Search

The study investigated the extent to which electronic voting is accessible to Dutch voters, especially the visually impaired, those with low literacy, and the elderly. Together with the different user groups, a series of electronic interfaces were developed and simulations of a vote-printer were built to run tests on large numbers of participants. The interface consisted of a card reader, a touchscreen and a printer; audio support was available via a headset. For participants with disabilities, the independent variables were visual impairment and low literacy. For elderly participants, the independent variable was age. All participants were asked to make specific choices on the screen and to check the printed result for their choice. As reference, they were asked to vote using the current Dutch ballot paper/red pencil system. The criteria used to determine the accessibility of both systems was: does the printed ballot match the intended vote? The vote-printer significantly increased independent voting by the visually impaired, however this was not seen for the low-literacy group. For the elderly, the use of a vote-printer with electronic interface is equally as accessible as the current paper ballot. All three groups reported using a vote-printer with electronic interface to be easier than the current paper ballot. The study confirmed that co-creating with intended users in the early conceptualization phase is key.

Non-pharmacological interventions have been applied to manage Behavioural and Psychological Symptoms of Dementia (BPSD). However, these interventions have not been assessed from an ergonomics perspective. Ergonomics has investigated the age-related capability changes in terms of sensory, cognition and movement aspects. This study aims to review the existing non-pharmacological interventions for BPSD targeting nursing home residents and generate design recommendations based on the domain of ergonomics in ageing. The electronic databases MEDLINE, EMBASE, PsycINFO were searched for studies which applied non-pharmacological interventions for treating BPSD in nursing home residents. A total of 67 studies met the inclusion criteria; from which 16 types of interventions were identified. Within these intervention types, the main capabilities required from the interventions for People with Dementia (PwD) were identified. The interventions were then categorized into sensory-, cognition-, and movement-oriented according to the main capabilities. Design recommendations were then generated for the interventions with knowledge from the domain of ergonomics in ageing.

Obesity is a growing issue in western societies with consequences for the field of human centered design. Most anthropometric data sources assume the data follow the Gaussian distribution, with population data symmetrically distributed above and below the mean value. This assumption is often true in length measurements like body heights, but may not be true for measurements more sensitive to body mass, like body weight, hip width, elbow-to-elbow width, and body depth. While length measurements have remained relatively stable over time in western societies, mass related measurements are increasing. The authors have experience in providing data via an interactive website DINED, which seeks to make anthropometry accessible without requiring expert knowledge about anatomy and statistics. Currently all DINED dimensions are assumed Gaussian, including those related to body mass. This might not work when designing for plus size people. Future additions in DINED will be about design for obesity and about how to implement 3D scanning into the design process in order to redress these defects.

This paper presents an embarking and disembarking process for the hyperloop, a future high-speed transportation of passengers and goods in tubes. A concept of the (dis)embarking process has been designed and tested with two experiments. The first experiment was performed to compare the new concept to one that is more similar to the current embarking setup of trains on the aspects of efficiency and experience. Participants were asked to (dis)embark in the test settings that simulate the new concept and the conventional situation with luggage. As a result, new passenger flow saves 40% of the time for vehicles to stay on the platform. Follow-up questionnaires and interviews with the participants show that the proposed passenger flow gives a better experience in terms of efficiency, seamlessness and friendliness. The new solution increases the number of doors, which increases the manufacturing complexity and the chance of failure. Narrowing the door size minimizes this effect. Subsequently, a second experiment has been carried out to study the influence of door width on (dis)embarking efficiency and passenger experience following a similar method. It turns out that narrowing the door width does not noticeably influence the embarking time, but the disembarking time does increase. Interviews show that half of the participants sense a negative experience with narrower doors, while the other half do not notice a difference.

