Search

Air pollution is a growing concern in rural areas where agricultural production can be reduced by it. This article analyses data obtained as part of a research project. The aim of this study is to understand the influence of atmospheric pressure, air temperature, air relative humidity, longitude and latitude of the location, and indoor and outdoor environment on local rural workplace diversity of air pollutants such as carbon monoxide (CO) and suspended particulate matter (SPM), as well as the contribution of these variables to changes in such air pollutants. The focus is on four topics: motivation, innovation and creativity, leadership, and social responsibility. Furthermore, this study developed an artificial neural network (ANN) model to predict CO and SPM concentrations in the air based on data collected from the mentioned inputs. The related sensors were assembled on an Arduino Mega 2560 board to form a field-portable device to detect air pollutants and meteorological parameters. The sensors included an MQ7 sensor for CO concentration measurement, a Sharp GP2Y1010AU0F dust sensor for SPM concentration measurement, a DHT11 sensor for air temperature and air relative humidity measurement, and a BMP180 sensor for air pressure measurements. The longitude and latitude of the location were measured using a smartphone. Measurements were conducted from 20 December 2021 to 16 July 2022. Results showed that the overall average outdoor CO and SPM concentrations were 10.97 ppm and 231.14 μg/m3 air, respectively. The overall average indoor concentrations were 12.21 ppm and 233.91 μg/m3 air for CO and SPM, respectively. Results showed that the ANN model demonstrated acceptable performance in predicting CO and SPM in both the training and testing phases, exhibiting a coefficient of determination (R2) of 0.575, a root mean square error (RMSE) of 1.490 ppm, and a mean absolute error (MAE) of 0.994 ppm for CO concentrations when applying the testing dataset. For SPM concentrations, the R2, RMSE, and MAE using the test dataset were 0.497, 30.301 μg/m3 air, and 23.889 μg/m3 air, respectively. The most influential input variable was air pressure, with contribution rates of 22.88% and 22.82% in predicting CO and SPM concentrations, respectively. The acceptable performance of the developed ANN model provides potential advances in air quality management and agricultural planning, enabling a more accurate and informed decision-making process regarding air pollution. The results of short-term estimation of CO and SPM concentrations suggest that the accuracy of the ANN model needs to be improved through more comprehensive data collection or advanced machine learning algorithms to improve the prediction results of these two air pollutants. Moreover, as even lower cost devices can predict CO and SPM concentrations, this study could lead to the development some kind of virtual sensor, as other air pollutants can be estimated from measurements of particulate matters. [ABSTRACT FROM AUTHOR]

One of the key factors for sustainability in agricultural systems, particularly, for cultivation of date palms, is the identification of the performance parameters of the pollen grains of male date palms (Phoenix dactylifera L.). This study was carried out to predict the performance parameters of pollen grains using an artificial neural network (ANN) model. The morphological features of spathe length, spathe weight, number of pinnae per leaf, leaf length, leaf width, length of the pinna part, pinna length, pinna width, length of the spathe stem, and spathe width, as well as the concentrations of minerals such as Mg, N, K, P, and Ca in their leaves were used as inputs to the ANN model. For this purpose, we collected the required data from nine male date palms grown in Saudi Arabia. The ANN model utilized in this work included an input layer with 15 parameters, a hidden layer of 30 neurons, and an output layer with 8 neurons. The ANN model was trained with 27 patterns. Seven patterns were utilized for testing purposes. The coefficient of determination (R2) obtained between the observed and predicted performance parameters' values using the testing dataset was 0.902 for the number of strands per spathe, 0.967 for strand length, 0.963 for the number of flowers per strand, 0.941 for the number of flowers per spathe, 0.985 for the weight of pollen grains per spathe, 0.810 for the pollen grains' viability, 0.936 for the pollen grains' length, and 0.992 for the pollen grains' width. The length of the spathe stem had the most critical effect on how the ANN model predicted the values of the dependent variables, i.e., the number of strands per spathe, with a percentage of contribution of 17.66%; the weight of pollen grains per spathe, with 17.85%; the pollen grains' length, with 19.78%, and the pollen grains' width, with a percentage of contribution of 30.59%. Spathe weight had the most critical influence on strand length and pollen grains' viability, with percentages of 26.29% and 14.92%, respectively. Leaf width had the most critical effect on the number of flowers per spathe, with a percentage of 12.55%. The elemental concentration of K in the male date palm leaves had the most critical effect on the number of flowers per strand, with a percentage of 13.98%. It was therefore concluded that using a modeling process with the ANN technique can help estimate the performance parameters of male date palms' pollen grains for different purposes, such as providing a starting point for mathematical analyses associated with the physiological mechanisms of male date palm. Moreover, the outcomes of this research work can be supportive as a practical tool in this field of study. [ABSTRACT FROM AUTHOR]

