Search

After an initial testing period at the Karlsruhe Institute of Technology, the upgraded EU 1 MW, 170 GHz continuous wave (CW) industrial prototype gyrotron (TH1509U) for Electron Cyclotron Resonance Heating and Current Drive (ECRH&CD) in ITER has been transferred to the Swiss Plasma Center (SPC) to be tested in an ITER relevant configuration, to reach the performance level required by Fusion for Energy (F4E) to qualify it for the ITER project, and to increase the pulse length to very long pulses.

A research activity in the Institute for Plasma Science and Technology of National Research Council (ISTP-CNR, Italy, former IFP-CNR) and in L.T. Calcoli (LTC, Italy) is aimed at the design and construction of calorimetric loads for absorption and measurement of high power millimeter-waves in the electron cyclotron frequency range. Recently, two CW 170 GHz loads, one for the European ITER gyrotron test facility and the other for the FALCON test- bed, have been installed at the Swiss Plasma Center (SPC, Switzerland). One short pulse (2 s) load for 1 MW, designed and optimised to operate at two different frequencies (84 GHz and 126 GHz), was provided for testing and conditioning two new dual-frequency gyrotrons for the Tokamak à Configuration Variable (TCV, Switzerland). Two additional CW loads, designed for absorbing powers higher than 1 MW, have been delivered to the National Institutes for Quantum and Radiological Science and Technology (QST, Japan) and exploited for the acceptance tests and the conditioning of the prototype of the Japanese ITER gyrotron. The present status and the most recent experimental results achieved in the framework of this development activity are reported in the paper.

The future EC systems will consist of several gyrotron sources providing MW-level millimeter wave power at a frequency around or above 170 GHz. The development of matched loads is necessary to test the new sources, the components for the transmission lines and the launchers, and must ensure high qualification for compatibility with the nuclear environment. The development at IFP-CNR and LTC of several compact high-power prototypes during the last decade led to a refinement of the overall design, resulting in the present low-reflectivity vacuum-compatible loads. The activity on loads is supported by F4E in view of the development of the EU gyrotron for ITER and required high-power tests at QST (Naka, Japan). Qualification is now supported by new tests at SPC (Lausanne, Switzerland) using the FALCON test-bed designed to test components and the EU gyrotron prototype for the EC system of ITER. These high-power tests, performed on the first CW prototype load (provided with 16 + 16 cooling channels in parallel) and shown in this paper, highlighted the need to improve the mechanical, vacuum and hydraulic design to reach the final goal of 1000s at ∼1 MW.

A research activity in the Institute for Plasma Science and Technology of National Research Council (ISTP-CNR, Italy, former IFP-CNR) and in L.T. Calcoli (LTC, Italy) is aimed at the design and construction of calorimetric loads for absorption and measurement of high power millimeter-waves in the electron cyclotron frequency range. Recently, two CW 170 GHz loads, one for the European ITER gyrotron test facility and the other for the FALCON test- bed, have been installed at the Swiss Plasma Center (SPC, Switzerland). One short pulse (2 s) load for 1 MW, designed and optimised to operate at two different frequencies (84 GHz and 126 GHz), was provided for testing and conditioning two new dual-frequency gyrotrons for the Tokamak a Configuration Variable (TCV, Switzerland). Two additional CW loads, designed for absorbing powers higher than 1 MW, have been delivered to the National Institutes for Quantum and Radiological Science and Technology (QST, Japan) and exploited for the acceptance tests and the conditioning of the prototype of the Japanese ITER gyrotron. The present status and the most recent experimental results achieved in the framework of this development activity are reported in the paper.

