60 results on '"Amaral, Tatiana Gondim do"'
Search Results
2. Into Mitigating Making-Do Practices using the Last Planner System and BIM: A System Dynamic Analysis
- Author
-
Karaz, Mahmoud, primary, Teixeira, José Manuel Cardoso, additional, and Amaral, Tatiana Gondim do, additional
- Published
- 2024
- Full Text
- View/download PDF
3. Mitigating Making-Do Practices Using the Last Planner System and BIM: A System Dynamic Analysis.
- Author
-
Karaz, Mahmoud, Teixeira, José Manuel Cardoso, and Amaral, Tatiana Gondim do
- Subjects
CONSTRUCTION & demolition debris ,LEAN construction ,CONSTRUCTION projects ,CONSTRUCTION planning ,PRODUCTION planning - Abstract
Effective waste elimination is critical for the success of construction projects. Although several studies have focused on various aspects of construction waste, limited efforts have yet to investigate the dynamic effect of Making-Do (MD) practices on productivity, rework, defects, and material waste. From a lean construction perspective, this study aims to address MD waste using the Last Planner System (LPS) and BIM. First, the causal structure that can cause MD in construction projects was expressed in a causal loop diagram (CLD), and thematic analysis uncovered the strategies of LPS-BIM to eliminate MD identified by reviewing the literature. Secondly, twenty-five strategies from the LPS and BIM strategies to address MD using structural equation modeling (SEM) were assessed. Subsequently, a system dynamics model (SDM) for investigating LPS-BIM strategies on MD decisions in a construction project was formulated based on the underlying causal loop diagrams and the mathematical relations among the variables. Finally, the model was applied to three projects, and simulations for four LPS-BIM scenarios were carried out. The findings show that dynamic interactions among diverse production planning and control factors are critical in evaluating MD impacts on a construction project. The results demonstrate that the LPS-BIM approach resulted in an average 43.8% reduction in the tasks performed with MD, 45.3% of constraints, 66.5% of construction waste, an increasing 13.7% completion rate, and a 29.3% cost reduction, demonstrating that LPS-BIM is a more efficient solution for MD mitigation and construction planning. This study aims to guide construction planners and policymakers to better manage their production constraints by eliminating negative MD practices from their plans. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
4. A APLICAÇÃO DA INTERNET DAS COISAS E SEUS OS IMPACTOS SOCIOECONÔMICOS NO CONTEXTO DA INDÚSTRIA 4.0: UMA REVISÃO DE LITERATURA
- Author
-
CABRAL, GABRIELLA SILVA, primary, RABELO, DIOGO DE SOUZA, additional, RESENDE, VITOR HUGO MARTINS E, additional, FONSECA, MARCELO NUNES, additional, and AMARAL, TATIANA GONDIM DO, additional
- Published
- 2023
- Full Text
- View/download PDF
5. IMPLEMENTAÇÃO DO LEAN OFFICE NO FLUXO DE PEDIDOS DE UMA INDÚSTRIA DE EMBALAGENS
- Author
-
CABRAL, GABRIELLA SILVA, primary, RABELO, DIOGO DE SOUZA, additional, RESENDE, VITOR HUGO MARTINS E, additional, FONSECA, MARCELO NUNES, additional, and AMARAL, TATIANA GONDIM DO, additional
- Published
- 2023
- Full Text
- View/download PDF
6. APLICAÇÃO DO PROCESSO DE PENSAMENTO DA TEORIA DAS RESTRIÇÕES EM UMA INDÚSTRIA DE EMBALAGENS
- Author
-
CABRAL, GABRIELLA SILVA, primary, RABELO, DIOGO DE SOUZA, additional, RESENDE, VITOR HUGO MARTINS E, additional, FONSECA, MARCELO NUNES, additional, and AMARAL, TATIANA GONDIM DO, additional
- Published
- 2023
- Full Text
- View/download PDF
7. Stein: proposta de um sistema ERP para construção civil
- Author
-
Amaral, Tatiana Gondim do, primary, Silva, Lucas Macedo da, additional, and Silva, Vitor de Almeida, additional
- Published
- 2023
- Full Text
- View/download PDF
8. DIFICULDADES E SOLUÇÕES NA IMPLANTAÇÃO DA NORMA DE DESEMPENHO EM UMA EMPRESA CONSTRUTORA GOIANA
- Author
-
Amaral, Tatiana Gondim do, primary, Fabiano Costella, Marcelo, additional, de Souza Marques, Lahuana Oliveira, additional, and Carraro, Fausto, additional
- Published
- 2022
- Full Text
- View/download PDF
9. Métodos de previsão de demanda de materiais: aplicação em uma empresa de administração pública
- Author
-
Almeida, Rafael Ferreira, primary, Amaral, Tatiana Gondim do, additional, and Silva, Paulo Afonso Lopes da, additional
- Published
- 2022
- Full Text
- View/download PDF
10. Otimização do layout de salas de reunião, no enfrentamento ao COVID-19, por meio do aplicativo web sala planejada
- Author
-
Almeida, Rafael Ferreira, primary, Amaral, Tatiana Gondim do, additional, Silva, Bruno Almeida da, additional, and Miranda, Rafaela da Silveira, additional
- Published
- 2022
- Full Text
- View/download PDF
11. Perdas por making-do na etapa de vistoria e entrega de obra.
- Author
-
Amaral, Tatiana Gondim do, primary, Del Grosso Filho, Renato Rafael, additional, Paula, Gabriella Soares de, additional, and Braga, Pedro Dantas Bezerra, additional
- Published
- 2022
- Full Text
- View/download PDF
12. O desafio da gestão de riscos em canteiros e suas relações com as perdas
- Author
-
Amaral, Tatiana Gondim do, primary, Soares de Paula, Gabriella, additional, Medeiros Maciel, Caio César, additional, Braga, Pedro Dantas Bezerra, additional, and De Paula Barros Neto, José, additional
- Published
- 2022
- Full Text
- View/download PDF
13. Stein: proposta de um sistema ERP para construção civil
- Author
-
Amaral, Tatiana Gondim do, Silva, Lucas Macedo da, and Silva, Vitor de Almeida
- Subjects
model ,software ,diagrama de blocos ,block diagram ,system ,modelo ,Enterprise Resource Planning ,sistema - Abstract
An Enterprise Resource Planning (ERP) is a business management system that allows the integration of a company's information flows. The implementation of ERP systems in the construction industry is highly susceptible to failure, due to the requirements and complexity of the area. With the purpose of developing an effective ERP system, it is necessary to have a prior requirements analysis, in addition to maintaining contact with stakeholders and others involved until the product is delivered. However, several technical choices influence the final quality of the product and no technical proposals that can help in these choices have been identified in the literature. Thus, the objective of this study is to propose an architecture for the system’s implementation, in the format of a block diagram model to help in the construction of an ERP, defining the main software modules that an ERP system must have. The proposed model is based on microservices architecture. The system’s modules and their communication flow were surveyed and listed in order to avoid technical problems encountered during the software life cycle. Technologies that can be used to build the ERP, such as REST API and Database, are also suggested., Um Enterprise Resource Planing (ERP) é um sistema de gestão empresarial que permite integrar os fluxos de informação de uma empresa. A implantação de sistemas ERP na construção civil é altamente suscetível a falhas, devido aos requisitos e à complexidade da área. Com o propósito de desenvolver um sistema ERP efetivo, é necessário ter uma análise de requisitos prévia, além de manter o contato com os interessados e demais envolvidos até a entrega do produto. Contudo, diversas escolhas técnicas influenciam na qualidade final do produto, e não foram identificadas na literatura propostas técnicas que auxiliem nessas escolhas. Dessa forma, o objetivo do presente trabalho é propor uma arquitetura para a implementação do sistema, no formato de um modelo de diagrama de blocos, para auxiliar na construção de um ERP, definindo os principais módulos de software que esse sistema deve possuir. O modelo proposto é baseado na arquitetura de microsserviços. Foram levantados e elencados os módulos do sistema e seu fluxo de comunicação, de modo a evitar problemas técnicos encontrados durante o ciclo de vida do software. Também foram sugeridas tecnologias que podem ser utilizadas para a construção do ERP, tais como API REST e banco de dados.
