Search

This study investigates the potential of ultrasonic baths to enhance mold-assisted electrodeposition for fabricating three-dimensional (3D) microelectrode arrays (MEAs) with improved quality and reliability. Focusing on gold microstructures, commonly employed in 3D MEAs due to their biocompatibility and electrical conductivity, we explore how ultrasonic vibrations impact the electrodeposition process. Through the formation of microscopic bubbles and reactive sites, ultrasonic baths accelerate deposition, offering potential benefits such as increased deposition rates, uniformity, and cost-effectiveness. Our experimental findings demonstrate significant improvements in deposition rate and uniformity, highlighting the potential of ultrasonic baths to advance the fabrication of 3D MEAs for various biomedical applications.

In the pursuit of refining the fabrication of three-dimensional (3D) microelectrode arrays (MEAs), this study investigates the application of ultrasonic vibrations in template-assisted electrodeposition. This was driven by the need to overcome limitations in the deposition rate and the height uniformity of microstructures developed using conventional electrodeposition methods, particularly in the field of in vitro electrophysiological investigations. This study employs a template-assisted electrodeposition approach coupled with ultrasonic vibrations to enhance the deposition process. The method involves utilizing a polymeric hard mask to define the shape of electrodeposited microstructures (i.e., micro-pillars). The results show that the integration of ultrasonic vibrations significantly increases the deposition rate by up to 5 times and substantially improves the uniformity in 3D MEAs. The key conclusion drawn is that ultrasonic-enhanced template-assisted electrodeposition emerges as a powerful technique and enables the development of 3D MEAs at a higher rate and with a superior uniformity. This advancement holds promising implications for the precision of selective electrodeposition applications and signifies a significant stride in developing micro- and nanofabrication methodologies for biomedical applications.

Metal oxide semiconductor (MOS) gas sensors are widely used for gas detection. Typically, the hotplate element is the key component in MOS gas sensors which provide a proper and tunable operation temperature. However, the low power efficiency of the standard hotplates greatly limits the portable application of MOS gas sensors. The miniaturization of the hotplate geometry is one of the most effective methods used to reduce its power consumption. In this work, a new method is presented, combining electron beam lithography (EBL) and focused ion beam (FIB) technologies to obtain low power consumption. EBL is used to define the low-resolution section of the electrode, and FIB technology is utilized to pattern the high-resolution part. Different Au++ ion fluences in FIBs are tested in different milling strategies. The resulting devices are characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), and secondary ion mass spectrometry (SIMS). Furthermore, the electrical resistance of the hotplate is measured at different voltages, and the operational temperature is calculated based on the Pt temperature coefficient of resistance value. In addition, the thermal heater and electrical stability is studied at different temperatures for 110 h. Finally, the implementation of the fabricated hotplate in ZnO gas sensors is investigated using ethanol at 250 °C.

Hazardous substances produced by anthropic activities threaten human health and the green environment. Gas sensors, especially those based on metal oxides, are widely used to monitor toxic gases with low cost and efficient performance. In this study, electron beam lithography with two-step exposure was used to minimize the geometries of the gas sensor hotplate to a submicron size in order to reduce the power consumption, reaching 100 °C with 0.09 W. The sensing capabilities of the ZnO nanofilm against NO2 were optimized by introducing an enrichment of oxygen vacancies through N2 calcination at 650 °C. The presence of oxygen vacancies was proven using EDX and XPS. It was found that oxygen vacancies did not significantly change the crystallographic structure of ZnO, but they significantly improved the electrical conductivity and sensing behaviors of ZnO film toward 5 ppm of dry air.

Recent years have witnessed a growing interest in detectors capable of detecting single photons in the near-infrared (NIR), mainly due to the emergence of new applications such as light detection and ranging (LiDAR) for, e.g., autonomous driving. A silicon single-photon avalanche diode is surely one of the most interesting and available technologies, although it yields a low efficiency due to the low absorption coefficient of Si in the NIR. Here, we aim at overcoming this limitation through the integration of complementary metal–oxide–semiconductor (CMOS) -compatible nanostructures on silicon photodetectors. Specifically, we utilize silver grating arrays supporting surface plasmons polaritons (SPPs) to superficially confine the incoming NIR photons and therefore to increase the probability of photons generating an electron-hole pair. First, the plasmonic silver array is geometrically designed using time domain simulation software to achieve maximum detector performance at 950 nm. Then, a plasmonic silver array characterized by a pitch of 535 nm, a dot width of 428 nm, and a metal thickness of 110 nm is integrated by means of the focused ion beam technique on the detector. Finally, the integrated detector is electro-optically characterized, demonstrating a QE of 13% at 950 nm, 2.2 times higher than the reference. This result suggests the realization of a silicon device capable of detecting single NIR photons, at a low cost and with compatibility with standard CMOS technology platforms.

