Search

Background: Complex fractionated atrial electrogram (CFAE)-targeted catheter ablation (CFAE ablation) requires a high rate of atrial fibrillation (AF) termination to provide good outcomes. We determined the optimal settings of CFAE software. Methods: In our 430 consecutive patients, AF was terminated in 97 (234/242) and 79% (149/188) of patients with paroxysmal and persistent AF, respectively, by CFAE ablation combined with (31%) or without (69%) pulmonary vein isolation, occasionally with nifekalant infusion. We analyzed 109 consecutive patients who underwent CFAE ablation to determine the optimal settings for comparing subjective versus objective decisions by the CFAE software on CARTO3. We compared three settings: the default setting (0.05–0.15 mV, 50–120 ms) and two modified settings (#1: 0.05–0.30 mV, 40–70 ms, #2: 0.05–0.13 mV, 10–20 ms). We retrospectively analyzed 11,425 points during left atrial mapping before ablation and 10,306 points that were subjectively detected and ablated as CFAE points. An interval confidence level ≥6 denoted a site with CFAE. Results: With the default setting, the accuracy, sensitivity, specificity, positive productive value, and negative productive values were 67, 42, 77, 48, and 73%, respectively. With modified setting #1, the values were 78, 55, 87, 74, and 77%, respectively, versus 64, 82, 60, 53, and 91%, respectively, for modified setting #2. Conclusion: These data suggest that setting #1 was generally superior to the default setting, whereas setting #2 was optimal for excluding areas not requiring ablation. The optimal CFAE software setting was a voltage of 0.05–0.30 mV and an interval parameter of 40–70 ms.

Purpose: In this study, we developed in-house software to evaluate the effect of the lead block (LB)-inserted spacer on the mandibular dose in interstitial brachytherapy (ISBT) for tongue cancer. In addition, an inverse planning algorithm for LB attenuation was developed, and its performance in mandibular dose reduction was evaluated., Methods: Treatment plans of 30 patients with tongue cancer treated with ISBT were evaluated. The prescribed dose was 54 Gy/9 fractions. An in-house software was developed to calculate the dose distribution based on the American Association of Physicists in Medicine (AAPM) Task Group No.43 (TG-43) formalism. The mandibular dose was calculated with consideration of the LB attenuation. The attenuation coefficient of the lead was computed using the PHITS Monte Carlo simulation. The software further optimized the treatment plans using an attraction-repulsion model (ARM) to account for the LB attenuation., Results: Compared to the calculation in water, the D 2 cc of the mandible changed by - 2.4 ± 2.3 Gy (range, - 8.6 to - 0.1 Gy) when the LB attenuation was considered. The ARM optimization with consideration of the LB resulted in a - 2.4 ± 2.4 Gy (range, - 8.2 to 0.0 Gy) change in mandibular D 2 cc ., Conclusions: This study enabled the evaluation of the dose distribution with consideration of the LB attenuation. The ARM optimization with lead attenuation further reduced the mandibular dose., (© 2023. The Author(s).)

Background/aim: Stereotactic body radiotherapy for prostate cancer using CyberKnife with circular cone requires a long treatment time. Raster scanning intensity modulated radiotherapy (RS-IMRT) has a potential of improving treatment efficacy, introducing shorter treatment time, better target dose uniformity, and lower organ at risk (OAR) dose. The purpose of the study was to develop a fluence optimization system for RS-IMRT., Patients and Methods: RS-IMRT plans were created for five prostate cancer patients treated with the Novalis system and parameters were compared to the Novalis treatment plans. From 80 nodes available for the CyberKnife, twelve nodes were arbitrarily selected. On the beam's eye view of each beam, a 100×100 matrix of optimization points was created at the target center plane. The beam fluence map was optimized using the attraction-repulsion model (ARM). The beam fluence maps were converted to the scanning sequence using the ARM and a final dose calculation was performed., Results: For planning target volume (PTV), RS-IMRT plans showed higher dose covering 2% of the volume (D 2% ) and lower D 98% compared to the Novalis plans. However, the homogeneity was within our Institutional clinical protocol. The RS-IMRT plans showed significantly lower OAR dose parameters including bladder volume receiving 100% of prescribed dose (V 100% ) and dose delivered to 5 cm 3 of rectum (D 5 cc )., Conclusion: We developed a fluence optimization system for RS-IMRT that performs the entire RS-IMRT treatment planning process, including scanning sequence optimization and final dose calculation. The RS-IMRT was capable of generating clinically acceptable plans., (Copyright © 2023 International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.)

