Search

Understanding the influence of local electric fields on electrochemical reactions is crucial for designing highly selective electrocatalysts for CO 2 reduction reactions (CO 2 RR). In this study, we provide a theoretical investigation of the effect of the local electric field induced by the negative-biased electrode and cations in the electrolyte on the energetics and reaction kinetics of CO 2 RR on 2D hybrid metal/graphene electrocatalysts. Our findings reveal that the electronic structures of the CO 2 molecule undergo substantial modification, resulting in the increased adsorption energy of CO 2 on metal/graphene structures, thus reducing the initial barrier of the CO 2 RR mechanism. This field-assisted CO 2 RR mechanism promotes CO production while suppressing HCOOH production. Our findings highlight the potential of manipulating electric fields to tailor the pathways of CO 2 RR, providing new avenues designing selective electrocatalysts., (© 2024 The Authors. ChemSusChem published by Wiley-VCH GmbH.)

Anthropogenic activities have disrupted the natural nitrogen cycle, increasing the level of nitrogen contaminants in water. Nitrogen contaminants are harmful to humans and the environment. This motivates research on advanced and decarbonized treatment technologies that are capable of removing or valorizing nitrogen waste found in water. In this context, the electrocatalytic conversion of inorganic- and organic-based nitrogen compounds has emerged as an important approach that is capable of upconverting waste nitrogen into valuable compounds. This approach differs from state-of-the-art wastewater treatment, which primarily converts inorganic nitrogen to dinitrogen, and organic nitrogen is sent to landfills. Here, we review recent efforts related to electrocatalytic conversion of inorganic- and organic-based nitrogen waste. Specifically, we detail the role that electrocatalyst design (alloys, defects, morphology, and faceting) plays in the promotion of high-activity and high-selectivity electrocatalysts. We also discuss the impact of wastewater constituents. Finally, we discuss the critical product analyses required to ensure that the reported performance is accurate., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Tracking changes in the chemical state of transition metals in alkali-ion batteries is crucial to understanding the redox chemistry during operation. X-ray absorption spectroscopy (XAS) is often used to follow the chemistry through observed changes in the chemical state and local atomic structure as a function of the state-of-charge (SoC) in batteries. In this study, we utilize an operando X-ray emission spectroscopy (XES) method to observe changes in the chemical state of active elements in batteries during operation. Operando XES and XAS were compared by using a laboratory-scale setup for four different battery systems: LiCoO 2 (LCO), Li[Ni 1/3 Co 1/3 Mn 1/3 ]O 2 (NMC111), Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2 (NMC811), and LiFePO 4 (LFP) under a constant current charging the battery in 10 h (C/10 charge rate). We show that XES, despite narrower chemical shifts in comparison to XAS, allows us to fingerprint the battery SOC in real time. We further demonstrate that XES can be used to track the change in net spin of the probed atoms by analyzing changes in the emission peak shape. As a test case, the connection between net spin and the local chemical and structural environment was investigated by using XES and XAS in the case of electrochemically delithiated LCO in the range of 2-10% lithium removal.

Efficiently transforming CO2 into renewable energy sources is crucial for decarbonization efforts. Formic acid (HCOOH) holds a great promise as a hydrogen storage compound due to its high hydrogen density, non-toxicity, and stability under ambient conditions. The electrochemical reduction of CO2 (CO2RR) on conventional carbon black-supported metal catalysts operates at ambient conditions, however, it faces challenges such as low stability through dissolution and agglomeration and requires high overpotentials to overcome the competitive hydrogen evolution reaction (HER). In this study, we modify the physical/chemical properties of metal surfaces by depositing metal monolayers on graphene (M/G) to create highly active and stable electrocatalysts. Strong covalent bonding between graphene and metal is induced by the hybridization of sp and d orbitals, especially the sharp , , and  orbitals of metal near the Fermi level. Moreover, charge polarization on graphene in M/G enables the deposition of another thin metallic film, forming metal/graphene/metal (M/G/M) structures. Finally, evaluating overpotentials required for CO2RR to HCOOH and HER, we find that Pt/G, Pd/G, and Pt/G/Ag exhibit excellent activity and selectivity toward HCOOH production. Our novel 2D hybrid catalyst design methodology may offer insights into enhanced electrochemical reactions through the electronic mixing of metal and other p-block elements., (© 2024 Wiley-VCH GmbH.)

