Search

The properties of graphene oxide foils were modified by excimer laser irradiation at different fluences and times. The irradiations were performed in air and in vacuum using a pulsed UV laser operating at 248-nm wavelength and 23-ns pulse duration. Measurements of ablation yield, microscope surface morphology and Raman spectroscopy were performed. The residual surface shows a significant oxygen reduction due to the removing of functional oxygen groups, a thickness reduction due to the removal of graphene layers depending on the used laser shots and a presence of defects in the graphene sheets as evident by the Raman spectroscopy investigation.

Thin sheets of ultra-high molecular weight polyethylene (UHMWPE), both in pristine form and containing carbon nanotubes (CNTs) or Fe2O3 nanoparticles (NPs) at different concentrations, were prepared. The CNT and Fe2O3 NP weight percentages used ranged from 0.01% to 1%. The presence of CNTs and Fe2O3 NPs in UHMWPE was confirmed by transmission and scanning electron microscopy and by energy dispersive X-ray spectroscopy analysis (EDS). The effects of the embedded nanostructures on the UHMWPE samples were studied using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and UV–Vis absorption spectroscopy. The ATR-FTIR spectra show the characteristic features of the UHMWPE, CNTs, and Fe2O3. Concerning the optical properties, regardless of the type of embedded nanostructures, an increase in the optical absorption was observed. The allowed direct optical energy gap value was determined from the optical absorption spectra: in both cases, it decreases with increasing CNT or Fe2O3 NP concentrations. The obtained results will be presented and discussed.

The laser spallation effect due to intense shockwaves caused by a brief and intense laser pulse irradiating a target surface, 2 mm thick, has been investigated for silver and other materials. For 300 ps IR laser pulse, at intensities of the order of 10(16) W/cm(2), the shockwave may produce deformations of the back-face in ductile materials, such as Ag, Cu and Al. In heavy materials with high tensile strength, such as Ta, the shockwave produces cracks in the bottom of the laser crater but not deformation in the back-face, while in brittle materials, such as monocrystalline Ge, it produces only superficial cracks and flaking, but not deformation and spallation of the back-face. In thick polymeric materials, such as high-density polyethylene, the ablated crater shape is well defined and the shockwave is strongly damped, and no deformation has been observed in the back-face. The laser ablation yield and the ion acceleration in the backward direction have been measured by mass lost and time-of-flight measurements. SEM microscopy of the different irradiated targets, showing details of the crater size, edges, flaking and deformation in the back-face, useful for a discussion on the shockwave propagation and shock pressure calculation, is presented.

Emerging evidence suggests that diets rich in plant-based foods and beverages may exert plausible effects on human health tackling the risk of chronic diseases. Although the data are promising for numerous outcomes, including cardiovascular diseases, the data on mental health are limited. The aim of this study was to investigate the association between individual polyphenol-rich beverages intake and mental health outcomes, such as perceived stress, depressive symptoms, and sleep quality, among adult individuals living in the Mediterranean area. The demographic and dietary characteristics of a sample of 1572 adults living in southern Italy were analysed. Multivariate logistic regression analyses, controlling for confounding factors, were used to calculate odds ratios (ORs) and 95% confidence intervals (CIs) of the association between individual polyphenol-rich and alcoholic beverages containing polyphenols and mental health outcomes. The multivariate model adjusted for background covariates and the Mediterranean diet showed that individuals with a moderate intake (up to 1 cup/glass per day) of coffee and tea were less likely to have high perceived stress (OR = 0.61, 95% CI: 0.45–0.84) and depressive symptoms (OR = 0.56, 95% CI: 0.39–0.80), respectively. Furthermore, regular coffee and moderate/regular red wine drinkers were less likely to have depressive symptoms (OR = 0.72, 95% CI: 0.54–0.95 and OR = 0.74, 95% CI: 0.54–0.99, respectively). No significant associations were retrieved for the intake of polyphenol-rich and alcoholic beverages and sleep quality. In conclusion, the results of the present study suggest that polyphenol-rich beverages may be associated with mental health, in terms of depressive symptoms and perceived stress. Nonetheless, further research exploring how the polyphenol-rich beverages impact brain health and what the optimal patterns of consumption are for different populations are warranted.

