Search

Carious exposure of an irreversibly inflamed vital pulp in a young permanent tooth presents a significant clinical challenge to clinicians to maintain the vitality. Direct pulp capping, partial pulpotomy, and complete pulpotomy are the available procedures to treat young permanent tooth. Mineral trioxide aggregate and biodentine are currently the material of choice for these procedures. The present case report describes the successful apexogenesis of mandibular left first permanent molar using mineral trioxide aggregate. The 18-month follow-up of the case demonstrated clinical and radiographic success with absence of any signs and symptoms and continued root formation.

In this study, copper oxide (CuO) specimens were successfully prepared by the hydrothermal process at altered calcination temperatures; 350, 450, and 550°C. The synthesized samples were analyzed through X-ray powder diffraction (XRD), scanning electron microscope (SEM), Raman, Fourier-transform infrared spectroscopy (FTIR), and UV-Vis spectroscopy to analyze the impact of calcination temperature on the structural, morphological, vibration spectra, functional group, and optical properties of CuO for optoelectronic device applications. XRD confirms the pure single-phase monoclinic structure of synthesized samples with no impurity phases and has good crystallinity with the development in calcination temperature. The average crystalline size, lattice constant, and porosity were found in the range of 3.98–5.06 nm; a = 3.4357 Å, b = 3.9902 Å, c = 4.8977 Å – a = 3.0573 Å, b = 3.9573 Å, c = 4.6892 Å; and 3.37–1.03%, respectively. SEM exhibited a variation in morphology by increasing calcination temperature. Raman spectra revealed that the CuO sample calcinated at 550°C with a stone-like shape having a large grain size of 3.25 μm exhibited that Raman peak intensity and the multiphonon band became stronger and sharper and exhibited higher intensity compared to the samples calcinated at 350 and 450°C. FTIR spectra confirmed that these synthesized specimens exhibited the peaks associated with the typical stretching vibrations of the Cu–O bond between 400 and 500 cm−1 exhibiting the formation of CuO. The energy bandgap was slightly reduced from 1.61 to 1.43 eV with the increase in the calcination temperature. The optical studies revealed that the calcination temperature of 550°C improves the optical properties of CuO by tuning its optical bandgap. The modified structural, morphological, and optical characteristics of the prepared CuO samples make them an appropriate candidate for optoelectronic device applications.

A unique method was used to synthesize extremely stable silver stearate nanoparticles (AgStNPs) incorporated in an organic-based monolith. The facile strategy was then used to selectively isolate hemeproteins, myoglobin (Myo) and hemoglobin (Hb). Ethyl alcohol, silver nitrate, and stearic acid were, respectively, utilized as reducing agents, silver precursors, and capping agents. The color changed to cloudy from transparent, indicating that AgStNPs had been formed. AgStNP nanostructures were then distinctly integrated into the natural polymeric scaffold. To characterize the AgStNP–methacrylate polymeric monolith and the silver nanoparticles, energy-dispersive X-ray (EDX), scanning electron microscopy (SEM), and Fourier-transform infrared (FT-IR) spectroscopy were used. The results of the SEM analysis indicated that the AgStNP–methacrylate polymeric monolith’s texture was so rough in comparison with that of the methacrylate polymeric monolith, indicating that the extraction process of the monolith materials would be more efficient because of the extended surface area of the absorbent. The comparison between the FT-IR spectra of AgStNPs, the bare organic monolith, and AgStNP–methacrylate polymeric monolith confirms that the AgStNPs were immobilized on the surface of the organic monolith. The EDX profile of the built materials indicated an advanced peak of the Ag sequence which represented an Ag atom of 3.27%. The results therefore established that the AgStNPs had been successfully integrated into the monolithic materials. Extraction efficiencies of 92% and 97% were used to, respectively, recover preconcentrated Myo and Hb. An uncomplicated method is a unique approach of both fabrication and utilization of the nanosorbent to selectively isolate hemeproteins. The process can further be implemented by using other noble metals.