Background/aim: Lung and liver tumor dose coverage was evaluated for the CyberKnife synchrony respiratory tracking system (SRTS) with consideration of the motion tracking accuracy measured for motion patterns of individual patients., Patients and Methods: Seven treatment plans of six cases treated with the SRTS were evaluated. The motion phantom was moved with the motion data derived from the treatment log files. A laser emitted from the linac head to the moving phantom block was recorded with a webcam, and the tracking accuracy was evaluated. The dose volume histogram (DVH) of planning target volume (PTV) and gross tumor volume (GTV) were calculated by a pencil beam algorithm with shifting the beams with Gaussian random numbers mimicking the measured tracking errors., Results: The tracking errors measured with the motion phantom in the lateral direction were within ±2 mm for 90% of beam-on time. The tracking errors in the longitudinal direction were within ±3.0 mm and ±1.1 mm for 90% and 50% of beam-on time, respectively. Although one case showed a decrease in the dose covering 95% of PTV (D 95% ) by 1.8%, the change in the dose covering 99% of GTV (D 99% ) was within 1%., Conclusion: This study evaluated the motion tracking errors of the SRTS by a motion phantom moved with the patients' respiration signal, and the impact of the tracking errors on the target coverage was calculated. Even for respiratory patterns with large maximum tracking errors, sufficient GTV coverage is achievable if the beam is accurately delivered for high percentage of beam-on time., (Copyright © 2023 International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.)

Background/aim: This study evaluated the effects of the respiratory phase shifts between liver tumor and chest wall motions on the dose distribution for the CyberKnife Synchrony respiratory tracking system (SRTS)., Patients and Methods: Eight patients who received stereotactic body radiotherapy for hepatocellular carcinoma or liver metastases were analyzed. Three-dimensional (3D) motion of the implanted fiducial markers and vertical motion of the sternal bone were derived from the four-dimensional computed tomography (4D-CT) images acquired with a 320-row area detector CT. For each patient, Gaussian random numbers were generated for the standard deviation of the tracking error calculated from the phase shift and a literature. For each voxel of the target, the dose delivered from each beam was calculated 100 times with the random 3D offsets representing the tracking error., Results: The median respiratory phase shifts were 6.0% and 4.6% for the anterior-posterior (AP) and superior-inferior (SI) directions, respectively. The median motion tracking errors influenced by respiratory phase shifts were 1.21 mm and 0.96 mm for the AP and SI directions, respectively. The change in the dose covering 90% of the target (D 90% ) was within 1.1% when median phase shifts were considered. When evaluating the 90 th percentile of the phase shifts, the D 90% decreased up to 6.6%., Conclusion: We have developed a technique to estimate the impact of the respiratory phase shifts on the dose distribution of a liver tumor treated with the SRTS. The calculation of the respiratory phase shifts from the area-detector 4D-CT will be valuable to improve the tracking accuracy of the SRTS., (Copyright © 2022, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.)

Background/aim: This study aimed to evaluate the treatment outcomes of radiation therapy (RT) for localized prostate cancer in elderly patients aged ≥75 years., Patients and Methods: We retrospectively investigated data of patients aged ≥75 years with prostate cancer who underwent intensity-modulated radiation therapy (IMRT) or volumetric modulated arc therapy (VMAT) with doses of 70-78 Gy in 35-39 fractions between September 2008 and June 2016. Overall survival (OS), recurrence-free (RF) rates, and occurrence rates of toxicities were calculated., Results: Eighty-eight patients were enrolled in the study. Nineteen patients died, and nine patients reported PSA failure within the follow-up period. The median follow-up time was 83.5 months. The median age was 77 years. In the cohort, 6 were low-risk, 36 were intermediaterisk, and 46 were high-risk patients. The 5-/7-year OS and RF rates were 87.9%/80.2% and 93.5%/89.1%, respectively. By risk, the 5-/7-year RF rates were 100%/80% in the low-, 100%/100% in the intermediate-, and 87.6%/82.7% in the high-risk groups, respectively. The cumulative incidence rates of Grade ≥3 genitourinary and gastrointestinal toxicities were 1.3% and 3.5% at 5 years and 3.3% and 3.5% at 7 years, respectively., Conclusion: IMRT and VMAT are effective treatment options for elderly patients with prostate cancer and in a good general condition., (Copyright © 2022 International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.)

