Search

The kinetic uptake of Bovine Serum Albumin (BSA) and ferritin in mixtures by the composite anion exchanger Q HyperZ was studied. Transient adsorption experiments were performed to investigate the dominant resistance between external and internal mass transfer in simultaneous and sequential adsorption experiments. From the evolution of protein solution concentration with time, the external mass transfer coefficients determined were very low in simultaneous (7.1 10−7 and 1.1 10−7 m/s for BSA and ferritin respectively) and sequential (4.6 10−7 and 2.5 10−7 m/s for BSA and ferritin respectively) adsorption systems which is in agreement with the low agitation speed used. From the transient protein uptakes, the internal mass transfer was studied and the homogenous diffusion model applied provides a good predictability in single as well as in simultaneous and sequential adsorption experiments. The effective diffusion coefficients were determined in sequential (6.4 10−14 m2/s and 3.8 10−14 m2/s for BSA and ferritin respectively) and simultaneous (4.2 10−14 m2/s for both proteins) systems. In multi-component adsorption system, it was found that BSA was slowed down upon the presence of ferritin on mixture solutions contrarily to ferritin protein. This phenomenon, known as electrostatic coupling effect, indicates that diffusion of charged proteins in ion exchangers are not independent. HIGHLIGHTS: The description of the ferritin kinetic uptake by the homogenous diffusion model. Protein flux coupling into particles highlighted by an interdiffusion coefficient. The consistency of kinetics parameters in single and binary protein systems. [ABSTRACT FROM AUTHOR]

A new method is presented to characterize the retention dynamics of membrane processes with a new virus surrogate used as a tracer and developed in our laboratory. This virus surrogate is an enzyme-labeled MS2 bacteriophage whose activity can be directly and rapidly detected and quantified by amperometry, which is a sensitive electrochemical technique. In the first step, the amperometric measurement was developed and validated. Microfiltration and ultrafiltration experiments consisting of injecting tracers into the feed and monitoring the tracer presence in permeate (or in retentate) by amperometry, and then validating the use of the tracer and its detection technique in the field of membrane filtration. In particular, global retention experiments demonstrated the ability of this method to differentiate among membrane behaviors and dynamic experiments showed the ability of the method to characterize dynamics of retention in a reproducible way. © 2012 American Institute of Chemical Engineers AIChE J, 59: 68-78, 2013 [ABSTRACT FROM AUTHOR]

Abstract Background Glycerol is the major by-product accounting for up to 5% of the carbon in Saccharomyces cerevisiae ethanolic fermentation. Decreasing glycerol formation may redirect part of the carbon toward ethanol production. However, abolishment of glycerol formation strongly affects yeast's robustness towards different types of stress occurring in an industrial process. In order to assess whether glycerol production can be reduced to a certain extent without jeopardising growth and stress tolerance, the yeast's capacity to synthesize glycerol was adjusted by fine-tuning the activity of the rate-controlling enzyme glycerol 3-phosphate dehydrogenase (GPDH). Two engineered strains whose specific GPDH activity was significantly reduced by two different degrees were comprehensively characterized in a previously developed Very High Ethanol Performance (VHEP) fed-batch process. Results The prototrophic strain CEN.PK113-7D was chosen for decreasing glycerol formation capacity. The fine-tuned reduction of specific GPDH activity was achieved by replacing the native GPD1 promoter in the yeast genome by previously generated well-characterized TEF promoter mutant versions in a gpd2Δ background. Two TEF promoter mutant versions were selected for this study, resulting in a residual GPDH activity of 55 and 6%, respectively. The corresponding strains were referred to here as TEFmut7 and TEFmut2. The genetic modifications were accompanied to a strong reduction in glycerol yield on glucose; the level of reduction compared to the wild-type was 61% in TEFmut7 and 88% in TEFmut2. The overall ethanol production yield on glucose was improved from 0.43 g g-1 in the wild type to 0.44 g g-1 measured in TEFmut7 and 0.45 g g-1 in TEFmut2. Although maximal growth rate in the engineered strains was reduced by 20 and 30%, for TEFmut7 and TEFmut2 respectively, strains' ethanol stress robustness was hardly affected; i.e. values for final ethanol concentration (117 ± 4 g L-1), growth-inhibiting ethanol concentration (87 ± 3 g L-1) and volumetric ethanol productivity (2.1 ± 0.15 g l-1 h-1) measured in wild-type remained virtually unchanged in the engineered strains. Conclusions This work demonstrates the power of fine-tuned pathway engineering, particularly when a compromise has to be found between high product yield on one hand and acceptable growth, productivity and stress resistance on the other hand. Under the conditions used in this study (VHEP fed-batch), the two strains with "fine-tuned" GPD1 expression in a gpd2Δ background showed slightly better ethanol yield improvement than previously achieved with the single deletion strains gpd1Δ or gpd2Δ. Although glycerol reduction is known to be even higher in a gpd1Δ gpd2Δ double deletion strain, our strains could much better cope with process stress as reflected by better growth and viability.