Electrochemical sensors are devices capable of detecting molecules and biomolecules in solutions and determining the concentration through direct electrical measurements. These systems can be miniaturized to a size less than 1 µm through the creation of small-size arrays of nanoelectrodes (NEA), offering advantages in terms of increased sensitivity and compactness. In this work, we present the fabrication of an electrochemical platform based on an array of nanoelectrodes (NEA) and its possible use for the detection of antigens of interest. NEAs were fabricated by forming arrays of nanoholes on a thin film of polycarbonate (PC) deposited on boron-doped diamond (BDD) macroelectrodes by thermal nanoimprint lithography (TNIL), which demonstrated to be a highly reliable and reproducible process. As proof of principle, gliadin protein fragments were physisorbed on the polycarbonate surface of NEAs and detected by immuno-indirect assay using a secondary antibody labelled with horseradish peroxidase (HRP). This method allows a successful detection of gliadin, in the range of concentration of 0.5–10 μg/mL, by cyclic voltammetry taking advantage from the properties of NEAs to strongly suppress the capacitive background signal. We demonstrate that the characteristics of the TNIL technology in the fabrication of high-resolution nanostructures together with their low-cost production, may allow to scale up the production of NEAs-based electrochemical sensing platform to monitor biochemical molecules for both food and biomedical applications.

In this article, we highlight that the interaction potential confining Dirac particles in a box must be invariant under the charge conjugation to avoid the Klein paradox, in which an infinite number of negative-energy particles are excited. Furthermore, we derive the quantization rules for a relativistic particle in a cylindrical box, which emulates the volume occupied by a beam of particles with a non-trivial aspect ratio. We apply our results to the evaluation of the quantum limit for emittance in particle accelerators. The developed theory allows the description of quantum beams carrying Orbital Angular Momentum (OAM). We demonstrate how the degeneracy pressure is such to increase the phase–space area of Dirac particles carrying OAM. The results dramatically differ from the classical evaluation of phase–space areas, that would foresee no increase in emittance for beams in a coherent state of OAM. We discuss the quantization of the phase–space cell’s area for single Dirac particles carrying OAM, and, finally, provide an interpretation of the beam entropy as the measure of how much the phase–space area occupied by the beam deviates from its quantum limit.

Abstract Light‐based 3D printing techniques represent powerful tools, enabling the precise fabrication of intricate objects with high resolution and control. An innovative addition to this set of printing techniques is Optical Fiber‐Assisted Printing (OFAP) introduced in this article. OFAP is a platform utilizing an LED‐coupled optical fiber (LOF) that selectively crosslinks photopolymer resins. It allows change of parameters like light intensity and LOF velocity during fabrication, facilitating the creation of structures with progressive features and multi‐material constructs layer‐by‐layer. An optimized formulation based on allyl‐modified gelatin (gelAGE) with food dyes as photoabsorbers is introduced. Additionally, a novel gelatin‐based biomaterial, alkyne‐modified gelatin (gelGPE), featuring alkyne moieties, demonstrates near‐visible light absorption thus fitting OFAP needs, paving the way for multifunctional hydrogels through thiol‐yne click chemistry. Besides 2D patterning, OFAP is transferred to embedded 3D printing within a resin bath demonstrating the proof‐of‐concept as a novel printing technology with potential applications in tissue engineering and biomimetic scaffold fabrication, offering rapid and precise freeform printing capabilities.