The European Gyrotron Consortium (EGYC) is developing the European 1 MW, 170 GHz Continuous Wave (CW) industrial prototype gyrotron for ITER in cooperation with Thales Electron Devices (TED) and Fusion for Energy (F4E). This conventional, hollow-cavity gyrotron, is based on the 1 MW, 170 GHz Short-Pulse (SP) modular gyrotron that has been designed and manufactured by the Karlsruhe Institute of Technology (KIT) in collaboration with TED. Both gyrotrons have been tested successfully in multiple experiments. In this work we briefly report on the results with the CW gyrotron at KIT and we focus at the experiments at the Swiss Plasma Center (SPC). In addition, we present preliminary results from various upgrades of the SP tube that are currently tested at KIT. © 2018

The future EC systems will consist of several gyrotron sources providing MW-level millimeter wave power at a frequency around or above 170 GHz. The development of matched loads is necessary to test the new sources, the components for the transmission lines and the launchers, and must ensure high qualification for compatibility with the nuclear environment. The development at IFP-CNR and LTC of several compact high-power prototypes during the last decade led to a refinement of the overall design, resulting in the present low-reflectivity vacuum-compatible loads. The activity on loads is supported by F4E in view of the development of the EU gyrotron for ITER and required high-power tests at QST (Naka, Japan). Qualification is now supported by new tests at SPC (Lausanne, Switzerland) using the FALCON test-bed designed to test components and the EU gyrotron prototype for the EC system of ITER. These high-power tests, performed on the first CW prototype load (provided with 16 + 16 cooling channels in parallel) and shown in this paper, highlighted the need to improve the mechanical, vacuum and hydraulic design to reach the final goal of 1000s at ∼1 MW. © 2018 Elsevier B.V.

The European 1-MW, 170-GHz continuous wave industrial prototype gyrotron for electron cyclotron resonance heating and current drive on international thermonuclear experimental reactor was during 2016 under test at the Karlsruhe Institute of Technology (KIT) test facility. In order to optimize the gyrotron operation, the tube was at first thoroughly tested in the short-pulse regime, with pulses that did not exceed 10 ms, for a wide range of operational parameters. Then, and after proper conditioning of the tube, the operation was extended to longer pulses with duration up to 180 s, which is the maximum pulselength possible at the KIT test facility. In this paper, we present in detail the achievements of the long-pulse experimental campaign.

The EU 1 MW, 170 GHz gyrotron with hollow cylindrical cavity have been designed within the European GYrotron Consortium (EGYC) in collaboration with the industrial partner Thales Electron Devices (TED) and under the coordination of Fusion for Energy (F4E). In the frame of the EU program, the short-pulse (SP) version of this tube was designed and manufactured by KIT in collaboration with TED. The experimental verification of the SP gyrotron prototype was successfully completed in 2015. The achieved experimental results show a very stable gyrotron operation with RF output power above 1 MW at good cavity interaction efficiency around 35%. The gyrotron was operated up to 10 ms pulse length; the nominal cavity mode TE32,9 has been excited at the frequency 170.1 GHz in agreement with the corresponding ITER specification. The Gaussian mode content of the output RF beam was about 98% and the total level of internal stray radiation was in the range of 2–3%. The manufacturing of the first industrial continuous-wave (CW) prototype gyrotron, based on the SP gyrotron design, was completed in November 2015 at TED. The tube was delivered to KIT and the experimental verification started in February 2016. Operation of the gyrotron with ms pulse duration resulted in stable excitation of the nominal mode at 170.22 GHz for a wide range of operating parameters and with a level of stray radiation comparable with the SP version. The maximum RF power achieved up to now in short-pulse operation at a level of 1 MW. The measured Gaussian mode content of the RF beam is 97%. Currently, further preparation for the CW operation of the gyrotron is in progress. © 2017

The European 1-MW, 170-GHz continuous wave industrial prototype gyrotron for electron cyclotron resonance heating and current drive on international thermonuclear experimental reactor was during 2016 under test at the Karlsruhe Institute of Technology (KIT) test facility. In order to optimize the gyrotron operation, the tube was at first thoroughly tested in the short-pulse regime, with pulses that did not exceed 10 ms, for a wide range of operational parameters. Then, and after proper conditioning of the tube, the operation was extended to longer pulses with duration up to 180 s, which is the maximum pulselength possible at the KIT test facility. In this paper, we present in detail the achievements of the long-pulse experimental campaign. © 1963-2012 IEEE.