- Published
- 2022
14. Relations Between Preconditions, Categories and Impacts of Making-Do Wastes
- Author
-
Amaral, Tatiana Gondim do, primary, Braga, Pedro Dantas Bezerra, additional, Vieira, Sara Vieira, additional, and Neto, José de Paula Barros, additional
- Published
- 2022
- Full Text
- View/download PDF
15. APLICAÇÃO DO MAPEAMENTO DE FLUXO DE VALOR PARA REDUÇÃO DOS DESPERDÍCIOS DA PRODUÇÃO: ESTUDO DE CASO DE UMA FÁBRICA DE ARTEFATOS DE SOLO-CIMENTO
- Author
-
Amaral, Tatiana Gondim do, primary and de Carvalho Araújo, Flávio, additional
- Published
- 2022
- Full Text
- View/download PDF
16. GESTÃO DA INFORMAÇÃO SOBRE O PROCESSO DE COMPRAS DE PASSAGENS AÉREAS NA UNIVERSIDADE FEDERAL DE GOIÁS
- Author
-
Silva, Paulo Cezar Bispo da, Universidade Federal de Goiás, Costa, Ana Luiza Macêdo, Barreto, Beatriz Carvalho, Amaral, Tatiana Gondim do, and Universidade Federal de Goiás
- Abstract
A informação representa um valor que se entregue em conformidade às demandas de seus usuários, gera competitividade. Os conceitos de qualidade da informação, aplicados ao seu fluxo, quando gerenciado pelas organizações, agilizam processos decisórios. O objetivo deste artigo é evidenciar o impacto da variabilidade no processo de compras de passagens aéreas de uma instituição federal de ensino superior e demonstrar a viabilidade da aplicação dos princípios da mentalidade enxuta e gestão da informação ao processo. Inicialmente, foi realizada uma revisão da literatura em trabalhos nacionais e internacionais que abordassem Lean Thinking, Lean Office, Lean Information, variabilidade e mapeamento de processos. A partir da literatura encontrada foi possível realizar o mapeamento de todo o processo de compras, desde a solicitação até a efetiva emissão das passagens aéreas, identificando as causas de variabilidade, desperdícios e oportunidades de melhoria. Pôde-se observar que o processo perde eficiência na medida em que as etapas do mesmo têm acréscimo de variação, diminuindo seu fluxo contínuo e aumentando o tempo total do processo, o que impacta diretamente no valor das passagens, pois quanto maior o tempo do processo e menor a antecedência das compras, maior foi a média de preços das passagens.
- Published
- 2022
17. Analysis of sales of vertical residential real estate projects in Goiânia and its influencing factors
- Author
-
Amaral, Tatiana Gondim do, primary, Kafuri, Roberto Sebba, additional, Oliveira, Marcelo Leite, additional, Kafuri, Matheus Ramos, additional, and Medrano, Ronny Marcelo Aliaga, additional
- Published
- 2022
- Full Text
- View/download PDF
18. Tecnologias digitais utilizadas pela indústria da construção civil
- Author
-
Silva, Larissa Eterna Taveira, primary, Sousa, Talyssa Viana de, additional, Silva, Victor Venâncio da, additional, and Amaral, Tatiana Gondim do, additional
- Published
- 2021
- Full Text
- View/download PDF
19. Comparações entre casos tradicional e BIM sob uma perspectiva Lean
- Author
-
Rodrigues, Marília Guimarães, primary, Ito, Ana Paula Nishimoto, additional, Amaral, Tatiana Gondim do, additional, and Galvão, Iara Luiza Vieira Pereira, additional
- Published
- 2021
- Full Text
- View/download PDF
20. Diretrizes para minimização de perdas por making-do
- Author
-
Amaral, Tatiana Gondim do, primary, Mendes, Marco Antônio Pereira, additional, and Alvarenga, Nathália De Podestà Leite de, additional
- Published
- 2021
- Full Text
- View/download PDF
21. Avaliação do lean score de uma empresa construtora de Goiânia por meio da ferramenta Lean Construction Assessment Tool (LCAT)
- Author
-
Amaral, Tatiana Gondim do, primary and Castro, Amanda Arruda de, additional
- Published
- 2021
- Full Text
- View/download PDF
22. Prevenção ao Covid-19 em canteiro de obras
- Author
-
Carrijo, Andrielly Cristine Rodrigues, primary, Rodrigues, Jorge Luiz Monteiro, additional, Silva, Larissa Eterna Taveira e, additional, Damascena, Sara Daniel Matias, additional, and Amaral, Tatiana Gondim do, additional
- Published
- 2021
- Full Text
- View/download PDF
23. Análise das lives enquadradas na área de gestão e economia da construção realizadas durante a pandemia da covid-19
- Author
-
Cruz, Herbert Melo, primary, Amaral, Tatiana Gondim do, additional, Santos, Davi Nascimento dos, additional, Alves, Marina Ribeiro Saboia, additional, Santos, Debora de Gois, additional, and Heineck, Luiz Fernando Mahlmann, additional
- Published
- 2021
- Full Text
- View/download PDF
24. Proposta de aplicação do target costing no processo de projetos de empreendimentos imobiliários em Goiânia
- Author
-
França Filho, Eduardo Noronha, primary, Amaral, Tatiana Gondim do, additional, and Ulhôa, Ulisses Guimarães, additional
- Published
- 2021
- Full Text
- View/download PDF
25. Business intelligence e sistemas nebulosos na definição de lean score
- Author
-
Braga, Pedro Dantas Bezerra, primary, Amaral, Tatiana Gondim do, additional, and Melo, Reymard Sávio Sampaio de, additional
- Published
- 2021
- Full Text
- View/download PDF
26. Propuesta de sistema de medición de desempeño de gestión para una empresa de diseño arquitectónico
- Author
-
Amaral, Tatiana Gondim do and Ramos Sousa, Maressa
- Subjects
sistema de medición ,medición de desempeño ,indicadores ,monitoreo ,empresa del proyecto ,Sistema de medição ,Medição de desempenho ,Indicadores ,Monitoramento ,Empresa de projetos ,Measuring system ,Measuring performance ,Indicators ,Monitoring ,Project firm - Abstract
Over the years, several changes have created a favorable context for the implementation of performance measurement systems (SMD) in organizations, which has led to a research diversity related to the topic. Moreover, in the construction sphere, a vast literature on SMD has been found, however, within the architectural firms’ scopes, just a few have been explored. Therefore, a qualitative exploratory research has been developed, whose main objective is to propose an SMD for an architectural firm. Furthermore, for this case study and data collection, a questionnaire and a semi-structured interview have been applied. Subsequently, the SMD have been proposed to the company. Indeed, the categories which have been adopted as indicators were stakeholders, efficiency, quality, innovation and sustainability, and the result, which have provided a framework applicable to both, the management improvement of the studied enterprise and also to the implementation in other organizations., Con los años, varios cambios han creado un contexto favorable para la implementación de sistema de medición del desempeño en las organizaciones, lo que ha llevado a una diversidad de investigaciones relacionadas con el tema. Específicamente en la construcción civil, se encuentra una vasta literatura sobre sistemas de medición del desempeño, sin embargo, poco se investiga en el ámbito de las empresas de arquitectura. En vista de lo anterior, se desarrolló una investigación cualitativa de naturaleza exploratoria, cuyo objetivo principal es la propuesta de un sistema de medición del desempeño para una empresa de diseño arquitectónico. Para la recolección de datos, se aplicó un cuestionario y una entrevista semiestructurada. Posteriormente, se propuso un sistema de medición del desempeño para la empresa. Las categorías adoptadas para los indicadores fueron: partes interesadas, eficiencia, calidad, innovación y sostenibilidad, y resultados, que proporcionaron una estructura aplicable tanto para mejorar la gestión de la empresa estudiada, como para su implementación en otras empresas., Ao longo dos anos, diversas mudanças criaram um contexto favorável para a implementação de sistemas de medição de desempenho (SMD) nas organizações, o que conduziu a uma diversidade de pesquisas relacionadas ao assunto. Na esfera da construção civil, uma vasta literatura sobre SMD é encontrada, entretanto, pouco se investiga no âmbito das empresas de arquitetura. Diante do exposto, foi desenvolvida uma pesquisa qualitativa, de caráter exploratório, cujo principal objetivo é a proposição de um SMD para uma empresa de projetos de arquitetura. Para o levantamento de dados, foram aplicados um questionário e uma entrevista semiestruturada. Posteriormente, foram propostos o SMD inicial e o final após a validação da empresa. As categorias adotadas para os indicadores foram: stakeholders, eficiência, qualidade, inovação e sustentabilidade, e resultado, que proporcionaram uma estrutura aplicável tanto para o aprimoramento da gestão da empresa estudada, quanto para a implementação em outras empresas.
