Search

Molecularly imprinted polymers (MIPs) are artificial receptors equipped with selective recognition sites for target molecules. One of the most promising strategies for protein MIPs relies on the exploitation of short surface-exposed protein fragments, termed epitopes, as templates to imprint binding sites in a polymer scaffold for a desired protein. However, the lack of high-resolution structural data of flexible surface-exposed regions challenges the selection of suitable epitopes. Here, we addressed this drawback by developing a polyscopoletin-based MIP that recognizes recombinant proteins via imprinting of the widely used Strep-tag II affinity peptide (Strep-MIP). Electrochemistry, surface-sensitive IR spectroscopy, and molecular dynamics simulations were employed to ensure an utmost control of the Strep-MIP electrosynthesis. The functionality of this novel platform was verified with two Strep-tagged enzymes: an O 2 -tolerant [NiFe]-hydrogenase, and an alkaline phosphatase. The enzymes preserved their biocatalytic activities after multiple utilization confirming the efficiency of Strep-MIP as a general biocompatible platform to confine recombinant proteins for exploitation in biotechnology., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Abnormal alkaline phosphatase (ALP) levels have been linked to breast cancer, prostate cancer, bone damage, gingivitis and abnormal liver function. Monitoring ALP levels is important for better diagnosis and treatment of these diseases. Detection of ALP by colorimetric methods is very portable in terms of signal reading, but still suffers from low sensitivity. SERS can achieve high sensitivity detection, but cannot be separated from large precision instruments. Therefore, researchers have worked to optimize various aspects of the sensor, such as sensitivity, detection time, and operating procedures, to enable portable and rapid ALP detection. Isothermal amplification using simple system components meets the current demand for rapid, portable assays. We have developed a novel one-pot high-efficiency ALP assay strategy called IHP-GT. IHP-GT performs a one-step cascade amplification using only one probe (IGHP) as a template. The phosphorylated primer P binds to IGHP, forming a P/IGHP structure. At this point, the G-quadruplex closes and no signal is generated. In the presence of ALP, primer P is dephosphorylated to remove the restriction and then amplified in a cascade using IGHP as a template to release the full G-quadruplex structure. The single-stranded G-quadruplex will bend to form a secondary structure, facilitating secondary amplification starting with primer AT to produce PrG and P'. The PrG structure will trigger triple amplification, enabling cascade amplification. The G-quadruplex structure produced by cascade amplification has the dual role of promoting amplification of primer AT and binding to ThT to produce a fluorescent signal. The IHP-GT method provides a highly sensitive detection of ALP in less than 90 min and has been successfully used to analyze ALP in human serum samples. In addition, IHP-GT can be used to screen for ALP inhibitors. Importantly, we lyophilized the IHP-GT reaction components into powder form for user-friendly poc testing., Competing Interests: Declaration of competing interest The authors declare that they have no competing interests., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The study of Metal-Organic Frameworks (MOFs) has gained significant momentum due to their remarkable properties, including adjustable pore sizes, extensive surface area, and customizable compositions, which have urged scientists to investigate their applicability in pertinent societal issues such as water absorption, environmental remediation, and sensor technology. MOFs have the ability to transport and detect specific biomolecules, including proteins. One such biomolecule is alkaline phosphatase (ALP) that can be influenced by various diseases and can lead to severe consequences when its regulation is disrupted. The porous nature of MOFs and their tunable nature allows them to selectively adsorb, interact directly or indirectly with ALP. This ultimately influences the electronic and optical properties of the MOF, leading to measurable changes. Early detection and continuous monitoring of ALP play a crucial role in the use of an effective treatment, and recent studies have shown that MOFs are effective in detecting alkaline phosphatases. This manuscript offers a thorough examination of the potential biomedical applications of MOFs for monitoring alkaline phosphatase and envisions possible future trends in this field.

Nanoceria have demonstrated a wide array of catalytic activity similar to natural enzymes, holding considerable significance in the colorimetric detection of alkaline phosphatase (ALP), which is a biomarker of various biological disorders. However, the issues of physiological stability and formation of protein corona, which are strongly related to their surface chemistry, limit their practical application. In this work, CeO 2 nanoparticles characterized by enhanced dimensional uniformity and specific surface area were synthesized, followed by encapsulation with various polymers to further increase catalytic activity and physiological stability. Notably, the CeO 2 nanoparticles encapsulated within each polymer exhibited improved catalytic characteristics, with PAA-capped CeO 2 exhibiting the highest performance. We further demonstrated that the PAA-CeO 2 obtained with enhanced catalytic activity was attributed to an increase in surface negative charge. PAA-CeO 2 enabled the quantitative assessment of AA activity within a wide concentration range of 10 to 60 μM, with a detection limit of 0.111 μM. Similarly, it allowed for the evaluation of alkaline phosphatase activity throughout a broad range of 10 to 80 U/L, with a detection limit of 0.12 U/L. These detection limits provided adequate sensitivity for the practical detection of ALP in human serum., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

The primary characteristics of a clinical assay are its accuracy and speed. For alkaline phosphatase (ALP) monitoring in medical treatment, a rapid, reliable surface-enhanced Raman scattering (SERS) detection technique was designed based on the controlled "hot spot" effect caused by the mediation of silver ions (Ag + ). Consisting of functionalized Au nanoparticles (NPs), Ag + , and the enzyme substrate 2-phospho-L-ascorbic acid triso-dium salt (AAP), the fabricated detection technique can achieve a reliable clinical assay for ALP detection in human serum within several minutes. Herein, due to the coordination interaction of Ag + and the cyano group (-CN), Ag + can coordinate with p -mercaptobenzonitrile (MBN) modified on the surface of Au NPs, leading to the connection of adjacent Au NPs in a controllable manner to form a chain structure, in which the SERS signal of MBN at 2228 cm -1 in the Raman silent region would be highly amplified. Under the enzymatic biocatalysis of ALP, AAP was converted into ascorbic acid (AA). AA triggered the reduction of Ag + into Ag 0 , resulting in a decrease in the concentration of Ag + . Meanwhile, the decrease in the SERS intensity of MBN was well-controlled and was recognized with the increased amounts of ALP. Based on this, the SERS detection technique for ALP was established. The limit of detection (LOD) for the detection of ALP was as low as 1.23 pg mL -1 (0.005 U L -1 ). Because of all these characteristics and its ultrahigh stability, this SERS detection technique is an important point-of-care candidate for the reliable, efficacious, and highly sensitive detection of ALP.

A metal-organic-framework (MOF) fluorescent sensor is reported based on NH 2 -MIL-101(Fe) propelled pesticide and alkaline phosphatase (ALP) catalytic reaction. Different from previous reports, a cascade reaction system combined with MOF structural changes to generate fluorescence was employed. The rationale is that ALP can hydrolyze L-ascorbic acid 2-phosphate (AAP) into L-ascorbic acid (AA), which can reduce Fe 3+ to decompose structurally NH 2 -MIL-101(Fe), resulting in 2-aminoterephthalic acid (NH 2 -BDC) with intense fluorescence. The  fluorescence can be decreased to different degrees due to inhibition of organophosphate pesticides (OPPs) on the activity of ALP. By taking chlorpyrifos (CPY) as the model compound of an OPP pesticide and adding ALP and CPY into the NH 2 -MIL-101(Fe) framework, the resulting cascade reaction fluorescence sensors exhibit a good sensitivity for CPY and ALP sensing. The working ranges are  0.02-2 μg/L and 0.2-20 mU/mL with detection limits (LOD) of 5.31 ng/L and 0.05 mU/mL, respectively. The proposed sensor has been actually applied to satisfactory detection of CPY and ALP in food and serum samples. This fluorescence-based assay may extend the application of MOF-based biosensors., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Protein immobilization using water-soluble ionic metal-organic polyhedra (MOPs) acting as porous spacers has recently been demonstrated as a potent strategy for the preparation of biocatalysts. In this article, we describe a mixed-protein approach to achieve biocomposites with adjustable enzyme contents and excellent immobilization efficiencies, in a systematic and well-controlled manner. Self-assembly of either cationic or anionic MOPs with bovine serum albumin or egg white lysozyme combined with enzymes (alkaline phosphatase, laccase or cytochrome c) led to solid-state catalysts with a high retention of enzyme activity. Furthermore, for all these systems, the dilution of enzymes within the solid-state composite led to noticeably improved catalytic performances, with both higher specific activity and affinity for substrate.