Stressful experiences early in life, especially in the prenatal period, can increase the risk to develop depression during adolescence. However, there may be important qualitative and quantitative differences in outcome of prenatal stress (PNS), where some individuals exposed to PNS are vulnerable and develop a depressive-like phenotype, while others appear to be resilient. PNS exposure, a well-established rat model of early life stress, is known to increase vulnerability to depression and a recent study demonstrated a strong interaction between transforming growth factor-β1 (TGF-β1) gene and PNS in the pathogenesis of depression. Moreover, it is well-known that the exposure to early life stress experiences induces brain oxidative damage by increasing nitric oxide levels and decreasing antioxidant factors. In the present work, we examined the role of TGF-β1 pathway in an animal model of adolescent depression induced by PNS obtained by exposing pregnant females to a stressful condition during the last week of gestation. We performed behavioral tests to identify vulnerable or resilient subjects in the obtained litters (postnatal day, PND > 35) and we carried out molecular analyses on hippocampus, a brain area with a key role in the pathogenesis of depression. We found that female, but not male, PNS adolescent rats exhibited a depressive-like behavior in forced swim test (FST), whereas both male and female PNS rats showed a deficit of recognition memory as assessed by novel object recognition test (NOR). Interestingly, we found an increased expression of type 2 TGF-β1 receptor (TGFβ-R2) in the hippocampus of both male and female resilient PNS rats, with higher plasma TGF-β1 levels in male, but not in female, PNS rats. Furthermore, PNS induced the activation of oxidative stress pathways by increasing inducible nitric oxide synthase (iNOS), NADPH oxidase 1 (NOX1) and NOX2 levels in the hippocampus of both male and female PNS adolescent rats. Our data suggest that high levels of TGF-β1 and its receptor TGFβ-R2 can significantly increase the resiliency of adolescent rats to PNS, suggesting that TGF-β1 pathway might represent a novel pharmacological target to prevent adolescent depression in rats.

Spherical gold nanoparticles (NPs), 10 nm in diameter, have been dispersed in a type of polydimethylsiloxane, whose polymerisation requires accurate temperature control. At the temperature of 100°C, the polymerisation of the polydimethylsiloxane matrix is completed in 15 min, whereas at room temperature (∼20°C), it takes about 24–48 h. Gold NPs were incorporated into polydimethylsiloxane after which the resulting nanocomposites were placed in an oven preheated to 100°C for different curing times. Both porous and bulk nanocomposites were obtained using a bottom-up approach. Polydimethylsiloxane (PDMS) nanocomposites with the weight-percentage concentration of 0.2% of Au NPs were cured for 15, 30 and 45 min. Different curing times have affected the Au-NP properties. The network of porous PDMS nanocomposite promotes a uniform anchoring of the gold NPs. The porous PDMS nanocomposite samples, prepared using the sugar-template method, have been compared with the bulk counterpart to obtain a full characterisation of the material. The dependence of the morphological and electrical properties of gold NPs on their size has been studied by atomic-force microscopy and two-point-probe electrical-conductivity measurement. The optical performance of the bulk PDMS nanocomposites has been analysed by ultraviolet–visible (UV–vis) spectroscopy in the transmission mode. An enhancement of the absorption was observed after the increase of both the nanocomposite-curing time and the percentage of the Au NPs used as fillers. The fabricated nanocomposite can be used to manufacture optical-sensing devices, switches in optoelectronics and optical waveguides.