Purpose: Low-energy virtual monochromatic images (VMIs) derived from dual-energy computed tomography (DECT) systems improve lesion conspicuity of head and neck cancer over single-energy CT (SECT). However, DECT systems are installed in a limited number of facilities; thus, only a few facilities benefit from VMIs. In this work, we present a deep learning (DL) architecture suitable for generating pseudo low-energy VMIs of head and neck cancers for facilities that employ SECT imaging., Methods: We retrospectively analyzed 115 patients with head and neck cancers who underwent contrast enhanced DECT. VMIs at 70 and 50 keV were used as the input and ground truth (GT), respectively. We divided them into two datasets: for DL (104 patients) and for inference with SECT (11 patients). We compared four DL architectures: U-Net, DenseNet-based, and two ResNet-based models. Pseudo VMIs at 50 keV (pVMI 50keV ) were compared with the GT in terms of the mean absolute error (MAE) of Hounsfield unit (HU) values, peak signal-to-noise ratio (PSNR), and structural similarity (SSIM). The HU values for tumors, vessels, parotid glands, muscle, fat, and bone were evaluated. pVMI 50keV were generated from actual SECT images and the HU values were evaluated., Results: U-Net produced the lowest MAE (13.32 ± 2.20 HU) and highest PSNR (47.03 ± 2.33 dB) and SSIM (0.9965 ± 0.0009), with statistically significant differences (P < 0.001). The HU evaluation showed good agreement between the GT and U-Net. U-Net produced the smallest absolute HU difference for the tumor, at < 5.0 HU., Conclusion: Quantitative comparisons of physical parameters demonstrated that the proposed U-Net could generate high accuracy pVMI 50keV in a shorter time compared with the established DL architectures. Although further evaluation on diagnostic accuracy is required, our method can help obtain low-energy VMI from SECT images without DECT systems., (© 2022. CARS.)

Purpose: Poly (ADP-ribose) polymerase inhibitors (PARPi) are known to induce radiosensitization. However, the exact mechanisms of radiosensitization remain unclear. We previously reported that PARPi may have a unique radiosensitizing effect to enhance β-components of the linear-quadratic model. The aim of this study was to evaluate PARPi in combination with high-dose-per-fraction radiotherapy and to elucidate the underlying mechanisms of its radiosensitization., Materials and Methods: Radiosensitizing effects of PARPi PJ34, olaparib, and veliparib were measured using a colony-forming assay in the human cancer cell lines, HCT116, NCI-H460, and HT29. Six different radiation dose fractionation schedules were examined by tumor regrowth assay using three-dimensional multicellular spheroids of HCT116, NCI-H460, SW620, and HCT15. The mechanisms of radiosensitization were analyzed by measuring DNA double-strand breaks (DSB), DNA damage responses, chromosomal translocations, cellular senescence, and cell cycle analysis., Results: Olaparib and PJ34 were found to show radiosensitization preferentially at higher radiation doses per fraction. Similar results were obtained using a mouse model bearing human tumor xenografts. A kinetic analysis of DNA damage responses and repairs showed that olaparib and PJ34 reduced the homologous recombination activity. However, a neutral comet assay showed that PJ34 treatment did not affect the physical rejoining of DNA-DSBs induced by ionizing radiation. Cell cycle analysis revealed that olaparib and PJ34 strikingly increased G1 tetraploid cells following irradiation, leading to premature senescence. The C-banding analysis of metaphase spreads showed that olaparib and PJ34 significantly increased ionizing radiation-induced dicentric chromosomes. The data suggests that PARPi olaparib and PJ34 altered the choice of DNA-DSB repair pathways rather than reducing the total amount of DNA-DSB repair, which resulted in increased repair errors. Increased quadratic misrepair was one of the mechanisms of PARP-mediated radiosensitization, preferentially at the higher dose range compared to the lower dose range., Conclusion: PARPi may be a promising candidate to combine with stereotactic hypofractionated radiotherapy, aiming at high-dose region-directed radiosensitization.