Abstract Anterior Visual Pathway (aVP) damage may be linked to diverse inflammatory, degenerative and/or vascular conditions. Currently however, a standardized methodological framework for extracting MRI biomarkers of the aVP is not available. We used high-resolution, 3-D MRI data to generate a probabilistic anatomical atlas of the normal aVP and its intraorbital (iOrb), intracanalicular (iCan), intracranial (iCran), optic chiasm (OC), and tract (OT) subdivisions. We acquired 0.6 mm3 steady-state free-precession images from 24 healthy participants using a 3 T scanner. aVP masks were obtained by manual segmentation of each aVP subdivision. Mask straightening and normalization with cross-sectional area (CSA) preservation were obtained using scripts developed in-house. A probabilistic atlas (“aVP-24”) was generated by averaging left and right sides of all subjects. Leave-one-out cross-validation with respect to interindividual variability was performed employing the Dice Similarity Index (DSI). Spatially normalized representations of the aVP subdivisions were generated. Overlapping CSA values before and after normalization demonstrate preservation of the aVP cross-section. Volume, length, CSA, and ellipticity index (ε) biometrics were extracted. The aVP-24 morphology followed previous descriptions from the gross anatomy. Atlas spatial validation DSI scores of 0.85 in 50% and 0.77 in 95% of participants indicated good generalizability across the subjects. The proposed MRI standardization framework allows for previously unavailable, geometrically unbiased biometric data of the entire aVP and provides the base for future spatial-resolved, group-level investigations.

Abstract X-ray sources have a strong social impact, being implemented for biomedical research, material and environmental sciences. Nowadays, compact and accessible sources are made using lasers. We report evidence of nontrivial spectral-angular correlations in a laser-driven betatron X-ray source. Furthermore, by angularly-resolved spectral measurements, we detect the signature of spatial phase modulations by the electron trajectories. This allows the lateral coherence function to be retrieved, leading to the evaluation of the coherence area of the source, determining its brightness. Finally, the proposed methodology allows the unprecedented reconstruction of the size of the X-ray source and the electron beam emittance in the two main emission planes in a single shot. This information will be of fundamental interest for user applications of new radiation sources.

The study addresses the challenge of temperature sensitivity in pristine gelatin hydrogels, widely used in biomedical applications due to their biocompatibility, low cost, and cell adhesion properties. Traditional gelatin hydrogels dissolve at physiological temperatures, limiting their utility. Here, we introduce a novel method for creating stable hydrogels at 37 °C using pristine gelatin through photopolymerization without requiring chemical modifications. This approach enhances consistency and simplifies production and functionalization of the gelatin with bioactive molecules. The stabilization mechanism involves the partial retention of the triple-helix structure of gelatin below 25 °C, which provides specific crosslinking sites. Upon activation by visible light, ruthenium (Ru) acts as a photosensitizer that generates sulphate radicals from sodium persulphate (SPS), inducing covalent bonding between tyrosine residues and “locking” the triple-helix conformation. The primary focus of this work is the characterization of the mechanical properties, swelling ratio, and biocompatibility of the photopolymerized gelatin hydrogels. Notably, these hydrogels supported better cell viability and elongation in normal human dermal fibroblasts (NHDFs) compared to GelMA, and similar performance was observed for human pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs). As a proof of concept for functionalization, gelatin was modified with selenous acid (GelSe), which demonstrated antioxidant and antimicrobial capacities, particularly against E. coli and S. aureus. These results suggest that pristine gelatin hydrogels, enhanced through this new photopolymerization method and functionalized with bioactive molecules, hold potential for advancing regenerative medicine and tissue engineering by providing robust, biocompatible scaffolds for cell culture and therapeutic applications.

An overview of the 200 TW Frascati Laser for Acceleration and Multidisciplinary Experiments (FLAME) at the SPARC_LAB Test Facility at the National Laboratories of Frascati (LNF-INFN) is presented. The FLAME laser is employed to investigate different laser–matter interaction schemes, i.e., electron acceleration and secondary radiation sources through Laser Wakefield Acceleration (LWFA) or ion and proton generation through Target Normal Sheath Acceleration (TNSA), for a wide range of scientific areas including the biomedical applications. Finally, recently performed experimental campaigns within the EuAPS and EuPRAXIA frameworks are reported.

The EuPRAXIA EU project is at the forefront of advancing particle accelerator research and the development of photon sources through innovative plasma acceleration approaches. Within this framework, the EuAPS project aims to exploit laser wakefield acceleration to build and operate a betatron radiation source at the INFN Frascati National Laboratory. The EuAPS source will provide femtosecond X-ray pulses in the spectral region between about 1 and 10 keV, unlocking a realm of experimental ultrafast methodologies encompassing diverse imaging and X-ray spectroscopy techniques. This paper presents a description of the EuAPS betatron source, including simulations of the photon beam parameters, outlines the preliminary design of the dedicated photon beamline, and provides an insightful overview of its photon science applications.