Over the past decades, the design of active catalysts has been the subject of intense research efforts. However, there has been significantly less deliberate emphasis on rationally designing a catalyst system with a prolonged stability. A major obstacle comes from the ambiguity behind how catalyst degrades. Several degradation mechanisms are proposed in literature,   but with a lack of systematic studies, the causal relations between degradation and those proposed mechanisms remain ambiguous. Here, a systematic study of a catalyst system comprising of small particles and single atoms of Pt sandwiched between graphene layers, GR/Pt/GR, is studied to  unravel the degradation mechanism of the studied electrocatalyst for oxygen reduction reaction(ORR). Catalyst suffers from atomic dissolution under ORR harsh acidic and oxidizing operation voltages. Single atoms trapped in point defects within the top graphene layer on their way hopping through toward the surface of GR/Pt/GR architecture. Trapping mechanism renders individual Pt atoms as single atom catalyst sites catalyzing ORR for thousands of cycles before washed away in the electrolyte. The GR/Pt/GR catalysts also compare favorably to state-of-the-art commercial Pt/C catalysts and demonstrates a rational design of a hybrid nanoarchitecture with a prolonged stability for thousands of operation cycles., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Iron phosphide with high specific capacity has emerged as an appealing candidate for next-generation lithium-ion battery anodes. However, iron phosphide could undergo conversion reactions and generally suffer from a rapid capacity degradation upon cycling due to its structure pulverization. Chemomechanical breakdown of iron phosphide due to its rigidity has been a challenge to fully realizing its electrochemical performance. To address this challenge, we report here on an enticing opportunity: a flexible, free-standing iron phosphide anode with Fe 2 P nanoparticles confined in carbon nanofibers may overcome existing challenges. For the synthesis, we introduce a facile electrospinning strategy that enables in situ formation of Fe 2 P within a carbon matrix. Such a carbon matrix can effectively minimize the structure change of Fe 2 P particles and protect them from pulverization, allowing the electrodes to retain a free-standing structure after long-term cycling. The produced electrodes showed excellent electrochemical performance in lithium-ion half and full cells, as well as in flexible pouch cells. These results demonstrate the successful development of iron phosphide materials toward high capacity, light weight, and flexible energy storage.

Platinum atomic layers grown on graphene were investigated by atomic resolution transmission electron microscopy (TEM). These TEM images reveal the epitaxial relationship between the atomically thin platinum layers and graphene, with two optimal epitaxies observed. The energetics of these epitaxies influences the grain structure of the platinum film, facilitating grain growth via in-plane rotation and assimilation of neighbor grains, rather than grain coarsening from the movement of grain boundaries. This growth process was enabled due to the availability of several possible low-energy intermediate states for the rotating grains, the Pt-Gr epitaxies, which are minima in surface energy, and coincident site lattice grain boundaries, which are minima in grain boundary energy. Density functional theory calculations reveal a complex interplay of considerations for minimizing the platinum grain energy, with free platinum edges also having an effect on the relative energetics. We thus find that the platinum atomic layer grains undergo significant reorientation to minimize interface energy ( via epitaxy), grain boundary energy ( via low-energy orientations), and free edge energy. These results will be important for the design of two-dimensional graphene-supported platinum catalysts and obtaining large-area uniform platinum atomic layer films and also provide fundamental experimental insight into the growth of heteroepitaxial thin films.

Cobalt phosphide (CoP) is a potential alternative to Li-ion battery (LIB) anodes due to its high specific capacity. However, there remain challenges, including low rate capability and rapid capacity degradation, because of its structural pulverization and poor electrical conductivity. Here, we demonstrate an effective strategy to enhance CoP-based anodes by developing a CoP/graphene nanocomposite. Such a nanocomposite can be achieved by embedding nanostructured CoP in a reduced graphene oxide (rGO) nanosheet network through a versatile method including the low-temperature formation of metal oxide nanoparticles, freeze-drying, and a subsequent phosphidation process. Benefiting from its favorable nanoarchitecture, the CoP/rGO nanocomposite is found to possess enhanced conductivity, porosity and structural stability. As a result, the nanocomposite shows a high specific capacity up to 1154 mA h g -1 at a current density of 100 mA g -1 and a remarkable rate capability (840 mA h g -1 at 2 A g -1 ). Moreover, a high capacity of 808 mA h g -1 is achieved even after 2000 cycles. These promising features indicate that our strategy could open the door to the further applications of CoP-based anodes in LIBs.