Detecting alterations in plasmid structures is often performed using conventional molecular biology. However, these methods are laborious and time-consuming for studying the conditions inducing these mutations, which prevent real-time access to cell heterogeneity during bioproduction. In this work, we propose combining both flow cytometry and fluorescence-activated cell sorting, integrated with mechanistic modelling to study conditions that lead to plasmid recombination using a limonene-producing microbial system as a case study. A gene encoding GFP was introduced downstream of the key enzymes involved in limonene biosynthesis to enable real-time kinetics monitoring and the identification of cell heterogeneity according to microscopic and flow cytometric analyses. Three different plasmid configurations (one correct and two incorrect) were identified through cell sorting based on subpopulations expressing different levels of GFP at 10 and 50 µM IPTG. Higher limonene production (530 mg/L) and lower subpopulation proportion carrying the incorrect plasmid (12%) were observed for 10 µM IPTG compared to 50 µM IPTG (96 mg/L limonene and more than 70% of cell population carrying the incorrect plasmid, respectively) in 100 mL production culture. We also managed to derive exploratory hypotheses regarding the plasmid recombination region using the model and successfully validated them experimentally. Additionally, the results also showed that limonene production was proportional to GFP fluorescence intensity. This correlation could serve as an alternative to using biosensors for a high-throughput screening process. The developed method enables rapid identification of plasmid recombination at single-cell level and correlates the heterogeneity with bioproduction performance. KEY POINTS: • Strategy to study plasmid recombination during bioproduction. • Different plasmid structures can be identified and monitored by flow cytometry. • Mathematical modelling suggests specific alterations in plasmid structures., Competing Interests: Declarations. This article does not contain any studies with animals performed by any of the authors. Conflict of interest: The authors declare no competing interests., (© 2025. The Author(s).)