Background: Temperature sensing is commonly used in point-of-care (POC) detection technologies, yet the portability and convenience of use are frequently compromised by the complexity of thermosensitive processes and signal transduction. Especially, multi-step target recognition reactions and temperature measurement in the reaction vessel present challenges in terms of stability and integration of detection devices. To further combine photothermal reaction and signal readout in one assay, these two processes enable to be integrated into miniaturized microfluidic chips, thereby facilitating photothermal sensing and achieving a simple visual temperature sensing as POC detection., Results: A copper ion (Cu 2+ )-catalyzed photothermal sensing system integrated onto a microfluidic distance-based analytical device (μDAD), enabling the visual, portable, and sensitive quantitative detection of multiple targets, including ascorbic acid, glutathione, and alkaline phosphatase (ALP). The polydopamine nanoparticles (PDA NPs) were synthesized by the regulation of free Cu 2+ through redox or coordination reactions, facilitating the transduction of distinct photothermal response signals and providing the versatile Cu 2+ -responsive sensing systems. Promoted by integration with a photothermal μDAD, the system combines PDA's photothermal responsiveness and thermosensitive gas production of ammonium bicarbonate for improved sensitivity of ALP detection, reaching the detection limit of 9.1 mU/L. The system has successfully achieved on-chip detection of ALP with superior anti-interference capability and recoveries ranging from 96.8 % to 104.7 %, alongside relative standard deviations below 8.0 %., Significance and Novelty: The μDAD design accommodated both the photothermal reaction of PDA NPs and thermosensitive gas production reaction, achieving the rapid sensing of visual distance signals. The μDAD-based Cu 2+ -catalyzed photothermal sensing system holds substantial potential for applications in biochemical analysis and clinical diagnostics, underscored by the versatile Cu 2+ regulation mechanism for a broad spectrum of biomarkers., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Coacervates represent models for membrane-free protocells and thus provide a simple route to synthetic cellular-like systems that provide selective encapsulation of solutes. Here, we demonstrate a simple and versatile post-coacervation crosslink method using the thiol-ene click reaction in aqueous media to prepare covalently crosslinked coacervates. The crosslinking of the coacervate enables stability at extreme pH where the uncrosslinked coacervate fully disassembles. The crosslinking also enhances the hydrophobicity within the coacervate environment to increase the encapsulation efficiency of bovine serum albumin (BSA), as compared to the uncrosslinked coacervate. Additionally, the crosslinked coacervate increases the stabilization of BSA at low pH. These crosslinked coacervates can act as carriers for enzymes. The enzymatic activity of alkaline phosphatase (ALP) is enhanced within the crosslinked coacervate compared to the ALP in aqueous solution. The post-coacervation crosslink approach allows the utilization of coacervates for encapsulation of biologicals under conditions where the coacervate would generally disassemble. We demonstrate that these crosslinked coacervates enable the protection of encapsulated protein against denaturation at extreme pH and enhance the enzymatic activity with encapsulation. This click approach to stabilization of coacervates should be broadly applicable to other systems for a variety of biologics and environmentally sensitive molecules.

In this work, a novel and sensitive fluorescence sensing system for alkaline phosphatase (ALP) was constructed using a bifunctional copper metal-organic framework (Cu@MOF) nanozyme, which had excellent oxidase-mimetic activity and fluorescence properties. Owing to the presence of 2-amino-1,4-benzenedicarboxylic acid (1,4-BDC-NH 2 ) ligand, Cu@MOF displays excellent fluorescence performance at 444 nm. Additionally, Cu 2+ endows the oxidase-like activity of Cu@MOF, which could trigger p-phenylenediamine (PPD) to be oxidized to a brown product (PPDox) and quench the photoluminescence of Cu@MOF through the inner filtration effect (IFE). As the preferential affinity of ATP for Cu 2+ , the catalytic activity of Cu@MOF was significantly reduced once ATP was added, thus PPD could not be oxidized and fluorescence was recovered. In the presence of ALP, ATP was hydrolyzed to adenosine and Pi, which allowed Cu@MOF to regain its catalytic activity and continued to catalyze the generation of PPDox. The fluorescence of Cu@MOF was therefore weakened once again. The ALP activity was directly proportional to the degree of decrease in fluorescence intensity. Thus, this novel fluorescence sensing strategy had a linear range of 0.5-60 U/L and the limit of detection was 0.14 U/L. The established sensing method could also be used to for ALP inhibitors screening, and achieved satisfactory results in determining the level of ALP activity in human serum., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The residues of organophosphorus pesticides (OPs) are increasing environmental pollution and public health concerns. Thus, the development of simple, convenient and sensitive method for detection of OPs is crucial. Herein, a multifunctional Fe-based MOF with fluorescence, catalytic and adsorption, is synthesized by a simple one-pot hydrothermal method. The ratiometric fluorescence sensor for detection of OPs is constructed by using only one multifunctional sensing material. The NH 2 -MIL-101(Fe) is able catalyze the o-phenylenediamine (OPD) into 2,3-diaminophenazine (DAP) in the presence of H 2 O 2 . The generated DAP can significantly quench the intrinsic fluorescence of NH 2 -MIL-101(Fe) by the fluorescence resonance energy transfer (FRET) and internal filtration effect (IFE), while producing a new measurable fluorescence. Without immobilization or molecular imprinting, pyrophosphate ion (PPi) can inhibit the peroxidase-like activity of the NH 2 -MIL-101(Fe) by chelating with Fe 3+ /Fe 2+ redox couple. Moreover, PPi can also be hydrolyzed by alkaline phosphatase (ALP), the presence of OPs inhibits the activity of ALP, resulting in the increase of extra PPi preservation and signal changes of ratiometric fluorescence, the interactions of ALP with different OPs are explored by molecular docking, the OPs (e.g., glyphosate) interact with crucial amino acid residues (Asp, Ser, Ala, Lys and Arg) are indicated. The proposed sensor exhibits excellent detection performance for OPs with the detection limit of 18.7 nM, which provides a promising strategy for detection of OPs., Competing Interests: Declaration of competing interest The authors have no conflict of potential competing interest, financial or otherwise., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Bacterial enzymes with different subcellular localizations play a critical ecological role in biogeochemical processing. However, precisely quantifying enzymes localized at certain subcellular levels, such as extracellular enzymes, has not yet been fully realized due to the complexity and dynamism of the bacterial outer membrane. Here we present a magneto-controlled potentiometric sensing platform for the specific detection of extracellular enzymatic activity. Alkaline phosphatase (ALP), which is one of the crucial hydrolytic enzymes in the ocean, was selected as the target enzyme. Magnetic beads functionalized with an ALP-responsive self-assembled peptide (GGGGGFFFpYpYEEE, MBs-peptides) prevent negatively charged peptides from entering the bacterial outer membrane, thereby enabling direct potentiometric sensing of extracellular ALP both attached to the bacterial cell surface and released into the surrounding environment. The dephosphorylation-triggered assembly of peptide-coupled magnetic beads can be directly and sensitively measured by using a magneto-controlled sensor. In this study, extracellular ALP activity of Pseudomonas aeruginosa at concentrations ranging from 10 to 1.0 × 10 5 CFU mL -1 was specifically and sensitively monitored. Moreover, this magneto-controlled potentiometric method enabled a simple and accurate assay of ALP activity across different subcellular localizations.

