Search

The lateritic ore drying in the Cuban nickel producing industry is realized within flighted rotary dryers. In this investigation, performance indicators in regards to transfer of momentum, heat and mass were evaluated. The dryers operate in a concurrent configuration with combustion gas, at a productivity between 40 t h -1 and 50 t h -1 . The distribution function of the residence time (RTD) was best fitted to a model of a multi-branch tanks-in-series system, theoretical residence time was 51 ± 2 min and experimental mean residence time 61 min, at a rate of 45 t h -1 and hydraulic efficiency 1.23, due to the presence of dead-zoon. Mass and energy balance was made following a "black box" model, as results, the specific fuel consumption was 27.25 ± 0.25 kg fuel t -1 of wet ore, specific energy consumption 79.66 ± 0.95 kg fuel t -1 of H 2 O evaporated, energy efficiency 97.28 ± 0.01 %, thermal efficiency 66.88 ± 0.71 % and drying efficiency 98.77 ± 0.12 %. Mathematical modelling was made using a system of differential equations, the rate of drying in falling rate period was estimated by Arrhenius equation, then, temperature profile and ore moisture content along the dryer was simulated. The model provided a successful predictive performance; for an inlet gas temperature between 850 °C and 900 °C, the ore moisture was reduced form 33.0 % (wet basis) to a range depending on the dryer productivity, from 3.0 % to 7.1 %. Designing a computerized system that implements these algorithms can benefit on efficiency and productivity of the production plant., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Authors. Published by Elsevier Ltd.)

The main aim of this study is to figure out how well cryptand-2.2.1 (C 2.2.1) and cryptand-2.1.1 (C 2.1.1) macrocyclic compounds (MCs) work as novel extractants for scandium (Sc) by using an artificial neural network (ANN) models in MATLAB software. Moreover, C2.2.1 and C2.1.1 have never been evaluated to recover Sc. The independent variables impacting the extraction process (concentration of MC, concentration of Sc, pH, and time), and a nonlinear autoregressive network with exogenous input (NARX) and feed-forward neural network (FFNN) models were used to estimate their optimum values. The greatest obstacle in the selective recovery process of the REEs is the similarity in their physicochemical properties, specifically their ionic radius. The recovery of Sc from the aqueous solution was experimentally evaluated, then the non-linear relationship between those parameters was predictively modeled using (NARX) and (FFNN). To confirm the extraction and stripping efficiency, an atomic absorption spectrophotometer (AAS) was employed. The results of the extraction investigations show that, for the best conditions of 0.008 mol/L MC concentration, 10 min of contact time, pH 2 of the aqueous solution, and 75 mg/L Sc initial concentration, respectively, the C 2.1.1 and C 2.2.1 extractants may reach 99 % of Sc extraction efficiency. Sc was recovered from a multi-element solution of scandium (Sc), yttrium (Y), and lanthanum (La) under these circumstances. Whereas, at a concentration of 0.3 mol/L of hydrochloric acid, the extraction of Sc was 99 %, as opposed to Y 10 % and La 7 %. The Levenberg-Marquardt training algorithm had the best training performance with an mean-squared-error, MSE, of 5.232x10 -6 and 6.1387x10 -5 for C 2.2.1 and C 2.1.1 respectively. The optimized FFNN architecture of 4-10-1 was constructed for modeling recovery of Sc. The extraction process was well modeled by the FFNN with an R 2 of 0.999 for the two MC, indicating that the observed Sc recovery efficiency consistent with the predicted one., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Authors. Published by Elsevier Ltd.)