Takotsubo syndrome (TTS) is characterized by a transient left ventricular systolic dysfunction, burdened by significant acute and long-term mortality and morbidity. The prognosis of TTS, especially in the long-term, is influenced by both non-cardiovascular (non-CV) and CV comorbidities, among which cancer is one of the most common. The presence of a malignancy is proven to be associated with higher mortality in TTS. Moreover, a number of anticancer treatments has been reported to possibly cause TTS as a form of cardiotoxicity, even though clearcut associations are lacking. The aim of this narrative review is to sum up contemporary knowledge on the association of cancer and TTS, addressing unmet needs and practical implications. The importance of a close collaboration between cardiologists and oncologists is herein highlighted, both to allow an adequate management of the acute TTS phase, and to actively and safely return to the oncologic management once the acute setting is resolved.

X-ray production through betatron radiation emission from electron bunches is a valuable resource for several research fields. The EuAPS (EuPRAXIA Advanced Photon Sources) project, within the framework of EuPRAXIA, aims to provide 1–10 keV photons (X-rays), developing a compact plasma-based system designed to exploit self-injection processes that occur in the highly nonlinear laser-plasma interaction (LWFA) to drive electron betatron oscillations. Since the emitted radiation spectrum, intensity, angular divergence, and possible coherence strongly depend on the properties of the self-injected beam, accurate preliminary simulations of the process are necessary to evaluate the optimal diagnostic device specifications and to provide an initial estimate of the source’s performance. A dedicated tool for these tasks has been developed; electron trajectories from particle-in-cell (PIC) simulations are currently undergoing numerical analysis through the calculation of retarded fields and spectra for various plasma and laser parameter combinations. The implemented forward approach evaluation of the fields could allow for the integration of the presented scheme into already existing PIC codes. The spectrum calculation is thus performed in detector time, giving a linear complex exponential phase; this feature allows for a semi-analitical Fourier transform evaluation. The code structure and some trajectories analysis results are presented.

Pilocytic astrocytoma is a WHO grade I tumor usually diagnosed in pediatric patients, and rarely encountered in the adult population. Therefore, available information about the magnetic resonance imaging characteristics of adult pilocytic astrocytoma is scarce. We report on the MRI features and corresponding histopathologic findings of six consecutive aPA cases diagnosed. The tumors were encountered in both infra- and supratentorial compartments, and their MRI characteristics were quite heterogeneous. Features included the typical solid-cystic appearance located in the cerebellum as well as the relatively unusual multifocal and/or hemorrhagic features located intra-ventricularly. The aPA MRI characteristics are remarkably variable, and might mimic those of higher grade tumors in adult patients.

Cerebral peri-aneurysmal edema (PE) is typically associated with giant partially-thrombosed aneurysms and less frequently with smaller aneurysms treated with endovascular embolization. An understanding of the pathophysiologic mechanism of PE is still limited. We report 3 cases of cerebral aneurysms associated with PE. We describe 2 cases of giant partially thrombosed aneurysms surrounded by vasogenic edema with apposition of an intramural and juxtamural thrombus. Our third case is a smaller aneurysm inciting vasogenic edema several years after coil embolization. Vessel-wall magnetic resonance imaging (MRI) showed avid wall enhancement and an enhancing thrombus embedded within the coils, reflecting inflammation of the aneurysm wall and proliferation of the vasa vasorum. Thrombosis within the aneurysmal sac and walls, both in native and treated aneurysms, may promote inflammatory changes and sustain the occurrence of PE. Vessel-wall MRI has a potential role in the evaluation process of this subgroup of aneurysms.

