Search

Ternary hybrid nanofluids possess improved thermal characteristics, enhanced stability, better physical strength, and multi-functionality as compared to hybrid or usual nanofluids. The aim of the ongoing study is to explore the novel thermal attributes of hybrid and trihybrid nanofluids through a porous medium. Whereas the nano-composition of cobalt (Co), gold (Au), and zirconium oxide (ZrO2) make amalgamation in the paraffin (Pfin) which is a base fluid. This nano-composition of the proposed nanoparticles, specifically, subject to the base fluid Pfin has not been interpreted before. The analysis not only covers the features of trihybrid nanofluids (Co–Au–ZrO2–Pfin) but it also describes the characteristics of hybrid (Co–Au–Pfin) as well as pure nanofluids (Co–Pfin). An efficient numerical algorithm is developed for which the numerical simulations are carried out. The approximations are performed in MATLAB software using “Successive under Relaxation (SUR)” technique. A comparison, under certain limiting conditions, with the established results appraises the efficiency of the numerical code. The outcomes evidently designate that temperature raises with the change in thermal radiation and volume fraction of gold and zirconium oxide in either case of pure, hybrid, or ternary nanofluids. The concentration ϕ3{\phi }_{3} of ZrO2 has a significant impact on Nusselt number rather than the concentration ϕ1{\phi }_{1} of cobalt and ϕ2{\phi }_{2} of gold. It has been comparatively noticed that the ternary nanofluids (Co–Au–ZrO2–Pfin) portray embellished and improvised thermal characteristics as compared to the other two cases.

In the current study, we focus on the Magneto-Marangoni convective flow of dusty tangent hyperbolic nanofluid (TiO2 – kerosene oil) over a sheet in the presence of thermophoresis particles deposition and gyrotactic microorganisms. Along with activation energy, heat source, variable viscosity, and thermal conductivity, the Dufour-Soret effects are taken into consideration. Variable surface tension gradients are used to identify Marangoni convection. Melting of drying wafers, coating flow technology, wielding, crystals, soap film stabilization, and microfluidics all depend on Marangoni driven flow. This study’s major objective is to ascertain the thermal mobility of nanoparticles in a fluid with a kerosene oil base. To improve mass transfer phenomena, we inserted microorganisms into the base fluid. By using similarity transformations, the resulting system of nonlinear partial differential equations is converted into nonlinear ordinary differential equations. Using a shooting technique based on RKF-45th order, the numerical answers are obtained. For various values of the physical parameters, the local density of motile microorganisms, Nusselt number, skin friction, and Sherwood number are calculated. The findings demonstrated that as the Marangoni convection parameter is raised, the velocity profiles of the dust and fluid phases increase, but the microorganisms, concentration, and temperature profiles degrade in both phases.

Thermal energy from the Sun comes mostly from sunlight. These energies might be used in photovoltaic cells, sustainable power systems, solar light poles, and water-collecting solar pumps. This age studies solar energy and how direct sunshine might improve solar panel efficiency. Solar energy, especially solar tiles, is widely used in manufacturing today. The literature includes a modified Buongiorno hybrid nanofluid prototype. There are no studies that have examined the impact of tri-hybrid and unique tetra hybridity nanomolecules integrated with the Buongiorno nanofluid prototype on liquid moving on a flexible surface. This study examines the effects of an improved Buongiorno tetra hybrid nanoliquid prototypical with Buongiorno and Tiwari–Das nanofluid on magnetized double-diffusive binary nanofluid with cross fluid and Maxwell liquid flowing with variant thermal conductance over a porous medium. Different profiles include diffusion thermo and thermo diffusion. The LobattoIIIA scheme’s convergence and stability are examined in terms of residual error, mesh points for ordinary differential equations (ODEs), and boundary conditions. Leading equations about liquid flow continuity, impetus, temperature, and concentricity are obtained using continuity, conservation of momentum, the second law of thermodynamics, Fick’s second law of diffusion, and boundary layer expectations. The system of partial differential equations obtained from the given assumption becomes a system of ODEs and well-established LobattoIII. Their numerical solution is obtained using a numerical technique. Statistical charts and tables provide numerical solutions. The heat transport rate of tetra-hybrid nanomolecules increases dramatically, unlike tri- and di-hybrid nanomolecules. The improved Buongiorno tetra hybrid nanofluid (BTHNF) model produces more heat when radiation Rd{\rm{Rd}}, Brownian diffusion Nb{\rm{Nb}}, and thermal conductivity are increased. The data show that the diffusion factor LL, Brinkman number Br{\rm{Br}}, and Reynolds number Re increase entropy production, but Bejan number reduces it owing to an increase in Be{\rm{Be}} and Re\mathrm{Re}. A statistical regression study shows that retaining the Maxwell fluid parameter constant and increasing the Weissenberg number We{\rm{We}} decrease the drag coefficient error. A BTHNF model containing tetra hybrid nanoparticles has not been utilized to examine heat and mass transferences in non-Newtonian fluids, considering diffusion, thermo, and thermo diffusion. Entropy generation in a binary fluid with tetra hybrid nanoparticles and BTHNF has not been studied. Tetra hybrid nanofluid is not mentioned in the literature. This effort aims to create a new tetra-hybrid nanofluid model. This article is novel because it investigates the effects of thermal radiation, thermal conductivity, porosity, Darcy–Forchheimer, and Buongiorno models on a tetra-hybrid nanofluid flow under an extensible sheet.

In the evolving landscape of sustainable energy, optimizing geothermal power systems presents a critical challenge. This study explores the energy and exergy efficiencies of a power production system utilizing a single‐flash geothermal cycle integrated with a trans‐critical CO2 cycle. The study's methodology involves a detailed examination of key performance parameters—separator pressure, CO2 turbine intake pressure, and steam turbine output pressure. Utilizing the EES software environment, the study innovatively employs a combination of Genetic Algorithm (GA), Nelder–Mead Simplex (NMS) method, and Direct algorithm (DA). When using GA, NMS and DA, the system's exergy efficiency increases from 32.46% in the default operating mode to 39.21%, 36.16%, and 38.82%, respectively. One of the notable outcomes is the identification of optimal separator pressure for maximum energy efficiency. Furthermore, the study reveals that increasing the CO2 turbine's inlet pressure adversely impacts the system's efficiency. The study's results contribute significantly to the field of renewable energy, offering practical guidelines for enhancing the performance of geothermal power systems. [ABSTRACT FROM AUTHOR]