The concept of a core-shell metallic structures, with a few atomic layers of the "shell" metal delineated from the "core" metal with atomic sharpness opens the door to a multitude of surface-driven materials properties that can be tuned. However, in practice, such architectures are difficult to retain due to the entropic cost of a segregated near-surface architecture, and the core and surface atoms inevitably mix through interdiffusion over time. We present here a systematic study of interdiffusion in a Pt on Au core-shell architecture and the role of an interrupting single layer of graphene sandwiched between them. The physical and chemical structure of the (near)surface is probed via mean-free-path tuned X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy (HRTEM), and electrochemistry (the oxygen reduction reaction, ORR). We find that at operating temperatures above 100 °C, there is potential for interdiffusion to occur between the primary and support metals of the core-shell catalyst system, which can diminish the catalyst activity toward ORR. The introduction of a single-layer graphene, as an interface between the core and shell metal layers, acts as a barrier that prevents unwanted surface alloying between the layered metals. HRTEM imaging shows that fully wetted Pt monolayers can be grown on a graphene template, allowing a high level of surface utilization of the catalyst material. We present how the use of graphene as a barrier to diffusion mitigates the loss of surface catalytic sites, showing much improved retention of Pt monolayer surface at elevated temperatures.

Understanding the nature of interfacial defects of materials is a critical undertaking for the design of high-performance hybrid electrodes for photocatalysis applications. Theoretical and computational endeavors to achieve this have touched boundaries far ahead of their experimental counterparts. However, to achieve any industrial benefit out of such studies, experimental validation needs to be systematically undertaken. In this sense, we present herein experimental insights into the synergistic relationship between the lattice position and oxidation state of tungsten ions inside a TiO2 lattice, and the respective nature of the created defect states. Consequently, a roadmap to tune the defect states in anodically-fabricated, ultrathin-walled W-doped TiO2 nanotubes is proposed. Annealing the nanotubes in different gas streams enabled the engineering of defects in such structures, as confirmed by XRD and XPS measurements. While annealing under hydrogen stream resulted in the formation of abundant Wn+ (n < 6) ions at the interstitial sites of the TiO2 lattice, oxygen- and air-annealing induced W6+ ions at substitutional sites. EIS and Mott-Schottky analyses indicated the formation of deep-natured trap states in the hydrogen-annealed samples, and predominantly shallow donating defect states in the oxygen- and air-annealed samples. Consequently, the photocatalytic performance of the latter was significantly higher than those of the hydrogen-annealed counterparts. Upon increasing the W content, photoelectrochemical performance deteriorated due to the formation of WO3 crystallites that hindered charge transfer through the photoanode, as evident from the structural and chemical characterization. To this end, this study validates the previous theoretical predictions on the detrimental effect of interstitial W ions. In addition, it sheds light on the importance of defect states and their nature for tuning the photoelectrochemical performance of the investigated materials.

In this study, we explore the dimensional aspect of structure-driven surface properties of metal monolayers grown on a graphene/Au template. Here, surface limited redox replacement (SLRR) is used to provide precise layer-by-layer growth of Pt monolayers on graphene. We find that after a few iterations of SLRR, fully wetted 4-5 monolayer Pt films can be grown on graphene. Incorporating graphene at the Pt-Au interface modifies the growth mechanism, charge transfers, equilibrium interatomic distances, and associated strain of the synthesized Pt monolayers. We find that a single layer of sandwiched graphene is able to induce a 3.5% compressive strain on the Pt adlayer grown on it, and as a result, catalytic activity is increased due to a greater areal density of the Pt layers beyond face-centered-cubic close packing. At the same time, the sandwiched graphene does not obstruct vicinity effects of near-surface electron exchange between the substrate Au and adlayers Pt. X-ray photoelectron spectroscopy (XPS) and extended X-ray absorption fine structure (EXAFS) techniques are used to examine charge mediation across the Pt-graphene-Au junction and the local atomic arrangement as a function of the Pt adlayer dimension. Cyclic voltammetry (CV) and the oxygen reduction reaction (ORR) are used as probes to examine the electrochemically active area of Pt monolayers and catalyst activity, respectively. Results show that the inserted graphene monolayer results in increased activity for the Pt due to a graphene-induced compressive strain, as well as a higher resistance against loss of the catalytically active Pt surface.