Polymer monoliths modified by using nanoparticles (NPs) integrate high NP specific surface area with different monolith surface chemistry and high porosity. As a result, they have extensive applications within different fields, whereas nanomaterial-functionalised porous polymer monoliths have elicited considerable interest from investigators. This study is aimed at fabricating organic polymer-based monoliths from polybutyl methacrylate-co-ethylenedimethacrylate (BuMA-co-EDMA) monoliths prior to immobilization of gold or silver metal on the pore surface of the monoliths using reducing reagent (extracts of lemon peels). This was intended to denote a sustainable technique of immobilizing nanoparticles that are advantageous over physical and chemical techniques because it is safe in terms of handling, readily available, environmentally friendly, and cheap. Two different methods were used in the study to effectively immobilize nanoparticles on monolithic components. The outcomes showed that soaking the monolith rod in the prepared nano solution directly and placing it within ovens at temperatures of 80°C constituted the most effective method. Characterisation of the fabricated monolith was undertaken using SEM/EDX analysis, UV-vis. spectra analysis, and visual observation. The SEM analysis showed that nanoparticles were extensively immobilised on the surface polymers. Another peak was attained through EDX analysis, thus confirming the Au atom existence at 2.83% alongside another peak that proved the Ag atom existence at 1.92%. The fabricated components were used as sorbents for purifying protein. The ideal performance was achieved using gold nanoparticles (GNPs) immobilised organic monolith that attained a greater pepsin extraction recovery compared to silver nanoparticles (SNPs) immobilised organic monoliths alongside bare organic-based monolith.

In the present work, sol-gel-synthesized titanium oxide nanoparticles (Ti[O.sub.2] NPs) were added to polyvinyl chloride (PVC) and polymethyl methacrylate (PMMA) to create polymer nanocomposites (PNCs) samples. The preparation was carried out via the solution casting method. The synthesized Ti[O.sub.2] NPs have a tetragonal anatase phase and an average grain size of 15.7 nm. XRD analysis reveals that the Ti[O.sub.2] NPs' addition to PVC/PMMA causes a decrease in the crystallinity of PNCs films. Infrared Fourier analysis demonstrated the interplay/complexity between the PVC/PMMA blend and Ti[O.sub.2] NPs. The UV/visible spectrum of the PVC/PMMA blend showed two absorbance peaks at 278 and 208 nm, which may result from the n [right arrow] [[pi].sup.*] and [pi] [right arrow] [[pi].sup.*] transitions. Also, optical bandgaps for indirect and direct allowed transitions decreased with increasing Ti[O.sub.2] NPs concentration. The samples' AC electrical conductivity and dielectric properties were measured at room temperature. As the Ti[O.sub.2] NPs content in the nanocomposite rises, a percolating network begins to emerge inside the composite, demonstrating that AC electrical conductivity obeys Jonscher's law. Additionally, it has been demonstrated that nanoparticle concentration leads to a higher composite dielectric loss and dielectric constant. These findings suggest the possibility of using the prepared nanocomposites in capacitive energy storage and optoelectronic devices. Highlights * PVC/PMMA-Ti[O.sub.2] nanocomposites' films were fabricated via the solution casting method. * Adding Ti[O.sub.2] NPs to PVC/PMMA reduces the crystallinity of the PNCs films. * The allowed direct and indirect bandgaps decreased with rising Ti[O.sub.2] NPs content. * AC conductivity, impedance, and dielectric characteristics were discussed. * The findings indicate the use of prepared samples in optoelectronic devices. KEYWORDS dielectric functions, optoelectronic devices, PMMA, PVC, Ti[O.sub.2] NPs, 1 | INTRODUCTION Nanomaterials are a crucial part of the industrial revolution and have the potential to be employed in the manufacture of technologically advanced, highly efficient, affordable, and energy-efficient [...]