Introduction Discogenic pain is the cause of pain in 26%–40% of patients with for low back pain. Consensus about treatment of chronic discogenic low back pain is lacking and most treatment alternatives are supported by limited evidence. The percutaneous implantation of hydrogels into the nucleus pulposus represents a promising regenerative intradiscal therapy. The hydrogel ‘GelStix’ is composed primarily of hydrolyzed polyacrylonitrile and acts as a reservoir of hydration, producing increased pressure and improved pH balance, potentially leading to disc preservation. We hypothesise that treatment with GelStix will lead to greater reduction in pain intensity at 6 months post-treatment compared with patients receiving sham treatment.Methods and analysis This is a parallel group, randomised sham-controlled double-blind, multicentre trial to assess whether the GelStix device is superior to sham in reducing pain intensity in patients with chronic discogenic low back pain. The study will be conducted in two regional hospitals in Europe. Seventy-two participants will be randomised in a 1:1 ratio. The primary outcome will be the change in pain intensity between preoperative baseline and at 6 months postintervention. Secondary outcomes were disability, quality of life, the patient’s global impression of change scale, the use of pain medication and the disc degeneration process assessed by means of MRI. For change in pain intensity, disability, health-related quality of life and disc height, mean values will be compared between groups using linear regression analysis, adjusted for treatment centre.Ethics and dissemination Ethics approval was obtained from the Ethics Committee of the Canton Ticino, Switzerland (CE2982) and by the Medical Ethical Committee Arnhem-Nijmegen, the Netherlands (2016-2944). All patients that agree to participate will be asked to sign an informed consent form. Results will be disseminated through international publications in peer-reviewed journals, in addition to international conference presentations.Trial registration number NCT02763956.Protocol version 7.1, 18 November 2020.

We present an analysis of the performance of a broadband secondary radiation source based on a high-gradient laser-plasma wakefield electron accelerator. In more detail, we report studies of compact and ultra-short X-ray generation via betatron oscillations in plasma channels. For the specific working point examined in this paper, determined by the needs of other experiments ongoing at the facility, at ∼0.02 Hz operation rate, we have found ≲106 photons emitted per shot (with a fluctuation of 50%) in the soft X-rays, corresponding to a critical energy of ∼0.8 keV (with a fluctuation of 40%). The source will be implemented for experiments in time-domain spectroscopy, e.g., biological specimens, and for other applications oriented to medical physics.

Vertebral augmentation has been used to treat painful vertebral compression fractures and metastatic lesions in millions of patients around the world. An international group of subject matter experts have considered the evidence, including but not limited to mortality. These considerations led them to ask whether it is appropriate to allow the subjective measure of pain to so dominate the clinical decision of whether to proceed with augmentation. The discussions that ensued are related below.

Migraine is particularly common in patients with multiple sclerosis (MS) and has been linked to the dysfunction of the brain circuitry modulating the peripheral nociceptive stimuli. Using MRI, we explored whether changes in the resting state-functional connectivity (RS-FC) may characterize the occurrence of migraine in patients with MS. The RS-FC characteristics in concerned brain regions were explored in 20 MS patients with migraine (MS+M) during the interictal phase, and compared with 19 MS patients without migraine (MS-M), which served as a control group. Functional differences were correlated to the frequency and severity of previous migraine attacks, and with the resulting impact on daily activities. In MS+M, the loss of periaqueductal gray matter (PAG) positive connectivity with the default mode network and the left posterior cranial pons was associated with an increase of migraine attacks frequency. In contrast, the loss of PAG negative connectivity with sensorimotor and visual network was linked to migraine symptom severity and related daily activities impact. Finally, a PAG negative connection was established with the prefrontal executive control network. Migraine in MS+M patients and its impact on daily activities, underlies RS-FC rearrangements between brain regions involved in pain perception and modulation.

EuPRAXIA is a leading European project aimed at the development of a dedicated, ground-breaking, ultra-compact accelerator research infrastructure based on novel plasma acceleration concepts and laser technology and on the development of their users’ communities. Within this framework, the Laboratori Nazionali di Frascati (LNF, INFN) will be equipped with a unique combination of an X-band RF LINAC generating high-brightness GeV-range electron beams, a 0.5 PW class laser system and the first fifth-generation free electron laser (FEL) source driven by a plasma-based accelerator, the EuPRAXIA@SPARC_LAB facility. Wiggler-like radiation emitted by electrons accelerated in plasma wakefields gives rise to brilliant, ultra-short X-ray pulses, called betatron radiation. Extensive studies have been performed at the FLAME laser facility at LNF, INFN, where betatron radiation was measured and characterized. The purpose of this paper is to describe the betatron spectrum emitted by particle wakefield acceleration at EuPRAXIA@SPARC_LAB and provide an overview of the foreseen applications of this specific source, thus helping to establish a future user community interested in (possibly coupled) FEL and betatron radiation experiments. In order to provide a quantitative estimate of the expected betatron spectrum and therefore to present suitable applications, we performed simple simulations to determine the spectrum of the betatron radiation emitted at EuPRAXIA@SPARC_LAB. With reference to experiments performed exploiting similar betatron sources, we highlight the opportunities offered by its brilliant femtosecond pulses for ultra-fast X-ray spectroscopy and imaging measurements, but also as an ancillary tool for designing and testing FEL instrumentation and experiments.