Several conventional methods are employed to remove numerous pollutants from oily wastewater discharged from oil-field activities. The purpose of this study is to use a new design of an electrocoagulation reactor (ECR) to treat oily wastewater effluents from the Al-Muthanna petroleum plant to minimize a Total Dissolved Solids (TDS) to levels suitable for employment. In a continuous ECR, a One-Sided-Finned cathode tube (1SF) made of aluminum was inserted between a pair of aluminum-cylindrical anodes. The effects of the electrolysis period (4-60 min), current density (0.63-5.0 mA/cm 2 ), and flow rate (50-150 ml/min) on Final TDS value were investigated. The increment of flow rate causes the final TDS value to be increased, while the extending of the electrolysis process and the raise in current density reduces it. The final TDS was 1842.54 mg/l (reduce by 307.46 mg/l) at optimum values of 1-h electrolysis, 5 mA/cm 2 current density, and 50 ml/min flow rate, with an inner anode consumption of 0.13 g and an outer anode consumption of 0.43 g. Regression models with a p-value of 0.001 and F-value of 27.01 noted that the selected model components were important, and the estimated model is considered prominent. Furthermore, the regression coefficient (R 2  = 97.99%) for the final TDS response revealed that the model fit the data well. This study confirmed the ability of the new electrocoagulation reactor to treat petroleum wastewater under significant conditions which overcomes the drawbacks of the conventional designs of electrocoagulation reactors., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Authors.)

In order to bring the chemical oxygen demand (COD) concentration down to safe levels for widespread use, this study plans to use a state-of-the-art electrocoagulation reactor (ECR) to treat real oily wastewater discharged from the Al-Muthanna petroleum refinery. A one-side finned (1SF) cathode tube was positioned between two tubular anodes in the continuous ECR, where the active area of the cathode was much more than its submerged volume. Each of these electrodes was made of aluminum and joined in a monopolar parallel to a DC power supply. On COD elimination efficiency, the impacts of operational parameters such as electrolysis time (4-60 min), current density (0.630-5.000 mA/cm 2 ), and flow rate (50-150 ml/min) were explored. In conclusion, Increasing current density and electrolysis duration increases COD removal efficiency, whereas increasing flow rate reduces it. COD removal efficiencies were 82% at optimal electrolysis times of 60 (min), 5 (mA/cm 2 ) current density, and 50 (ml/min) flow rate, with energy consumption of 4.787 (kWh/kg COD ) and electrode consumption of 0.544 (g). The investigation results demonstrated that the new reactor could treat oily wastewater within the specified operational limits. It might be used before other, more conventional treatments., (© 2023. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

This study examined >140 relevant publications from the last few years (2018-2021). In this study, classification was reviewed depending on the operation's progress. Electrocoagulation (EC), electrooxidation (EO), electroflotation (EF), electrodialysis (ED), and electro-Fenton (EFN) processes have received considerable attention. The type of action (individual or hybrid) for each electrochemical procedure was evaluated, and statistical analysis was performed to compare them as a new manner of reviewing cited papers providing a massive amount of information efficiently to the readers. Individual or hybrid operation progress of the electrochemical techniques is critical issues. Their design, operation, and maintenance costs vary depending on the in-situ conditions, as evidenced by surveyed articles and statistical analyses. This work also examines the variables affecting the elimination efficacy, such as the applied current, reaction time, pH, type of electrolyte, initial pollutant concentration, and energy consumption. In addition, owing to its efficacy in removing toxins, the hybrid activity showed a good percentage among the studies reviewed. The promise of each wastewater treatment technology depends on the type of contamination. In some cases, EO requires additives to oxidise the pollutants. EF and EFN eliminated lightweight organic pollutants. ED has been used to treat saline water. Compared to other methods, EC has been extensively employed to remove a wide variety of contaminants., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. Dr. P. Cuong Le would like to thanks the Ministry of Education and Training of Vietnam with project B2022-DNA-04., (Copyright © 2023 Elsevier B.V. All rights reserved.)