The emergence of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and the subsequent pandemic have led to devastating public health and economic losses. The development of highly sensitive, rapid and inexpensive methods to detect and monitor coronaviruses is essential for family diagnosis, preventing infections, choosing treatments and programs and laying the technical groundwork for viral diagnosis. This study established one-step immunoassays for rapid and sensitive detection of SARS-CoV-2 by using a single-chain variable fragment (scFv) fused to alkaline phosphatase (AP) or NanoLuc (NLuc) luciferase. First, a high-affinity scFv antibody specific to the SARS-CoV-2 nucleocapsid (N) protein was screened from hybridoma cells-derived and phage-displayed library. Next, prokaryotic expression of the scFv-AP and scFv-NLuc fusion proteins were induced, leading to excellent antibody binding properties and enzyme catalytic activities. The scFv-AP fusion had a detection limit of 3 pmol per assay and was used to produce eye-readable biosensor readouts. Moreover, the scFv-NLuc protein was applied in a highly sensitive luminescence immunoassay, achieving a detection limit lower than 0.1 pmol per assay. Therefore, the scFv-AP and scFv-NLuc fusion proteins can be applied for the rapid and simple diagnosis of SARS-CoV-2 to safeguard human health and provide guidance for the detection of other pathogenic viruses., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Self-assembly, a powerful strategy for constructing highly stable and well-ordered supramolecular structures, widely exists in nature and in living systems. Peptides are frequently used as building blocks in the self-assembly process due to their advantageous characteristics, such as ease of synthesis, tunable mechanical stability, good biosafety, and biodegradability. Among the initiators for peptide self-assembly, enzymes are excellent candidates for guiding this process under mild reaction conditions. As a crucial and commonly used biomarker, alkaline phosphatase (ALP) cleaves phosphate groups, triggering a hydrophilicity-to-hydrophobicity transformation that induces peptide self-assembly. In recent years, ALP-instructed peptide self-assembly has made breakthroughs in biological imaging and therapy, inspiring the development of self-assembly biomaterials for diagnosis and therapeutics. In this review, we highlight the most recent advancements in ALP-instructed peptide assemblies and provide perspectives on their potential impact. Finally, we briefly discuss the ongoing challenges for future research in this field.

Investigating organic carriers' utilization efficiency and bioactivity within organic-inorganic hybrid nanoflowers is critical to constructing sensitive immunosensors. Nevertheless, the sensitivity of immunosensors is interactively regulated by different classes of biomolecules such as antibodies and enzymes. In this work, we introduced a new alkaline phosphatase-antibody-CaHPO 4 hybrid nanoflowers (AAHNFs) microreactor based colorimetric immunoprobe. This system integrates a biometric unit (antibody) with a signal amplification element (enzyme) through the biomineralization process. Specifically, the critical factors affecting antibody recognition activity in the formation mechanism of AAHNFs are investigated. The designed AAHNFs retain antibody recognition ability with enhanced protection for encapsulated proteins against high temperature, organic solvents, and long-term storage, facilitating the selective construction of lock structures against antigens. Additionally, a colorimetric immunosensor based on AAHNFs was developed. After ascorbic acid 2-phosphate hydrolysis by alkaline phosphatase (ALP), the generated ascorbic acid decomposes I 2 to I - , inducing the localized surface plasmon resonance in the silver nanoplate, which is effectively tuned through shape conversion to develop the sensor. Further, a 3D-printed portable device is fabricated, integrated with a smartphone sensing platform, and applied to the data of collection and analysis. Notably, the immunosensor exhibits improved analytical performance with a 0.1-6.25 ng·mL -1 detection range and a 0.06 ng·mL -1 detection limit for quantitative saxitoxin (STX) analysis. The average recoveries of STX in real samples ranged from 85.9% to 105.9%. This study presents a more in-depth investigation of the recognition element performance, providing insights for improved antibody performance in practical applications.

Along with an ever-deepening understanding of the catalytic principle of natural enzymes, the rational design of high-activity biomimetic nanozymes has become a hot topic in current research. Inspired by the active centers of natural enzymes consisting of catalytic sites and binding pockets, a Cu-doped CoS 2 hollow nanocube (Cu/CoS 2 HNCs) nanozyme integrating substitution defects and vacancies is developed through a defect engineering strategy. It is shown that the vacancies and substitution defects in the developed Cu/CoS 2 HNC nanozymes serve as binding pockets and catalytic sites, respectively. The construction of this key active center and the accelerated electron transfer from the Co/Cu redox cycle significantly improve the substrate affinity and catalytic efficiency of the Cu/CoS 2 HNCs nanozymes, which results in the excellent catalytic performance of the Cu/CoS 2 HNC nanozymes. Using the superior enzymatic activity of Cu/CoS 2 HNCs, a fluorescence detection platform for alkaline phosphatase (ALP) is established, which is a wider detection range and lower limit of detection (LOD) than previous work. This work broadens the family of nanozymes and provide a new idea for the development of novel nanozymes with high enzyme activity, as well as a guideline for the construction of highly sensitive fluorescent sensors., (© 2024 Wiley‐VCH GmbH.)