The role of no Blame Culture

International audience; BACKGROUND Lumbar disc-related disorders are a main cause of work-related osteo-articular morbidity. Lumbar disc surgery (LDS) has been chosen as sentinel event for the epidemiological surveillance of these disorders since LDS can be identified in the medical databases from public and private hospitals. OBJECTIVE To assess the theoretical impact of workplace-based primary interventions designed to reduce exposure to personal and/or work-related risk factors for LDS. METHODS Cases of LDS were assessed using hospital discharge records for persons aged 20-64 in 2007-8 in the French Pays de la Loire region. We estimated the number of work-related cases of LDS (WR-LDS) in high-risk industry sectors. Three theoretical scenarios of workplace-based primary prevention have been simulated a mono-component work-centered intervention reducing the incidence of WR-LDS by 10%, and two multicomponent global interventions reducing the incidence of all cases of LDS by 5% and 10% by targeting personal and occupational risk factors. RESULTS Four high-risk sectors were identified, amounting to 277 [216-352] cases, of which 98 [37-175] were WR-LDS construction and information and communication for men; wholesale and retail trade and accommodation and food service activities for women. AFE was limited for each industry sector, 30%, 50%, 33% and 55%, respectively. CONCLUSIONS Prevention scenarios combining actions on personal and occupational risk factors would be the most effective, compared to prevention focused only on occupational risk factors. Implementing actions of promotion of health at work would be necessary in addition of actions on occupational risks.

International audience; This article aims to present the activity as an interface amongst different actors in a project process. As based on the ergonomic intervention in a university restaurant, the kitchen assistants’ activity at the meal serving counter is presented as an interface among nutritionists, managers and operators of this food supply system. Building this interface in the re-evaluation meetings of this project aimed to support the dialog amongst heterogeneous actors, thus allowing for the transformation of this system and the improvement of the work conditions for the kitchen assistants.

The synergies and the relevant interdisciplinary existing between Sustainability and Ergonomics (HFE) are paramount to document the cultural evolution of design interventions that can be made when creating innovative artefacts, such as products, services, and product-service systems, since both disciplines aim at investigating the interactions between humans and living ecosystems. However, studies linking Sustainability and HFE mainly tackle the problems at the macro-scales, though several interplays between human behaviours, creative practices, and contexts of use can be identified at the micro-scales within the Human Centred Design domain (HCD). Ergonomic interventions performed under the Sustainability domain should employ design-driven strategies, which means that there is the need to further investigate the interdisciplinary contributions under a HCD lens (e.g.: investigations made at the human dimension). A research agenda for future explorations on Sustainable HCD is proposed in this work. The agenda is composed by six main research themes that employ design-driven scenarios to frame the complex set of open research topics pointed out by HFE in relation to Sustainability goals. Results achieved in this study set a body of knowledge through which systematically explore the possible contributions that Sustainable HCD may produce at all design scales, and for which a choral research effort is needed of all HFE community.

The most successful human societies are those that have found better ways to promote cooperative behaviour. Yet, cooperation is individually costly and, therefore, it often breaks down, leading to enormous social costs. In this article, I review the literature on the mechanisms and interventions that are known to promote cooperative behaviour in social dilemmas. In iterated or non-anonymous interactions, I focus on the five rules of cooperation, as well as on structural changes, involving the cost or the benefit of cooperation, or the size of the interacting group. In one-shot and anonymous interactions, I focus on the role of internalised social heuristics as well as moral preferences for doing the right thing. For each account, I summarize the available experimental evidence. I hope that this review can be helpful for social scientists working on cooperation and for leaders and policy makers who aim at promoting social cooperation or teamwork.

International audience; Based on a research led in the waste sorting and recycling sector in France, we propose to reflect upon the territorial anchorage of the work activities for household waste. In this article, we will argue that the territory is a determinant of work, forgotten by the commercial and industrial logics that organize waste sorting and structure the design of work systems. We will also place the territory as a scale of action for occupational risks prevention that conducts to involve internal actors from the waste sorting centers and external actors from the territory.

In the past 20 years, cardiovascular mortality has decreased in high-income countries in response to the adoption of preventive measures to reduce the burden of coronary artery disease and heart failure. Despite these encouraging results, cardiovascular diseases are responsible for approximately 17 million deaths every year in the world, approximately 25% of which are sudden cardiac death. The risk of sudden cardiac death is higher in men than in women, and it increases with age due to the higher prevalence of coronary artery disease in older age. Accordingly, the sudden cardiac death rate is estimated to range from 1.40 per 100 000 person-years in women to 6.68 per 100 000 person-years in men. Sudden cardiac death in younger individuals has an estimated incidence of 0.46–3.7 events per 100 000 person-years, corresponding to a rough estimate of 1100–9000 deaths in Europe and 800–6200 deaths in the USA every year. Cardiac diseases associated with sudden cardiac death differ in young vs. older individuals. In the young there is a predominance of channelopathies and cardiomyopathies, myocarditis and substance abuse, while in older populations, chronic degenerative diseases predominate. In younger persons, the cause of sudden cardiac death may be elusive even after autopsy, because conditions such as inherited channelopathies or drug-induced arrhythmias that are devoid of structural abnormalities are epidemiologically relevant in this age group. Identification of the cause of an unexpected death provides the family with partial understanding and rationalization of the unexpected tragedy, which facilitates the coping process and allows an understanding of whether the risk of sudden death may extend to family members. Accordingly, author present their experience with autopsies of unexplained sudden death young victims in which a cardiac origin was suspected and the relevance of a standardized protocol for heart examination and histological sampling, as well as for toxicology and molecular investigation.

