Search

Abstract Objective The aim of this study is to perform a qualitative and quantitative analysis of the scientific literature regarding the use of acupuncture and laser acupuncture in the treatment of pain associated with temporomandibular disorders (TMDs). The aim of this article was to assess the clinical evidence for acupuncture and laser acupuncture therapies as treatment for temporomandibular joint disorder (TMD). Materials and methods This systematic review includes randomized clinical trials (RCTs) of acupuncture and laser acupuncture as a treatment for TMD compared to other treatments. Systematic searches were conducted in 3 electronic databases up to July 2023; PubMed, EMBASE, and SCOPUS databases. All RCTs of acupuncture for TMD were searched without language restrictions. Studies in which no clinical data and complex interventions were excluded. The Cochrane risk of bias tool (RoB 2) tool was employed to analyze randomized controlled trials. A Meta-analysis was performed in order to investigate a quantitative analysis comparing acupuncture and laser acupuncture to placebo. Results A total of 11 RCTs met our inclusion criteria. The findings show that acupuncture is short-term helpful for reducing the severity of TMD pain with muscle origin. Meta-analysis revealed that the Acupuncture group and Laser Acupuncture group had a higher efficacy rate than the Placebo control group, showing a high efficacy of Acupuncture and Laser Acupuncture group in the treatment of temporomandibular. Conclusions In conclusion, our systematic review demonstrate that the evidence for acupuncture as a symptomatic treatment of TMD is limited. Further rigorous studies are, however, required to establish beyond doubt whether acupuncture has therapeutic value for this indication. However high efficacy of Laser Acupuncture in the treatment of temporomandibular disorders was reported.

Temporomandibular disorders are a group of conditions affecting the temporomandibular joints, the jaw muscles, and related structures. Patients with temporomandibular signs and/or symptoms frequently present with indications for prosthetic treatment. The management of these patients aims to achieve patient comfort, occlusal stability, and the complex restoration of the teeth. The goal of this review is to provide an overview of the relationship between prosthodontics and temporomandibular disorders and/or bruxism with a focus on the cause-and-effect implications and the strategies for planning prosthetic treatments in patients with temporomandibular disorders and/or bruxism.

Abstract Background Implant-supported overdentures offer enhanced mechanical properties, which lead to better patient satisfaction and survival rates than conventional dentures. However, it is unclear whether these satisfaction levels and survival rates depend on the number of implants supporting the overdenture. Therefore, this systematic review aimed to compare maxillary overdentures supported by four or six splinted implants in terms of patient satisfaction, implant survival, overdenture survival, and prosthodontic complications. Methods Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE (PubMed), and EMBASE databases were systematically searched and complemented by hand searching from 2000 to 2019, employing a combination of specific keywords. Studies comparing the use of four versus six implants for supporting overdentures with at least one-year of follow-up after prosthesis installation and including ten fully edentulous patients were included. The risk of bias (RoB) was analyzed with Cochrane’s RoB 2 and Newcastle–Ottawa tools. Implants and prosthesis survival rates were analyzed by random-effects meta-analysis and expressed as risk ratios or risk differences, respectively, and by the non-parametric unpaired Fisher’s test. Results A total of 15 from 1865 articles were included, and reported follow-up times after implant placement ranged from 1 to 10 years. Irrespective of the number of implants used, high scores were reported by all studies investigating patient satisfaction. Meta-analysis and non-parametric Fisher’s test showed no statistical differences regarding the survival rate of implants (P = 0.34, P = 0.3) or overdentures (P = 0.74, P = 0.9) when using 4 versus 6 splinted implants to support overdentures, and no significant differences regarding prosthodontic complications were found between groups. Randomized studies presented high RoB and non-randomized studies presented acceptable quality. Conclusions Within the limits of this systematic review, we can conclude that the bar-supported overdenture on four implants is not inferior to the overdenture supported by six implants for rehabilitating the edentulous maxilla, in terms of patient satisfaction, survival rates of implants and overdentures, and prosthodontic complications.

The aim of this work is to describe a case of severe disparallelism between two implants supporting a cement-retained bridge, placed in the maxilla, employing two custom-angled abutments. Fractured abutment screw and fractured abutment involved two implant restorations in the maxilla. Once prosthetic components have been removed, a new prosthetic rehabilitation has been planned. The divergence between the implants was measured, obtaining an angle of divergence of 39°. Then, two custom-angled titanium abutments and two metal-ceramic splinted crowns were realized.

