Search

The biggest concerns confronting the modern world are the depletion of nonrenewable energy sources and rising global temperatures. The use of O2 as an alternative energy source offers a potential answer to these problems. Low-cost electrocatalysts are growing approach for electrocatalytic water splitting, such as oxygen evolution reaction (OER). Oxygen evolution reactions are tremendously well-catalyzed by inexpensive transition metal oxide-based nanostructures. Here, we present a new composite NiO/CuFe2O4 nanostructure and further investigate its potential for electrocatalytic OER applications. Microscopic and spectroscopic methods such as FE-SEM, XRD, XPS, and FTIR were utilized to explore the morphology and structural characteristics of the electrocatalyst. The composite NiO/CuFe2O4 catalyst demonstrates excellent electrochemical OER accomplishment with the overpotential of 297 mV for an alkaline medium to acquire the current density of 10 mA/cm2 and a low Tafel slope of 63 mV/dec−1 to confirm the faster reaction of the composite catalyst. The synergism between the metal ions Ni, Cu, and Fe makes the composite catalyst more efficient in its catalytic activity so; the as-prepared structure demonstrates higher electrocatalytic OER execution with cyclic stability and durability than its pristine constituents. The results show that the NiO/CuFe2O4 composite has the potential to act as an electrocatalyst for the splitting of water. [ABSTRACT FROM AUTHOR]

Methylene blue (MB) dye is a common colorant used in numerous industries, particularly the textile industry. When methylene blue is discharged into water bodies without being properly treated, it may seriously damage aquatic and human life. As a result, a variety of methods have been established to remove dyes from aqueous systems. Thanks to their distinguishing features e.g., rapid responsiveness, cost-effectiveness, potential selectivity, portability, and simplicity, the electrochemical methods provided promising techniques. Considering these aspects, a novel quartz crystal microbalance nanosensors based on green synthesized magnesium ferrite nanoparticles (QCM-Based MgFe2O4 NPs) and magnesium ferrite nanoparticles coated alginate hydrogel nanocomposite (QCM-Based MgFe2O4@CaAlg NCs) were designed for real-time detection of high concentrations of MB dye in the aqueous streams at different temperatures. The characterization results of MgFe2O4 NPs and MgFe2O4@CaAlg NCs showed that the MgFe2O4 NPs have synthesized in good crystallinity, spherical shape, and successfully coated by the alginate hydrogel. The performance of the designed QCM-Based MgFe2O4 NPs and MgFe2O4@CaAlg NCs nanosensors were examined by the QCM technique, where the developed nanosensors showed great potential for dealing with continuous feed, very small volumes, high concentrations of MB, and providing an instantaneous response. In addition, the alginate coating offered more significant attributes to MgFe2O4 NPs and enhanced the sensor work toward MB monitoring. The sensitivity of designed nanosensors was evaluated at different MB concentrations (100 mg/L, 400 mg/L, and 800 mg/L), and temperatures (25 °C, 35 °C, and 45 °C). Where a real-time detection of 400 mg/L MB was achieved using the developed sensing platforms at different temperatures within an effective time of about 5 min. The results revealed that increasing the temperature from 25 °C to 45 °C has improved the detection of MB using the MgFe2O4@CaAlg NCs nanosensor and the MgFe2O4@CaAlg NCs nanosensor exhibited high sensitivity for different MB concentrations with more efficiency than the MgFe2O4 NPs nanosensor. [ABSTRACT FROM AUTHOR]

In this study, rosemary leaf extract was effectively used to synthesize cobalt oxide nanoparticles (Co3O4 NPs) using a rapid, low-cost, and environmentally friendly approach. The prepared Co3O4 NPs were examined using various analytical techniques. However, UV spectrum analysis displayed two sharp absorption peaks at ~350 and 745 nm. The dynamic light scattering and zeta potential measurements were used to evaluate the particle size and the effective stabilization of the synthetic nanoparticles in the suspensions. A semi-triangular pyramidal shape of the Co3O4 NPs with a wide particle-size distribution could be observed in the scanning electron microscopy images. The energy-dispersive X-ray spectrum confirmed their successful synthesis, as the experimental atomic percentages agreed with the theoretical values. Moreover, X-ray diffraction analysis revealed that the synthesized Co3O4 NPs had a cubic crystalline structure corroborating that of theoretical Co3O4. Additionally, the Co3O4 NPs were not toxic at ≤62.5 µg/mL for Hep G2 and at ≤31.25 µg/mL for Mcf7. Therefore, these unique environmentally friendly Co3O4 NPs at this safe concentration could be studied in the future for their therapeutic activity. [ABSTRACT FROM AUTHOR]