A compressible capacitive mechanical pressure sensor has been developed. Porous polydimethylsiloxane (p-PDMS) has been chosen as dielectric insulator because of its dielectric constant value. Gold nanoparticles have been embedded in p-PDMS to change the dielectric properties and to tune its elasticity. p-PDMS and its nanocomposite have been synthesized using the sugar leaching process. The p-PDMS physical characterization, with and without the gold nanoparticles, has been conducted to investigate its elastic response to compressive stresses as a function of both the polymer preparation thermal treatment and the gold nanoparticle concentration. A sensor operating in a low-pressure range between about 100 Pa and 10 kPa with a strain ranging between about 5% and 95% has been realized. Dielectric constant and electrical resistivity measurements have been performed using samples with a starting volume of the order of 1 cm3. The relationship between the dielectric constant, the electrical resistivity and the compressive stress/strain has been also deduced. The described sensor is flexible, biocompatible, water equivalent and can have applications in biomedicine (orthopedic, dentistry), engineering (stress–strain measurements, robotics), and microelectronics (microbalances, stress test on electronic devices).

The INFN-CIMA project deals with the employment of graphene, graphene oxide (GO) and reduced graphene oxide (rGO) for applications in Nuclear Physics. In particular, the project aim is that to use ...

Pulsed IR lasers were employed to irradiate high boiling elements, such as C, Mo, Ta, W and Re, in high vacuum. The ablation yield, given in terms of removed mass per pulse, was investigated using ...

This paper presents some experimental results about the 7Li, 11B and 19F (p, α) nuclear reactions developed using proton beams at energy below 3 MeV in order to be applied to protontherapy. The energy released by proton beams during radiotherapy acts mainly at the end of the proton path in the biological medium, where it increases at high density inside the tumor. At this depth, it is possible to inject in the tumor compounds containing Li, B and F to generate energetic alpha particles from nuclear reactions. At the proton Bragg peak position it is possible to produce 1–8 MeV alpha particles, which enhance the energy density deposited in the tumor increasing the probability to damage the cells. Thanks to the higher relative biological efficiency of the alpha particles with respect to protons, it is expected that the alpha synergic particles defeat the tumor at lower doses.

The dopamine D3 receptor (D3R) plays a prominent role in the modulation of cognition in healthy individuals, as well as in the pathophysiological mechanism underlying the cognitive deficits affecting patients suffering from neuropsychiatric disorders. At a therapeutic level, a growing body of evidence suggests that the D3R blockade enhances cognitive and thus it may be an optimal therapeutic strategy against cognitive dysfunctions. However, this is not always the case because other ligands targeting the D3R, and behaving as partial agonists or biased agonists, may exert their pro-cognitive effect by maintaining adequate level of dopamine in key brain areas tuning cognitive performances. In this chapter, we review and discuss preclinical and clinical findings with the aim to remark the crucial role of the D3R in cognition and to strengthen the message that drugs targeting D3R may be excellent cognitive enhancers for the treatment of several neuropsychiatric and neurological disorders.

On the perspective to develop CuO–TiO2 MOS, multilayered Cu and Ti thin layers were alternatively deposited on silicon wafers using 25 keV Ar + ion beam sputtering and, subsequently, oxidized by thermal annealing in air at 400 °C for 24 h. The deposited films have variable ratios of the Cu and Ti % at. One of the main goal is to obtain such multilayers avoiding the presence of Cu–Ti–O compounds. The samples were characterized in terms of composition (by RBS and SIMS analyses) and morphology (by AFM and SEM investigations). In particular, SIMS maps allows to observe the spatial distribution and thickness of each phase of the Cu/Ti multilayers, and further to observe Cu diffusion and mixing with Ti, as well as phase separation of CuO and TiO2 in the samples. The reasons of this effect represent an open issue that has to investigated, in order to improve the MOS fabrication.

2.0 MeV proton beam accelerated at Tandetron is extracted in air through a thin film and allowed to scatter to irradiate the cell culture attached to the polymeric base of a biological flask. The irradiated cells were human medulloblastoma cell line Daoy treated with and without 5 nm sized spherical gold nanoparticles. Proton doses from 0.5 to 1.5 Gy have been employed to irradiate the cultures and to investigate the role of the radiotherapy performed with and without the use of the gold nanoparticles. Results indicated that cell survival is significantly reduced to about 50% when the nanoparticles at a concentration of about 6 × 1013 particles/ml are employed.

Reduced graphene oxide (rGO) is a two-dimensional material, which is attracting increasing attention due to its special properties. It can be obtained by laser or ion beam irradiations of pristine ...