Temporomandibular disorders (TMDs) are multi-factorial and polysymptomatic pathologies and their management must be customized for every patient. Numerous therapy techniques are available to treat temporomandibular disorders-related muscular discomfort and persistent orofacial pain. Botulinum toxin (BoNT) has emerged as a popular option for patients with myofascial TMD who do not completely recover from their condition after receiving conservative care and medication. A systematic search of the literature, from January 2000 until 1 April 2022, was performed in the MEDLINE (PubMed), Web of Science, and Lilacs databases. The following search terms combination: (temporomandibular disorders) OR (botulinum) OR (toxin) was employed. A total of 357 articles were initially found in the electronic search. After screening, 11 full-text articles satisfied the inclusion criteria. The Cochrane risk of bias tool (RoB 2) tool, which uses seven domains of bias to assess random sequence generation, allocation concealment, blinding of participants and personnel, blinding of outcome assessment of self-reported outcomes, blinding of outcome assessment of objective measures, incomplete outcome data, selective reporting, and other biases, was employed to analyze randomized controlled trials. The aim of this systematic review of randomized controlled trials is to provide an overview of the use of BoNT for TMDs by comparing the application of BoNT with other therapeutic approaches. BoNT-A could help patients that do not respond to conservative treatments. Low doses are recommended when BoNT-A is considered for persistent orofacial pain related to TMD. Future research should, however, conduct clinical trials with a stricter design. The results of BoNT-A could be confirmed by more randomized controlled trials with larger sample sizes, less bias, and longer follow-up times.

The surgical correction of dento-maxillofacial deformities for aesthetic reasons is increasingly required. In order to obtain the results that our patients expect, it is necessary to very thoroughly evaluate every aesthetic detail of the face, because an optimal result comes from the correction of all parameters. The region of the mandibular angles is very important in determining the final aesthetics but is at the same time difficult to predict. Traditional programming based on model surgery is inadequate in this regard compared to that based on CT (Computed Tomography) reconstruction. The authors explain the reasons for this and demonstrate the problems by reporting a typical clinical case.

Abstract Third molar removal surgery usually comes accompanied by postoperative discomfort, which could be influenced by the surgical approach chosen. This scoping systematic review aimed at compiling the available evidence focused on the influence of flap design, including envelope flap (EF), triangular flap (TF), and modified triangular flap (MTF), on postoperative pain, swelling, and trismus, as primary outcome measures, and any result mentioning healing promotion or delay, as secondary outcome measure, after mandibular third molar extraction surgery. An electronic search, complemented by a manual search, of articles published from 1999 to 2020 was conducted in the Medline (PubMed), EMBASE and Web of Science databases including human randomized controlled trials, prospective, and retrospective studies with at least 15 patients. The risk of bias of the included studies was assessed either with the Cochrane’s Risk of Bias tool or with the Newcastle-Ottawa scale. Every step of the review was performed independently and in duplicate. The initial electronic search recovered 2102 articles. After applying the inclusion criteria, 12 articles were included. For patient’s perceived postoperative pain, TF and MTF frequently reported better results than EF. For swelling, the literature is divided, despite a trend favoring EF. For trismus, data showed that its occurrence is mostly associated with the duration of the surgery rather than with the chosen flap. For healing, the limited data is inconclusive. Finally, randomized studies showed a high risk of bias, whereas nonrandomized studies were mostly of good quality and low risk of bias. Although there was no clear consensus regarding the influence of different flap designs for third mandibular molar extraction on postoperative clinical morbidities; the surgeon’s experience, estimated surgical difficulty, molar position and orientation, and surg ery duration should be considered when choosing among the different flap designs.

The effectiveness of variational methods for restoring images corrupted by Poisson noise strongly depends on the suitable selection of the regularization parameter balancing the effect of the regulation term(s) and the generalized Kullback–Liebler divergence data term. One of the approaches still commonly used today for choosing the parameter is the discrepancy principle proposed by Zanella et al. in a seminal work. It relies on imposing a value of the data term approximately equal to its expected value and works well for mid- and high-count Poisson noise corruptions. However, the series truncation approximation used in the theoretical derivation of the expected value leads to poor performance for low-count Poisson noise. In this paper, we highlight the theoretical limits of the approach and then propose a nearly exact version of it based on Monte Carlo simulation and weighted least-square fitting. Several numerical experiments are presented, proving beyond doubt that in the low-count Poisson regime, the proposed modified, nearly exact discrepancy principle performs far better than the original, approximated one by Zanella et al., whereas it works similarly or slightly better in the mid- and high-count regimes.