A microSilicon™ (PTW type 60023), a new unshielded diode detector succeeding Diode E (model 60017, PTW), was characterized for electron beam dosimetry and compared with other detectors. Electron beams generated from a TrueBeam linear accelerator were measured using the microSilicon, Diode E, and microDiamond synthetic single-crystal diamond detector. Positional accuracy of microSilicon was measured by data collected in air and water. The percent depth dose (PDD), off-center ratio (OCR), dose-response linearity, dose rate dependence, and cone factors were evaluated. The PDDs were compared with data measured using a PPC40 plane-parallel ionization chamber. The maximum variations of depth of 50% and 90% of the maximum dose, and practical depth among all detectors and energies were 0.9 mm. The maximum variations of the bremsstrahlung dose among all detectors and energies were within 0.3%. OCR showed good agreement within 1% for the flat and tail regions. The microSilicon detector showed a penumbra width similar to microDiamond, whereas Diode E showed the steepest penumbra shape. All detectors showed good dose-response linearity and stability against the dose rate; only Diode E demonstrated logarithmic dose rate dependency. The cone factor measured with microSilicon was within ±1% for all energies and cone sizes. We demonstrated that the characteristics of microSilicon is suitable for electron beam dosimetry. The microSilicon detector can be a good alternative for electron beam dosimetry in terms of providing an appropriate PDD curve without corrections, high spatial resolution for OCR measurements and cone factors., (© The Author(s) 2021. Published by Oxford University Press on behalf of The Japanese Radiation Research Society and Japanese Society for Radiation Oncology.)

The purpose of this study was to evaluate the effect of dose rate to the rectum on late rectal complications in patients treated with computed tomography (CT)-based image-guided brachytherapy (IGBT) for cervical cancer. The subjects were 142 patients with cervical cancer who underwent Ir-192 high-dose-rate (HDR)-IGBT between March 2012 and January 2018. The dose rate to the rectum was calculated using in-house software. The minimum, mean and maximum effective dose rate (EDR) was calculated for voxels of the rectal volume covered by cumulative doses >D0.1cc, >D2cc, and > D5cc. The average EDR of three to four brachytherapy sessions was calculated (EDR for patients; EDRp). The total dose of the rectum was calculated as the biologically equivalent dose in 2-Gy fractions (EQD2). The associations between EDRp for D0.1cc, D2cc, and D5cc and the respective rectal EQD2 values with late rectal complications were then analyzed. The median follow-up period was 40 months. Patients with rectal complications of ≥Grade 1 received a significantly higher mean EDRp for D0.1cc-5cc and had a greater EQD2 for D0.1cc-5cc. Multivariate analysis was performed using the mean EDRp for D2cc, EQD2 for D2cc, heavy smoking and BMI. Of these four variables, mean EDRp for D2cc (HR = 3.38, p = 0.004) and EQD2 for D2cc (HR = 2.59, p = 0.045) emerged as independent predictors for late rectal complications. In conclusion, mean EDRp and EQD2 were associated with late rectal complications in patients treated with HDR CT-based IGBT for cervical cancer., (© The Author(s) 2021. Published by Oxford University Press on behalf of The Japanese Radiation Research Society and Japanese Society for Radiation Oncology.)