The development of enzyme activity analysis methods is critical for precise and rapid assessments of enzyme activity levels within biological systems, facilitating a more profound comprehension of physiological functions and disease mechanisms. Alkaline phosphatase (ALP) participates in various physiological processes involving phosphate ester hydrolysis. Altered ALP activity levels are often indicative of different diseases, underscoring the necessity for accurate ALP activity determination in medical diagnostics. This study innovatively applies turbidity as a physical variable, proposing a turbidimetric sensor based on an enhanced ammonium molybdate reagent for phosphate analysis. By integrating this with the ALP substrate p-nitrophenyl phosphate, a turbidimetric sensor was devised and employed for ALP activity analysis. The proposed turbidimetric sensor demonstrated high sensitivity both for phosphate (0.18 μmol/L) and ALP activity (0.03 mU/mL) assay. In practical applications, this turbidimetric sensor has been effectively employed to detect ALP activity in mouse feces, showcasing its potential for auxiliary diagnosis of inflammatory bowel disease. Significantly, this novel turbidity-based approach offers not only swift and straightforward procedures but also remarkable portability and cost-efficiency. Requiring solely a handheld turbidimeter and eliminating the need for bulky instruments, this approach holds significant potential for point-of-care testing applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Accurate, multiplex, and ultrasensitive measurement of different colocalized protein markers on individual tumor-derived extracellular vesicles (EVs) and dimerized proteins with multiple epitopes could provide insights into cancer heterogeneity, therapy management and early diagnostics that cannot be extracted from bulk methods. However, current digital protein assays lack certain features to enable robust colocalization, including multi-color detection capability, large dynamic range, and selectivity against background proteins. Here, we report a lithography-free, inexpensive (< $0.1) and ultrasensitive dual-color Membrane Digital ELISA (Mem-dELISA) platform by using track-etched polycarbonate (PCTE) membranes to overcome these shortcomings. Their through-pores remove air bubbles through wicking before they are sealed on one side by adhesion to form microwells. Immunomagnetic bead-analyte complexes and substrate solution are then loaded into the microwells from the opposite side, with >80% loading efficiency, before sealing with oil. This enables duplex digital protein colorimetric assay with beta galactosidase and alkaline phosphatase enzymes. The platform achieves 5 logs of dynamic range with a limit of detection of 10 aM for both Biotinylated β-galactosidase (B-βG) and Biotin Alkaline Phosphatase Conjugated (B-ALP) proteins. We demonstrate its potential by showing that a higher dosage of paclitaxel suppresses EpCAM-positive EVs but not GPC-1 positive EVs from breast cancer cells, a decline in chemo-resistance that cannot be detected with Western blot analysis of cell lysate. The Mem-dELISA is poised to empower researchers to conduct ultrasensitive, high throughput protein colocalization studies for disease diagnostics, treatment monitoring and biomarker discovery., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Himani Sharma, Vivek Yadav, Satyajyoti Senapati and Hsueh-Chia Chang has patent #Application No 63/516,620 pending to University of Notre Dame du Lac. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Photocurrent-polarity conversion strategies are typically realized by constructing complex photovoltaic electrodes or changing the relevant conditions, but most involve poor photogenerated carrier transfer efficiency and cumbersome experimental steps. To this end, a photoelectrochemical (PEC) biosensor by utilizing ascorbic acid (AA)-induced photocurrent-polarity-switching was proposed for the detection of carcinoembryonic antigen (CEA). Under light excitation, the electron donor AA was oxidized by the photogenerated holes of photoactive material Co-NC/CdS, resulting in the conversion of cathodic photocurrent to the anodic direction. In the presence of the target CEA, alkaline phosphatase (ALP) was introduced into the microplates by the sandwiched immunoreaction, which then catalyzed the production of AA from ascorbic acid-2-phosphate (AAP). Finally, the catalytic product AA was transferred onto Co-NC/CdS-modified screen-printed carbon electrode, thus activating photocurrent-polarity-switching platform. The anodic photocurrent values gradually increased with increasing CEA concentration in the range of 0.02-80 ng mL -1 and reached a limit of detection (LOD) of 8.47 pg mL -1 (S/N = 3). In addition, the results of actual sample detection prove the reliability of the constructed PEC biosensor. Importantly, this work relies on a mobile smartphone wireless Bluetooth device coupled with the PEC biosensor for immediate detection, providing another idea for detecting CEA in clinical diagnosis., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Foodborne hazardous factors pose a significant risk to public health, emphasizing the need for the development of sensitive and user-friendly detection strategies to effectively manage and control these risks in the food supply chain. Pyrococcus furiosus argonaute (PfAgo)-based biosensing approaches have been extensively explored due to its built-in signal amplification. However, the property that PfAgo is a DNA-guided DNA endonuclease has enabled almost all the existing PfAgo-based reports to be used for the detection of nucleic acids. To lend PfAgo toolbox to extended non-nucleic acid detection, we systematically investigated the mechanism characteristic of PfAgo' preference for guide DNA (gDNA) and proposed a gDNA dephosphorylation-modulated PfAgo sensor for the detection of non-nucleic acid targets. Our results indicated that PfAgo exhibits preference for 5'-phosphorylated gDNA at a specific ratio of PfAgo to gDNA concentration. Leveraging this PfAgo' preference and the dephosphorylation activity of alkaline phosphatase (ALP), ALP could be detected as low as 2.7 U/L. Furthermore, the PfAgo was coupled with immunolabelled ALP to develop a PfAgo-based fluorescence immunosensor, which achieves aflatoxins B 1 detection with a detection limit of 29.89 pg/mL and exhibits satisfactory recoveries in wheat and maize samples. The developed method broadens the application scope of PfAgo toolbox, and provides a simple, sensitive, and universal detection platform for a variety targets., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The synthesis of graphene quantum dots-like enriched with specific oxygenated groups (o-GQDs) exhibiting great catalytic performance offers a promising tool for diagnosis and biomedicine, but introducing specific oxygen groups remains a challenge. Here, we propose a mild synthetic protocol for producing regulated fluorescence emission (from blue to yellow) carbonyl functionalized GQDs with double catalytic function through Fe 3 O 4 -catalyzed hydroxyl radical (·OH) oxidation the precursors like graphene oxide, polyaniline (PANI) and polydopamine (PDA). The method can be carried out at room temperature than the traditional high-temperature oxidation in concentrated acid. Interestingly, o-GQDs exhibit excellent peroxidase (POD)- and ascorbate oxidase-like activity. XPS characterization showed a significant increase in carbonyl content in o-GQDs compared to the precursor, even a 14-fold increase in blue-emitting iron-doped GQDs (b-Fe-GQDs). The introduction of Fe 3 O 4 during the synthesis process results in a minor degree of Fe doping, which enhances the catalytic activity of b-Fe-GQDs through coordination with N. Based on this feature, highly sensitive single-signal and ultra-selective dual-signal methods for alkaline phosphatase detection were developed. This low cost and safe synthesis strategy paves the way for practical usage of o-GQDs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The rapid epidemic around the world of coronavirus disease 2019 (COVID-19), caused by the SARS-CoV-2 virus, proves the need and stimulates efforts to explore efficient diagnostic tests for the sensitive detection of the SARS-CoV-2 virus. An aggregation-induced electrochemiluminescence (AIECL) sensor was developed for the ultrasensitive detection of the SARS-CoV-2 nucleocapsid (N) protein in this work. Tetraphenylethylene doped in zeolite imidazole backbone-90 (TPE-ZIF-90) showed highly efficient aggregation-induced emission (AIE) to endow TPE-ZIF-90 with high ECL intensity. Upon the capture of the SARS-CoV-2 N protein by immune recognition, an alkaline phosphatase (ALP)-modified gold nanoparticle (AuNP)-decorated zinc oxide (ZnO) nanoflower (ALP/Au-ZnO) composite was introduced on the sensing platform, which catalyzed L-ascorbate-2-phosphate trisodium salt (AA2P) to produce PO 4 3- and ascorbic acid (AA). Based on a multiquenching of the ECL signal strategy, including resonance energy transfer (RET) between TPE-ZIF-90 and Au-ZnO, disassembly of TPE-ZIF-90 triggered by the strong coordination between PO 4 3- and Zn 2+ , and RET between TPE-ZIF-90 and AuNPs produced in situ by the AA reductive reaction, the constructed AIECL sensor achieved highly sensitive detection of the SARS-CoV-2 N protein with a low limit of detection of 0.52 fg/mL. With the merits of high specificity, good stability, and proven application ability, the present RET- and enzyme-triggered multiquenching AIECL sensor may become a powerful tool in the field of SARS-CoV-2 virus diagnosis.

The field of organic photoelectrochemical transistor (OPECT) is newly emerged, with increasing efforts attempting to utilize its properties in biological sensing. Advanced materials with new physicochemical properties have proven important to this end. Herein, we report a metal-organic polymers-gated OPECT biosensing exemplified by Cu Ⅰ -arylacetylide polymers (CuAs)-modulated poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) channel. Both the photoelectrochemical properties and gating capability of CuAs are explored and optimized for high-efficacy photogating. Morever, based on its inherent structure, the specific reaction between CuAs and sulfur ions (S 2- ) is revealed and S 2- -mediated microRNA-21 detection is realized by linking with nucleic acid amplification and alkaline phosphatase catalytic chemistry. This work introduces metal-organic polymers as gating materials for OPECT biosensing., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Bovine intestinal alkaline phosphatase (biALP), a membrane-bound plasma metalloenzyme, maintains intestinal homeostasis, regulates duodenal surface pH, and protects against infections caused by pathogenic bacteria. The N-glycans of biALP regulate its enzymatic activity, protein folding, and thermostability, but their structures are not fully reported. In this study, the structures and quantities of the N-glycans of biALP were analyzed by liquid chromatography-electrospray ionization-high energy collision dissociation-tandem mass spectrometry. In total, 48 N-glycans were identified and quantified, comprising high-mannose [6 N-glycans, 33.1 % (sum of relative quantities of each N-glycan)], hybrid (6, 11.9 %), and complex (36, 55.0 %) structures [bi- (13, 26.1 %), tri- (16, 21.5 %), and tetra-antennary (7, 7.4 %)]. These included bisecting N-acetylglucosamine (33, 56.6 %), mono-to tri-fucosylation (32, 53.3 %), mono-to tri-α-galactosylation (16, 20.7 %), and mono-to tetra-β-galactosylation (36, 58.5 %). No sialylation was identified. N-glycans with non-bisecting GlcNAc (9, 10.3 %), non-fucosylation (10, 13.6 %), non-α-galactosylation (26, 46.2 %), and non-β-galactosylation (6, 8.4 %) were also identified. The activity (100 %) of biALP was reduced to 37.3 ± 0.2 % (by de-fucosylation), 32.7 ± 2.9 % (by de-α-galactosylation), and 0.2 ± 0.2 % (by de-β-galactosylation), comparable to inhibition by 10 -4 to 10 1  mM EDTA, a biALP inhibitor. These results indicate that fucosylated and galactosylated N-glycans, especially β-galactosylation, affected the activity of biALP. This study is the first to identify 48 diverse N-glycan structures and quantities of bovine as well as human intestinal ALP and to demonstrate the importance of the role of fucosylation and galactosylation for maintaining the activity of biALP., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

The combination of closed bipolar electrodes (cBPE) with electrochemiluminescence (ECL) imaging has demonstrated remarkable capabilities in the field of bioanalysis. Here, we established a cBPE-ECL platform for ultrasensitive detection of alkaline phosphatase (ALP) and two-dimensional imaging of epidermal growth factor receptor (EGFR). This cBPE-ECL system consists of a high-density gold nanowire array in anodic aluminum oxide (AAO) membrane as the cBPE coupled with ECL of highly luminescent cadmium selenide quantum dots (CdSe QDs) luminophores to achieve cathodic electro-optical conversion. When an enzyme-catalyzed amplification effect of ALP with 4-aminophenyl phosphate monosodium salt hydrate (p-APP) as the substrate and 4-aminophenol (p-AP) as the electroactive probe is introduced, a significant improvement of sensing sensitivity with a detection limit as low as 0.5 fM for ALP on the cBPE-ECL platform can be obtained. In addition, the cBPE-ECL sensing system can also be used to detect cancer cells with an impressive detection limit of 50 cells/mL by labeling ALP onto the EGFR protein on A431 human epidermal cancer cell membranes. Thus, two-dimensional (2D) imaging of the EGFR proteins on the cell surface can be achieved, demonstrating that the established cBPE-ECL sensing system is of high resolution for spatiotemporal cell imaging.