Vertebral compression fractures are one of the most relevant clinical consequences caused by osteoporosis: one of the most common treatment for such fractures is vertebral augmentation through minimally invasive approaches (vertebroplasty or balloon-kyphoplasty). Unfortunately, these techniques still present drawbacks, such as re-fractures of the treated vertebral body with subsidence of the non-augmented portions or re-fracture of the non-augmented middle column at the junction with the augmented anterior column. A novel minimally-invasive augmentation technique, called Stent-Screw Assisted Internal Fixation, has been recently proposed for the treatment of severe osteoporotic and neoplastic fractures: this technique uses two vertebral body stents and percutaneous cannulated and fenestrated pedicular screws, through which cement is injected inside the expanded stents to achieve optimal stents' and vertebral body's filling. The role of the pedicle screws is to anchor the stents-cement complex to the posterior column, acting as a bridge across the middle column and preserving its integrity from possible collapse. In order to evaluate the potential of the new technique in restoring the load bearing capacity of the anterior and middle spinal columns and in reducing bone strains, a Finite Element model of an osteoporotic lumbar spine has been developed. Both standard vertebroplasty and Stent-Screw Assisted Internal Fixation have been simulated: simulations have been run taking into account everyday activities (standing and flexion) and comparison between the two techniques, in terms of strain distribution on vertebral endplates and posterior and anterior wall, was performed. Results show that Stent-Screw Assisted Internal Fixation significantly decrease the strain distribution on the superior EP and the cortical wall compared to vertebroplasty, possibly reducing the re-fracture risk of the middle-column at the treated level.

The terahertz response of topological insulator surface states, in which relativistic electrons are protected from backscattering, possesses potential optic and plasmonic applications. Here, the authors demonstrate a nonlinear absorption response of Bi2Se3to terahertz electric fields.

We present a circuit design composed of two Josephson junctions coupled by a nonreciprocal element, the gyrator, whose ground space is doubly degenerate. The ground states are approximate code words of the Gottesman-Kitaev-Preskill code. We determine the low-energy dynamics of the circuit by working out the equivalence of this system to the problem of a single electron in a crystal, confined to a two-dimensional plane, and subjected to a strong, homogeneous magnetic field. We find that the circuit is naturally protected against the common noise channels in superconducting circuits, such as charge and flux noise, implying that it can be used for passive quantum error correction. We also propose realistic design parameters for an experimental realization, and we describe possible protocols to perform logical one- and two-qubit gates, state preparation, and readout.

Ultra-short electron bunches, such as those delivered by a high-brightness photo-injector, are suitable to produce high peak power THz radiation, both broad and narrow band, with sub-picosecond down to femtosecond pulse shaping. The features of this kind of source in the THz range of the electromagnetic spectrum are extremely appealing for frequency- and time-domain experiments in a wide variety of fields. The present manuscript will overview the method of generation and characterization of THz radiation produced by high-brightness electron beams, as those available at the SPARC_LAB test facility.