Gold nanoparticles were prepared by laser ablation in water and then characterized through physical analyses, in the perspective to be employed for different applications in the fields of P...

Advanced targets based on thin foils of graphene oxide (GO) covered by metallic layers show many advantages with respect to others because permit high proton and light ion acceleration using high intensity pulsed lasers in Target-Normal Sheath-Acceleration (TNSA) regime. GO foils contain parallel micrometric graphene sheets, have low density, show high penetration, and low scattering by energetic electrons accelerated by laser, inducing electron channelling effects. They contain high concentrations of hydrogen, water, and functional oxygen groups, can be realized as thin films with high mechanical resistance, and show high photon absorbance for laser beams. In this work, we present experimental results obtained by our research group using thin GO targets covered by thin gold films, prepared in our laboratories. Advanced targets have been irradiated in TNSA regime with 40 fs laser pulses at the intensity of the order of 10(19) W/cm(2), using a laser spot of about 10 microns diameter, permitting to accelerate ions at energies of the order of 6 MeV per charge state. The electric field of ion acceleration can be increased by optimizing the irradiation conditions and the GO and Au film thicknesses. The novel findings of this work concern the high forward ion acceleration obtained using thin targets containing GO which induces the effect of electron channelling and production of high-density forward plasma. The plasma diagnostics are developed with fast SiC semiconductor detectors connected in time-of-flight (TOF) configuration. The fast semiconductor detector response permits to optimize the ion acceleration conditions by changing the distance of the laser focus with respect to the target surface, the incidence angle and the laser parameters.

Intestinal cell dysfunctions involved in obesity and associated diabetes could be correlated with impaired intestinal cell development. To date, the molecular mechanisms underlying these dysfunctions have been poorly investigated because of the lack of a good model for studying obesity. The main aim of this study was to investigate the effects of lipotoxicity on intestinal cell differentiation in small intestinal organoid platforms, which are used to analyze the regulation of cell differentiation. Mouse intestinal organoids were grown in the presence/absence of high palmitate concentrations (0.5 mM) for 48 h to simulate lipotoxicity. Palmitate treatment altered the expression of markers involved in the differentiation of enterocytes and goblet cells in the early (Hes1) and late (Muc2) phases of their development, respectively, and it modified enterocytes and goblet cell numbers. Furthermore, the expression of enteroendocrine cell progenitors (Ngn3) and I cells (CCK) markers was also impaired, as well as CCK-positive cell numbers and CCK secretion. Our data indicate, for the first time, that lipotoxicity simultaneously influences the differentiation of specific intestinal cell types in the gut: enterocytes, goblet cells and CCK cells. Through this study, we identified novel targets associated with molecular mechanisms affected by lipotoxicity that could be important for obesity and diabetes therapy.

Hydroxyapatite (HAp) present in bones has been studied and characterized using different physical analyses. Optical and scanning electron microscopies (SEM), Energy dispersive X-ray (EDX) analysis, X-ray diffraction (XRD), attenuated total reflectance (ATR) - Fourier transform infrared (FTIR) spectroscopy have been employed. Particular attention has been given to the sample preparation as well to the lyophilization processes of bones, which can be employed for different applications. Pulse laser irradiation has been employed to deposit biocompatible thin HAp films in vacuum on Ti substrates. The prepared biocompatible substrates, which can be employed for metallic load prostheses, have been compared with the bone surface.