Due to the rapid increase in the world's population, many developing countries are facing malnutrition problems, including famine and food insecurity. Particularly, the deficiency of protein sources becomes a serious problem for human and animal nutrition. In this context, Single Cell Proteins, could be exploited as an alternative source of unconventional proteins. The aim of the study was to investigate SCP production and composition by Cupriavidus necator under various environmental conditions, temperature and pH values. A mono-factorial approach was implemented using batch bioreactor cultures under well-controlled conditions. Results were compared in terms of bacterial growth and SCP composition (proteins, nucleic acids, amino acids and elemental formula). Complementary analyses were performed by flow cytometry to study cell morphology, membrane permeability and the presence of Poly(3-hydroxybutyrate) (PHB) production. Our data confirmed the ability of C. necator to produce high amount of proteins (69 % DW at 30 °C and pH7). The results showed that temperature and pH independently impact SCP production and composition. This impact was particularly observed at the highest temperature (40 °C) and also the lowest pH value (pH5) providing lower growth rates, cell elongation, changes in granularity and lower amounts of proteins (down to 44 % DW at pH5) and nucleic acids. These low percentages were related to the production of PHB production (up to 44 % DW at 40 °C) which is the first report of a PHB accumulation in C. necator under nutrient unlimited conditions., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Strain robustness during production of recombinant molecules is of major interest to ensure bioprocess profitability. The heterogeneity of populations has been shown in the literature as a source of instability in bioprocesses. Thus, the heterogeneity of the population was studied by evaluating the robustness of the strains (stability of plasmid expression, cultivability, membrane integrity and macroscopic cell behavior) during well-controlled fedbatch cultures. On the context of microbial production of chemical molecules, isopropanol (IPA) has been produced by recombinant strains of Cupriavidus necator. Plasmid stability was monitored by the plate count method to assess the impact of isopropanol production on plasmid stability, depending on implanted plasmid stabilization systems for strain engineering designs. With the reference strain Re2133/pEG7c, an isopropanol titer of 15.1 g·L -1 could be achieved. When the isopropanol concentration has reached about 8 g. L -1 , cell permeability increased (up to 25 %) and plasmid stability decreased significantly (up to 1.5 decimal reduction rate) resulting in decreased isopropanol production rates. Bioprocess robustness under isopropanol producing conditions was then investigated with two plasmid construction strategies (1) Post Segregational Killing hok/sok (in Re2133/pEG20) and (2) expression of GroESL chaperon proteins (in Re2133/pEG23). Plasmid stability for strain Re2133/pEG20 (PSK hok/sok) appears to be improved up to 11 g. L -1 of IPA compared to the reference strain (8 g. L -1 IPA). Nevertheless, cell permeability followed the same dynamic as the reference strain with a drastic increase around 8 g. L -1 IPA. On the contrary, the Re2133/pEG23 strain made it possible to minimize the cell permeability (with a constant value at 5 % IP permeability) and to increase the growth capacities in response to increased isopropanol concentrations but plasmid stability was the weakest. The metabolic burden, linked to either the overexpression of GroESL chaperones or the PSK hok/sok system, seems to be deleterious for the overall isopropanol production compared to the reference strain (RE2133/pEG7c) even if we have shown that the overexpression chaperones GroESL improve membrane integrity and PSK system hok/sok improve plasmid stability as long as isopropanol concentration does not exceed 11 g L - 1 ., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Guillouet reports financial support was provided by French Ministry of Research., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Phenotypic heterogeneity in bioprocesses is suspected to reduce performances, even in case of monoclonal cultures. Here, robustness of an engineered isopropanol-overproducing strain and heterogeneity of its plasmid expression level were evaluated in fed-batch cultures. Previously, eGFP was identified as a promising plasmid expression reporter for C. necator. Here, the behavior of 3 engineered strains (isopropanol overproducer, eGFP producer, and isopropanol/eGFP co-producers) was compared at the single-cell and population levels. Production yields and rates have been shown to be dependent on isopropanol/acetone tolerance. A link could be established between the variations in the fluorescence intensity distribution and isopropanol/acetone production using the eGFP-biosensor. Co-production of isopropanol and eGFP exhibited cumulative metabolic burden compared to single overexpression (isopropanol or eGFP). Expression of eGFP during isopropanol production resulted in lower isopropanol tolerance with a loss of membrane integrity resulting in protein leakage and reduced plasmid expression. The co-expression of heterologous isopropanol pathway and eGFP-biosensor enabled to demonstrate the heterogeneity of robustness and plasmid expression at the single cell level of C. necator. It highlighted the conflicting interactions between isopropanol overproduction and eGFP reporter system. Fluorescent reporter strains, a crucial tool for monitoring subpopulation heterogeneity although biases have to be considered., Competing Interests: Competing interests The authors declare that there are no competing interests., (Copyright © 2022. Published by Elsevier Inc.)