- Published
- 2020
27. Dynamic method to identify and analyze waste by making-do in construction sites
- Author
-
Amaral, Tatiana Gondim do, primary, Braga, Pedro Boaratti, additional, Elias, Karinny Vieira, additional, and Brandão, Camila Mariana, additional
- Published
- 2021
- Full Text
- View/download PDF
28. Analysis of Making-Do Waste at Construction Site in Fortaleza, Ceará, Brazil
- Author
-
Santos, Éden Malveira dos, primary, Fontenele, Amanda Daniel, additional, Machado, Amanda Moreira Lima, additional, Neto, José de Paula Barros, additional, and Amaral, Tatiana Gondim do, additional
- Published
- 2020
- Full Text
- View/download PDF
29. Proposta de sistema de medição de desempenho gerencial para uma empresa de projetos de arquitetura
- Author
-
Amaral, Tatiana Gondim do, primary and Ramos Sousa, Maressa, additional
- Published
- 2020
- Full Text
- View/download PDF
30. APLICAÇÃO DA FERRAMENTA DE AVALIAÇÃO DA IMPLEMENTAÇÃO DA CONSTRUÇÃO ENXUTA EM TRÊS EMPRESAS CONSTRUTORAS GOIANAS
- Author
-
Amaral, Tatiana Gondim do, primary, Paiva, Lucas Barros de, additional, Paula, Rafael Figueiredo de, additional, and Nobre, Rodrigo Fernandes, additional
- Published
- 2020
- Full Text
- View/download PDF
31. ANÁLISE DA APLICAÇÃO DA FERRAMENTA LEAN CONSTRUCTION ASSESSMENT TOOL (LCAT) EM UMA EMPRESA CONSTRUTORA GOIANA
- Author
-
Amaral, Tatiana Gondim do, primary, Zalaf, Felipe Schmaltz, additional, and Teixeira, Lara Gomes Fleury, additional
- Published
- 2020
- Full Text
- View/download PDF
32. E-book Heineck.pdf
- Author
-
Pergher, Renan Dinis, Freitas, Maria Do Carmo Duarte, and Amaral, Tatiana Gondim Do
- Abstract
Livro de Homenagem e Memorias dedicado ao Professor Luiz Fernando Mallmann Heineck
- Published
- 2019
- Full Text
- View/download PDF
33. IDENTIFICAÇÃO DE PERDAS POR IMPROVISAÇÃO EM CANTEIROS DE OBRAS
- Author
-
Amaral, Tatiana Gondim do, primary, Brandão, Camila Mariana, additional, and Elias, Karinny Vieira, additional
- Published
- 2019
- Full Text
- View/download PDF
34. Análise comparativa de um estudo de caso em dimensionamento do pulmão do projeto em uma obra da construção civil.
- Author
-
SANTANA, JOSE RENATHO DA SILVA, primary, RESENDE, VITOR HUGO MARTINS E, additional, SOUSA, MARCOS ANTONIO DE, additional, AMARAL, TATIANA GONDIM DO, additional, and PEREIRA, KHEROLAYNE CRISTHYAN DE SOUSA CASTRO, additional
- Published
- 2017
- Full Text
- View/download PDF
35. APLICAÇÃO DO MFV E CARACTERIZAÇÃO DAS ATIVIDADES DE FLUXO DO PROCESSO DE EXECUÇÃO DE ALVENARIA CONVENCIONAL
- Author
-
Amaral, Tatiana Gondim do, primary, Resende, Fabiana Barbosa de, additional, and Camargo Filho, Carlos Augusto Bouhid de, additional
- Published
- 2017
- Full Text
- View/download PDF
36. Gestão de projetos e sua interface com o canteiro de obras sob a ótica da Preparação da Execução de Obras (PEO)
- Author
-
Arrotéia, Aline Valverde, Amaral, Tatiana Gondim do, and Melhado, Silvio Burranttino
- Subjects
Design management ,Preparação da Execução de Obras ,Gestão de Projetos ,Building pre-construction ,Coordenação pró-ativa ,Communication ,Pro-active coordination ,Canteiro de Obras ,Construction site ,Comunicação ,Management - Abstract
Nos últimos 20 anos, o setor da construção civil no Brasil evoluiu significativamente em resposta ao crescimento da competitividade no mercado. Entretanto, nesse processo de evolução ainda têm sido encontradas barreiras culturais e organizacionais, e, sobretudo, dificuldades nos esforços voltados à qualidade nos canteiros de obras. Aliada a este quadro, a falta de integração entre as atividades de projetar e construir provoca uma série de desperdícios, patologias, retrabalhos e alterações improvisadas decorrentes de projetos não compatibilizados, ora por ausência de detalhes nos projetos, ora por decisões tomadas por pessoas não capacitadas em momentos inadequados. O presente trabalho tem como objetivo geral discutir a implementação do método da preparação da execução de obras (PEO) a fim de melhorar a qualidade na interface projeto-execução de obras. O método de pesquisa adotado para o desenvolvimento deste trabalho é classificado como qualitativo e foi realizada por meio de pesquisa-ação. Os resultados obtidos com a realização da pesquisa comprovaram a eficácia do método da PEO e a sua viabilidade na melhoria da gestão da interface projeto-execução de obras, em empresas de incorporação e construção de edifícios. During the past twenty years, the construction industry in Brazil has evolved significantly in response to the market's growing competitiveness. However, in this evolution, there have been several cultural and organizational barriers, and difficulties in the effort to improve quality in construction sites. Besides, the lack of integration between design andconstruction processesresults in waste, pathologies, rework and improvised changes originated fromclashes indesign, either due to lack of design detailing or to decisions being taken by unskilled staff at inappropriate moments. The aim of this study is to discuss the implementation of the Building Pre-Construction Management (PCM) method, in order to improve the management of the design process in its interface with the construction site. The research method adoptedin this study can be classified as qualitative and it was conducted through action-research. The results indicated that the effectiveness and feasibility of using PCM to improve the management of the design-construction interface, in real estate and building companies.
- Published
- 2014
37. Gestão do projeto e sua interface com o canteiro de obras sob a ótica da preparação da execução de obras (PEO)
- Author
-
Arrotéia, Aline Valverde, Amaral, Tatiana Gondim Do, and Melhado, Silvio Burrattino
- Published
- 2013
- Full Text
- View/download PDF
38. Gestão de projetos e sua interface com o canteiro de obras sob a ótica da Preparação da Execução de Obras (PEO)
- Author
-
Arrotéia, Aline Valverde, primary, Amaral, Tatiana Gondim do, additional, and Melhado, Silvio Burranttino, additional
- Published
- 2014
- Full Text
- View/download PDF
39. Metodologia de qualificação para trabalhadores da construção civil com base nos conhecimentos gerenciais da construção enxuta
- Author
-
Amaral, Tatiana Gondim do, Universidade Federal de Santa Catarina, and Roman, Humberto Ramos
- Subjects
Aprendizagem ,Mao-de-obra qualificada ,Trabalhadores da construcao ,Engenharia civil ,Metodologia - Abstract
Tese (doutorado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia Civil. O trabalho parte de uma nova categorização dos conceitos lean criada evolutivamente a partir dos ensinamentos de Womack e Jones, Koskella e Ghinato, propondo a ênfase em ações gerenciais ligadas a seis áreas principais, a saber: ciclo, fluxo, coordenação do processo, valor, melhoria contínua e qualidade de vida no trabalho. Estes elementos são desdobrados na forma de ementas para cursos de qualificação da mão-de-obra na construção civil. Mostra-se o resultado da aplicação do programa de qualificação em uma empresa edificadora da cidade de Florianópolis, durante cerca de um ano. Foi necessário inicialmente conduzir a estabilização dos processos em obra, por meio de programas básicos de 5S, padronização dos procedimentos e melhorias gerenciais na área de suprimentos de materiais e seu controle. A partir daí foram introduzidas as noções de pacote de trabalho, definição de atividades, encadeamento de fluxos, programação e controle das atividades no curto prazo, valor para o cliente, ciclo PDCA e, de maneira inovadora, as repercussões do trabalho sobre a qualidade de vida no trabalho. A sistemática de implantação do qualificação é descrita, assim como a avaliação pelos operários.