Schizophrenia is a disorder characterized by cognitive impairment and psychotic symptoms that fluctuate over time and can only be mitigated with the chronic administration of antipsychotics. Here, we propose biodegradable microPlates made of PLGA for the sustained release of risperidone over several weeks. Two microPlate configurations – short: 20 × 20 × 10 μm; tall: 20 × 20 × 20 μm – are engineered and compared to conventional ~ 10 μm PLGA microspheres in terms of risperidone loading and release. Tall microPlates realize the slowest release documenting a 35% risperidone delivery at 100 days with a residual rate of 30 ng/ml. Short microPlates and microspheres present similar release profiles with over 50% of the loaded risperidone delivered within the first 40 days. Then, the therapeutic efficacy of one single intraperitoneal injection of risperidone microPlates is compared to the daily administration of free risperidone in heterozygous knockout mice for dysbindin-1, a clinically relevant mouse model of cognitive and psychiatric liability. In temporal order object recognition tasks, mice treated with risperidone microPlates outperform those receiving free risperidone up to 2, 4, 8, and 12 weeks of observation. This suggests that the sustained release of antipsychotics from one-time microPlate deposition can rescue cognitive impairment in dysbindin mice for up to several weeks. Overall, these results demonstrate that risperidone-loaded microPlates are a promising platform for improving cognitive symptoms associated to schizophrenia. Moreover, the long-term efficacy with one single administration could be of clinical relevance in terms of patient’s compliance and adherence to the treatment regimen. Graphical abstract Single injection of long-acting risperidone-loaded µPL ameliorates the dysbindin-induced deficit in a clinically relevant mouse model of cognitive and psychiatric liability for up to 12 weeks

The pulsed laser cleaning (PLC) technique employing different laser wavelengths, with a ns pulse duration, is presented. Such a technique can be applied to the preservation of cultural heritage artworks on different materials, like metals, ceramics and glasses to clean the surfaces of debris accumulated over the years, to remove the oxidation layers, the dust, the organic materials and other unwanted layers, restoring their original composition and shape. PLC should be preceded by surface analyses to control the state of the surface before and during the cleaning process, which has to be carefully controlled, in order to stop the cleaning before to damage the underlying original surface. PLC examples, applied to metals, terracotta and glazy ceramics, are presented and discussed using IR, visible and UV pulsed laser irradiations at low intensity.

Chemiresistors based on thin films of the Li-doped CuO–TiO2 heterojunctions were synthesized by a 2-step method: (i) repeated ion beam sputtering of the building elements (on the Si substrates and multisensor platforms), and (ii) thermal annealing in flowing air. The structure and composition of the films were analyzed by several methods: Rutherford Backscattering (RBS), Neutron Depth Profiling (NDP), Secondary Ion Mass Spectrometry (SIMS), and Atomic Force Microscopy (AFM), and their sensitivity to gaseous analytes was evaluated using a specific lab-made device operating in a continuous gas flow mode. The obtained results showed that the Li doping significantly increased the sensitivity of the sensors to oxidizing gases, such as NO2, O3, and Cl2, but not to reducing H2. The sensing response of the CuO–TiO2–Li chemiresistors improved with increasing Li content. For the best sensors with about 15% Li atoms, the detection limits were as follows: NO2&nbsp, → 0.5 ppm, O3→ 10 ppb, and Cl2→ 0.1 ppm. The Li-doped sensors showed excellent sensing performance at a lower operating temperature (200 ∘C), however, even though their response time was only a few minutes, their recovery was slow (up to a few hours) and incomplete.

Proton acceleration can be induced by non-equilibrium plasma developed by high-intensity laser pulses, at 1016 W/cm2, irradiating different types of thin polyethylene targets. The process of proton acceleration and directive yield emission was investigated, optimizing the laser parameters, the irradiation conditions, and the target properties. The use of 600 J pulse energy, a laser focalization inducing self-focusing effects and advanced targets with embedded nanoparticles and optimal thicknesses, has permitted to accelerate forward protons up to the energies of about 6 MeV and amount of the order of 1015 H+/pulse. High proton energy is obtained using thin foils enriched with gold nanoparticles, whereas high proton yield is obtained using targets with a thickness of about 10 μm. The plasma diagnostics using SiC semiconductor detectors in time-of-flight configuration was fundamental to monitor the optimal conditions to improve the plasma processes concerning the ion acceleration and the X-ray and relativistic electron emission.