Information from ex situ characterization can fall short in describing complex materials systems simultaneously exposed to multiple external stimuli. Operando X-ray absorption spectroscopy (XAS) was used to probe the local atomistic and electronic structure of specific elements in a La0.6Sr0.4Co0.2Fe0.8O(3-δ) (LSCF) thin film cathode exposed to air contaminated with H2O and CO2 under operating conditions. While impedance spectroscopy showed that the polarization resistance of the LSCF cathode increased upon exposure to both contaminants at 750 °C, XAS near-edge and extended fine structure showed that the degree of oxidation for Fe and Co decreases with increasing temperature. Synchrotron-based X-ray photoelectron spectroscopy tracked the formation and removal of a carbonate species, a Co phase, and different oxygen moieties as functions of temperature and gas. The combined information provides insight into the fundamental mechanism by which H2O and CO2 cause degradation in the cathode of solid oxide fuel cells., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Simulations of platinum oxidation in literature have yet to fully replicate an experimental cyclic voltammogram. In this manuscript a mechanism for platinum oxidation is proposed based upon the results of in operando X-ray absorption spectroscopy, where it was found that PtO2 is present at longer hold times. A new method to quantify extended X-ray absorption fine structure data is presented, and the extent of oxidation is directly compared to electrochemical data. This comparison indicated that PtO2 was formed at the expense of an initial oxide species. From previous literature studies it can be concluded that the rate of platinum oxidation is not a function of only potential and coverage. To that end, the concept of a heterogeneous oxide layer was introduced into the model, whereby place-exchanged PtO2 structures of varying energy states are formed through a single transition state. This treatment allowed, for the first time, the simulation of the correct current-potential behavior at varying scan rates and upper potential limits.

NEXAFS spectroscopy was used to investigate the temperature dependence of thermally active ethylene-vinyl acetate | multiwall carbon nanotube (EVA|MWCNT) films. The data shows systematic variations of intensities with increasing temperature. Molecular orbital assignment of interplaying intensities identified the 1s → π* C=C and 1s → π* C=O transitions as the main actors during temperature variation. Furthermore, enhanced near-edge interplay was observed in prestrained composites. Because macroscopic observations confirmed enhanced thermal-mechanical actuation in prestrained composites, our findings suggest that the interplay of C=C and C=O π orbitals may be instrumental to actuation.

This work describes the near conduction band edge structure of electrospun mats of multiwalled carbon nanotube (MWCNT)-polydimethylsiloxane-poly(methyl methacrylate) by near edge X-ray absorption fine structure (NEXAFS) spectroscopy. Effects of adding nanofillers of different sizes were addressed. Despite observed morphological variations and inhomogeneous carbon nanotube distribution, spun mats appeared homogeneous under NEXAFS analysis. Spectra revealed differences in emissions from glancing and normal spectra, which may evidence phase separation within the bulk of the micrometer-size fibers. Further, dichroic ratios show polymer chains did not align, even in the presence of nanofillers. Addition of nanofillers affected emissions in the C-H, C═O, and C-C regimes, suggesting their involvement in interfacial matrix-carbon nanotube bonding. Spectral differences at glancing angles between pristine and composite mats suggest that geometric conformational configurations are taking place between polymeric chains and carbon nanotubes. These differences appear to be carbon nanotube-dimension dependent and are promoted upon room temperature mixing and shear flow during electrospinning. CH-π bonding between polymer chains and graphitic walls, as well as H-bonds between impurities in the as-grown MWCNTs and polymer pendant groups are proposed bonding mechanisms promoting matrix conformation.

Electrical stimulation has been used clinically to promote bone regeneration in cases of fractures with delayed union or nonunion, with several in vitro and in vivo reports suggesting its beneficial effects on bone formation. However, the use of electrical stimulation of titanium (Ti) implants to enhance osseointegration is less understood, in part because of the few in vitro models that attempt to represent the in vivo environment. In this article, the design of a new in vitro system that allows direct electrical stimulation of osteoblasts through their Ti substrates without the flow of exogenous currents through the media is presented, and the effect of applied electrical polarization on osteoblast differentiation and local factor production was evaluated. A custom-made polycarbonate tissue culture plate was designed to allow electrical connections directly underneath Ti disks placed inside the wells, which were supplied with electrical polarization ranging from 100 to 500 mV to stimulate MG63 osteoblasts. Our results show that electrical polarization applied directly through Ti substrates on which the cells are growing in the absence of applied electrical currents may increase osteoblast differentiation and local factor production in a voltage-dependent manner., (© 2013 Wiley Periodicals, Inc.)