Agricultural sustainability is dependent on the ability to predict crop yield, which is vital for farmers, consumers, and researchers. Most of the works used the amount of rainfall, average monthly temperature, relative humidity, etc. as inputs. In this paper, an attempt was made to predict the yield of the citrus crop (Washington Navel orange, Valencia orange, Murcott mandarin, Fremont mandarin, and Bearss Seedless lime) using weather factors and the accumulated heat units. These variables were used as input parameters in an artificial neural network (ANN) model. The necessary information was gathered during the growing seasons between 2010/2011 and 2021/2022 under Egyptian conditions. Weather factors were daily precipitation, yearly average air temperature, and yearly average of air relative humidity. A base air temperature of 13.0 °C was used to determine the accumulated heat units. The heat use efficiency (HUE) for cultivars was determined. The Bearss Seedless lime had the lowest HUE of 9.5 kg/ha °C day, while the Washington Navel orange had the highest HUE of 20.2 kg/ha °C day. The predictive performance of the ANN model with a structure of 9-20-1 with the backpropagation was evaluated using standard statistical measures. The actual and estimated yields from the ANN model were compared using a testing dataset, resulting in a value of RMSE, MAE, and MAPE of 2.80 t/ha, 2.58 t/ha, and 5.41%, respectively. The performance of the ANN model in the training phase was compared to multiple linear regression (MLR) models using values of R2; for MLR models for all cultivars, R2 ranged between 0.151 and 0.844, while the R2 value for the ANN was 0.87. Moreover, the ANN model gave the best performance criteria for evaluation of citrus yield prediction with a high R2, low root mean squared error, and low mean absolute error compared to the performance criteria of data mining algorithms such as K-nearest neighbor (KNN), KStar, and support vector regression. These encouraging outcomes show how the current ANN model can be used to estimate fruit yields, including citrus fruits and other types of fruit. The novelty of the proposed ANN model lies in the combination of weather parameters and accumulated heat units for accurate citrus yield prediction, specifically tailored for Egyptian regional citrus crops. Furthermore, especially in low- to middle-income countries such as Egypt, the findings of this study can greatly enhance the reliance on statistics when making decisions regarding agriculture and climate change. The citrus industry can benefit greatly from these discoveries, which can help with optimization, harvest planning, and postharvest logistics. We recommended furthering proving the robustness and generalization ability of the results in this study by adding more data points. [ABSTRACT FROM AUTHOR]

Research on the quality of the air in rural areas is essential for determining base emissions of air pollutants, evaluating the effects of dust pollutants particular to rural areas, modeling the dispersion of pollutants, and developing appropriate pollution mitigation systems. The absence of a systematic review based on the assessment of air quality levels in agricultural settings based on integrated weather variables and air pollutants in the literature draws attention to the deficiencies and the necessity of further research in this area. Hence, our study aimed to develop an Arduino monitoring system with related sensors to acquire some air pollutants and weather parameters. Additionally, we proposed an innovative solution to compare air quality levels by suggesting a new criterion called an integrated indicator for air quality assessment (IAQA). It was created based on the weighted average method to combine the investigated air pollutants and weather parameters. This criterion was evaluated while conducting field measurements in 29 environmentally different agricultural regions located within the Kingdom of Saudi Arabia. To determine the integrated indicator, all the values of the variables were normalized between 0 and 1. The agricultural setting with the lowest integrated indicator was the best environmentally. The lowest and highest values of the integrated indicator ranged from 37.03% and 66.32%, respectively, with an arithmetic average of 48.24%. The developed criterion can change its value depending on the change in the weight value of the variables involved, and it is suitable for application to any other agricultural or non-agricultural setting to evaluate the pollution level in the air. Although similar research has been published, this paper presents novelty findings based on integrated values of air pollutants and weather variables for defining a new criterion called IAQA. Additionally, this paper presents original results for air pollutants and weather aspects in different agricultural settings. [ABSTRACT FROM AUTHOR]