Background: A maxillofacial prosthesis, an alternative to surgery for the rehabilitation of patients with facial disabilities (congenital or acquired due to malignant disease or trauma), are meant to replace parts of the face or missing areas of bone and soft tissue and restore oral functions such as swallowing, speech and chewing, with the main goal being to improve the quality of life of the patients. The conventional procedures for maxillofacial prosthesis manufacturing involve several complex steps, are very traumatic for the patient and rely on the skills of the maxillofacial team. Computer-aided design and computer-aided manufacturing have opened a new approach to the fabrication of maxillofacial prostheses. Our review aimed to perform an update on the digital design of a maxillofacial prosthesis, emphasizing the available methods of data acquisition for the extraoral, intraoral and complex defects in the maxillofacial region and assessing the software used for data processing and part design. Methods: A search in the PubMed and Scopus databases was done using the predefined MeSH terms. Results: Partially and complete digital workflows were successfully applied for extraoral and intraoral prosthesis manufacturing. Conclusions: To date, the software and interface used to process and design maxillofacial prostheses are expensive, not typical for this purpose and accessible only to very skilled dental professionals or to computer-aided design (CAD) engineers. As the demand for a digital approach to maxillofacial rehabilitation increases, more support from the software designer or manufacturer will be necessary to create user-friendly and accessible modules similar to those used in dental laboratories.

The outbreak of coronavirus disease 2019 (COVID-19) was identified in Wuhan, China, in December 2019. As of 17 April 2020, more than 2 million cases of COVID-19 have been reported worldwide. Northern Italy is one of the world’s centers of active coronavirus cases. In this study, we predicted the spread of COVID-19 and its burden on hospital care under different conditions of social distancing in Lombardy and Emilia-Romagna, the two regions of Italy most affected by the epidemic. To do this, we used a Susceptible-Exposed-Infectious-Recovered (SEIR) deterministic model, which encompasses compartments relevant to public health interventions such as quarantine. A new compartment L was added to the model for isolated infected population, i.e., individuals tested positives that do not need hospital care. We found that in Lombardy restrictive containment measures should be prolonged at least until early July to avoid a resurgence of hospitalizations; on the other hand, in Emilia-Romagna the number of hospitalized cases could be kept under a reasonable amount with a higher contact rate. Our results suggest that territory-specific forecasts under different scenarios are crucial to enhance or take new containment measures during the epidemic.

As global temperatures warm and populations and incomes rise, the demand for cooling will soar, creating a positive feedback loop between global warming and electricity-related carbon dioxide (CO2) emissions. This study explores the relationship between temperature, electricity, air conditioning (AC) and CO2 emissions, and the sustainability of cooling in the Kingdom of Saudi Arabia. With the highest share of AC in household electricity consumption in the world and its already very hot summers warming by 3 °C in many areas over the last 40 years, Saudi Arabia provides an important case study of how the cooling challenge can be managed. Data from the European Centre for Medium-Range Weather Forecasts (ECMWF ERA5) is used to illustrate local warming trends (1979−2018) and show the relationship between temperature and power generation within a typical year using hourly data (2011−2015). Using annual data (2010−2018), we then show that since 2016 the rapid growth in the Kingdom’s electricity demand for AC and its associated CO2 emissions have plateaued. This suggests energy efficiency measures, higher electricity prices and a shift from the use of oil towards gas in the power sector are having a positive effect on energy sustainability. We identify key policies and technologies that will be important for the sustainable use of cooling in Saudi Arabia and beyond.

The use of reliable indices to evaluate the aesthetic outcomes in the aesthetic area is an important and objective clinical aid to monitor the results over time. According to the literature various indices were proposed to evaluate aesthetic outcomes of implant-prosthetic rehabilitation of the anterior area like Peri-Implant and Crown Index [PICI], Implant Crown Aesthetic Index [ICAI], Pink Esthetic Score/White Esthetic Score [PES/WES], and Pink Esthetic Score [PES] but none of them was related to prosthetic rehabilitation on natural teeth. The aim of this study is to verify the validity of PES/WES index for natural tooth-prosthetic rehabilitation of the anterior area. As secondary objective, we proposed to evaluate the long-term predictability of this clinical application, one of which is presented below, following the analysis of the most currently accepted literature.

Complex periprosthetic cases are considered as challenges by clinicians. Clinical and radiographic parameters should be considered separately to make the right choice between an endodontically or periodontally compromised treated tooth and implant. Therefore, in order to decide whether the tooth is safe or not, data that have to be collected are specific parameters of both the patient and the clinician. In addition, the presence of periodontal, prosthetic, and orthodontic diseases requires patients to be set in multidisciplinary approach. The aim of this case report is to describe how the multidisciplinary approach could be the best way to manage difficult cases of implant-prosthetic rehabilitation. How to rehabilitate with fixed prosthesis on natural teeth and dental implants a smoker patient who presents with active periodontitis, multiple edentulous areas, dental malocclusion, and severe aesthetic problems was also described.

The aim of this paper is to describe a case of implant-prosthetic rehabilitation in a patient with periodontitis, focusing on the different timing of implant placement. After initial periodontal treatment, teeth with advanced mobility degree and severe bone resorption were extracted. At different healing time oral implants were placed in a prosthetic-guided position. After osseointegration period the implants were loaded and the results at one year of follow-up are presented.