Plasmid expression level heterogeneity in Cupriavidus necator was studied in response to stringent culture conditions, supposed to enhance plasmid instability, through plasmid curing strategies. Two plasmid curing strategies were compared based on their efficiency at generating heterogeneity in batch: rifampicin addition and temperature increase. A temperature increase from 30° to 37 °C was the most efficient plasmid curing strategy. To generate a heterogeneous population in terms of plasmid expression levels, successive batches at supra-optimal culture temperature (i.e. 37 °C) were initially conducted. Three distinct fluorescent subpopulations P 0 (not fluorescent), P 1 (low fluorescence intensity, median = 1 10 3 ) and P 2 (high fluorescence intensity, median = 6 10 3 ) were obtained. From there, the chemostat culture was implemented to study the long-term stress response under well-controlled environment at defined dilution rates. For dilution rates comprised between 0.05 and 0.10 h -1 , the subpopulation P 2 (62% vs 90%) was favored compared to P 1 cells (54% vs 1%), especially when growth rate increased. Our biosensor was efficient at discriminating subpopulation presenting different expression levels under stringent culture conditions. Plus, we showed that controlling growth kinetics had a stabilizing impact on plasmid expression levels, even under heterogeneous expression conditions., (Copyright © 2022 Elsevier B.V. All rights reserved.)

It is of major interest to ensure stable and performant microbial bioprocesses, therefore maintaining high strain robustness is one of the major future challenges in industrial microbiology. Strain robustness can be defined as the persistence of genotypic and/or phenotypic traits in a system. In this work, robustness of an engineered strain is defined as plasmid expression stability, cultivability, membrane integrity and macroscopic cell behavior and was assessed in response to implementations of sugar feeding strategies (pulses and continuous) and two plasmid stabilization systems (kanamycin resistance and Post-Segregational Killing hok/sok). Fed-batch bioreactor cultures, relevant mode to reach high cell densities and higher cell generation number, were implemented to investigate the robustness of C. necator engineered strains. Host cells bore a recombinant plasmid encoding for a plasmid expression level monitoring system, based on eGFP fluorescence quantified by flow cytometry. We first showed that well-controlled continuous feeding in comparison to a pulse-based feeding allowed a better carbon use for protein synthesis (avoiding organic acid excretion), a lower heterogeneity of the plasmid expression and a lower cell permeabilization. Moreover, the plasmid stabilization system Post-Segregational Killing hok/sok, an autonomous system independent on external addition of compounds, showed the best ability to maintain plasmid expression level stability insuring a greater population homogeneity in the culture. Therefore, in the case of engineered C. necator, the PSK system hok/sok appears to be a relevant and an efficient alternative to antibiotic resistance system for selection pressure, especially, in the case of bioprocess development for economic and environmental reasons., (© 2021. The Author(s).)

A methodology for plasmid expression level monitoring of eGFP expression suitable for dynamic processes was assessed during fermentation. This technique was based on the expression of a fluorescent biosensor (eGFP) encoded on a recombinant plasmid coupled to single-cell analysis. Fluorescence intensity at single-cell level was measured by flow cytometry. We demonstrated that promoter evaluation based on single-cell analysis versus classic global analysis brings valuable insights. Single-cell analysis pointed out the fact that intrinsic fluorescence increased with the strength of the promoter up to a threshold. Beyond that, cell permeability increases to excrete the fluorescent protein in the medium. The metabolic load due to the increase in the eGFP production in the case of strong constitutive promoters leads to slower growth kinetics compared with plasmid-free cells. With the strain Cupriavidus necator Re2133, growth rate losses were measured from 3% with the weak constitutive promoter P lac to 56% with the strong constitutive promoter P j5 . Through this work, it seems crucial to find a compromise between the fluorescence intensity in single cells and the metabolic load; in our conditions, the best compromise found was the weak promoter P lac . The plasmid expression level monitoring method was tested in the presence of a heterogeneous population induced by plasmid-curing methods. For all the identified subpopulations, the plasmid expression level heterogeneity was significantly detected at the level of fluorescence intensity in single cells. After cell sorting, growth rate and cultivability were assessed for each subpopulation. In conclusion, this eGFP biosensor makes it possible to follow the variations in the level of plasmid expression under conditions of population heterogeneity.Key Points•Development of a plasmid expression level monitoring method at the single-cell level by flow cytometry.•Promoter evaluation by single-cell analysis: cell heterogeneity and strain robustness.•Reporter system optimization for efficient subpopulation detection in pure cultures.

