205 results on '"Almajid, Abdulhakim A."'
Search Results
2. Development of 3D printing short carbon fiber reinforced polypropylene composite filaments
3. Microstructural Evaluation of Inductively Sintered Aluminum Matrix Nanocomposites Reinforced with Silicon Carbide and/or Graphene Nanoplatelets for Tribological Applications
4. Corrosion of Newly Manufactured Nanocrystalline Al and Two of its Alloys in stagnant 4.0% NaCl Solutions
5. Effects of TiO2 powder morphology on the mechanical response of pure magnesium: 1D nanofibers versus 0D nanoparticulates
6. Distinct influence for carbon nano-morphology on the activity and optimum metal loading of Ni/C composite used for ethanol oxidation
7. Effective polysulfone-amorphous SiO2 NPs electrospun nanofiber membrane for high flux oil/water separation
8. High-efficiency dye-sensitized solar cells based on nitrogen and graphene oxide co-incorporated TiO2 nanofibers photoelectrode
9. High performance of NiCo nanoparticles-doped carbon nanofibers as counter electrode for dye-sensitized solar cells
10. TiO2 nanorod-intercalated reduced graphene oxide as high performance electrode material for membrane capacitive deionization
11. Characterization and correlation of mechanical, microstructural and ultrasonic properties of power plant steel
12. Ultrasonic characterization of heat-treatment effects on SAE-1040 and -4340 steels
13. Electrochemical Corrosion Behavior of API X-70 5L Grade Steel in 4.0 wt. % Sodium Chloride Solutions after Different Immersion Periods of Time
14. Effective and reusable oil/water separation membranes based on modified polysulfone electrospun nanofiber mats
15. Development of high performance Mg–TiO2 nanocomposites targeting for biomedical/structural applications
16. Effect of the Matrix Melt Flow Index and Fillers on Mechanical Properties of Polypropylene-Based Composites
17. Investigation of yttria-doped alumina nanocomposites reinforced by multi-walled carbon nanotubes
18. The Effect of Alloying, Processing and Heat Treatment on the Wear Resistance of Al-Cu-Mg-Ag Alloys.
19. MACROSCOPIC PROPERTIES OF NOVEL CORROSION RESISTANT AND TAMPER EVIDENT VISCOELASTIC POLYMERS, BASED ON HYBRID CYCLIC PHOSPHAZENE MATERIALS
20. Electrochemical Studies on the Corrosion Behavior of API X65 Pipeline Steel in Chloride Solutions
21. Direct Fabrication of Yttrium Aluminium Garnet Nanofibers by Electrospinning
22. Corrosion Passivation in Natural Seawater of Aluminum Alloy 1050 Processed by Equal-Channel-Angular-Press
23. Effect of high-frequency induction heat sintering conditions on the microstructure and mechanical properties of nanostructured magnesium/hydroxyapatite nanocomposites
24. Corrosion Passivation in Simulated Body Fluid of Magnesium/Hydroxyapatite Nanocomposites Sintered by High Frequency Induction Heating
25. Corrosion of Magnesium/Manganese Alloy in Chloride Solutions and its Inhibition by 5-(3-Aminophenyl)-tetrazole
26. High temperature deformation of solution treated 7010 Al-alloy
27. Effect of deformation path change on plastic response and texture evolution for 1050 Al pre-deformed by ECAP and subsequently plane strain compressed
28. Manufacturing Aspects of Advanced Polymer Composites for Automotive Applications
29. Ultrasonic Non-Destructive Characterization of Power Plant Steel
30. Surface Damage Characteristics and Specific Wear Rates of a New Continuous Carbon Fiber (CF) / Polyetheretherketone (PEEK) Composite under Sliding and Rolling Contact Conditions
31. Surface protection of copper in aerated 3.5% sodium chloride solutions by 3-amino-5-mercapto-1,2,4-triazole as a copper corrosion inhibitor
32. Effect of combining plane-strain compression with equal channel angular pressing on mechanical properties and texture development in an Al alloy
33. Hot deformation of AA6082-T4 aluminum alloy
34. High-Temperature Deformation and Ductility of a Modified 5083 Al Alloy
35. The Multiple Uses of Polypropylene/Polyethylene Terephthalate Microfibrillar Composite Structures to Support Waste Management—Composite Processing and Properties
36. High-Temperature Deformation of Naturally Aged 7010 Aluminum Alloy
37. Modeling analysis of the tensile strength of polypropylene base Short Carbon Fiber reinforced composites
38. Development of Polypropylene/Polyethylene Terephthalate Microfibrillar Composites Filament to Support Waste Management
39. Experimental and numerical studies of dielectric properties of BaTi[O.sub.3]-platinum composites at microwave frequencies
40. Mechanical and Physical Properties of Short Carbon Fiber and Nanofiller-Reinforced Polypropylene Hybrid Nanocomposites
41. Ductile to Brittle Transition of Short Carbon Fiber-Reinforced Polypropylene Composites
42. Mechanical, Physical, and Wear Properties of 3D Printed Polyactic Acid Materials
43. Design of bimorph piezo-composite actuators with functionally graded microstructure
44. Design and fabrication of functionally graded PZT/Pt piezoelectric bimorph actuator
45. Analysis of out-of-plane displacement and stress field in a piezocomposite plate with functionally graded microstructure
46. The effect compatibilizer on mechanical properties of short carbon fiber reinforced polypropylene composites
47. Mechanical, microstructure and texture characterization of API X65 steel
48. Microstructural and Mechanical Characterization of Artificially-Aged Power Plant Steel
49. Interfacial Reaction between Sn-Ag-Cu-Mg Solder and ENIG Substrate
50. Reinforcing Low-Volume Fraction Nano-TiN Particulates to Monolithical, Pure Mg for Enhanced Tensile and Compressive Response
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.