Gafchromic HD-V2 films are employed to study the response to light ions useful in radiotherapy, such as protons, helium and carbon beams. The effects induced by the ions at an energy within about 300 keV and 16 MeV were investigated in terms of optical absorbance measurements in the irradiated active region of the film. The employed ion doses range between 0.4 Gy and 12 kGy. The results show that the net optical density increases almost exponentially with the absorbed dose and that it becomes saturated after prolonged dose higher than 1 kGy. The optical density produced in the film was measured by light transmission measurements at 700 nm wavelength, at which is observed the highest gafchromic sensitivity. Calibration curves of optical density versus exposure dose and type of ion are given. The dependence on the ion stopping power was presented and discussed.

This work introduces an innovative new method to transport gold nanoparticles (Au-NPs) toward specific organs using as transporter the M13 filamentous phage. The aim is to improve the radiotherapy efficiency by injecting gold nanoparticles in the tumor tissues in order to increase the effective atomic number and, consequently, to produce higher locally deposited doses. The biocompatible Au-NPs can be bonded to the phage surface for their transport in the biological fluids and tissues. M13 phages can be prepared to arrive in specific tissues and organs depending on their biochemical preparation and functionalization. Evidence about the real attachment of spherical Au-NPs, 10 nm in diameter, to the M13 phages is obtained using different microscopies. Other analyses have been also performed to evaluate the number of gold nanoparticles that can be transported by M13 phages inside the organism. Our results on the study of the spherical Au-NP size distribution, deduced by AFM, EFM, and TEM analyses, have indicated that in average, 2 couples of Au-NPs are attached to each phage. Moreover, the size of the NPs ranges between 10 and 30 nm, demonstrating a little aggregation of the nanoparticles, which remain usefully sized to be vehicled with the blood flux towards specific organs.

A Nd:YAG laser operating at 1064 nm was used to irradiate, at different intensities, graphene oxide foils placed in vacuum and in air. The laser irradiated GO foils were analysed successively by using different techniques such as 2.0 MeV alpha particle Rutherford backscattering spectrometry, X-ray photoemission spectroscopy and SEM-EDX. In particular, in vacuum irradiated graphene oxide samples the oxygen reduction has been observed with increment of the carbon content. In air irradiated GO samples an increase in oxygen has instead been highlighted. Furthermore thermal and chemical effects are induced by the photon irradiation. Results will be presented and discussed.

Dietary polyphenols have been the focus of major interest for their potential benefits on human health. Several preclinical studies have been conducted to provide a rationale for their potential use as therapeutic agents in preventing or ameliorating cognitive decline. However, results from human studies are scarce and poorly documented. The aim of this review was to discuss the potential mechanisms involved in age-related cognitive decline or early stage cognitive impairment and current evidence from clinical human studies conducted on polyphenols and the aforementioned outcomes. The evidence published so far is encouraging but contrasting findings are to be taken into account. Most studies on anthocyanins showed a consistent positive effect on various cognitive aspects related to aging or early stages of cognitive impairment. Studies on cocoa flavanols, resveratrol, and isoflavones provided substantial contrasting results and further research is needed to clarify the therapeutic potential of these compounds. Results from other studies on quercetin, green tea flavanols, hydroxycinnamic acids (such as chlorogenic acid), curcumin, and olive oil tyrosol and derivatives are rather promising but still too few to provide any real conclusions. Future translational studies are needed to address issues related to dosage, optimal formulations to improve bioavailability, as well as better control for the overall diet, and correct target population.

Post-traumatic stress disorder (PTSD) is a neuropsychiatric disorder occurring in susceptible individuals following a traumatic event. Understanding the mechanisms subserving trauma susceptibility/resilience is essential to develop new effective treatments. Increasing evidence suggests that non-coding RNAs, such as microRNAs (miRNAs), may play a prominent role in mediating trauma susceptibility/resilience. In this study, we evaluated the transcriptional expression of two key PTSD-related genes (FKBP5 and BDNF) and the relative targeting miRNAs (miR-15a-5p, miR-497a-5p, miR-511-5p, let-7d-5p) in brain areas of PTSD-related susceptible and resilient mice identified through our recently developed mouse model of PTSD (arousal-based individual screening (AIS) model). We observed lower transcript levels of miR-15a-5p, miR-497a-5p, and miR-511a-5p in the hippocampus and hypothalamus of susceptible mice compared to resilient mice, suggesting that the expression of these miRNAs could discriminate the two different phenotypes of stress-exposed mice. These miRNA variations could contribute, individually or synergically, to the inversely correlated transcript levels of FKBP5 and BDNF. Conversely, in the medial prefrontal cortex, downregulation of miR-15a-5p, miR-511-5p, and let-7d-5p was observed both in susceptible and resilient mice, and not accompanied by changes in their mRNA targets. Furthermore, miRNA expression in the different brain areas correlated to stress-induced behavioral scores (arousal score, avoidance-like score, social memory score and PTSD-like score), suggesting a linear connection between miRNA-based epigenetic modulation and stress-induced phenotypes. Pathway analysis of a miRNA network showed a statistically significant enrichment of molecular processes related to PTSD and stress. In conclusion, our results indicate that PTSD susceptibility/resilience might be shaped by brain-area-dependent modulation of miRNAs targeting FKBP5, BDNF, and other stress-related genes.