A metabolic flux analysis (MFA) model was developed to optimize the xylose conversion into ethanol using Candida shehatae strain. This metabolic model was compartmented and constructed with xylose as carbon substrate integrating the enzymatic duality of the first step of xylose degradation via an algebraic coefficient. The model included the pentose phosphate pathway, glycolysis, synthesis of major metabolites like ethanol, acetic acid and glycerol, the tricarboxylic acid cycle as well as the respiratory chain, the cofactor balance, and the maintenance. The biomass composition and thus production were integrated considering the major biochemical synthesis reactions from monomers to each constitutive macromolecule (i.e., proteins, lipids, polysaccharides, nucleic acids). The construction of the model resulted into a 122-linear equation system to be resolved. A first experiment allowed was to verify the accuracy of the model by comparing calculated and experimental data. The metabolic model was utilized to determine the theoretical yield taking into account oxido-reductive balance and to optimize ethanol production. The maximal theoretical yield was calculated at 0.62 Cmolethanol/Cmolxylose for an oxygen requirement of 0.33 moloxygen/molxylose linked to the cofactors of the xylose reductase. Cultivations in chemostat mode allowed the fine tuning of both xylose and oxygen uptakes and showed that lower was the oxygen/xylose ratio, higher was the ethanol production yield. The best experimental ethanol production yield (0.51 Cmolethanol/Cmolxylose) was obtained for an oxygen supply of 0.47 moloxygen/molxylose.

Background: Finely regulating the carbon flux through the glycerol pathway by regulating the expression of the rate controlling enzyme, glycerol-3-phosphate dehydrogenase (GPDH), has been a promising approach to redirect carbon from glycerol to ethanol and thereby increasing the ethanol yield in ethanol production. Here, strains engineered in the promoter of GPD1 and deleted in GPD2 were used to investigate the possibility of reducing glycerol production of Saccharomyces cerevisiae without jeopardising its ability to cope with process stress during ethanol production. For this purpose, the mutant strains TEFmut7 and TEFmut2 with different GPD1 residual expression were studied in Very High Ethanol Performance (VHEP) fed-batch process under anaerobic conditions., Results: Both strains showed a drastic reduction of the glycerol yield by 44 and 61% while the ethanol yield improved by 2 and 7% respectively. TEFmut2 strain showing the highest ethanol yield was accompanied by a 28% reduction of the biomass yield. The modulation of the glycerol formation led to profound redox and energetic changes resulting in a reduction of the ATP yield (YATP) and a modulation of the production of organic acids (acetate, pyruvate and succinate). Those metabolic rearrangements resulted in a loss of ethanol and stress tolerance of the mutants, contrarily to what was previously observed under aerobiosis., Conclusions: This work demonstrates the potential of fine-tuned pathway engineering, particularly when a compromise has to be found between high product yield on one hand and acceptable growth, productivity and stress resistance on the other hand. Previous study showed that, contrarily to anaerobiosis, the resulting gain in ethanol yield was accompanied with no loss of ethanol tolerance under aerobiosis. Moreover those mutants were still able to produce up to 90 gl-1 ethanol in an anaerobic SSF process. Fine tuning metabolic strategy may then open encouraging possibilities for further developing robust strains with improved ethanol yield.

Quantification of different physiological states of Candida shehatae cells was performed by flow cytometry associated with two fluorescent probes. Propidium iodide and carboxyfluorescein diacetate acetoxymethyl ester fluorescent dyes were chosen based on data from the literature. A staining procedure, developed from the previous works was applied to the yeast. Then, the protocol was improved to fit with fermentation constraints such as no physiological interference between the staining procedure and the cells, shortest preparation time and small amounts of dyes. From this optimisation, propidium iodide was included in the sample at 8 mg/L whereas carboxyfluorescein was first diluted in Pluronic® agent and used at 3mg/L, samples were incubated for 10 min at 40°C. Repeatability and accuracy were evaluated to validate this flow cytometry procedure for viability determination., (Copyright © 2012 Elsevier B.V. All rights reserved.)