New strategies for the simultaneous and portable detection of multiple enzyme activities are highly desirable for clinical diagnosis and home care. However, the methods developed thus far generally suffer from high costs, cumbersome procedures, and heavy reliance on large-scale instruments. To satisfy the actual requirements of rapid, accurate, and on-site detection of multiple enzyme activities, we report herein a smartphone-assisted programmable microfluidic paper-based analytical device (μPAD) that utilizes colorimetric and photothermal signals for simultaneous, accurate, and visual quantitative detection of alkaline phosphatase (ALP) and butyrylcholinesterase (BChE). Specifically, the operation of this μPAD sensing platform is based on two sequential steps. Cobalt-doped mesoporous cerium oxide (Co-m-CeO 2 ) with remarkable peroxidase-like activities under neutral conditions first catalytically decomposes H 2 O 2 for effectively converting colorless 3,3',5,5'-tetramethylbenzidine (TMB) into blue oxidized TMB (oxTMB). The subsequent addition of ALP or BChE to their respective substrates produces a reducing substance that can somewhat inhibit the oxTMB transformation for compromised colorimetric and photothermal signals of oxTMB. Notably, these two-step bioenzyme-nanozyme cascade reactions strongly support the straightforward and excellent processability of this platform, which exhibit lower detection limits for ALP and BChE with a detection limit for BChE an order of magnitude lower than those of the other reported paper-based detection methods. The practicability and efficiency of this platform are further demonstrated through the analysis of clinical serum samples. This innovative platform exhibits great potential as a facile yet robust approach for simultaneous, accurate, and on-site visual detection of multiple enzyme activities in authentic samples.

We have developed an automated sensing system for the repeated detection of a specific microRNA (miRNA) of the influenza A (H1N1) virus. In this work, magnetic particles functionalized with DNAs, target miRNAs, and alkaline phosphate (ALP) enzymes formed sandwich structures. These particles were trapped on nickel (Ni) patterns of our sensor chip by an external magnetic field. Then, additional electrical signals from electrochemical markers generated by ALP enzymes were measured using the sensor, enabling the highly sensitive detection of target miRNA. The magnetic particles used on the sensor were easily removed by applying the opposite direction of external magnetic fields, which allowed us to repeat sensing measurements. As a proof of concept, we demonstrated the detection of miRNA-1254, one of the biomarkers for the H1N1 virus, with a high sensitivity down to 1 aM in real time. Moreover, our sensor could selectively detect the target from other miRNA samples. Importantly, our sensor chip showed reliable electrical signals even after six repeated miRNA sensing measurements. Furthermore, we achieved technical advances to utilize our sensor platform as part of an automated sensing system. In this regard, our reusable sensing platform could be utilized for versatile applications in the field of miRNA detection and basic research.

Inspired by the crucial role of matrix vesicles (MVs), a series of biomimetic vesicles (BVs) fabricated by calcium glycerophosphate (CaGP) modified polyurethane were designed to mediate the mineralization through in situ enzyme activation for bone therapy. In this study, alkaline phosphatase (ALP) was harbored in the porous BVs by adsorption (Ad-BVs) or entrapment (En-BVs). High encapsulation of ALP on En-BVs was effectively self-activating by calcium ions of CaGP-modified PU that specifically hydrolyzed the organophosphorus (CaGP) to inorganic phosphate, thus promoting the formation of the highly oriented bone-like apatite in vitro . Enzyme-catalyzed kinetics confirms the regulation of apatite crystallization by the synergistic action of self-activated ALP and the confined microcompartments of BVs. This leads to a supersaturated microenvironment, with the En-BVs group exhibiting inorganic phosphate (Pi) levels 4.19 times higher and Ca 2+ levels 3.67 times higher than those of simulated body fluid (SBF). Of note, the En-BVs group exhibited excellent osteo-inducing differentiation of BMSCs in vitro and the highest maturity with reduced bone loss in rat femoral defect in vivo . This innovative strategy of biomimetic vesicles is expected to provide valuable insights into the enzyme-activated field of bone therapy.

A Pyrococcus furiosus Argonaute (PfAgo)-based biosensor is presented for alkaline phosphatase (ALP) activity detection in which the ALP-catalyzed hydrolysis of 3'-phosphate-modified functional DNA activates the strand displacement amplification, and the amplicon mediates the fluorescent reporter cleavage as a guide sequence of PfAgo. Under the dual amplification mode of PfAgo-catalyzed multiple-turnover cleavage activity and pre-amplification technology, the developed method was successfully applied to ALP activity determination with a detection limit (LOD) of 0.0013 U L -1 (3σ) and a detection range of 0.0025 to 1 U L -1 within 90 min. The PfAgo-based method exhibits satisfactory analytic performance in the presence of potential interferents and in complex human serum samples. The proposed method shows several advantages, such as rapid analysis, high sensitivity, low-cost, and easy operation, and has great potential in disease evolution fundamental studies and clinical diagnosis applications., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Familial Hypophosphatasia presents a complex diagnostic challenge due to its wide-ranging clinical manifestations and genetic heterogeneity. This study aims to elucidate the molecular underpinnings of familial Hypophosphatasia within a Tunisian family harboring a rare c.896 T > C mutation in the ALPL gene, offering insights into genotype-phenotype correlations and potential therapeutic avenues. The study employs a comprehensive approach, integrating biochemical examination, genetic analysis, structural modeling, and functional insights to unravel the impact of this rare mutation. Genetic investigation revealed the presence of the p.Leu299Pro mutation within the ALPL gene in affected family members. This mutation is strategically positioned in proximity to both the catalytic site and the metal-binding domain, suggesting potential functional consequences. Homology modeling techniques were employed to predict the 3D structure of TNSALP, providing insights into the structural context of the mutation. Our findings suggest that the mutation may induce conformational changes in the vicinity of the catalytic site and metal-binding domain, potentially affecting substrate recognition and catalytic efficiency. Molecular dynamics simulations were instrumental in elucidating the dynamic behavior of the tissue-nonspecific alkaline phosphatase isozyme (TNSALP) in the presence of the p.Leu299Pro mutation. The simulations indicated alterations in structural flexibility near the mutation site, with potential ramifications for the enzyme's overall stability and function. These dynamic changes may influence the catalytic efficiency of TNSALP, shedding light on the molecular underpinnings of the observed clinical manifestations within the Tunisian family. The clinical presentation of affected individuals highlighted significant phenotypic heterogeneity, underscoring the complex genotype-phenotype correlations in familial Hypophosphatasia. Variability in age of onset, severity of symptoms, and radiographic features was observed, emphasizing the need for a nuanced understanding of the clinical spectrum associated with the p.Leu299Pro mutation. This study advances our understanding of familial Hypophosphatasia by delineating the molecular consequences of the p.Leu299Pro mutation in the ALPL gene. By integrating genetic, structural, and clinical analyses, we provide insights into disease pathogenesis and lay the groundwork for personalized therapeutic strategies tailored to specific genetic profiles. Our findings underscore the importance of comprehensive genetic and clinical evaluation in guiding precision medicine approaches for familial Hypophosphatasia., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The control over secondary structure has been widely studied to regulate the properties of polypeptide materials, which is used to change their functions in situ for various biomedical applications. Herein, we designed and constructed enzyme-responsive polypeptides as gating materials for mesoporous silica nanoparticles (MSNs), which underwent a distorted structure-to-helix transition to promote the release of encapsulated drugs. The polypeptide conjugated on the MSN surface adopted a negatively charged, distorted, flexible conformation, covering the pores of MSN to prevent drug leakage. Upon triggering by alkaline phosphatase (ALP) overproduced by tumor cells, the polypeptide transformed into positively charged, α-helical, rigid conformation with potent membrane-penetrating capabilities, which protruded from the MSN surface to uncover the pores. Such a transition thus enabled cancer-selective drug release and cellular internalization to efficiently kill tumor cells. This study highlights the important role of chain flexibility in modulating the biological function of polypeptides and provides a new application paradigm for synthetic polypeptides with secondary-structure transition.