- Published
- 2004
40. Elaboração e aplicação de um programa de treinamento para trabalhadores da indústria da construção civil
- Author
-
Amaral, Tatiana Gondim do, Universidade Federal de Santa Catarina, Jungles, Antonio Edesio, and Rocha, Janaide Cavalcante
- Subjects
Treinamento ,Controle de qualidade ,Planejamento de mão de obra ,Teses ,Trabalhadores da construção ,Construção civil - Abstract
Dissertação (Mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico.
- Published
- 1999
41. Planning and control of construction work's physical schedule by critical chain in Ms Project
- Author
-
Resende, Vitor Hugo Martins e, Amaral, Tatiana Gondim do, Amaral , Tatiana Gondim do, Brandstetter, Maria Carolina Gomes de Oliveira, and Machado, Ricardo Luiz
- Subjects
Project management ,Construction work planning ,Critical chain ,Ms Project ,Habitação de interesse social ,Planejamento de obra ,Real estate undertakings of social interest ,CONSTRUCAO CIVIL [ENGENHARIA CIVIL] ,Corrente crítica ,Gestão de projetos - Abstract
Observa-se que, mesmo com a diversidade de ferramentas computacionais, aliada à gestão, constata-se a ineficiência no cumprimento dos prazos de projetos na construção civil. Diversos estudos apontam para as falhas no gerenciamento de projetos, destacando-se a existência de problemas relacionados ao planejamento e controle em obras, como os mais recorrentes. A corrente crítica é uma aplicação da teoria das restrições em gerenciamento de projetos que tem como objetivo atender aos prazos estipulados, por meio do gerenciamento do consumo dos pulmões. Diante desse contexto, a presente pesquisa avalia a aplicação da metodologia da corrente crítica, em um planejamento físico, utilizando o Ms Project como software de gestão, em uma empresa da construção civil. A metodologia utilizada classifica-se como estudo de caso e foi realizada em dois empreendimentos, localizados nas cidades de Guapó e de Palmeiras de Goiás, Estado de Goiás. De acordo com a pesquisa, quanto à aplicação na construção civil, os resultados apontam que a Critical Chain Project Management (CCPM) pode ser aplicada cumprindo todos os passos preconizados pela teoria. Quanto ao cumprimento do prazo do projeto, a pesquisa mostrou que, em empresas com problemas acentuados de planejamento e financeiros, os atrasos continuam. No aspecto financeiro, pode-se constatar que o aumento no tempo de repasse financeiro pelo órgão financiador, ligado ao Governo Federal, para a empresa, impactou diretamente no planejamento da aquisição de materiais, de equipamentos e mão de obra. A metodologia da corrente crítica se mostrou aplicável ao setor da construção civil e ao software Ms Project, mas com limitações. Dentre as limitações, destaca-se a aplicação em cronogramas muito extensos e a realização dos passos sem o auxílio de funções automáticas ou denominado, nesta pesquisa, de método “manual”, no Ms Project. Como solução para essa limitação, a pesquisa apresenta a utilização do Ms Project para a corrente crítica, por meio de rotinas automáticas (macros). Como resultados, no método “manual” se percebe um tempo significativamente elevado, comparado com o automático, além da possibilidade de inserção de erros de dados e de retrabalhos. No método automático, o tempo é reduzido e os erros e retrabalhos são eliminados. Tanto no método “manual”, quanto no método automático, os passos de criação de pulmões de convergência e o início tardio das tarefas não são viáveis para cronogramas extensos, característicos para empreendimentos habitacionais de interesse social. We noticed that even with the diversity of computational tools, along with the management, a lack of efficiency in meeting project deadlines in construction work. Several studies indicate failures in project management, highlighting the existence of problems related to planning and control of construction works, as the most recurring. The critical chain is an application of the theory of constraints in project management that aims to meet the deadlines, through the lungs management of consumption. In this context, the present study evaluates the implementation of the critical chain methodology in a physical planning using Ms Project as management software, in a construction work company. The methodology used was a case study and was conducted in two projects, located in the cities of Guapó and Palmeiras de Goiás, in the State of Goiás. According to the study, as the application in construction work, the results show that the Critical Chain Project Management (CCPM) can be applied in compliance with all steps recommended by the theory. Regarding the fulfillment of the project’s deadline, the study showed that in companies with emphasized problems in planning and financing, delays continue. In the financial aspect, we noticed that the delay in transferring funds by the funding agency, attached to the Federal Government, to the company impacted directly on planning the purchase of materials, equipment and workforce. The methodology of critical current proved to be applicable to the construction work sector and the Ms Project software, but with limitations. Among the limits, it is worth mentioning the use in very extensive schedules and the carrying out of steps without the aid of automatic functions or the method known as "manual", in Ms Project. As a solution to this limitation, the study presents the use of Ms Project on critical chain using automatic routines (macros). As a result, while using the "manual" it was noticed a significantly higher period of time, compared with the automatic, in addition to the possibility of errors in data entry and reworking. In automatic method, the time is reduced and errors and reworking are eliminated. Both in the "manual" method, as the automatic method, the steps of creating convergence lungs and the late start of the tasks are not feasible for long schedules, which are characteristic of real estate undertakings of social interest.
- Published
- 2015
42. Saúde mental em tempos de pandemia: um programa de comunicação interna de atenção à saúde do servidor da Universidade Federal de Goiás
- Author
-
Barreto, Beatriz Carvalho, Bevilacqua, Solon, Amaral, Tatiana Gondim do, and Martins, Elvis Silveira
- Subjects
Educação ,Communication ,Public sector ,COVID-19 ,Setor público ,Mental health ,Saúde mental ,ADMINISTRACAO::ADMINISTRACAO PUBLICA::ORGANIZACOES PUBLICAS [CIENCIAS SOCIAIS APLICADAS] ,Comunicação ,Education - Abstract
Em conjunto com as ações emergenciais de saúde pública, para controlar a pandemia do novo coronavírus que surgiu na China em 2019 e se espalhou rapidamente por todo o mundo no início de 2020, há vários esforços emergenciais para reduzir o impacto negativo na saúde mental dos trabalhadores. No contexto da educação, a pandemia impôs o isolamento social como medida preventiva, visto que os ambientes educacionais possuem alto fluxo de pessoas. Este cenário também alterou a rotina dos servidores da Universidade Federal de Goiás, instituição pública de ensino superior. Neste sentido, o objetivo deste estudo é compreender se existe uma relação de impacto entre a pandemia de Covid-19 e a saúde mental dos servidores e como a comunicação pode contribuir para a redução do impacto da pandemia na saúde mental dos servidores da UFG? Primeiramente, pretende-se caracterizar o sofrimento psíquico dos servidores. A metodologia utilizada faz a análise de dados secundários, oriundos de uma pesquisa institucional realizada pela UFG, por meio do estudo de caso, que consiste em utilizar técnicas de levantamento e análise de informações de múltiplas fontes com o objetivo de aprofundar nas questões de um único grupo. Foi realizada uma análise descritiva dos dados, distribuição de frequência e análise de correspondência para as variáveis com as mesmas categorias de respostas. As análises de dados foram realizadas a partir do sistema Sphinx®. Com isso, pretende-se propor medidas para reduzir o impacto negativo da pandemia na saúde mental da comunidade acadêmica profissional, por meio da proposição de um programa de comunicação interna de atenção à saúde do servidor da UFG. Com base neste estudo, percebeu-se que há uma relação de impacto entre a pandemia de Covid-19 e a saúde mental dos servidores da universidade, além disso, o regime de trabalho, à medida que inseriu a maior parte dos servidores da UFG em trabalho remoto, também se configurou como catalisador de transtornos mentais como ansiedade, depressão e outros. Há de se considerar também que alguns grupos de servidores sentiram os efeitos dessas medidas em maior nível como os idosos, os profissionais que possuem filhos, em especial, os indivíduos do gênero feminino, e os terceirizados. In conjunction with emergency public health actions to control a pandemic of the new coronavirus that emerged in China in 2019 and spread rapidly around the world in early 2020, there are several emergency efforts to reduce the negative impact on workers' mental health. In the context of education, the pandemic imposed social isolation as a preventive measure, as educational environments have a high flow of people. This scenario also changes the routine of employees at the Federal University of Goiás, a public higher education institution. In this sense, the objective of this study is to understand if there is an impact relationship between the Covid-19 pandemic and the mental health of the servers and how can communication contribute to reducing the impact of the pandemic on the mental health of the UFG servers? First, it is intended to characterize the psychological suffering of the servers. The methodology used analyzes secondary data from an institutional survey carried out by the UFG, through the case study, which consists of using techniques for surveying and analyzing information from multiple sources in order to deepen the issues of a single group. A descriptive analysis of the data, frequency distribution and correspondence analysis was performed for the variables with the response categories. Data analyzes were performed using the Sphinx® system. With this, it is intended to propose measures to reduce the negative impact of the pandemic on the mental health of the professional academic community, through the proposition of an internal communication program for the health care of the UFG civil servants. Based on this study, it is examined that there is an impact relationship between the Covid-19 pandemic and the mental health of university employees, in addition to the work regime, as it included most UFG employees in Remote work has also been configured as a catalyst for mental disorders such as anxiety, depression and others. It must also be considered that some groups of servants felt the effects of these measures at a higher level, such as the elderly, professionals who have children, especially those belonging to the female gender and outsourced workers.
