Search

With the sharp increase in global energy demand, industrial and residential buildings are responsible for around 40% of the energy consumed with most of this energy portion being generated by non-renewable sources, which significantly contribute to global warming and environmental hazards. The net-zero energy building (NZEB) concept attempts to solve the global warming issue, whereby a building will produce, on-site, its required energy demand throughout the year from renewable energy sources. This can be achieved by integrating photovoltaic (PV) building materials, called building-integrated photovoltaic (BIPV) modules, throughout the building skin, which simultaneously act as construction materials and energy generators. Currently, architects and builders are inclined to design a building using BIPV modules due to the limited colors available, namely, black or blue, which result in a monotonous building appearance. Therefore, there is an increasing demand/need to develop modern, aesthetically pleasing BIPV green energy products for the use of architects and the construction industry. This review article presents the current stage and future goal of advanced building integrated photovoltaic systems, focusing on the aesthetically appealing BIPV systems, and their applications towards overcoming global challenges and stepping forward to achieve a sustainable green energy building environment. Additionally, we present the summary and outlook for the future development of aesthetically appealing building integrated photovoltaic systems.

In this study, a solid-state modified pH sensor with RF magnetron sputtering technology was developed. The sensor consists of an active electrode consisting of a titanium nitride (TiN) film with a protective membrane of Nafion and a reference glass electrode of Ag/AgCl. The sensitivity of the pH sensor was investigated. Results show a sensor with excellent characteristics: sensitivity of 58.6 mV/pH for pH values from 2 to 12, very short response time of approximately 12 s in neutral pH solutions, and stability of less than 0.9 mV in 10 min duration. Further improvement in the performance of the TiN sensor was studied by application of a Nafion protective membrane. Nafion improves the sensor sensitivity close to Nernstian by maintaining a linear response. This paves the way to implement TiN with Nafion protection to block any interference species during real time applications in biosensing and medical diagnostic pH sensors.

pH sensors are increasingly being utilized in the biomedical field and have been implicated in health applications that aim to improve the monitoring and treatment of patients. In this work, a previously developed Titanium Nitride (TiN) solid-state pH sensor is further enhanced, with the potential to be used for pH regulation inside the human body and for other biomedical, industrial, and environmental applications. One of the main limitations of existing solid-state pH sensors is their reduced performance in high redox mediums. The potential shift E0 value of the previously developed TiN pH electrode in the presence of oxidizing or reducing agents is 30 mV. To minimize this redox shift, a Nafion-modified TiN electrode was developed, tested, and evaluated in various mediums. The Nafion-modified electrode has been shown to shift the E0 value by only 2 mV, providing increased accuracy in highly redox samples while maintaining acceptable reaction times. Overcoming the redox interference for pH measurement enables several advantages of the Nafion-modified TiN electrode over the standard pH glass electrode, implicating its use in medical diagnosis, real-time health monitoring, and further development of miniaturized smart sensors.

The building integrated photovoltaic (BIPV) system is one of the contributors which has enormous potential to reach the goal of net-zero energy buildings (NZEB) that significantly reduce the use of fossil fuels that contribute to global warming. However, the limitations of the visual and aesthetic appearance of current BIPV systems make this aspiration unlikely. This study investigates the limitations of the single-color-based PV modules that are dull in appearance and have low photo-conversion efficiency (PCE). In order to solve this issue, we designed, developed, and characterized micro-patterned-based multicolored photovoltaic (MPCPV) modules which are applicable to net-zero building and development. Our newly developed MPCPV module exhibits an aesthetically attractive and flexible building color suitable for industrial application. Furthermore, the MPCPV module possesses an efficiency of 9.6%, which is 4.1% higher than a single-color PV module (5.5%) but closer to conventional thin-film PV modules. In addition, the other output parameters, such as short-circuit current (Isc), open-circuit voltage (Voc), maximum power (Pmax), and fill factor (FF), indicate that our developed colored PV module is suitable for modern infrastructures that will enable energy generation on-site without compromising the aesthetic appearance. Finally, this research will have a substantial influence on the NZEB and will play an important part in the development of a sustainable environment.

Since 2007, at the Electron Science Research Institute (ESRI) nano-fabrication laboratories, Edith Cowan University, Australia, we have devoted research efforts to the synthesis and characterization of bismuth-containing ferrite-garnet-type thin-film magneto-optic (MO) materials of different compositions. We report on the growth and characteristics of radio frequency (RF) magnetron sputtered bismuth-substituted iron-garnet thin films. We study the process parameters associated with the RF magnetron sputter deposition technique and investigate the results of optimizing process parameters. To achieve the best MO properties, we employ a few unique techniques, such as co-sputtered nanocomposite films and all-garnet multilayer structures, as well as the application of oxygen plasma treatment to amorphous garnet layers immediately following the deposition process. We demonstrated a remarkable enhancement in the MO properties of Bi-containing ferrite-type garnet thin-film materials, including record-high MO figures of merit and improved conventional and unconventional hysteresis loops of Faraday rotation. Previously unpublished research results on the forward-looking applications of magnetic garnet coatings applied to microparticles of advanced luminescent materials are reported. In the context of developing the next-generation ultra-fast optoelectronic devices, such as light intensity switches and modulators, high-speed flat panel displays, and high-sensitivity sensors, it is important to consider the desirable optical, magnetic, and magneto-optic properties that are found in highly bismuth-substituted iron garnet thin-film materials of various composition types.

© 2021 by the authors. Licensee MDPI, Basel, Switzerland. Manipulation of the LED illumination spectrum can enhance plant growth rate and development in grow tents. We report on the identification of the illumination spectrum required to significantly enhance the growth rate of sweet basil (Ocimum basilicum L.) plants in grow tent environments by controlling the LED wavebands illuminating the plants. Since the optimal illumination spectrum depends on the plant type, this work focuses on identifying the illumination spectrum that achieves significant basil biomass improvement compared to improvements reported in prior studies. To be able to optimize the illumination spectrum, several steps must be achieved, namely, understanding plant biology, conducting several trial‐and‐error experiments, iteratively refining experimental conditions, and undertaking accurate statistical analyses. In this study, basil plants are grown in three grow tents with three LED illumination treatments, namely, only white LED illumination (denoted W*), the combination of red (R) and blue (B) LED illumination (denoted BR*) (relative red (R) and blue (B) intensities are 84% and 16%, respectively) and a combination of red (R), blue (B) and far‐red (F) LED illumination (denoted BRF*) (relative red (R), blue (B) and far‐red (F) intensities are 79%, 11%, and 10%, respectively). The photosynthetic photon flux density (PPFD) was set at 155 μmol m−2 s−1 for all illumination treatments, and the photoperiod was 20 h per day. Experimental results show that a combination of blue (B), red (R), and far‐red (F) LED illumination leads to a one‐fold increase in the yield of a sweet basil plant in comparison with only white LED illumination (W*). On the other hand, the use of blue (B) and red (R) LED illumination results in a half‐fold increase in plant yield. Understanding the effects of LED illumination spectrum on the growth of plant sweet basil plants through basic horticulture research enables farmers to s