Dopamine receptors (DRs) are generally considered as mediators of vasomotor functions. However, when used in pharmacological studies, dopamine and/or DR agonists may not discriminate among different DR subtypes and may even stimulate alpha1 and beta-adrenoceptors. Here, we tested the hypothesis that D2R and/or D3R may specifically induce vasoconstriction in isolated mouse aorta. Aorta, isolated from wild-type (WT) and D3R−/− mice, was mounted in a wire myograph and challenged with cumulative concentrations of phenylephrine (PE), acetylcholine (ACh), and the D3R agonist 7-hydrxy-N,N-dipropyl-2-aminotetralin (7-OH-DPAT), with or without the D2R antagonist L741,626 and the D3R antagonist SB-277011-A. The vasoconstriction to PE and the vasodilatation to ACh were not different in WT and D3R−/−, in contrast, the contractile responses to 7-OH-DPAT were significantly weaker in D3R−/−, though not abolished. L741,626 did not change the contractile response induced by 7-OH-DPAT in WT or in D3R−/−, whereas SB-277011-A significantly reduced it in WT but did not in D3R−/−. D3R mRNA (assessed by qPCR) was about 5-fold more abundant than D2R mRNA in aorta from WT and undetectable in aorta from D3R−/−. Following transduction with lentivirus (72-h incubation) delivering synthetic microRNAs to specifically inactivate D2R (LV-miR-D2) or D3R (LV-miR-D3), the contractile response to 7-OH-DPAT was unaffected by LV-miR-D2, while it was significantly reduced by LV-miR-D3. These data indicate that, at least in mouse aorta, D3R stimulation induces vasoconstriction, while D2R stimulation does not. This is consistent with the higher expression level of D3R. The residual vasoconstriction elicited by high concentration D3R agonist in D3R−/− and/or in the presence of D3R antagonist is likely to be unrelated to DRs.

Metal-oxide-based sensors (MOS) can be used for several technological applications in microelectronics, due to their low cost and sensitive capabilities to different chemical species. On the perspective to develop CuO–TiO2 MOS, our goal was to obtain a homogeneous intermixing of Cu and Ti in the bulk structure of the detectors, exploring the most promising combination between such elements and avoiding the presence of Cu–Ti–O compounds. To do that, several Cu and Ti thin layers were alternatively deposited by Ar+ sputtering on silicon wafers and, subsequently, oxidized by thermal annealing. The obtained samples were characterized in terms of %at. Cu–Ti ratios (by RBS and SIMS analyses) and morphology (by AFM and SEM investigations), showing the abundance ratios of such elements in the whole structure. In particular, SIMS maps allowed to study the spatial distribution and thickness of each phase of the Cu–Ti multilayers and further to observe the Cu diffusion and the mixing with Ti, as well as phase separation of CuO and TiO2 in the samples. This unwanted effect represents an open issue that has to be investigated, in order to improve the MOS fabrication.