The development of an ultrasensitive and precise measurement of a breast cancer biomarker (cancer antigen 15-3; CA15-3) in complex human serum is essential for the early diagnosis of cancer in groups of healthy populations and the treatment of patients. However, currently available testing technologies suffer from insufficient sensitivity toward CA15-3, which severely limits early large-scale screening of breast cancer patients. We report a versatile electrochemical immunoassay method based on atomically cobalt-dispersed nitrogen-doped carbon (Co-NC)-modified disposable screen-printed carbon electrode (SPCE) with alkaline phosphatase (ALP) and its metabolite, ascorbic acid 2-phosphate (AAP), as the electrochemical labeling and redox signaling unit for sensitive detection of low-abundance CA15-3. During electrochemical detection by differential pulse voltammetry (DPV), it was found that the Co-NC-SPCE electrode did not have a current signal response to the AAP substrate; however, it had an extremely favorable response current to ascorbic acid (AA). Based on the above principle, the target CA15-3-triggered immunoassay enriched ALP-catalyzed AAP produces a large amount of AA, resulting in a significant change in the system current signal, thereby realizing the highly sensitive detection of CA15-3. Under the optimal AAP substrate concentration and ALP catalysis time, the Co-NC-SPCE-based electrochemical immunoassay demonstrated a good DPV current for CA15-3 in the assay interval of 1.0 mU/mL to 10,000 mU/mL, with a calculated limit of detection of 0.38 mU/mL. Since Co-NC-SPCE has an excellent DPV current response to AA and employs split-type scheme, the constructed electrochemical immunoassay has the merits of high preciseness and anti-interference, and its clinical diagnostic results are comparable to those of commercial kits., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

The construction of gating system in artificial channels is a cutting-edge research direction in understanding biological process and application sensing. Here, by mimicking the gating system, we report a device that easily synthesized single-glass micropipettes functionalized by three-dimensional (3D) DNA network, which triggers the gating mechanism for the detection of biomolecules. Based on this strategy, the gating mechanism shows that single-glass micropipette assembled 3D DNA network is in the "OFF" state, and after collapsing in the presence of ATP, they are in the "ON" state, at which point they exhibit asymmetric response times. In the "ON" process of the gating mechanism, the ascorbic acid phosphate (AAP) can be encapsulated by a 3D DNA network and released in the presence of adenosine triphosphate (ATP), which initiates a catalyzed cascade reaction under the influence of alkaline phosphatase (ALP). Ultimately, the detection of ALP can be responded to form the fluorescence signal generated by terephthalic acid that has captured hydroxyl radicals, which has a detection range of 0-250 mU/mL and a limit of detection of 50 mU/mL. This work provides a brand-new way and application direction for research of gating mechanism., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Alkaline phosphatase (ALP) is a class of hydrolase that catalyzes the dephosphorylation of phosphorylated species in biological tissues, playing an important role in many physiological and pathological processes. Sensitive imaging of ALP activity in living cells is contributory to the research on these processes. Herein, we propose an acid-responsive DNA hydrogel to deliver a cascaded enzymatic nucleic acid amplification system into cells for the sensitive imaging of intracellular ALP activity. The DNA hydrogel is formed by two kinds of Y-shaped DNA monomers and acid-responsive cytosine-rich linkers. The amplification system contained Bst DNA polymerase (Bst DP), Nt.BbvCI endonuclease, a Recognition Probe (RP, containing a DNAzyme sequence, a Nt.BbvCI recognition sequence, and a phosphate group at the 3'-end), and a Signal Probe (SP, containing a cleavage site for DNAzyme, Cy3 and BHQ2 at the two ends). The amplification system was trapped into the DNA hydrogel and taken up by cells, and the cytosine-rich linkers folded into a quadruplex i-motif in the acidic lysosomes, leading to the collapse of the hydrogel and releasing the amplification system. The phosphate groups on RPs were recognized and removed by the target ALP, triggering a polymerization-nicking cycle to produce large numbers of DNAzyme sequences, which then cleaved multiple SPs, restoring Cy3 fluorescence to indicate the ALP activity. This strategy achieved sensitive imaging of ALP in living HeLa, MCF-7, and NCM460 cells, and realized the sensitive detection of ALP in vitro with a detection limit of 2.0 × 10 -5 U mL -1 , providing a potential tool for the research of ALP-related physiological and pathological processes.

An ultra-sensitive photoelectrochemical (PEC) sensor based on perovskite composite was developed for the determination of alkaline phosphatase (ALP) in human serum. In contrast to CsPbBr 3 or Y6 that generated anodic current, the heterojunction of CsPbBr 3 /Y6 promoted photocarriers to separate and generated cathodic photocurrent. Ascorbic acid (AA) was produced by ALP hydrolyzing L-ascorbic acid 2-phosphate trisodium salt (AAP), which can combine with the holes on the photoelectrode surface, accelerating the transmission of photogenerated carriers, leading to enhanced photocurrent intensity. Thus, the enhancement of PEC current was linked to ALP activity. The PEC sensor exhibits good sensitivity for detection of ALP owing to the unique photoelectric properties of the CsPbBr 3 /Y6 heterojunction. The detection limit of the sensor was 0.012 U·L -1 with a linear dynamic range of 0.02-2000 U·L -1 . Therefore, this PEC sensing platform shows great potential for the development of different PEC sensors., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Deoxynivalenol (DON) is a mycotoxin that widely distributes in various foods and seriously threatens food safety. To minimize the consumers' dietary exposure to DON, there is an urgent demand for developing rapid and sensitive detection methods for DON in food. In this study, a bifunctional single-chain variable fragment (scFv) linked alkaline phosphatase (ALP) fusion protein was developed for rapid and sensitive detection of deoxynivalenol (DON). The scFv gene was chemically synthesized and cloned into the expression vector pET25b containing the ALP gene by homologous recombination. The prokaryotic expression, purification, and activity analysis of fusion proteins (scFv-ALP and ALP-scFv) were well characterized and performed. The interactions between scFv and DON were investigated by computer-assisted simulation, which included hydrogen bonds, hydrophobic interactions, and van der Waals forces. The scFv-ALP which showed better bifunctional activity was selected for developing a direct competitive enzyme-linked immunosorbent assay (dc-ELISA) for DON in cereals. The dc-ELISA takes 90 min for one test and exhibits a half inhibitory concentration (IC 50 ) of 11.72 ng/mL, of which the IC 50 was 3.08-fold lower than that of the scFv-based dc-ELISA. The developed method showed high selectivity for DON, and good accuracy was obtained from the spike experiments. Furthermore, the detection results of actual cereal samples analyzed by the method correlated well with that determined by high-performance liquid chromatography (R 2 =0.97165). These results indicated that the scFv-ALP is a promising bifunctional probe for developing the one-step colorimetric immunoassay, providing a new strategy for rapid and sensitive detection of DON in cereals., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

