Search

The topologically engineered complex Schwarzites architecture has been used to build novel and unique structural components with a high specific strength. The mechanical properties of these building blocks can be further tuned, reinforcing with stronger and high surface area architecture. In the current work, we have built six different Schwarzites structures with multiple interlocked layers, which we named architecturally interlocked petal-schwarzites (AIPS). These complex structures are 3D printed into macroscopic dimensions and compressed using uniaxial compression. The experimental results show a strong dependency of mechanical response on the number of layers and topology of the layers. Fully atomistic molecular dynamics compressive simulations were also carried out, and the results are in good agreement with experimental observations. They can explain the underlying AIPS mechanism of high specific strength and energy absorption. The proposed approach opens a new perspective on developing new 3D-printed materials with tunable and enhanced mechanical properties., Comment: 22 pages and 9 figures

We carried out fully atomistic reactive molecular dynamics simulations to study the mechanical behavior of six newly proposed hybrid schwarzite-based structures (interlocked petal-schwarzites). Schwarzites are carbon crystalline nanostructures with negative Gaussian curvature created by mapping a TPMS (Triply Periodic Minimal Surface) with carbon rings containing six to eight atoms. Our simulations have shown that petal-schwarzite structures can withstand uni-axial compressive stress up to the order of GPa and can be compressed past 50 percent strain without structural collapse. Our most resistant hierarchical structure has a calculated compressive strength of 260~GPa and specific energy absorption (SEA) of 45.95 MJ/kg, while possessing a mass density of only 685 kg/m$^3$. These results show that these structures could be excellent lightweight materials for applications that require mechanical energy absorption.

The 3D printing technology offers an innovative approach for developing energy storage devices to create facile and low-cost customized electrodes for modern electronics. Generating electric potential by moving a droplet of ionic solution over two-dimensional (2D) materials is a novel method for rain energy harvesting. This work demonstrated a liquid-solid contact electrification-based 3D printed nanogenerator where raindrop passes through the positively charged ultrathin Gadolinium Telluride (Gd2Te3) sheets. Experimental results showed that voltage as high as ~0.6 V could be generated by moving a droplet of ionic solution on the decorated 3D printed nanogenerator. The output efficiency of the nanogenerator is increased ~400% by enhancing the surface area of copious 3D printed porous structures. Density Functional Theory (DFT) calculations are done, revealing that the high electrical conductivity of (112) surface of Gd2Te3 is due to the p-type charge carriers. Additionally, we illustrate the enhancement of the output performance (~0.8V) by using a graphite rod and arbitrarily manipulating the surface charge. Therefore, this work can open up a new avenue to advance scientific research of Blue energy harvesting and tackle the energy crisis.

Nature-occurring structures exhibiting unique topological features such as complex and gradient porosity has been the basis to create new materials and/or structures. Most studies have been focused on complex periodic porous structures but gradient porous ones have not been yet fully investigated for stable structural designs. In this work, we have proposed and tested a new approach to create cellular griding structures, in which the mass density varies from the center to the borders, i.e, a radial gradient. To create these new structures we exploited the topology of two carbon-based families with different pore sizes, the schwarzites, and schwarzynes. We created fully atomistic models that were translated into macroscale ones that were then 3D printed. The mechanical behavior of the gradient structures was investigated by molecular dynamics simulations and mechanical compression tests of the printed models. Our results show that their mechanical response can be engineered (for instance, in terms of energy absorption, ballistic performance, etc.) and can outperform their corresponding density uniform structures., Comment: 26 pages, 7 figures, and 2 tables

In this work, We combined fully atomistic molecular dynamics and finite elements simulations with mechanical testings to investigate the mechanical behavior of atomic and 3D-printed models of pentadiamond. Pentadiamond is a recently proposed new carbon allotrope, which is composed of a covalent network of pentagonal rings. Our results showed that the stress-strain behavior is almost scale-independent. The stress-strain curves of the 3D-printed structures exhibit three characteristic regions. For low-strain values, this first region presents a non-linear behavior close to zero, followed by a well-defined linear behavior. The second regime is a quasi-plastic one and the third one is densification followed by structural failures (fracture). The Young's modulus values decrease with the number of pores. The deformation mechanism is bending-dominated and different from the layer-by-layer deformation mechanism observed for other 3D-printed structures. They exhibit good energy absorption capabilities, with some structures even outperforming kevlar. Interestingly, considering the Ashby chart, 3D-printed pentadiamond lies almost on the ideal stretch and bending-dominated lines, making them promising materials for energy absorption applications.

Specific strength (strength/density) is a crucial factor while designing high load bearing architecture in areas of aerospace and defence. Strength of the material can be enhanced by blending with high strength component or, by compositing with high strength fillers but both the options has limitations such as at certain load, materials fail due to poor filler and matrix interactions. Therefore, researchers are interested in enhancing strength of materials by playing with topology/geometry and therefore nature is best option to mimic for structures whereas, complexity limits nature mimicked structures. In this paper, we have explored Zeolite-inspired structures for load bearing capacity. Zeolite-inspired structure were obtained from molecular dynamics simulation and then fabricated via Fused deposition Modeling. The atomic scale complex topology from simulation is experimentally synthesized using 3D printing. Compressibility of as-fabricated structures was tested in different direction and compared with simulation results. Such complex architecture can be used for ultralight aerospace and automotive parts., Comment: 24 pages, 6 figures