Background and Objectives: We describe a novel technique for percutaneous tumor debulking and cavity creation in patients with extensive lytic lesions of the vertebral body including posterior wall dehiscence prior to vertebral augmentation (VA) procedures. The mechanical cavity is created with a combination of curettage and vacuum suction (Q-VAC). Balloon kyphoplasty and vertebral body stenting are used to treat neoplastic vertebral lesions and might reduce the rate of cement leakage, especially in presence of posterior wall dehiscence. However, these techniques could theoretically lead to increased intravertebral pressure during balloon inflation with possible mobilization of soft tissue tumor through the posterior wall, aggravation of spinal stenosis, and resultant complications. Creation of a void or cavity prior to balloon expansion and/or cement injection would potentially reduce these risks. Materials and Methods: A curette is coaxially inserted in the vertebral body via transpedicular access trocars. The intravertebral neoplastic soft tissue is fragmented by multiple rotational and translational movements. Subsequently, vacuum aspiration is applied via one of two 10 G cannulas that had been introduced directly into the fragmented lesion, while saline is passively flushed via the contralateral cannula, with lavage of the fragmented solid and fluid-necrotic tumor parts. Results: We applied the Q-VAC technique to 35 cases of thoracic and lumbar extreme osteolysis with epidural mass before vertebral body stenting (VBS) cement augmentation. We observed extravertebral cement leakage on postoperative CT in 34% of cases, but with no clinical consequences. No patients experienced periprocedural respiratory problems or new or worsening neurological deficit. Conclusion: The Q-VAC technique, combining mechanical curettage and vacuum suction, is a safe, inexpensive, and reliable method for percutaneous intravertebral tumor debulking and cavitation prior to VA. We propose the Q-VAC technique for cases with extensive neoplastic osteolysis, especially if cortical boundaries of the posterior wall are dehiscent and an epidural soft tissue mass is present.

Following the promising results obtained at the SPARC_LAB test-facility in Frascati (Italy), we have recently submitted a proposal to develop a new facility driven by a plasma accelerator module for extended and user-oriented applications. The new multi-disciplinary user-facility will be equipped with a soft X-ray Free Electron Laser (FEL) operating with energies larger than 1 GeV. This design study is performed to be fully compatible with the EuPRAXIA design study. Here, the latest layout and beam parameters are presented.

A proposal for building a Free Electron Laser, EuPRAXIA@SPARC_LAB, at the Laboratori Nazionali di Frascati, is at present under consideration. This FEL facility will provide a unique combination of a high brightness GeV-range electron beam generated in a X-band RF linac, a 0.5 PW-class laser system and the first FEL source driven by a plasma accelerator. The FEL will produce ultra-bright pulses, with up to 10 12 photons/pulse, femtosecond timescale and wavelength down to 3 nm, which lies in the so called “water window”. The experimental activity will be focused on the realization of a plasma driven short wavelength FEL able to provide high-quality photons for a user beamline. In this paper, we describe the main classes of experiments that will be performed at the facility, including coherent diffraction imaging, soft X-ray absorption spectroscopy, Raman spectroscopy, Resonant Inelastic X-ray Scattering and photofragmentation measurements. These techniques will allow studying a variety of samples, both biological and inorganic, providing information about their structure and dynamical behavior. In this context, the possibility of inducing changes in samples via pump pulses leading to the stimulation of chemical reactions or the generation of coherent excitations would tremendously benefit from pulses in the soft X-ray region. High power synchronized optical lasers and a TeraHertz radiation source will indeed be made available for THz and pump–probe experiments and a split-and-delay station will allow performing XUV-XUV pump–probe experiments.

Nowadays, plasma wakefield acceleration is the most promising acceleration technique for compact and cheap accelerators, needed in several fields, e.g., novel compact light sources for industrial and medical applications. Indeed, the high electric field available in plasma structures (>100 GV/m) allows for accelerating electrons at the GeV energy scale in a few centimeters. Nevertheless, this approach still suffers from shot-to-shot instabilities, mostly related to experimental parameter fluctuations, e.g., laser intensity and plasma density. Therefore, single shot diagnostics are crucial in order to properly understand the acceleration mechanism. In this regard, at the SPARC_LAB Test Facility, we have developed two diagnostic tools to investigate properties of electrons coming from high intensity laser–matter interaction: one relying on Electro Optical Sampling (EOS) for the measurement of the temporal profile of the electric field carried by fast electrons generated by a high intensity laser hitting a solid target, the other one based on Optical Transition Radiation (OTR) for single shot measurements of the transverse emittance. In this work, the basic principles of both diagnostics will be presented as well as the experimental results achieved by means of the SPARC high brightness photo-injector and the high power laser FLAME.

The ultra-short electron beams, produced through the velocity bunching compression technique at the SPARC_LAB test Facility (Frascati, Italy), are used to produce Coherent Transition Radiation in the terahertz (THz) range. This paper reports on the main features of this THz source, which have a spectral coverage up to 5 THz, a pulse duration down to 100 fs, and an energy per pulse on the order of tens of μJ. These figures of merits open the possibility to apply this source for nonlinear and THz pump-probe experiments in Solid-State Physics and material science.