Search

Usually, hyperspectral data captured from an airborne UAV or satellite contain some noise that can be severe in some channels. Often, channels that are badly affected by the noise are discarded. This is because the corrupted channels cannot be reclaimed by common filtering techniques, making important information in the affected channels different from those of field spectroscopy of similar wavelengths. In this study, a fast-denoising method is implemented on some channels of oil palm hyperspectral data that are badly affected by noise. The amount of noise is unknown, and it varies across the noisy channels from bad to severe. This is different from the data normally used by many studies, which are essentially clean data spiked with mild noise of known variance. The process starts by identifying which noisy channels to filter based on the level of the estimated noise in them. Then, filtering is conducted within each channel and across channels. Once the noise is removed, the improvement in signal-to-noise ratio (SNR) is calculated for each channel. The performance of Kalman, Wiener, Savitzky–Golay, wavelet, and cosine filters is tested in the same framework and the results are compared in terms of execution time, signal-to-noise ratio, and visual quality. The results show that the Kalman filter slightly outperformed the other filters. The proposed scheme was implemented using MATLAB R2023b running on an Intel i7 processor, and the average execution time was less than 1 second for each channel. To the best of our knowledge, this is the first attempt to filter real oil palm hyperspectral data containing speckle noise using a Kalman filter. This technique can be a useful tool to those working in the oil palm industry. [ABSTRACT FROM AUTHOR]

This study presents a method to enhance the contrast and luminosity of fundus images with boundary reflection. In this work, 100 retina images taken from online databases are utilized to test the performance of the proposed method. First, the red, green and blue channels are read and stored in separate arrays. Then, the area of the eye also called the region of interest (ROI) is located by thresholding. Next, the ratios of R to G and B to G at every pixel in the ROI are calculated and stored along with copies of the R, G and B channels. Then, the RGB channels are subjected to average filtering using a 3 × 3 mask to smoothen the RGB values of pixels, especially along the border of the ROI. In the background brightness estimation stage, the ROI of the three channels is filtered by binomial filters (BFs). This step creates a background brightness (BB) surface of the eye region by levelling the foreground objects like blood vessels, fundi, optic discs and blood spots, thus allowing the estimation of the background illumination. In the next stage, using the BB, the luminosity of the ROI is equalized so that all pixels will have the same background brightness. This is followed by a contrast adjustment of the ROI using CLAHE. Afterward, details of the adjusted green channel are enhanced using information from the adjusted red and blue channels. In the color correction stage, the intensities of pixels in the red and blue channels are adjusted according to their original ratios to the green channel before the three channels are reunited. The resulting color image resembles the original one in color distribution and tone but shows marked improvement in luminosity and contrast. The effectiveness of the approach is tested on the test images and enhancement is noticeable visually and quantitatively in greyscale and color. On average, this method manages to increase the contrast and luminosity of the images. The proposed method was implemented using MATLAB R2021b on an AMD 5900HS processor and the average execution time was less than 10 s. The performance of the filter is compared to those of two other filters and it shows better results. This technique can be a useful tool for ophthalmologists who perform diagnoses on the eyes of diabetic patients. [ABSTRACT FROM AUTHOR]