- Published
- 2021
43. Financial education as mitigation of over-indebtedness: a case study with public servants
- Author
-
Orozimbo Júnior, Makário Luiz, Bevilacqua, Sólon, Bevilacqua, Solón, Amaral, Tatiana Gondim do, Siqueira, Paulo Henrique de Lima, and Soares, Julio Cesar Valandro
- Subjects
Indebtedness ,Risk behavior ,Financial education ,Comportamento de risco ,Educação financeira ,Endividamento ,ADMINISTRACAO::ADMINISTRACAO PUBLICA [CIENCIAS SOCIAIS APLICADAS] - Abstract
O endividamento das famílias vem crescendo nos últimos anos e esta questão se agrava ainda mais quando são analisados os dados sobre a capacidade de pagamento das dívidas deste núcleo. Os servidores, público-alvo da pesquisa e por possuírem características específicas em seu regime de trabalho, como a estabilidade, enfrentam desafios relevantes em manter uma vida financeira saudável. Nesta pesquisa, investiga-se as dimensões que determinam a mitigação do superendividamento e através da análise de dados torna-se possível apontar a educação financeira como solução para reduzir os danos da falta de controle e planejamento de recursos. Uma amostra de 258 participantes foram entrevistados e informações obtidas através da análise fatorial evidenciaram que o costume de comparar opções de crédito é fator preponderante para o sucesso do equilíbrio financeiro. Os achados são originais, visto que coloca em segundo plano evidências consagradas como o autocontrole para o sucesso das finanças pessoais. A técnica de Regressão Logística indicou robustez do modelo que pode ser utilizado para predições no âmbito da Educação Financeira. Contribuições teóricas e práticas foram registradas quando um questionário com 54 questões é validado para problemáticas de endividamento e educação financeira. The indebtedness of families has been growing in recent years and this issue worsens even more when data on the ability to pay debts of this core are analyzed. The servers, the target audience of the research and because they have specific characteristics in their work regime, such as stability, face relevant challenges in maintaining a healthy financial life. In this research, we investigate the dimensions that determine the mitigation of over-indebtedness and through data analysis it is possible to point out financial education as a solution to reduce the damage of lack of control and resource planning. A sample of 258 participants were interviewed and information obtained through factor analysis showed that the custom of comparing credit options is a major factor for the success of the financial balance. The findings are original, since it puts in the background established evidence as self-control for the success of personal finances. The Logistic Regression technique indicated robustness of the model that can be used for predictions in the context of Financial Education. Theoretical and practical contributions were recorded when a questionnaire with 54 questions is validated for debt and financial education issues.
- Published
- 2021
44. Integration of augmented reality to the bim 4d model for monitoring and controlling the work
- Author
-
Vilela, Cesar Augusto da Cunha, Machado, Ricardo Luiz, Carneiro, Marcos Lajovic, and Amaral, Tatiana Gondim do
- Subjects
Realidade aumentada ,BIM ,monitoramento e controle de obra ,construção civil ,Augmented reality ,construction site control ,Engenharia de Produção [Engenharias] - Abstract
Submitted by admin tede (tede@pucgoias.edu.br) on 2020-07-23T19:07:43Z No. of bitstreams: 1 Cesar Augusto da Cunha Vilela.pdf: 5093465 bytes, checksum: b067c6bea9df07d4542c464dbdc71d48 (MD5) Made available in DSpace on 2020-07-23T19:07:43Z (GMT). No. of bitstreams: 1 Cesar Augusto da Cunha Vilela.pdf: 5093465 bytes, checksum: b067c6bea9df07d4542c464dbdc71d48 (MD5) Previous issue date: 2019-11-06 The need for systematic data collection and processing to generate real-time progress information is increasingly important as it assists decision-making more quickly and assertively. Building Information Modeling (BIM) provides the benefit of aggregating information about the construction site on a single platform and making it possible to control its execution schedule. Augmented reality (RA), in turn, emerges to enhance BIM in relation to the reality visualization of the construction site, supplying the interoperability gaps between technologies through the automatic processing and absorption of the information. In this context, the main objective of this work was to construct a system for collecting information on the progress of civil construction works, using RA and BIM. Through the adoption of a methodological approach based on Design Science Research (DSR), we sought to solve the problem of collecting data regarding the progress of the work through a model of integration of technologies in a collaborative way. The results showed that the proposed model improved the data collection process, ensuring data traceability and reliability, accelerated the manager's analysis process in decision-making and the as-built update in a week, the data transmission took place automatically. However, the RA technology used for the collection presented problems of precision and occlusion of the images with the real object. However, these problems did not present problems of meaning and identification of the information that can result in errors of project updates, schedules and executions. A necessidade de coleta e processamento sistemático de dados para gerar informações do progresso da obra em tempo real é cada vez mais importante pois auxilia na tomada de decisão de maneira mais rápida e assertiva. A modelagem da informação da construção (BIM) proporciona o benefício de agregar as informações sobre as obras em uma única plataforma e viabilizar o controle de seu cronograma de execução. A realidade aumentada (RA), por sua vez, surge para potencializar o BIM em relação à visualização da realidade do canteiro de obras, suprindo as lacunas de interoperatividade entre tecnologias através do processamento e absorção automática das informações. Inserido nesse contexto, este trabalho teve como objetivo principal construir um sistema de coleta de informações sobre o progresso de obras do setor da construção civil, utilizando RA e o BIM. Através da adoção de uma abordagem metodológica baseada na Design Science Research (DSR) buscou-se solucionar o problema de coleta de dados referente ao progresso da obra através de um modelo de integração de tecnologias de forma colaborativa. Os resultados obtidos indicaram que o modelo proposto aperfeiçoou o processo de coleta de dados, garantindo rastreabilidade e confiabilidade nos dados, reduzindo o tempo de análise de alteração e atualização da as-built. Contudo, a tecnologia RA usada para a coleta apresentou problemas de precisão e oclusão das imagens com o objeto real. Porém, esses problemas não trouxeram implicações de significado e identificação das informações que possam resultar em erros de atualizações de projetos, cronogramas e execuções.