Herein, a sensitive ratiometric and split-type fluorescent sensing platform has been constructed for DNA detection based on one signal precursor and two fluorescent signal indicators. In this assay, o-phenylenediamine (OPD) was selected as the signal precursor. On one hand, Cu 2+ can oxidize OPD to produce 2, 3-diaminophenazine (DAP), which with an emission peak at 555 nm. On the other hand, ascorbic acid (AA) could react with Cu 2+ to generate dehydroascorbic acid (DHAA), which could further react with OPD to form 3-(1, 2-dihydroxy ethyl)furo[3, 4-b]quinoxalin-1 (3H)-on (DFQ) with a strong emission peak at 420 nm. As a result, the formation of DAP was inhibited, and leading to the decrease of fluorescence intensity at 555 nm. Alkaline phosphatase (ALP) could catalyze the substrate l-ascorbic acid-2-phosphate (AA2P) to produce AA in situ. Inspired by the successful use of ALP as a biocatalytic marker in bioassay, a split-type ratiometric fluorescent assay has been designed for DNA detection by using H1N1 DNA as the target model. It was realized for ratiometric fluorescent determination of H1N1 in a linear ranging from 50 pM to 1.5 nM with a limit of detection of 10 pM. The novel strategy could reduce the mutual interferences between the biomolecular recognition system and the fluorescence signal conversion system, which improving the accuracy of detection and effectively reducing the background signal. Furthermore, the strategy provided a promising platform for biomarkers detection in the fields of ratiometric fluorescent biosensors and bioanalysis., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Alkaline phosphatase (ALP) is a major biomarker for clinical diagnosis, but detection methods of ALP are limited in sensitivity and selectivity. In this paper, a novel method for ALP determination is proposed. A photoelectrochemical (PEC) sensor was prepared by growing UiO-tetratopic tetrakis (4-carbox-yphenyl) porphyrin (TCPP) in situ between layered Ti 3 C 2 through a one-pot hydrothermal method. The obtained Schottky heterojunction photoelectric material Ti 3 C 2 @UiO-TCPP not only has a large light absorption range but also greatly improves the efficiency of photogenerated electron hole separation and thereby enhances sensitivity for PEC detection. The phosphate group on the phosphorylated polypeptide was utilized to form a Zr-O-P bond with the zirconium ion on UiO-66, and then photocurrent decreases due to the steric hindrance effect of phosphorylated polypeptides, that is, the hindrance of electron transfer between the photoelectric material and a solution. The specific interaction between ALP and phosphorylated polypeptides shears the bond between phosphate and zirconium ion on UiO-66 in the peptides then weakens the hindrance effect and increases the photocurrent, thus realizing ALP detection. The linear range of ALP is 0.03-10,000 U·L -1 , and the detection limit is 0.012 U·L -1 . The method is highly sensitive and selective, and has been applied in detection of ALP in serum samples., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Alkaline phosphatase (ALP) is a crucial biomarker for clinical diagnosis, which is closely related to the physiological homeostasis regulation process of human body. And the abnormal level of ALP is associated with numerous diseases, such as liver dysfunction, bone diseases, diabetes, and so on. In order to meet the demand of personalized healthcare, it is particularly important to develop a miniaturized point-of-care testing (POCT) device for ALP detection. Herein, a portable solid-phase colorimetric sensor based on enzyme-induced metallization signal amplification strategy was constructed for ALP detection. The AuNPs modified on the glass slides acted as crystal seeds, allowing Ag + in the solution to be reduced and deposited on the surface of AuNPs, which further formed the gold core and silver shell (Au@Ag) complex and generated visual signals. The visual signals were recorded by a smartphone and quantified using open-source ImageJ software. Under the optimal conditions, the proposed method exhibited a good linear relationship from 2.0 to 16.0 pM, and the detection limit was as low as 0.9 pM. In addition, it was further successfully applied for ALP detection in non-transparent and complex samples (milk, different types of cells). A sensitive, low cost, rapid and convenient solid-phase sensor was developed for ALP detection, which was expected to provide a promising strategy for POCT devices., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Background: Alkaline phosphatase (ALP) is widely found in various organs and tissues of the human body which could assist in the verification of the presence of various diseases through its content in the blood. In the past few years, many analytical methods for ALP activity assays have been explored. However, a simple and economical method with high sensitivity and specificity also remains great challenge. Therefore, the development of sensitive and efficient approach for ALP analysis is of great significance in biomedical studies., Results: Herein, we constructed a highly sensitive and label-free ratiometric fluorometric biosensing platform for the determination of ALP activity, which utilizing lysozyme(Ly)-functionalized 5-methyl-2-thiouracil(MTU)-modified gold nanoclusters (MTU-Ly@Au NC) and poly-dopamine (PDA) as signal indicators. Dopamine (DA) can self-polymerizes to form PDA under alkaline conditions that can further quenched the fluorescence of MTU-Ly@Au NC at 525 nm due to fluorescence resonance energy transfer (FRET) and absorption competition quenching (ACQ) effects. In this process, the PDA fluorescence intensity at 325 nm was nearly unchanged. After the addition of ALP, ascorbic acid (AA) which can alleviate the self-polymerization process of DA was generated from the substrate ascorbic acid 2-phosphate (AAP), thus changing ratiometric fluorescence intensity of I 525 /I 325 . Hence, by monitoring the fluorescence ratio (I 525 /I 325 ), a ratiometric fluorescence biosensing platform for ALP was established with the linear calibration in the range of 0.5-8 U L -1 and the limit of detection of 0.157 U L -1 ., Significance: This work not only synthesized a novel fluorescence probe with simple preparation and low cost for ALP which has excellent anti-interference properties and selectivity. Furthermore, this biosensing platform was successfully applied for the determination of ALP activity in human serum samples. This work provided a potential tool for biomedical diagnostics in the future., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Herein, an adenosine triphosphate (ATP)-induced enzyme-catalyzed cascade reaction system based on metal-organic framework/alkaline phosphatase (MOF/ALP) nanocomposites was designed to establish a surface-enhanced Raman spectroscopy (SERS) biosensor for use in rapid, sensitive ATP detection. Numerous ALP molecules were first encapsulated using ZIF-90 to temporarily deactivate the enzyme activity, similar to a lock. Au nanostars (AuNSs), as SERS-enhancing substrates, were combined with o -phenylenediamine (OPD) to form AuNSs@OPD, which could significantly improve the Raman signal of OPD. When the target ATP interacted with the MOF/ALP nanocomposites, ATP could act as a key to open the MOF structure, releasing ALP, which should further catalyze the conversion of OPD to oxOPD with the aid of ascorbic acid 2-phosphate. Therefore, with the increasing concentrations of ATP, more ALP was released to catalyze the conversion of OPD, resulting in the reduced intensity of the Raman peak at 1262 cm -1 , corresponding to the level of OPD. Based on this principle, the ATP-induced enzyme-catalyzed cascade reaction SERS biosensor enabled the ultrasensitive detection of ATP, with a low detection limit of 0.075 pM. Consequently, this study provides a novel strategy for use in the ultrasensitive, rapid detection of ATP, which displays considerable potential for application in the fields of biomedicine and disease diagnosis.

Background: Hypophosphatasia (HPP) is an inherited multisystem disorder predominantly affecting the mineralization of bones and teeth. HPP is caused by pathogenic variants in ALPL, which encodes tissue non-specific alkaline phosphatase (TNSALP). Variants of uncertain significance (VUS) cause diagnostic delay and uncertainty amongst patients and health care providers., Results: The ALPL gene variant database (https://alplmutationdatabase.jku.at/) is an open-access archive for interpretation of the clinical significance of variants reported in ALPL. The database contains coding and non-coding variants, including single nucleotide variants, insertions/deletions and structural variants affecting coding or non-coding sequences of ALPL. Each variant in the database is displayed with details explaining the corresponding pathogenicity, and all reported genotypes and phenotypes, including references. In 2021, the ALPL gene variant classification project was established to reclassify VUS and continuously assess and update genetic, phenotypic, and functional variant information in the database. For this purpose, the database provides a unique submission system for clinicians, geneticists, genetic counselors, and researchers to submit VUS within ALPL for classification. An international, multidisciplinary consortium of HPP experts has been established to reclassify the submitted VUS using a multi-step process adhering to the stringent ACMG/AMP variant classification guidelines. These steps include a clinical phenotype assessment, deep literature research including artificial intelligence technology, molecular genetic assessment, and in-vitro functional testing of variants in a co-transfection model to measure ALP residual activity., Conclusion: This classification project and the ALPL gene variant database will serve the global medical community, widen the genotypic and phenotypic HPP spectrum by reporting and characterizing new ALPL variants based on ACMG/AMP criteria and thus facilitate improved genetic counseling and medical decision-making for affected patients and families. The project may also serve as a gold standard framework for multidisciplinary collaboration for variant interpretation in other rare diseases., Competing Interests: Declaration of competing interest The authors declare that they have no competing interests., (Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.)