Purpose: To construct a deep convolutional neural network that generates virtual monochromatic images (VMIs) from single-energy computed tomography (SECT) images for improved pancreatic cancer imaging quality., Materials and Methods: Fifty patients with pancreatic cancer underwent a dual-energy CT simulation and VMIs at 77 and 60 keV were reconstructed. A 2D deep densely connected convolutional neural network was modeled to learn the relationship between the VMIs at 77 (input) and 60 keV (ground-truth). Subsequently, VMIs were generated for 20 patients from SECT images using the trained deep learning model., Results: The contrast-to-noise ratio was significantly improved (p < 0.001) in the generated VMIs (4.1 ± 1.8) compared to the SECT images (2.8 ± 1.1). The mean overall image quality (4.1 ± 0.6) and tumor enhancement (3.6 ± 0.6) in the generated VMIs assessed on a five-point scale were significantly higher (p < 0.001) than that in the SECT images (3.2 ± 0.4 and 2.8 ± 0.4 for overall image quality and tumor enhancement, respectively)., Conclusions: The quality of the SECT image was significantly improved both objectively and subjectively using the proposed deep learning model for pancreatic tumors in radiotherapy., (Copyright © 2021 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.)

Purpose: This study investigated the characteristics of a new shielded diode detector, microSilicon X (model 60022: MSX), for small-field and large-field dosimetry., Methods: The percent depth dose (PDD), beam profiles, detector output factor (OF det ), temperature dependence, dose rate dependence, dose-per-pulse (DPP) dependence, and dose-response linearity of MSX were evaluated in Cyberknife and TrueBeam photon beams and compared with various detectors including microDiamond (PTW model 60019: MD), Sun Nuclear EDGE detector, Photon diode (PTW model 60016: PD), and semiflex ionization chamber (PTW model 31010: IC)., Results: For field sizes ranging from 50 × 50 mm 2 to 400 × 400 mm 2 , MSX-measured OF det values were within 1% of the IC-measured values. For the CyberKnife small fields, the maximum difference between the MSX-measured OF det and the MD-measured field output factor (Ω) was 4.0%, while the maximum differences were 8.8% and 10.9% for PD and EDGE, respectively. MSX showed a stable response within 0.7% for water temperatures of 5°C to 34°C, while PD and EDGE showed a linear correlation between the water temperature and the response. MSX showed small variations within 0.2% for the dose rate, and PD and EDGE showed logarithmic increases in the response with the dose rate. MSX and MD had smaller DPP dependences than PD and EDGE., Conclusions: The characteristics of MSX for measurements of small- and large-field photon beams are favorable. Compared to PD, MSX exhibited significant improvement in the over-response for small fields. The OF det values measured by MSX were approximately in-between those measured by MD and PD. MSX showed stable responses against water temperature, dose rate, and DPP variations and provided suitable data for a wide range of field sizes. However, careful attention is required for measurements of OF det for field sizes of <10 × 10 mm 2 and PDD for field sizes of ≥200 × 200 mm 2 ., (© 2020 American Association of Physicists in Medicine.)

Treatment time with the CyberKnife frameless radiosurgery system is prolonged due to the motion of the robotic arm. We have developed a novel scanning irradiation method to reduce treatment time. We generated treatment plans mimicking eight-field intensity-modulated radiotherapy (IMRT) plans generated for the Novalis radiosurgery system. 2D dose planes were generated with multiple static beam spots collimated by a fixed circular cone. The weights of the uniformly distributed beam spots in each dose plane were optimized using the attraction-repulsion model. The beam spots were converted to the scanning speed to generate the raster scanning plan. To shorten treatment time, we also developed a hybrid scanning method which combines static beams with larger cone sizes and the raster scanning method. Differences between the Novalis and the scanning plan's dose planes were evaluated with the criterion of a 5% dose difference. The mean passing rates of three cases were > 85% for cone sizes ≤ 12.5 mm. Although the total monitor units (MU) increased for smaller cone sizes in an inverse-square manner, the hybrid scanning method greatly reduced the total MU, while maintaining dose distributions comparable to those with the Novalis plan. The estimated treatment time of the hybrid scanning with a 12.5 mm cone size was on average 22% shorter than that of the sequential plans. This technique will be useful in allowing the CyberKnife with conventional circular cones to achieve excellent dose distribution with a shortened treatment time., (© The Author(s) 2021. Published by Oxford University Press on behalf of The Japanese Radiation Research Society and Japanese Society for Radiation Oncology.)