Different ion beams, with energy from 2 MeV up to 16 MeV at different atomic number, have been employed to irradiate graphene oxide (GO) foils in vacuum. Due to effects of electron and nuclear ion stopping powers, the ion energy deposition reduces the irradiated GO foils and structurally modifies them. The ion bombarded GO foils X-ray diffraction (XRD) investigations have permitted to shed light on the different structural phases induced by the ion energy deposition. The changes in the GO foils pristine structure shift the diffraction main peak towards larger angles and produce new diffraction peaks indicating the presence of new phases, such as reduced GO (rGO), carbon nanotubes (CNT), amorphous carbon (a-C), onion like carbon (OLC) and probably new carbon allotropes. The obtained results indicate that the inner structure of the GO foils becomes more and more compact and dense with the absorbed dose, suggesting that the removal of the functional oxygen groups leads to a near graphite structure with a significant increase of the material mass density. The different structural phase modifications induced by the different ion beams as a function of the stopping power, fluence and dose will be presented and discussed in detail.

Different ion beams, from protons up to gold ions, with energy from 2 MeV up to 16 MeV, have been employed to irradiate graphene oxide (GO) foils in vacuum. The ion energy deposition reduces GO releasing functional oxygen groups. The effect of radiating ions – GO foils interaction has been investigated by Raman spectroscopy, X-Ray Diffraction (XRD) and Transmission Electron Microscopy (TEM). All the performed analyses show that both reduction and damaging depend on the fluence, the energy and the type of radiating ions. In the regime of electron stopping power the reduction is linearly dependent on the absorbed dose, while in the regime of nuclear stopping power an intense damage is produced in GO, altering the Raman spectrum and producing defects and amorphization of the material. The achieved goal was to quantify the GO's response to ionizing radiation with the aim of using the GO foil as a dosimeter for high energy ion beams.

Proton acceleration using high-intensity laser pulses, at 1016 W/cm2 was studied irradiating different types of thin metal and plastic targets having 1-micron thickness. The maximization of the proton energy process was investigated optimizing the laser parameters, the irradiation conditions and the target properties. Employing 600–700 J laser pulse energy, a focalization inducing self-focusing effects and using targets with optimized thickness, it was possible to accelerate protons up to energies of above 8 MeV. The time-of-flight diagnostics has allowed to monitor the plasma properties and to control the ion acceleration process.

Thick and thin films of Al targets were irradiated in vacuum with different IR lasers at intensities between 1010 W/cm 2 and 1019 W/cm2, with pulse duration ranging between 3 ns and 45 fs. The laser-generated plasma was monitored in forward and backward directions, from thin and thick targets, by using SiC detectors, ion collectors, ion energy analyzer, optical spectrometer, Thomson parabola spectrometer and X-ray streak camera. Ion emission shows a maximum ion acceleration proportional to the laser intensity, which reaches about 1 MeV per charge state at 1016 W/cm2. Using fs laser, Al ion acceleration occurs at energies up to about 26 MeV and protons are accelerated at energies up to about 2.0 MeV. In the used experimental conditions, the maximum ion acceleration can be controlled by the laser parameters, irradiation conditions, and target geometry, such as the pulse energy, the focal position and the target thickness. Although different lasers and irradiation conditions were employed, the produced ion charges per solid angle of detection remain comparable, as it will be discussed.

In this paper, the synthesis of macro-porous polydimethylsiloxane (PDMS) sponges decorated with reduced graphene oxide and graphene is described using a top-down approach based on the sugar templating process. Among the multiple assets enjoyed by PDMS, its elasticity and porosity make possible the uniform dispersion of embedded graphene-based material into its structure. Where possible, the optical, surface and morphology properties of both porous PDMS composites and their not porous (bulk) counterparts have been studied. Scanning transmission ion microscopy (STIM), based on the reciprocity between the beam energy loss and the sample areal density, has been used to obtain the images of the sponge internal part. A detailed spatial resolution of the PDMS microstructure has been deduced by the areal density map. The homogeneous dispersion of the fillers was observed by scanning electron microscopy (SEM) and indirectly by light transmittance measures performed in several regions of the PDMS bulk. The reduced graphene oxide and graphene introduced into PDMS significantly improve its electrical conductivity. The porosity of the presented hybrid material holds a key role for good performances in microelectronics and biomedicine.