A new configuration of aluminum electrodes has been performed in an electrocoagulation reactor (ECR) to remove toxic metals from synthetic wastewater. The ECR contains four concentric-cubic electrodes that were connected to the DC power supply with a bipolar mode. The ability of this reactor to eliminate 200 ppm Pb, 200 ppm Cd and 200 ppm Cu from wastewater was investigated under the effect of pH (4-10), applied current (0.2-2.6 A), and the reaction time of (4-60 min). Two grams of NaCl were added to each experiment to enhance the electrical conductivity and minimize the passivation of cathode surfaces. The experiments, analysis, and optimization were conducted using response surface methodology type Box-Behnken design (RSM-BBD) and the Minitab-statistical software program. The highest elimination of heavy metals was: Pb-99.73%, Cd-98.54%, and Cu-98.92% at pH 10, 1.4 A of the applied current, and 60 min of the reaction time. The total real consumption of anodes under these conditions was 0.55 g, and the energy consumption was 12.71 kWh/m3. All reactions of metal removal that occurred in the present EC reactor obey the kinetic of a first-order reaction. Thermodynamics parameters of present electrocoagulation removal of heavy metals indicate an endothermic, spontaneous nature, and random irregularity at the liquid-solid interaction. The highest values of removal efficiencies and the considerably lowest values of energy and electrode consumption proved that the electrocoagulation technology applies in wastewater treatment containing toxic metals.•The anode electrodes were perforated to decrease the amount of electrode consumption, while the cathode electrodes were not perforated.•The new EC reactor eliminated Pb-99.73%, Cd-98.54%, and Cu-98.92% of 200 mg/l of each metal at pH 10, applied current of 1.4 A, and reaction time of 60 min. Moreover, the consumption of energy and electrodes was significantly low.•The performance indicator (R 2 ) of the studied responses was higher than 0.95., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2022 The Author(s).)

Considerable amounts of domestic and industrial wastewater that should be treated before reuse are discharged into the environment annually. Electrocoagulation is an electrochemical technology in which electrical current is conducted through electrodes, it is mainly used to remove several types of wastewater pollutants, such as dyes, toxic materials, oil content, chemical oxygen demand, and salinity, individually or in combination with other processes. Electrocoagulation technology used in hybrid systems along with other technologies for wastewater treatment are reviewed in this work, and the articles reviewed herein were published from 2018 to 2021. Electrocoagulation is widely employed in integrated systems with other electrochemical technologies or conventional methods for effective removal of different pollutants with less cost and sometimes over shorter durations of operation. It has also been observed that the hybrid effects besides increasing the removal efficiency can overcome the disadvantages of using electrocoagulation alone, such as less sludge formation, high cost of operation and increased life of the used electrodes, and stable flux of water with longer periods of operation. More than 20 types of other technologies have been combined efficiently with electrocoagulation., (Copyright © 2022 Elsevier Inc. All rights reserved.)

The present work provides to treat real oily saline wastewater released from drilling oil sites by the use of electrocoagulation technique. Aluminum tubes were utilized as electrodes in a concentric manner to minimize the concentrations of 113400 mg TDS/L, 65623 mg TSS/L, and the ions of 477 mg HCO 3 /L, 102000 mg Cl/L and 5600 mg Ca/L presented in real oily wastewater under the effect of the operational parameters (the applied current and reaction time) by making use of the central composite rotatable design. The final concentrations of TDS, TSS, HCO 3 , Cl, and Ca that obtained were 93555 ppm (17.50%), 11011 ppm (83.22%), 189ppm (60.38%), 80000ppm (22%), and 4200 ppm (25%), respectively, under the optimum values of the operational parameters (1.625 Amps and 40 min). In spite of the low removal percentages of some pollutants, the present study proved the ability of this novel designed reactor for treating high saline real oily wastewater in accordance with the operational parameters. This prove the capability of the use of it as a pre-treatment of other conventional methods., (© 2020 The Author.)

Energy consumed by the electrochemical treatment of wastewater has more responsibility in designing such a process. The objective of the present study was to investigate the effect of electrodes geometry used in the electrocoagulation cell on the operating cost that required to remove lead from the industrial wastewater. The studied operating variables in the present study were the initial concentration of lead (10-300)ppm, electrolysis time (5-60)minutes, applied electric current (0.5-2.5)Amps., pH (2-12), and stirring speed (0-300)rpm. It has shown that cost was affected by the configuration of aluminum electrodes as well as other studied parameters. Statistical methods and programs were used to estimate an empirical correlation of the operating cost as well as the consumption of aluminum electrodes and energy.