The impact of the temperature on an industrial yeast strain was investigated in very high ethanol performance fermentation fed-batch process within the range of 30-47 °C. As previously observed with a lab strain, decoupling between growth and glycerol formation occurred at temperature of 36 °C and higher. A dynamic model was proposed to describe the impact of the temperature on the total and viable biomass, ethanol and glycerol production. The model validation was implemented with experimental data sets from independent cultures under different temperatures, temperature variation profiles and cultivation modes. The proposed model fitted accurately the dynamic evolutions for products and biomass concentrations over a wide range of temperature profiles. R2 values were above 0.96 for ethanol and glycerol in most experiments. The best results were obtained at 37 °C in fed-batch and chemostat cultures. This dynamic model could be further used for optimizing and monitoring the ethanol fermentation at larger scale., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

This work deals with the bacterial contamination of yeast, both as biofilm and in the planktonic phase. A model continuous system using self-fluorescent microorganisms was proposed to perform in vivo and in situ studies of a mixed biofilm. The yeast strain was inoculated first while the bacteria were added few days later to mimic a contamination. Supports sampled during the experiment were observed by scanning confocal laser microscopy. The behaviour of the microorganisms in real process conditions was then analysed without any treatment that could modify their physiology and/or damage the community structure. Using image analysis, the characteristics of biofilm development (microorganism ratio, 3D-organisation, growth rates) were studied and compared to the behaviour of the suspended cells in the bioreactor. Based on the biovolumes (volume occupied by each microorganism), the growth rates in biofilm for the bacteria and the yeasts were determined at 0.10 and 0.03 h(-1) respectively, while the imposed dilution rate was 0.10 h(-1). Even though the ability of yeast to develop biofilm was demonstrated, its capacity remained very low compared to that of the bacteria which quickly invaded and covered the whole yeast biofilm. This approach makes an original and powerful tool to study the competition phenomena occurring in model biofilms., (© 2012 Federation of European Microbiological Societies. Published by Blackwell Publishing Ltd. All rights reserved.)

Sludge reduction is one of the major challenges in biological wastewater treatment. One approach is to increase the sludge degradation yield together with the biodegradation kinetics. Among the various sludge pretreatment strategies proposed, thermal pretreatment at around 65 °C was described as promising. The enhancement in the biodegradation activity due to the selection of thermophilic hydrolytic bacteria was proposed, but further experiments are needed to demonstrate the specific role of these bacteria. In this study, concentrated activated sludge grown at 20 °C was subjected to thermal treatment at 65 °C for different periods. The originality of the work relied on a polyphasic approach based on the correlation between kinetics (chemical oxygen demand, COD; mixed liquor suspended solids, MLSS), bacterial activity (respirometry) and bacterial community structure (phylochip monitoring) in order to characterize the mechanisms involved in the thermal reduction of sludge. The bacterial activity in the aeration basin decreased to a very low level when recycling sludge was treated at 65 °C from 13 to 60 h, but then, started to increase after 60 h. In parallel to these fluctuations in activity, a drastic shift occurred in the bacterial community structure with the selection of thermophilic bacteria (mainly related to genera Paenibacillus and Bacillus), which are known for their specific hydrolases., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

On the basis of knowledge of the biological role of glycerol in the redox balance of Saccharomyces cerevisiae, a fermentation strategy was defined to reduce the surplus formation of NADH, responsible for glycerol synthesis. A metabolic model was used to predict the operating conditions that would reduce glycerol production during ethanol fermentation. Experimental validation of the simulation results was done by monitoring the inlet substrate feeding during fed-batch S. cerevisiae cultivation in order to maintain the respiratory quotient (RQ) (defined as the CO2 production to O2 consumption ratio) value between 4 and 5. Compared to previous fermentations without glucose monitoring, the final glycerol concentration was successfully decreased. Although RQ-controlled fermentation led to a lower maximum specific ethanol production rate, it was possible to reach a high level of ethanol production: 85 g.liter-1 with 1.7 g.liter-1 glycerol in 30 h. We showed here that by using a metabolic model as a tool in prediction, it was possible to reduce glycerol production in a very high-performance ethanolic fermentation process.