The progress in the development of the European 170 GHz, 1 MW/CW gyrotron for electron cyclotron heating & current drive (ECH&CD) on ITER is reported. A continuous wave (CW) prototype is being manufactured by Thales Electron Devices (TED), France, while a short-pulse (SP) prototype gyrotron is in parallel under manufacture at Karlsruhe Institute of Technology (KIT), with the purpose of validating the design of the CW industrial prototype components. The fabrication of most of the sub-assemblies of the SP prototype has been completed. In a first step, an existing magnetron injection gun (MIG) available at KIT was used. Despite this non-ideal configuration, the experiments provided a validation of the design, substantiated by an excellent agreement with numerical simulations. The tube, operated without a depressed collector, is able to produce more than 1 MW of output power with efficiency in excess of 30%, as expected, and compatible with the ITER requirements. © 2015 Karlsruhe Institute of Technology.

Europe is devoting significant joint efforts to develop and to manufacture MW-level gyrotrons for electron cyclotron heating and current drive of future plasma experiments. The two most important ones are the stellarator Wendelstein W7-X at Greifswald and the Tokamak ITER at Cadarache. While the series production of the 140 GHz, 1 MW, CW gyrotrons for the 10-MW electron cyclotron resonance heating system of stellarator W7-X is proceeding, the European GYrotron Consortium is presently developing the EU-1 MW, 170 GHz, CW gyrotron for ITER. The initial design had already been initiated in 2007, as a risk mitigation measure during the development of the advanced ITER EU-2-MW coaxial-cavity gyrotron. The target of the ITER EU-1-MW conventional-cavity design is to benefit as much as possible from the experiences made during the development and series production of the W7-X gyrotron and of the experiences gained from the earlier EU-2-MW coaxial-cavity gyrotron design. Hence, the similarity of the construction will be made visible in this paper. During 2012, the scientific design of the ITER EU-1-MW gyrotron components has been finalized. In collaboration with the industrial partner Thales electron devices, Vélizy, France, the industrial design of the technological parts of the gyrotron is being completed. A short-pulse prototype is under development to support the design of the CW prototype tube. The technological path toward the EU ITER-1 MW gyrotron and the final design will be presented. © 2013 IEEE.

____

___

_

Articolo numero ITR/P1-10

_

The European Union is working toward providing 2-MW, coaxial-cavity, continuous-wave (cw) 170-GHz gyrotrons for ITER. Their design is based on results,from an experimental preprototype tube having a pulse length of several milliseconds, in operation at Forschungszentrum Karlsruhe (FZK) for several years now. The first industrial prototype tube was designed for cw operation but, in a first phase, aimed at a pulse length of 1 s at the European Gyrotron Test Facility in Lausanne, Switzerland, as part of a phased testing/development program. (1 s, 60 s, cw). The first experimental results of the operation of this prototype gyrotron are reported here. The microwave generation was characterized at very short pulse length (

_

The EU programme for the development of the gyrotron for ITER, carried out in cooperation between European laboratories and industrial partners, consists of (i) the manufacturing and testing the 2 MW, CW coaxial cavity gyrotron at 170 GHz meeting both technological constraints and ITER specifications. This goal will be conducted in three different steps: 1 s, 60 s and CW; (ii) in parallel, the development and improvement of critical components for the coaxial concept will continue. While the coaxial concept provides substantial advantages in terms of cost and EC power available for the ITER system with respect to the I MW cylindrical cavity gyrotron, the development programme entails additional risks due to both the relatively tight schedule and the developments still required. A fall back option consisting in a more traditional I MW gyrotron is foreseen in case of major difficulties in the development of the 2 MW coaxial cavity gyrotron. This alternative development is expected to benefit from the successful development of the 140 GHz gyrotron for W7-X; (iii) a Test Facility for testing at high power, CW the prototype gyrotrons and other EC H&CD system components has been established at the CRPP, in Lausanne. The tests with the first prototype of coaxial gyrotron are currently progressing. A decision point between the coaxial and cylindrical cavity concept is expected by the end of 2009 when the tests with the first and refurbished prototype will be available.