Diseases such as liver cancer, extrahepatic biliary obstruction and osteocarcinoma are closely associated with the abnormal level of alkaline phosphatase (ALP). Hence, it is essential to develop a convenient assay to detect ALP activity. Herein, a novel signal-on fluorescent biosensor on account of the fluorescence signal of the aggregation-induced emission (AIE) fluorochrome 2,2',2'',2'''-((ethene-1,1,2,2-tetrayltetrakis(benzene-4,1-diyl))tetrakis(oxy))tetraacetic acid (EBTAC) encapsulated zeolitic imidazolate framework-8 (ZIF-8@EBTAC) was designed to monitor ALP. Due to the aggregation-induced emission of EBTAC, the synthetic ZIF-8@EBTAC shows robust fluorescence. Once pyrophosphate (ppi) was added, its complexation with Zn 2+ in ZIF-8 triggered the collapse of the ZIF-8 framework, releasing encapsulated EBTAC molecules and restoring to free state, leading to the dramatical decrease in fluorescence. ALP could catalyze the hydrolysis of ppi to phosphate (pi), which is difficult to bind to Zn 2+ and has little effect on the fluorescence of ZIF-8@EBTAC. Therefore, with the assistance of the substrate ppi, the ultimate fluorescence of ZIF-8@EBTAC was positively related with ALP activity. The constructed biosensor was able to monitor the ALP activity well from 0.01 to 100 U L -1 , and a detection limit of 0.01 U L -1 was achieved. Based on the ability of EBTAC serving as a fluorescent probe with aggregation-induced luminescence properties, this proposed design can be applied to diverse targets and provide new ideas for the establishment of fluorescent biosensors.

In conventional immunoassays, a secondary antibody is used to amplify the signal generated by the binding of the primary antibody to the target analyte. Due to concerns regarding animal use and cost-inefficiency of secondary antibody productions, there is a significant demand for the development of recombinant secondary antibody mimics (rSAMs). Here, we developed rSAMs using a signal-generating enzyme, monomeric alkaline phosphatase (mALP), and antibody-binders, including monomeric streptavidin (mSA2) and mouse IgG1- or rabbit IgG-binding nanobodies (MG1Nb or RNb). The mALP-MG1Nb, mALP-RNb, and mALP-mSA2 were genetically constructed and produced in large quantities using bacterial overexpression systems, which reduced manufacturing costs and time without the use of animals. Each rSAM exhibited high and selective binding to its respective primary antibody, generating linear band signals corresponding to the amounts of target analytes in western blots. The rSAMs also successfully generated sigmoidal signal curves that increased as the sample concentration increased. Moreover, they generated stronger signals than conventional ALP-conjugated secondary antibodies and SA, particularly in the medium to high sample concentration range, in both indirect and sandwich-type indirect ELISAs at the same sample concentration. The rSAMs we developed here may provide new insights to develop novel immunoassay-based analytical and diagnostic tools., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Sebyung Kang reports financial support was provided by National Research Foundation of Korea. Sebyung Kang reports financial support was provided by Ulsan National Institute of Science and Technology., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Compared with single signal readout, dual-signal readout commendably corrects the impact of systematic or background error, achieving more accurate results for the diagnosis of many diseases. This work aimed to design and prepare dual-emissive fluorescent probes for the construction of ratiometric fluorescence biosensors to detect liver disease biomarkers. Sodium alginate (SA) with numerous potential sub-fluorophores and active sites and 4,4',4'',4'''-(porphine-5,10,15,20-tetrayl) tetrakis (benzoic acid) (TCPP) with macrocyclic conjugated structures were introduced to prepare the carbonized polymer dots (CPDs) with red/blue dual emission based on the cross-linking enhanced emission (CEE) effect and the luminescence of macrocyclic conjugated structures. The ratiometric fluorescence sensing systems were constructed by integrating the specific response of CPDs to Cu 2+ and the affinity difference of Cu 2+ to substrates or products of enzymes. The sensing systems, CPDs/Cu 2+ /PPi and CPDs/Cu 2+ /BTCh, were designed to detect liver disease biomarkers, alkaline phosphatase (ALP) and butyrylcholinesterase (BChE), respectively. The limit of detection for ALP and BChE was 0.35 U/L and 0.19 U/L, respectively. The proposed sensors were successfully applied to human serum samples from different health stages with satisfactory recoveries. These results demonstrate the successful design of a novel dual-emissive fluorescent probe and provide a feasible strategy for clinical detection., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The development of biosensors mediated by synergistic quenching effect is of great significance for rapid and accurate clinical diagnosis. Hence, we prepared a cyan-emitting fluorescent Si dots for alkaline phosphatase (ALP) detection through the synergistic quenching effect of inner filter effect (IFE) and photo-induced electron transfer (PET). Si dots were prepared by microwave-assisted method, which displayed high quantum yield (28.7%), as well as good physiochemical properties, such as photo-stability, pH stability, and chemical stability. As the hydrolysate of 4-nitrophenyl phosphate disodium salt hexahydrate catalyzed by ALP, both IFE and PET of 4-nitrophenyl to Si dots were used for the turn-off mode detection of ALP. The linear relationships were established between the change of fluorescence intensity and ALP concentration in the range of 0.05 U L -1 to 5.0 U L-1, and 5.0 U L -1 to 80.0 U L -1 , respectively. The detection limit was 0.01 U L -1 . The synergistic quenching effect caused the turn-off mode detection to be more sensitive, and it can also be used for the accurate detection of ALP in human serum, thereby showing great anti-interference ability in complex environments., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Non-covalent interactions have been extensively used to fabricate nanoscale architectures in supramolecular chemistry. However, the biomimetic self-assembly of diverse nanostructures in aqueous solution with reversibility induced by different important biomolecules remains a challenge. Here, we report the synthesis and aqueous self-assembly of two chiral cationic porphyrins substituted with different types of side chains (branched or linear). Helical H-aggregates are induced by pyrophosphate (PPi) as indicated by circular dichroism (CD) measurement, while J-aggregates are formed with adenosine triphosphate (ATP) for the two porphyrins. By modifying the peripheral side chains from linear to a branched structure, more pronounced H- or J-type aggregation was promoted through the interactions between cationic porphyrins and the biological phosphate ions. Moreover, the phosphate-induced self-assembly of the cationic porphyrins is reversible in the presence of the enzyme alkaline phosphatase (ALP) and repeated addition of phosphates.

The coordination chemistry between phosphorylated molecules and metal ions has been reported, while few studies focus on its sensing capability. Herein, we report a colorimetric sensing strategy through the coordination chemistry between ascorbic acid 2-phosphate (AAP) and copper ions. The phosphate group-containing AAP can coordinate with copper ions to induce a visible color change from blue to green in a rapid way, which can be easily read by the naked eye or a smartphone based on the blue-to-green (B/G) ratio. This coordination chemistry provides a facile and convenient strategy for designing colorimetric assays. Alkaline phosphatase can catalyze the hydrolysis of AAP to ascorbic acid (AA), thus modulating the AAP/AA transformation and the AAP-mediated coordination, offering a straightforward way for monitoring the enzymatic activity. This colorimetric sensing strategy shows good performances in stability, sensitivity, cost, and scale-up production, holding great promise as a point-of-care technique for diagnostic applications.

We designed a paper-based analytical device by integrating horseradish peroxidase (HRP)-encapsulated 3D DNA for visual detection of alkaline phosphatase (ALP). This device allows on-paper sample pre-treatment, target recognition and signal readout, enabling simple (without additional pre-treatment of blood samples) and rapid (within 23 min) determination of ALP in clinical samples.

Recent developments in single-molecule enzymology (SME) have allowed for the observation of subpopulations present in enzyme ensembles. Tissue-nonspecific alkaline phosphatase (TNSALP), a homodimeric monophosphate esterase central to bone metabolism, has become a model enzyme for SME studies. TNSALP contains two internal disulfide bonds that are critical for its effective dimerization; mutations in its disulfide bonding framework have been reported in patients with hypophosphatasia, a rare disease characterized by impaired bone and tooth mineralization. In this paper, we present the kinetics of these mutants and show that these disulfide bonds are not crucial for TNSALP enzymatic function. This surprising result reveals that the enzyme's active conformation does not rely on its disulfide bonds. We posit that the signs and symptoms seen in hypophosphatasia are likely not primarily due to impaired enzyme function, but rather decreased enzyme expression and trafficking.