Tractor overturn is the main cause of injuries and fatal accidents in agriculture. Rollover Protective Structures (ROPS) showed to be effective in reducing fatalities during tractor overturn. Foldable ROPS (FROPS) have been developed to offer greater mobility when working in low overhead clearance zones and more storage options. However, many fatalities and serious injuries in tractor overturn accidents occur for a misuse of the FROPS. The study proposed a multidimensional ergonomic investigation of FROPS handling to identify criticalities in the human-machine interaction which prevent farmers from raising the roll-bar. An observation of users’ behaviors while operating the FROPS and a collection of subjective ratings about perceived effort were performed, considering also tractor objective features. Eleven operators and nine tractors were involved in the study. The results showed that the participants exposed themselves to different safety (e.g. falls) and health (e.g. biomechanical overload of the spine) risks when raising the FROPS, even though they did not perceive any intense effort in handling the roll-bar. The vertical distance between the FROPS pivot pin and the ground affected participants’ gestures and postures. To facilitate the actual use of the FROPS and to prevent injuries or fatal consequences in case of tractor overturn, some technical solutions to enhance the accessibility of the FROPS may be developed. Furthermore, the correct postures and gestures to handle the roll-bar should be addressed during safety and health training courses.

Biomechanical overload represents one of the main risks in the industrial environment and the main possible source of musculoskeletal disorders and diseases. The aim of the this study is to introduce new technologies for quantitative risk assessment of biomechanical overload, by integrating surface electromyography (sEMG) with an innovative motion-capture system based on inertial measurement units (IMU). The case study was carried out in collaboration with Fiat Chrysler Automobiles Italy S.p.A. and deals with the analysis of the “central tunnel cabinet assembly” activity, performed by two workers of assembly lines during a working task, which lasts about one minute. The electromyography signals were acquired bilaterally, in three different body regions on the right and on the left side of the Erector Spinae, during standard working activities; the progression of trunk postures (flexion-extension, lateral flexion and twisting) was tracked by using an inertial motion-capture system made of wearable inertial sensors, to evaluate the alignment of the major body segments, using a developed algorithm. Data analysis showed kinematic and muscular activity patterns consistent with the expected ones. In particular, data show that the proposed technologies can be integrated and simultaneously used during workers’ real performing activities. Data quality also demonstrates that both types of sensors, EMG electrodes and IMU, not influenced each other, neither by electromagnetic noise usually present in an industrial environment. The results of this study show feasibility and usefulness of the integration of kinematic and electromyography technologies for assessing the biomechanical overload in production lines.

International audience; Neurological patients are characterized by multiple handicaps and by physical, behavioral, and psychological symptoms that are diverse and fluctuating. They need specialized, multidisciplinary and constant health care, a large amount of hygiene care and technical care, but also relational care. The objective of this communication is to present the anticipatory operative strategies used by a team of nurses working in a neurology hospitalization sector and their representations of healthcare quality. Healthcare quality is studied from the constructive perspective of activity ergonomics: it considers quality as a permanent process on-going in the work situation, articulating the effective conditions provided by the organization for the realization of work-as-imagined and the individual and collective resources available by the agents who deal with the actual context. The methodology used is based on an exploratory field study using the clinical method of work analysis in ergonomics. The results show that quality is the result of arbitrations and individual and collective adjustments built in context, which incorporate formal and informal standards of care quality according to the content of care, the type of patient and the current state of the latter. The strategies identified allow the agents to reconcile in more or less satisfactory ways the different existing standards.