Pb(II) is a significant contaminant that is known to have negative effects on both humans and animals. Recent industrial operations have exacerbated these consequences, and their release of several contaminants, including lead ions, has drawn attention to the potential effects on human health. Therefore, there is a lot of interest in the rapid, accurate, and selective detection of lead ions in various environmental samples. Sensors-based nanomaterials are a significant class among the many tools and methods developed and applied for such purposes. Therefore, a novel green synthesized cobalt ferrite (CoFe2O4) nanoparticles and functionalized CoFe2O4/Ca-alginate nanocomposite was designed and successfully synthesized for the fabrication of nanoparticles and nanocomposite-coated quartz crystal microbalance (QCM) nanosensors to detect the low concentrations of Pb(II) ions in the aqueous solutions at different temperatures. The structural and morphological properties of synthesized nanoparticles and nanocomposite were characterized using different tools such as X-ray diffraction (XRD), N2 adsorption–desorption isotherm, dynamic light scattering (DLS), zeta potential analyzer (ζ-potential), atomic force microscopy (AFM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDX). The QCM results revealed that the green synthesized CoFe2O4 nanoparticles and functionalized CoFe2O4/Ca-alginate nanocomposite-coated QCM nanosensors exhibited high sensitivity, stability, and rapid detection of Pb(II) ions in the aqueous solutions at different temperature. The lowest detection limit for Pb(II) ions in the aqueous solutions could reach 125 ng, which resulted in a frequency shift of 27.49 ± 0.81, 23.63 ± 0.90, and 19.57 ± 0.86 Hz (Δf) for the QCM detector coated with green synthesized CoFe2O4 nanoparticles thin films, and 25.85 ± 0.85, 33.87 ± 0.73, and 6.87 ± 0.08 Hz (Δf) for the QCM detector coated with CoFe2O4/Ca-Alg nanocomposite thin films in a real-time of about 11, 13, and 13 min at 25 °C, 35 °C, and 45 °C, respectively. In addition, the resonance frequency change results showed the superiority of functionalized CoFe2O4/Ca-alginate nanocomposite coated QCM nanosensor over CoFe2O4 nanoparticles towards Pb(II) ions detecting, which attributed to the beneficial properties of alginate biopolymer. [ABSTRACT FROM AUTHOR]

Magnetite Fe3O4 and spinel (2:1) and (4:1) NiFe2O4 magnetic nanoparticles (MNPs) were prepared by simple and affordable co-precipitation methods using an extract of star anise (Illicium verum) as a green reducing agent. The morphology and chemical composition of these MNPs were confirmed by field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, UV–visible spectroscopy, and X-ray diffraction (XRD). The synthesized magnetite Fe3O4 and spinel (2:1) and (4:1) NiFe2O4 MNPs were in the size range of 0.1–1 µm. The MNPs had irregular clustered platelets (magnetite Fe3O4) and pyramidal structures (spinel (2:1) and (4:1) NiFe2O4 NPs). The average sizes of the synthesized magnetite Fe3O4, and spinel (2:1) and (4:1) NiFe2O4 MNPs calculated using XRD analysis were 66.8, 72.5, and 72.9 nm, respectively. In addition to the characteristic absorption peaks of magnetite Fe3O4, those of spinel (2:1) and (4:1) NiFe2O4 MNPs were detected at ~300–350 nm and ~700 nm, respectively. Overall, the results of this study indicate that the synthesized magnetite Fe3O4, and spinel (2:1) and (4:1) NiFe2O4 MNPs showed high biomedical activities against liver carcinoma cells and non-small lung adenocarcinoma cells. [ABSTRACT FROM AUTHOR]