In this study, we evaluated the inter-unit variability of the lateral response artifact for multiple flatbed scanners, focusing on the dual-channel method, and investigated the correction method of the lateral non-uniformity. Four scanners with A3+ paper-size and five scanners with A4 paper-size were evaluated. To generate the dose-response curves, small pieces of the Gafchromic EBT3 and EBT-XD films were irradiated, and five of the pieces were repeatedly scanned by moving them on the scanner to evaluate the lateral non-uniformity. To calculate the dose distribution accounting for the lateral non-uniformity, linear functions of the correction factor, representing the difference between the pixel values at offset position and the scanner midline, were calculated for red and blue color channels at each lateral position. Large variations of the lateral non-uniformity among the scanners were observed, even for the same model of scanner. For high dose, red color showed pixel value profiles similar to symmetric curves, whereas the profiles for low dose were asymmetric. The peak positions changed with dose. With correction of the lateral non-uniformity, the dose profiles of the pyramidal dose distribution measured at various scanner positions and that calculated with a treatment planning system showed almost identical profile shapes at all high-, middle- and low-dose levels. The dual-channel method used in this study showed almost identical dose profiles measured with all A3+ and A4 paper-size scanners at any positions when the corrections were applied for each color channel., (© The Author(s) 2021. Published by Oxford University Press on behalf of The Japanese Radiation Research Society and Japanese Society for Radiation Oncology.)

The goal of total body irradiation (TBI) is to deliver a dose to the whole body with uniformity within ±10%. The purpose of this study was to establish the technique of TBI using plastic bead bags. A lifting TBI bed, Model ORP-TBI-MN, was used. The space between the patient's body and the acrylic walls of the bed was filled with polyacetal bead bags. Patients were irradiated by a 10 MV photon beam with a source to mid-plane distance of 400 cm. The monitor unit (MU) was calculated by dose-per-MU, tissue-phantom-ratio and a spoiler factor measured in solid water using an ionization chamber. The phantom-scatter correction factor, off-center ratio and the effective density of the beads were also measured. Diode detectors were used for in vivo dosimetry (IVD). The effective density of the beads was 0.90 ± 0.09. The point doses calculated in an I'mRT phantom with and without heterogeneity material showed good agreement, with measurements within 3%. An end-to-end test was performed using a RANDO phantom. The mean ± SD (range) of the differences between the calculated and IVD-measured mid-plane doses was 1.1 ± 4.8% (-5.9 to 5.0%). The differences between the IVD-measured doses and the doses calculated with Acuros XB of the Eclipse treatment planning system (TPS) were within 5%. For two patients treated with this method, the differences between the calculated and IVD-measured doses were within ±6% when excluding the chest region. We have established the technique of TBI using plastic bead bags. The TPS may be useful to roughly estimate patient dose., (© The Author(s) 2020. Published by Oxford University Press on behalf of The Japanese Radiation Research Society and Japanese Society for Radiation Oncology.)

This study aimed to collect and analyze photon beam data for the Varian C-series linear accelerators (Varian Medical Systems, Palo Alto, CA, USA). We evaluated the potential of the average data to be used as reference beam data for the radiotherapy treatment planning system commissioning verification. We collected 20 data sets for 4 and 6 MV photon beams, and 40 data sets for a 10 MV photon beam generated by the Varian C-series machines, which contained the percent depth dose (PDD), off-center ratio (OCR), and output factor (OPF) from 20 institutions. The average for each of the data types was calculated across the 20 machines. Dose differences from the average for PDD at the dose fall-off region were less than 1.0%. Relative differences from the average for the OPF data were almost within 1.0% for all energies and field sizes. For OCR data in the flat regions, the standard deviation of the dose differences from the average was within 1.0%, excluding that of the 30 × 30 mm 2 field size being approximately 1.5%. For all energies and field sizes, the distance to agreement from the average in the OCR penumbra regions was less than 1.0 mm. The average data except for the small field size found in this study can be used as reference beam data for verifying users' commissioning results.

