Search

Since hop secondary metabolites have a direct correlation with the quality of beer and other hop-based beverages, and the volatile fraction of hop has a complex composition, requiring effective separation, here we explore the application of headspace solid-phase microextraction as a sample preparation method, coupled with comprehensive two-dimensional gas chromatography-mass spectrometry (GC×GC-MS) analysis. The methodology involved the use of a DVB/PDMS fibre with 500 mg of hop cone powder, extracted for 40 min at 50 °C, for both GC-MS and GC×GC-MS. The varieties Azacca, Cascade, Enigma, Loral, and Zappa were studied comprehensively. The results demonstrate that GC×GC-MS increases the number of peaks by over 300% compared to classical GC-MS. Overall, 137 compounds were identified or tentatively identified and categorised into 10 classes, representing between 87.6% and 96.9% of the total peak area. The composition revealed the highest concentration of sesquiterpene hydrocarbons for Enigma, whilst Zappa showed a relatively significant concentration of monoterpene hydrocarbons. Principal component analysis for all compounds and classes, along with hierarchical cluster analysis, indicated similarities between Zappa and Cascade, and Azacca and Loral. In conclusion, this method presents an optimistic advancement in hop metabolite studies with a simple and established sample preparation procedure in combination with an effective separation technique.

Candida antarctica lipase A (CALA) was applied for the chemo-selective enzymatic transesterification of terpene and phenyl alcohols in 35 different essential oil samples. Comprehensive two-dimensional gas chromatography with mass spectrometry (GC×GC‒MS) analysis enabled the separation and tentative identification of a cohort of 125 compounds, allowing the instant visualisation of the reaction process changes, amid the complex chemical background of the samples. The results indicate that 42 out of 79 alcohols so-identified were fully or partially esterified within 48 h of reaction, with primary alcohols being the substrates of preference of the enzyme (90-100% conversion), followed by secondary alcohols (mostly ~ 80-100% conversion). No significant conversion of tertiary alcohols and phenols was observed using the tested conditions. Overall, the enzyme's performance was consistent for primary alcohol substrates identified in multiple samples of different compositions. The observed selectivity, efficiency, robustness, scalability (enzyme/substrate working concentration ratio > 1:160), potential reusability, mild reaction conditions, and other factors make this process a greener and more sustainable alternative for industry applications, particularly for the manufacture of novel flavours and fragrances., (© 2023. The Author(s).)

The performance of different enzymes towards the bioprocessing of aroma-related compounds was investigated and a strategy based on GC-FID analysis was developed to facilitate assessment of the stages of characterisation, screening and optimisation, including chiral ratio determination. Characterisation included activity assays (UV-Vis and GC-FID), protein quantification (NanoDrop spectrophotometry) and molar mass estimation (SDS-PAGE electrophoresis). Screening experiments assessed different enzymes, substrates, solvents, acyl donors or mediators. Aroma-related substrates comprised terpene and phenolic compounds. The enzymes tested included the lipases CALA (Sigma-Aldrich), NZ-435, LZ-TLIM, NC-ADL, LZ-CALBL and the laccases NZ-51003 and DL-IIS (all from Novozymes). Among those, NZ-435 and NZ-51003 had the highest activities in the characterisation stage and, along with CALA, achieved conversions above 70% for citronellol (lipases) or 50% for eugenol (laccases) at the screening stage. The lipases had preference for the primary alcohol and laccases for phenolic compounds, among the tested substrates. The transesterification reaction between the lipase CALA and the standards mixture (citronellol, menthol, linalool) was used to demonstrate the optimisation stage, where the best levels of temperature, enzyme and acyl donor concentrations were investigated. Optimum conditions were found to be 37-40 °C, 3-4 mg/mL of enzyme and 58-60% (v/v) vinyl acetate. Additional confirmation experiments using the same terpene standards mixture and citronella oil sample, gave a conversion of > 95% for citronellol after 1 h (for both, standards mixture and sample), and 20% or 74% for menthol after 1 h or 24 h, respectively. None of the tested enzymes demonstrated significant enantioselectivity under the tested conditions. The GC-FID approach demonstrated here was suitable to determine the reaction profiles and chiral ratio variations for biocatalysed reactions with aroma compounds in low complexity samples. Advanced separations will be applied to more complex samples in the future., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Multidimensional approaches in gas chromatography have been established as potent tools to (almost) attain fully resolved analyses. Flavours and odours are important application fields for these techniques since they include complex matrices, and are of interest for both scientific study and to consumers. This article is a review of the main research studies in the above theme, discussing the achievements and challenges that demonstrate a maturing of analytical separation technology.

This study investigates applications and performance evaluation of SLB-IL60, SLB-IL76 and SLB-IL111 columns, in relation to a DB-Wax column, for the analysis of coffee volatile compounds. Both standards and an authentic coffee sample were analysed, with solid-phase microextraction (SPME) sampling of the latter. A cryofocusing method was applied to improve resolution of the earliest eluting peaks using splitless injection SPME sample analysis. The Grob test was used to verify the inertness and efficiency of the columns, helping to understand the interactions between analytes and stationary phases, particularly toward more polar coffee analytes. A DB-5 column was used only in analysis of n-alkanes and Grob test mixtures as an apolar reference. The evaluated ionic liquid columns showed a moderate acid-base character and low inertness for compounds with hydrogen bond capabilities, especially for the hydroxylated analytes, 2,3-butanediol in the Grob test, and furanones and acids in the coffee standards. The columns exhibiting the best resolution and efficiency were DB-Wax and SLB-IL60, both for samples and standards. Although the DB-Wax column is preferred for analysis of coffee volatiles, due to better inertness, the evaluated ionic liquid columns allowed identification of compounds that were not observed in separations with the Wax-phase column in this work. Among these compounds is 3,4-dimethyl-2,5-furandione, seldom reported in the literature of coffee. Proposed improvement by the manufacturer in the inertness of the columns evaluated in this study may lead to better results; so future versions of IL phases may be better applied in the separation of target analytes, especially those with basic character. Graphical abstract Illustrative representation of the sample (coffee) and the chemical structures of the stationary phases of the ionic liquid capillary columns used as object of study in the present work.