In this paper, the fabrication and growth mechanism of net-shaped micropatterned self-organized thin-film TiO2 nanotube (TFTN) arrays on a silicon substrate are reported. Electrochemical anodization is used to grow the nanotubes from thin-film titanium sputtered on a silicon substrate with an average diameter of ~30 nm and a length of ~1.5 μm using aqueous and organic-based types of electrolytes. The fabrication and growth mechanism of TFTN arrays from micropatterned three-dimensional isolated islands of sputtered titanium on a silicon substrate is demonstrated for the first time using focused-ion-beam (FIB) technique. This work demonstrates the use of the FIB technique as a simple, high-resolution, and maskless method for high-aspect-ratio etching for the creation of isolated islands and shows great promise toward the use of the proposed approach for the development of metal oxide nanostructured devices and their integration with micro- and nanosystems within silicon-based integrated-circuit devices.

Pt monolayers were grown by surface-limited redox replacement (SLRR) on two types of Au nanostructures. The Au nanostructures were fabricated electrochemically on carbon fiber paper (CFP) by either potentiostatic deposition (PSD) or potential square wave deposition (PSWD). The morphology of the Au/CFP heterostructures, examined using scanning electron microscopy (SEM), was found to depend on the type of Au growth method employed. The properties of the Pt deposit, as studied using X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), and cyclic voltammetry (CV), were found to depend strongly on the morphology of the support. Specifically, it was found that smaller Au morphologies led to a higher degree of cationicity in the resulting Pt deposit, with Pt(4+) and Pt(2+) species being identified using XPS and XAS. For fuel-cell catalysts, the resistance of ultrathin catalyst deposits to surface area loss through dissolution, poisoning, and agglomeration is critical. This study shows that an equivalent of two monolayers (ML) is the low-loading limit of Pt on Au. At 1 ML or below, the Pt film decreases in activity and durability very rapidly due to presence of cationic Pt., (© 2011 American Chemical Society)

We investigate the oxidation of, and the reaction of ethylene with, Ni(111) with and without sub-monolayer Ag adlayers as a function of temperature. The addition of Ag to Ni(111) is shown to enhance the activity towards the ethylene epoxidation reaction, and increase the temperature at which ethylene oxide is stable on the surface. We present a systematic study of the formation of chemisorbed oxygen on the Ag-Ni(111) surfaces and correlate the presence and absence of O(1-) and O(2-) surface species with the reactivity towards ethylene. By characterizing the samples with low-energy electron microscopy (LEEM) in combination with X-ray photoelectron spectroscopy (XPS), we have identified specific growth of silver on step-edge sites and successfully increased the temperature at which the produced ethylene oxide remains stable, a trait which is desirable for catalysis.

Aims: The aim of this study was to investigate the prognostic impact of right ventricular (RV) size in patients with chronic heart failure., Methods and Results: Normal volunteers (n = 80) and patients (n = 380) with left ventricular (LV) ejection fraction <45% on echocardiography and on optimal treatment for heart failure underwent cardiac magnetic resonance imaging with measurement of LV and RV volumes, mass and ejection fraction. The mean and the standard deviation (SD) of the RV end-systolic volume index in normal subjects were used to define the normal range as: mean RV end-systolic volume index +2 SD. Patients with dilated RV (>2 SD beyond the mean) (25%) had more frequent evidence of fluid overload in clinical examination and greater LV dimensions (P < 0.0001). During follow-up (median 45, interquartile range: 28-66 months), 37% of patients with and 24% without RV dilation died (log-rank test = 8.4; P = 0.004). In a multivariable Cox regression model, including 13 other clinical variables, RV (HR: 1.08/10 mL/m(2), 95% CI: 1.00-1.18, P = 0.044), but not LV, end-systolic volume index predicted a worse outcome., Conclusion: Twenty-five per cent of patients with heart failure due to LV systolic dysfunction have a dilated right ventricle. Greater RV dimensions predict mortality in patients with chronic heart failure. Treatments aimed at preserving or enhancing RV structure and function, possibly by unloading the RV by reducing pulmonary vascular resistance or left atrial pressure, should be investigated.