Purpose: The aim of this study was to assess the reproducibility of patient shoulder position immobilized with a novel and innovative prototype mask (E-Frame, Engineering System)., Methods: The E-frame mask fixes both shoulders and bisaxillary regions compared with that of a commercial mask (Type-S, CIVCO). Thirteen and twelve patients were immobilized with the Type-S and E-Frame mask systems, respectively. For each treatment fraction, cone-beam CT (CBCT) images of the patient were acquired and retrospectively analyzed. The CBCT images were registered to the planning CT based on the cervical spine, and then the displacements of the acromial extremity of the clavicle were measured., Results: The systematic and random errors between the two mask systems were evaluated. The differences of the systematic errors between the two mask systems were not statistically significant. The mean random errors in the three directions (AP, SI and LR) were 2.7 mm, 3.1 mm and 1.5 mm, respectively for the Type-S mask, and 2.8 mm 2.5 mm and 1.4 mm, respectively for the E-Frame mask. The random error of the E-Frame masks in the SI direction was significantly smaller than that of the Type-S. The number of cases showing displacements exceeding 10 mm in the SI direction for at least one fraction was eight (61% of 13 cases) and three (25% of 12 cases) for Type-S and E-Frame masks, respectively., Conclusions: The E-Frame masks reduced the random displacements of patient's shoulders in the SI direction, effectively preventing large shoulder shifts that occurred frequently with Type-S masks., (Copyright © 2020 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.)

This study characterized a new unshielded diode detector, the microSilicon (model 60023), for small-field photon beam dosimetry by evaluating the photon beams generated by a TrueBeam STx and a CyberKnife. Temperature dependence was evaluated by irradiating photons and increasing the water temperature from 11.5 to 31.3°C. For Diode E, microSilicon, microDiamond and EDGE detectors, dose linearity, dose rate dependence, energy dependence, percent-depth-dose (PDD), beam profiles and detector output factor (OFdet) were evaluated. The OFdet of the microSilicon detector was compared to the field output factors of the other detectors. The microSilicon exhibited small temperature dependence within 0.4%, although the Diode E showed a linear variation with a ratio of 0.26%/°C. The Diode E and EDGE detectors showed positive correlations between the detector reading and dose rate, whereas the microSilicon showed a stable response within 0.11%. The Diode E and microSilicon demonstrated negative correlations with the beam energy. The OFdet of microSilicon was the smallest among all the detectors. The maximum differences between the OFdet of microSilicon and the field output factors of microDiamond were 2.3 and 1.6% for 5 × 5 mm2 TrueBeam and 5 mm φ CyberKnife beams, respectively. The PDD data exhibited small variations in the dose fall-off region. The microSilicon and microDiamond detectors yielded similar penumbra widths, whereas the other detectors showed steeper penumbra profiles. The microSilicon demonstrated favorable characteristics including small temperature and dose rate dependence as well as the small spatial resolution and output factors suitable for small field dosimetry., (© The Author(s) 2020. Published by Oxford University Press on behalf of The Japanese Radiation Research Society and Japanese Society for Radiation Oncology.)

Background/aim: This study aimed to investigate the potential differences between multi-institutional measurements and treatment planning system (TPS) calculation modeled by representative beam data for patient-specific quality assurance (QA), including multi-leaf collimator (MLC) parameters., Materials and Methods: Eleven TrueBeam from nine institutions were used in this study. Volumetric arc therapy (VMAT) plan for verification was created using Eclipse. The point dose of the CC13 ionization chamber and the dose distribution of the GAFCHROMIC EBT3 film were measured and analyzed., Results: Point dose differences in patient-specific QA provided a mean±standard deviation of 1.0%±0.6%. Mean gamma pass rates of dose distribution were in excess of 99% and 96% for 3%/2 mm and 2%/2 mm gamma criteria, respectively., Conclusion: There was good agreement between measurements and calculations, indicating the small influence of complex VMAT in the underlying processes. Therefore, implementation of the same MLC parameters on TPS among different institutions with the same planning policy should be considered to ensure consistency and efficiency in radiation treatment processes., (Copyright© 2020, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.)