- Published
- 2019
45. Real Estate Price and Sales Valuation Using Big Data
- Author
-
Correa, Sara Rodrigues, Machado, Ricardo Luiz, Pasqualeto, Antônio, and Amaral, Tatiana Gondim do
- Subjects
Big Data, Mercado Imobiliário, Análise de Regressão Linear Múltipla ,ENGENHARIA DE PRODUCAO [ENGENHARIAS] ,Big Data, Real Estate, Multiple Linear Regression Analysis - Abstract
Submitted by admin tede (tede@pucgoias.edu.br) on 2019-09-25T18:07:03Z No. of bitstreams: 1 Sara Rodrigues Correa .pdf: 2304221 bytes, checksum: c12f69cf657ddbd523d81caa1b254b6a (MD5) Made available in DSpace on 2019-09-25T18:07:03Z (GMT). No. of bitstreams: 1 Sara Rodrigues Correa .pdf: 2304221 bytes, checksum: c12f69cf657ddbd523d81caa1b254b6a (MD5) Previous issue date: 2019-03-14 Organizational decisions have been guided by data analyzes, which gain more relevance each day. Interest in Big Data grows as the companies applying Big Data deliver significant results. In this context, it is vital to take advantage of the opportunities arising from data analysis. Some of the benefits to the real estate industry are the ability to identify trends and patterns of buying and selling, this trends have helped develop more effective selling strategies. For this, the objective of this work was to analyze which factors influence the prices and volumes of real estate sales and how to obtain an equation that models the functioning of these phenomena. The approach adopted to carry out the modeling proposed in this work was based on the analysis of multiple linear regression. As main results, it was found that the models generated for sales price forecasts presented dispersions in relation to real market values varying from 2% to 11%. The models for sales volume forecasts presented perfect adjustments in relation to market behavior. As conclusions, it was found that the use of Big Data in the real estate market reduces the risks in the decision-making process for the developers in relation to the launch of new ventures Decisões organizacionais têm sido guiadas por análises de dados, que ganham mais relevância a cada dia. O interesse no Big Data cresce à medida que as empresas que o utilizam apresentam resultados expressivos. Nesse contexto, torna-se vital aproveitar as oportunidades advindas da análise de dados. Alguns dos benefícios para o setor imobiliário é a capacidade de identificar tendências e padrões de compra e venda de imóveis que auxiliaram no desenvolvimento de estratégias de venda mais efetivas. Para isso, o objetivo deste trabalho foi analisar quais fatores influenciam os preços e os volumes de vendas de imóveis e como se pode obter uma equação que modele o funcionamento desses fenômenos. A abordagem adotada para realizar a modelagem proposta neste trabalho foi baseada na análise de regressão linear múltipla. Como principais resultados, constatou-se que os modelos gerados para previsões de preços de vendas apresentaram dispersões em relação aos valores reais de mercado variando de 2% a 11%. Já os modelos destinados às previsões de volumes de vendas apresentaram ajustes perfeitos em relação ao comportamento do mercado. Como conclusões, verificou-se que a utilização do Big Data no mercado imobiliário diminui os riscos no processo de tomada de decisão para as incorporadoras em relação ao lançamento de novos empreendimentos
- Published
- 2019
46. LCAT: assessment tool of lean construction implementation
- Author
-
Camargo Filho, Carlos Augusto Bouhid de, Amaral, Tatiana Gondim do, Silva, Frederico Martins Alves da, and Barros Neto, José de Paula
- Subjects
Lean construction ,Lean tools ,Ferramentas lean ,Degree of implementation ,Construção enxuta ,Grau de implementação ,Lean production ,Produção enxuta ,CONSTRUCAO CIVIL [ENGENHARIA CIVIL] - Abstract
O uso de ferramentas para a análise da implementação e uso de práticas e princípios da construção enxuta é extremamente necessário para que estas sejam bem-sucedidas e tragam os resultados esperados. Para isso, a ferramenta a ser utilizada deve ser adequada e capaz de aferir da melhor maneira possível o real estado da empresa construtora frente à filosofia enxuta. O objetivo desse trabalho é desenvolver uma ferramenta de avaliação do grau de implementação da construção enxuta em empresas construtoras. A LCAT (Lean Construction Assessment Tool) foi desenvolvida com base em outras ferramentas anteriormente propostas com o intuito de suprir as carências por elas apresentadas, principalmente no tratamento estatístico e na fidelidade dos resultados. Utilizando-se de análise multivariada de dados, foram feitas duas grandes revisões no formulário, que, de acordo com testes comparativos realizados, aumentaram seu nível de replicação e aplicabilidade. Como resultado secundário, avaliou-se as empresas participantes das aplicações frente à implementação da construção enxuta. Percebeu- se que as empresas, em sua grande maioria, ainda não aplicam conceitos e ferramentas da construção enxuta, sendo que foram encontradas evidências de aplicação apenas de práticas com interface com outras áreas de gestão, como qualidade e planejamento. The use of tools to analyze the implementation and use of practices and principles of lean construction is extremely necessary for them to be successful and bring the expected results. Therefore, the tool which is going to be used must be adequate and capable of measuring in the best possible way the real state of the construction company against lean philosophy. This research's objective is to develop a tool to evaluate the degree of implementation of the lean construction in building companies. The LCAT (Lean Construction Assessment Tool) has been developed based on other tools previously proposed with the aim of supply the deficiencies presented by them, mainly the absence of statistical treatment and in the fidelity of the results. Using multivariate data analysis techniques, such as hierarchical group analysis, form revisions were performed, which, according to the comparative tests executed, increased their level of replication and applicability. The evaluation form was analyzed by experts, who classified the items as their importance, complexity and time of implementation. The Fuzzy Inference System was utilized in order to reduce the subjectivity and interpretation bias of the evaluator, which generated closer results between two different applicators to the same object of study. As a secondary result, the participating companies of the applications were evaluated towards the implementation of the lean construction. It was noticed that the companies, for the most part, still do not apply lean construction concepts and tools, evidences were found only of the application practices that interfaced with other areas of management, such as quality and planning. Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES
- Published
- 2017
47. DIRETIVAS INFLUENCIADAS PELO SISTEMA TOYOTA DE PRODUÇÃO PARA CONCEPÇÃO DO PROJETO DE ARQUITETURA FABRIL
- Author
-
Taniguti, Zenilda Alexandria, Machado, Ricardo Luiz, Amaral, Tatiana Gondim do, and Álvares, Manoel da Silva
- Subjects
Sistema Toyota de Produção (TPS), Arquitetura industrial, Projeto de arquitetura ,ENGENHARIA DE PRODUCAO [ENGENHARIAS] ,Toyota Production System (TPS). Industrial Building. Architectural design - Abstract
Submitted by admin tede (tede@pucgoias.edu.br) on 2017-09-18T12:35:17Z No. of bitstreams: 1 Zenilda Alexandria Taniguti.pdf: 3106241 bytes, checksum: c8b3d06c0e021fe28207a0b199bd6c37 (MD5) Made available in DSpace on 2017-09-18T12:35:17Z (GMT). No. of bitstreams: 1 Zenilda Alexandria Taniguti.pdf: 3106241 bytes, checksum: c8b3d06c0e021fe28207a0b199bd6c37 (MD5) Previous issue date: 2017-06-08 This research aims to elaborate directives influenced by the principles of management of the Toyota Production System (TPS) for the design of the industrial architecture project. The purpose is to contribute with the elaboration of the factory architecture project using orientations based on the positive results of TPS. The methodological approach chosen for the development of this dissertation was the Design Science Research Methodology (DSRM), directed to technological research. The research explains that the production management is based on principles that need a correct organization of the space, study and methodologies in the design of the architecture projects of the factory buildings. In addition, the work considers the possibility of the designed physical space to contribute with solutions to the organizational demands and to facilitate the application of the productive system. The research is focused in the relations between the guiding principles of the TPS and the complexities of the factory projects. With the application of DSRM, at first a theoretical review on the factory building and the most relevant principles of the TPS is carried out. Then an analysis of the relationship of the two concepts from a conceptual map establishes the design and development of a proposed Toyota Architecture Directive (DAFT). In a third moment, this set of directives is submitted to the eyes of eight experts working in the area of architecture and industry, through semistructured interviews. This evaluation allows the refinement of the set of 14 directives (DAFT) for final presentation. In the discussion of the directives by the experts interviewed the opinions link the production management with the need to study the factory space as a whole, in an interactive way. At all times, it is evident that the complexity of projects and manufacturing facilities requires specific study methodologies to solve organizational problems. As a result of the research, we also obtained evidence that the directives from the TPS tools, for the most part, can be applied in several industrial projects, considering that some experts work with other systems and considered them relevant. In this way, the DAFT can represent to the organizational challenges a possible discussion proposal to assist in the decision making in all stages of the design of the industrial architecture project. Esta pesquisa tem como objetivo elaborar diretivas influenciadas pelos princípios de gestão do Sistema Toyota de Produção (TPS) para a concepção do projeto de arquitetura fabril. O propósito é contribuir na elaboração do projeto de arquitetura fabril com orientações baseadas nos resultados positivos do TPS. A abordagem metodológica escolhida para o desenvolvimento deste trabalho foi a Design Science Research Methodology (DSRM), direcionada para pesquisas tecnológicas. A pesquisa explicita que a gestão da produção é baseada em princípios que necessitam de uma correta organização do espaço, do estudo e de metodologias na concepção dos projetos de arquitetura dos edifícios fabris. Além disso, o trabalho considera a possibilidade do espaço físico projetado em contribuir com soluções para as demandas organizacionais e facilitar a aplicação do sistema produtivo. A pesquisa é subsidiada nas relações dos princípios norteadores do TPS e nas complexidades dos projetos fabris. Com a aplicação da DSRM, primeiro é realizada uma revisão teórica sobre o edifício fabril e os mais relevantes princípios do TPS. Em seguida, uma análise da relação dos dois conceitos a partir de um mapa conceitual estabelece o design e o desenvolvimento de uma proposta de Diretivas de Arquitetura fabril Toyota (DAFT). Em um terceiro momento, este conjunto de diretivas é submetido ao olhar de oito experts atuantes na área da arquitetura e industrial, por meio de entrevistas semiestruturadas. Esta avaliação, em um quarto momento, permite o refinamento do conjunto de 14 diretivas (DAFT) para apresentação final. Na discussão das diretivas pelos experts entrevistados, as opiniões fazem a ligação da gestão da produção com a necessidade do estudo do espaço fabril como um todo, de forma interativa. Em todos os momentos fica evidenciado que a complexidade dos projetos e das instalações fabris exige metodologias de estudo específicas para solucionar os problemas organizacionais. Como resultados da pesquisa também foram obtidas evidências de que as diretivas advindas das ferramentas do TPS, em sua maioria, podem ser aplicadas em projetos industriais diversos, considerando que alguns experts trabalham com outros sistemas e as consideraram pertinentes. Desta forma, as DAFT podem representar aos desafios organizacionais uma possível proposta de discussão para auxiliar na tomada de decisões em todas etapas da concepção do projeto de arquitetura fabril.
