Search

Abstract Wildfires are increasingly impacting high‐elevation forests in the western United States that accumulate seasonal snowpacks, presenting a major disturbance to a critical water reservoir for the region. In the first winter following the 2020 Cameron Peak wildfire in Colorado, the peak snow water equivalent in a high burn severity forest was 17%–25% less than nearby unburned sites. The loss of the forest canopy and a lower surface albedo led to an increasingly positive net shortwave radiation balance in the burned area, resulting in melt rates that were 82%–144% greater than unburned sites and snow disappearance occurred 11–13 days earlier. Late‐season snow storms temporarily buried soot, thus increasing the albedo and delaying melt‐out by an estimated 4 days per storm in our study area. While these storms temporarily reduce the higher melt rates imposed by wildfire impacts, SNOTEL measurements show that they occur non‐uniformly across the western U.S.

Snow depth can be mapped from airborne platforms and measured in situ rapidly, but manual snow density and snow water equivalent (SWE) measurements are time consuming to obtain using traditional survey methods. As a result, the limited number of point observations are likely insufficient to capture the true spatial complexity of snow density and SWE in many settings, highlighting the value of distributed observations. Here, we combine measured two-way travel time from repeat ground-penetrating radar (GPR) surveys along a ∼150 m transect with snow depth estimates from UAV-based Structure from Motion Multi-View Stereo (SfM-MVS) surveys to estimate snow density and SWE. These estimates were successfully calculated on eleven dates between January and May during the NASA SnowEx21 campaign at Cameron Pass, CO. GPR measurements were made with a surface-coupled Sensors and Software PulseEkko Pro 1 GHz system, while UAV flights were completed using a DJI Mavic 2 Pro platform and consisted of two orthogonal flights at ∼60 m elevation above ground level. SfM-MVS derived dense point clouds (DPCs) were georeferenced using eight ground control points and evaluated using three checkpoints, which were distributed across the ∼3.5 ha study plot containing the GPR transect. The DPCs were classified to identify the snow surface and then rasterized to produce snow-on digital surface models (DSMs) at 1 m resolution. Snow depths on each survey date were calculated by differencing these snow-on DSMs from a nearly snow-off DSM collected near the end of the melt season. SfM-derived snow depths were evaluated with independent snow depth measurements from manual probing (mean r2 = 0.67, NMAD = 0.11 m and RMSE = 0.12 m). The GPR-SfM derived snow densities were compared to snow density measurements made in snowpits (r2 = 0.42, NMAD = 39 kg m−3 and RMSE = 68 kg m−3). The integration of SfM and GPR observations provides an accurate, efficient, and a relatively non-destructive approach for measuring snow density and SWE at intermediate spatial scales and over seasonal timescales. Ongoing developments in snow depth retrieval technologies could be leveraged in the future to extend the spatial extent of this method.