Search

The quality of a companion robot’s reaction is important to make it acceptable to the users and to sustain interactions. Furthermore, the robot’s reaction can be used to train socially acceptable behaviors and to develop certain skills in both normally developing children and children with cognitive disabilities. In this study, we investigate the influence of reaction time in the emotional response of a robot when children display aggressive interactions toward it. Different interactions were considered, namely, pickup, shake, drop and throw. The robot produced responses as audible sounds, which were activated at three different reaction times, namely, 0.5 s, 1.0 s, and 1.5 s. The results for one of the tasks that involved shaking the robotic toys produced a significant difference between the timings tested. This could imply that producing a late response to an action (i.e. greater than 1.0 s) could negatively affect the children’s comprehension of the intended message. Furthermore, the response should be comprehensible to provide a clear message to the user. The results imply that the designers of companion robotic toys need to consider an appropriate timing and clear modality for their robots’ responses.Other Information Published in: International Journal of Social Robotics License: https://creativecommons.org/licenses/by/4.0See article on publisher's website: http://dx.doi.org/10.1007/s12369-020-00626-z

Social robots have shown some efficacy in assisting children with autism and are now being considered as assistive tools for therapy. The physical proximity of a small companion social robot could become a source of harm to children with autism during aggressive physical interactions. A child exhibiting challenging behaviors could throw a small robot that could harm another child’s head upon impact. In this paper, we investigate the effects of the mass and shape of objects thrown on impact at different velocities on the linear acceleration of a developed dummy head. This dummy head could be the head of another child or a caregiver in the room. A total of 27 main experiments were conducted based on Taguchi’s orthogonal array design. The data were then analyzed using ANOVA and then optimized based on the signal-to-noise ratio. Our results revealed that the two design factors considered (i.e. mass and shape) and the noise factor (i.e. impact velocities) affected the response. Finally, confirmation runs at the optimal identified shape and mass (i.e. mass of 0.3 kg and shape of either cube or wedge) showed an overall reduction in the resultant peak linear acceleration of the dummy head as compared to the other conditions. These results have implications on the design and manufacturing of small social robots whereby minimizing the mass of the robots can aid in mitigating the potential harm to the head due to impacts.Other Information Published in: SN Applied Sciences License: https://creativecommons.org/licenses/by/4.0See article on publisher's website: http://dx.doi.org/10.1007/s42452-019-1447-7

Social robots are being considered to be a part of the therapy for children with autism due to the reported efficacy such technology in improving the outcomes. How ever, children diagnosed with autism exhibit challenging behaviors that could cause harm to themselves and to others around them. Throwing, hitting, kicking, and self harming are some examples of the challenging behaviors that were reported to occur among this population. The occurrence of such behaviors during the presence of a social robot could raise some safety concerns. For this reason, this research attempts toidentify the potential for harm due to the diffusion of social robots and investigate means to mitigate them. Considering the advancement in technology and the progress made in many computer science disciplines are making small and adaptable social robots a foreseeable possibility, the studies presented here focus on small robotic form factors.The first study quantities the potential harm to the head due to one of the identi?ed risky scenarios that might occur between a child and a social robot. The results re leaved that the overall harm levels based on the selected severity indices are relatively low compared to their respective thresholds. However, the investigation of harm due to throwing of a small social robot to the head revealed that it could potentially causet issue injuries, sub-concussive or even concussive events in extreme cases. The second two studies are aimed to make small robots safer by optimizing their design. Hence,studies are conducted investigating how robot design can be made safer by investigating different design factors. The study investigated the in?uence of the mass and shape on the linear acceleration of a developed dummy head. The results revealed that the two design factors considered (i.e. mass and shape) affected the resultant response. The second study investigated the in offence three different soft material sonthesa meresponse. The endings showed that the control factors considered are not statistically significant in attenuating the response. Finally, the last two studies attempt to make small robots more adaptable to promote safer interactions. This is carried out by em bedding the recognition of unwanted physical interactions into companion robot with the appropriate timing of responses. The findings of the first study highlight the pos sibility of characterizing children's negative interactions with robotic toys relying on accelerometer sensor. The second study showed that producing a late response to an action (i.e. greater than 1.0 s) could negatively affect the children's comprehension of the intended message. The work presented in this dissertation is multidisciplinary that involves the field of Mechanical Engineering and Information Technology.