- Published
- 2017
48. Contribution to the study of durability and fluid´s transport in concretes containing mineral additions
- Author
-
Almeida, Marina Augusta Malagoni de, Cascudo, Oswaldo, Carasek, Helena, Amaral, Tatiana Gondim do, and Lopes, Anne Neiry de Mendonça
- Subjects
Nanossílica ,Mecanismos de transporte ,Metacaulim ,Sílica ativa ,Transport mechanisms ,Durabilidade ,Nanosilica ,Silica fume ,Durability ,Metakaolin ,ENGENHARIA CIVIL [ENGENHARIAS] - Abstract
A atual crise hídrica brasileira, gerada pelo baixo nível dos reservatórios, tem ameaçado a produção energética nacional. Frente a esse problema, as torres eólicas se apresentam como uma solução viável. Sabe-se que essas torres são construídas em regiões de alta agressividade e, portanto, faz-se necessário o desenvolvimento de concretos de alto desempenho que sejam capazes de resistir às ações ambientais às quais são submetidos de maneira que essas estruturas atinjam a vida útil de projeto previamente definida, garantindo a viabilidade das torres. Nesse sentido, o presente trabalho avalia as propriedades mecânicas e os mecanismos de transporte de massa (permeabilidade e absorção) que ocorrem no interior dos concretos que contêm adições minerais pozolânicas de alto desempenho, com o intuito de avaliar a influência da presença dessas adições nessas propriedades. Foram elaborados três diferentes proporcionamentos de estudo contendo respectivamente, 9% de sílica ativa em composição com 1% de nanossílica, 5% de um metacaulim de elevada finura em composição com 5% de um metacaulim um pouco menos fino, ambos de elevada pozolanicidade e um proporcionamento contendo exclusivamente 10% do metacaulim de maior finura, além de um proporcionamento de referência. São apresentadas análises em microscópio eletrônico de varredura (MEV) visando à caracterização da estrutura interna do material, reconstituição de traço com vistas à análise do teor de agregado/ligante nas regiões do cobrimento e do interior do concreto, análises relacionadas ao transporte de massa: absorção de água por imersão e por capilaridade e permeabilidade ao ar pelo método de Figg, além da caracterização mecânica. Os concretos com incorporação de adição pozolânica apresentaram melhorias significativas na resistência à compressão, no módulo de elasticidade, na permeabilidade ao ar e no refinamento dos poros. Além disso, a avaliação da microestrutura por meio de microscopia eletrônica de varredura mostrou que o uso das adições minerais pode ter causado densificação e melhoria na aderência da zona de transição entre os agregados e a pasta de cimento. O ensaio de reconstituição de traço mostrou que a região do cobrimento apresenta menor relação agregado/ligante, o que corrobora o resultado do ensaio de absorção capilar, em que se constatou que a região do cobrimento apresentou absorção capilar média inferior à região do interior. Assim, se concluiu que a incorporação das diferentes adições minerais estudadas no presente trabalho alterou significativamente as propriedades do concreto, com destaque positivo para as propriedades associadas à durabilidade, nas quais os benefícios do uso da adição mineral são mais pronunciados e, além disso, também se concluiu que a região do cobrimento se apresenta mais favorável à durabilidade que a região interna. Brazil's current water crisis, generated by the low level of reservoirs, has threatened the national energy production. Faced with this problem, the wind towers present themselves as a viable solution. It is known that these towers are constructed in regions of high aggressiveness and therefore, it is necessary to develop high performance concretes that are able to withstand environmental action to which they are submitted, so that these structures reach the lifespan previously defined in project, ensuring the viability of the towers. In this sense, the present study evaluates the mass transport mechanisms (permeability and absorption) that takes place inside the concrete containing mineral pozzolanic admixtures of high performance, in order to evaluate the influence of the presence of these additions in these properties. Three different study mixes were prepared containing, respectively, 9% of silica fume in composition with 1% of nanossílica, 5% of a metakaolin with high fineness in composition with 5% of a metakaolin slightly less fine, both with high pozzolanic activity, a mix containing only 10% of the metakaolin with higher fineness, and a reference proportioning. The analysis presented in this work involve the scanning electron microscope (SEM) to characterize the internal structure of the material, the trace reconstruction test to analyze the aggregate/binder ratio in the regions of the cover and the interior of concrete, and the analyzes related to the mass transport: water absorption by immersion and capillarity and the air permeability obtained by the Figg’s method, in addition to the mechanical characterization. The concrete with addition of pozzolanic admixtures showed significant improvements in compressive strength, in the modulus of elasticity, in the air permeability and in the refinement of pores. Furthermore, the evaluation of the microstructure by scanning electron microscope showed that the use of mineral admixtures may cause an improvement in the adhesion and in the densification of the transition zone between aggregate and cement paste. The trace reconstitution test showed that the concrete cover has lower ratio aggregate/binder, which corroborates the results of the capillary absorption test in which it was found that the cover of concrete presents a mean capillarity absorption lower than the interior region. Thus, it was concluded that the incorporation of the different mineral admixtures studied in this work significantly alter the properties of concrete, with positive emphasis on the properties related to the durability, in which the benefits of using mineral admixtures is more pronounced and, in addition, it was also concluded that the concrete cover presents itself more favorable to the durability than the interior region. Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES
- Published
- 2016
49. Technical development and evaluation od cost and benefit of the construction system of sandwich panels, with bottles PET nuccleus, framed in local
- Author
-
Fernandes, Georgeo Dias, Amaral, Tatiana Gondim do, Araújo, Daniel de Lima, Cascudo, Oswaldo, and Barros, Mercia Maria S. Bottura de
- Subjects
Lean construction ,Technical analysis ,Análise técnica ,Atributos de valor ,Sistema construtivo inovador ,Innovative building system ,Bottles of polyethylene terephthalate (PET) ,Construção enxuta ,Value attributes ,Garrafas de politereftalato de etileno (PET) ,CONSTRUCAO CIVIL [ENGENHARIA CIVIL] - Abstract
Os métodos construtivos tradicionais são questionados em função da baixa produtividade, desperdícios, retrabalhos e baixa padronização, dentre outros aspectos. Em virtude destes problemas e levando em conta aspectos ambientais, novos sistemas construtivos, que fazem uso de materiais reutilizáveis ou recicláveis de outras indústrias, são analisados visando verificar sua eficiência em nível técnico-econômico. Diante desse contexto, o objetivo da dissertação é descrever o desenvolvimento técnico e avaliar custo e benefício do sistema construtivo em painéis sanduíche, moldados no local, que reutiliza garrafas de politereftalato de etileno (PET) para compor o núcleo das paredes e lajes. Relativo ao desenvolvimento técnico, descrevem-se os experimentos e ensaios realizados para a conformação do sistema construtivo, apresentando a configuração das suas características e peculiaridades. Em seguida, discutem-se os resultados dos ensaios executados, compreendendo os iniciais para definição da segurança estrutural das paredes e lajes conjuntamente com a apresentação do modelo teórico de cálculo, bem como os de avaliação de desempenho para validação. No aspecto econômico, faz-se um comparativo entre o sistema construtivo tradicional e o sistema estudado. A relação custo direto foi examinada e observou-se os benefícios com a ajuda dos atributos de valor esperados para opções pré-fabricadas de construção, quais sejam: custo direto (material e mão de obra), tempo (cronograma), flexibilidade de projeto, tempo de administração de obra, qualidade, entregas e conferência em obra, atividades de subempreiteiros em obra, segurança