pinoxaden; DEN) provided 84% to 98% and 65% to 71% control of volunteer corn at 28 DAT, respectively; however, the treatment resulted in 62% to 96% Enlist corn injury and 69% to 98% yield reduction. Orthogonal contrasts comparing early-POST (30-cm-tall volunteer corn) and late-POST (50-cm-tall volunteer corn) applications of FOPs were not significant for volunteer corn control, Enlist corn injury, and yield. Fluazifop, quizalofop, and fluazifop/fenoxaprop resulted in 94% to 99% control of glyphosate/glufosinate-resistant volunteer corn with no associated Enlist corn injury or yield loss; however, quizalofop is the only labeled product as of 2020 for control of volunteer corn in Enlist corn.Nomenclature: Clethodim, fenoxaprop-p-ethyl, fluazifop-p-butyl; pinoxaden; quizalofop-p-ethyl; sethoxydim; field corn, Zea mays L