Intravascular ultrasound (IVUS) is a catheter-based imaging modality, which provides high resolution cross-sectional images of the coronary arteries. Unlike angiography, which displays only the opacified luminal silhouette, IVUS permits imaging of both the lumen and vessel wall and allows characterization of the type of the plaque. Although IVUS provides accurate quantitative and qualitative information regarding the lumen and outer vessel wall, it is not routinely used during coronary angiography or in angioplasty procedures because the risk to benefit ratio (additional expense, procedural time, certain degree of risk, and complication versus improvement in the outcome) does not justify routine utilization. Nevertheless, there are situations where IVUS is extremely useful tool both for diagnosis and management so the aim of this review is to summarize the indications for IVUS imaging in the contemporary clinical practice., (© 2010, Wiley Periodicals, Inc.)

O K-edge and Co L-edge near-edge X-ray absorption fine structure has been used to examine the cathode of an intact solid-state lithium ion battery. The novel technique allowed for the simultaneous acquisition of partial electron yield and fluorescence yield data during the first charge cycle of a LiCoO(2)-based battery below the intercalation voltage. The chemical environments of oxygen and cobalt at the surface are shown to differ chemically from those in the bulk. The present design enables a wide variety of in situ spectroscopies, microscopies and scattering techniques.

Background: The heart transforms structurally and functionally with age but the nature and magnitude of reported changes appear inconsistent. This study was designed to assess left ventricular (LV) morphology, global and longitudinal function in healthy older men and women using cardiac magnetic resonance (CMR)., Methods: Ninety-five healthy subjects (age 62+/-16 years, range 22-91 years) underwent breath-hold cine CMR. LV end-diastolic volume (EDV), end-systolic volume (ESV), myocardial mass, ejection fraction (EF), mass-to-volume ratio, mean midventricular wall motion, thickness and thickening were calculated from short-axis data sets. Average mitral annular displacement was measured to assess longitudinal LV function., Results: Subjects were divided according to age (< 65 and > or = 65 years) and sex. EDV and ESV indices (corrected for body surface area) decreased whilst EF increased with age. There was no difference in LV myocardial mass index between the age groups, but midventricular wall thickness was significantly higher in older people. Mass-to-volume ratio also increased with age. In contrast to EF, mitral annular displacement declined with age. Midventricular LV wall thickness, myocardial mass index and mass-to-volume ratio were higher in men than in women but there were no differences in measures of global and longitudinal LV systolic function., Conclusions: Due to smaller LV volumes but higher wall thickness, myocardial mass remains unchanged with age. We have found an age-related increase in EF and reduction in longitudinal LV function in apparently normal subjects. This must be borne in mind when assessing older patients with possible heart failure and normal LV systolic function. Men have higher myocardial mass than women.

Unlike the well-defined long-range order that characterizes crystalline metals, the atomic arrangements in amorphous alloys remain mysterious at present. Despite intense research activity on metallic glasses and relentless pursuit of their structural description, the details of how the atoms are packed in amorphous metals are generally far less understood than for the case of network-forming glasses. Here we use a combination of state-of-the-art experimental and computational techniques to resolve the atomic-level structure of amorphous alloys. By analysing a range of model binary systems that involve different chemistry and atomic size ratios, we elucidate the different types of short-range order as well as the nature of the medium-range order. Our findings provide a reality check for the atomic structural models proposed over the years, and have implications for understanding the nature, forming ability and properties of metallic glasses.

We have characterized the icosahedral short-range order in amorphous solids using local environment probes. Such topological local order is pronounced even in an amorphous alloy that does not form quasicrystalline phases upon crystallization, as demonstrated by the extended x-ray absorption fine structure and x-ray absorption near-edge structure of a Ni-Ag amorphous alloy analyzed through reverse Monte Carlo simulations.

The short-range atomic order around all three constituent atoms in a prototypical bulk metallic glass (BMG) system was probed in a complementary way, using extended X-ray absorption fine structure for neighborhood of the higher atomic number elements, and extended energy loss fine structure (EXELFS) for the lower atomic number ones. The Pd(x)Ni((80-x))P((20)) system is a prototype for a whole class of BMG formers which are 80% transition metal and 20% metalloid. We find that the structure of these BMGs could be explained in terms of those of glasses at the end of the BMG range, namely, Pd(60)Ni(20)P(20) and Pd(30)Ni(50)P(20). The binary phosphide crystals near [Formula: see text] and 80 are found to be simulate very well the local atomic structure of Pd(30)Ni(50)P(20) and Pd(60)Ni(20)P(20) glasses, respectively. The best glass former in this series, Pd(40)Ni(40)P(20), is best described by a weighted average of Pd(30)Ni(50)P(20) and Pd(60)Ni(20)P(20) structures.