do trabalho, ergometria, condições de saúde, impacto ambiental, certificação LEED, entulho e descarte, relações públicas, marketing e manutenção (ciclo de vida). Com a ajuda de engenheiros orçamentistas, por meio de entrevistas, investigaram-se as etapas, atividades, produtividade e recursos necessários para executar um projeto no sistema construtivo tradicional, sistema construtivo em alvenaria estrutural e no sistema construtivo analisado. Elaboraram-se planilhas de composição de custo e produtividade para as situações hipotéticas do sistema construtivo inovador e convencional de paredes de vedação com lajes de edifícios habitacionais e para paredes e lajes estruturais de obras até dois pavimentos. O mapeamento dos processos foi delineado, no qual foram extraídas as considerações sobre possíveis benefícios ou não do sistema construtivo. As descrições técnicas evidenciam a possibilidade da viabilidade construtiva de painéis sanduíche, com núcleo de garrafas PET, moldados no local. Já o a avaliação de custo e benefício demonstrou seu valor, nem tanto em função do custo direto, mas, em termos de benefícios de gestão do sistema construtivo. Traditional construction methods are questioned, because of low productivity, waste, rework, low standardization, among other things. Because of these problems and taking into account environmental aspects, new building systems that make use of reusable or recyclable materials from other industries are analyzed to verify its efficiency in technical and economic level. In this context, the aim of the dissertation is to describe the technical development and assess costs and benefits of the constructive system sandwich panels, molded on site, which reuses bottles of polyethylene terephthalate (PET) to make up the core of the walls and slabs. Concerning the technical development was described experiments and tests carried out for the conformation of the construction system, with the configuration of its characteristics and peculiarities, discussed the results of the tests performed, including the early to define the structural safety of the walls and slabs together with the presentation of the theoretical model calculation and performance evaluation for the validation. In the economic aspect, there was a comparison between the traditional construction system and the studied system. The cost direct was examined and observed the benefits with the help of value attributes expected to prefabricated options construction, drawn by Cook (2013), namely: direct costs (material and labor), time (schedule), design flexibility, work time management, quality, delivery and conference in work, subcontractors activities in work, work safety, exercise stress testing, health, environmental impact, LEED certification, rubble and dispensing, public relations, marketing, maintenance (life cycle). With the help of estimators engineers, through interviews, the steps we investigated, activities, productivity and resources needed to execute a project in the traditional building system, building system in masonry traditional system and building system analyzed. Was elaborated cost composition of spreadsheets and productivity for hypothetical situations of conventional and innovative construction system of sealing walls with slabs of residential buildings and walls and structural slabs works until two floors. The mapping process was designed, in which to extract the consideration of potential benefits or otherwise of the building system. Technical descriptions highlight the possibility of constructive feasibility of sandwich panels, with core of PET bottles, molded on site. And the evaluation of costs and benefits demonstrates its value, not so much due to the direct cost, but in terms of building system management benefits.
- Published
- 2016
50. Análise das condições ergonômicas de trabalho em atividades típicas na execução de revestimentos em superfícies verticais de edificações
- Author
-
Silva Netto, Ezequiel Pinto da, Catai, Rodrigo Eduardo, Romano, Cesar Augusto, and Amaral, Tatiana Gondim do
- Subjects
Higiene do trabalho ,Pottery ,Cerâmica ,ENGENHARIAS::ENGENHARIA CIVIL::CONSTRUCAO CIVIL [CNPQ] ,Human engineering ,Engenharia civil ,Construção civil - Mão-de-obra ,Civil engineering ,Building - Manpower ,Ergonomia ,Industrial hygiene - Abstract
A construção civil é um dos setores da economia que possui um dos maiores índices de afastamento de funcionários por acidentes do trabalho, e grande parte destes acidentes, em função, por exemplo, de traumas musculares advindos dos postos de trabalho e atividades mal projetados. Desta forma esta dissertação teve como objetivo principal realizar uma análise das condições ergonômicas de trabalho em atividades típicas na execução de revestimentos em superfícies verticais de edificações. A pesquisa foi classificada como estudo de caso de caráter exploratório com análises qualitativas e quantitativas. A análise ergonômica foi realizada com a aplicação dos métodos OWAS e RULA, por meio do questionário nórdico e diagrama de áreas dolorosas e com a avaliação do fator ambiental calor, para pedreiros de duas obras distintas na cidade de Paranaguá – PR. No ano de 2014 foram realizados as análises preliminares e levantamentos de dados do local, atividades e do pessoal, e em 2015 foram coletados dados relativos ao calor, com auxílio do medidor de stress térmico digital, assim como a aplicação dos métodos e compilação dos resultados. As atividades estudadas foram o emboço e a aplicação de cerâmica. Os resultados encontrados mostraram que a atividade de emboço foi a mais crítica para a saúde do trabalhador, segundo todas as ferramentas ergonômicas aplicadas. Quanto ao fator ambiental calor, o mesmo foi caracterizado como insalubre, por estar acima do limite de tolerância previsto, em três das quatro medições realizadas. Foi possível concluir ainda que a região lombar e o pescoço foram as mais afetadas nas tarefas estudadas e que a aplicação das ferramentas ergonômicas em conjunto traz mais precisão aos resultados, por serem complementares. Para melhoria nos ambientes de trabalho sugere-se a utilização de métodos de exaustão ou ventilação, a implantação de bancadas com altura regulável nas tarefas ou ações de capturar a argamassa em masseira, assim como a realização de rodízios de tarefas, ou ainda a realização de correções posturais, ginástica laboral e estudos macroergonômicos. The construction industry is one of the sectors of the economy that has one of the highest clearance rates of employees for work-related injuries, and most of these accidents, due, for example, muscle trauma of the jobs and poorly designed activities. Thus this dissertation aimed to undertake an analysis of ergonomic working conditions in typical activities in the execution of coatings on vertical surfaces of buildings. The research was classified as a study of exploratory case with qualitative and quantitative analyzes. The ergonomic analysis was performed with the application of OWAS and RULA methods, through the Nordic questionnaire and diagram of painful areas and the assessment of the environmental factor heat for Bricklayers two distinct works in the city of Paranaguá - PR. In the year 2014 it was carried out preliminary analysis and site survey data, activities and staff, and in 2015 were collected related to heat data with the aid of digital thermal stress meter, as well as the application of methods and compilation of results . The activities studied were the plaster and application of ceramics. The results showed that the plaster activity was the most critical to the health of workers, according to all ergonomic tools applied. As for the environmental factor heat, it was characterized as unhealthy, to be above the tolerance in three of the four measurements. It was also possible to conclude that the lower back and neck were the most affected in the studied tasks and that the application of ergonomic tools together brings more precision to the results, because they are complementary. To improve the work environment suggests the use of exhaust methods or ventilation, the implementation of the stands with adjustable height in the tasks or actions to capture the mortar trough, as well as performing tasks casters, or performing postural corrections, gymnastics and macroergonômicos studies.
- Published
- 2015
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.