Search

Numerous studies have analyzed techniques for producing reliable and efficient arthroscopic knots. All aspects have been explored, from the biomechanics and strength to the ability to teach and replicate at all levels of training. This technique article describes an additional maneuver (X-grab) for efficiently marking the post side of the arthroscopic knot without having to do this separately outside of the joint. This is most useful for procedures such as rotator cuff repair and capsular repair or plication in hip arthroscopy in which the location of the knot (i.e., the post) is critical. The aim of this Technical Note is to describe the X-grab maneuver, which shortens this process to a single step, limiting the see-sawing of sutures and over-instrumentation of the joint seen with other techniques.

Purpose: To determine the percent maximal outcome improvement willingness thresholds (MOWTs) for the Nonarthritic Hip Score (NAHS) and the visual analog scale (VAS) for pain that were associated with a patient’s willingness to undergo surgery, in retrospect, given the known outcome of their primary hip arthroscopy with concomitant endoscopy for gluteus medius (GM) tear repair. Methods: An anchor question was provided to patients who underwent primary hip arthroscopy for femoroacetabular impingement syndrome with concomitant endoscopic GM tear repair between April 2008 to April 2020. Patients were included if they answered the anchor question and had baseline and postoperative minimum 1-year follow-up scores for the NAHS and VAS. Patients were excluded if they had a previous ipsilateral hip surgery, Tönnis grade >1, hip dysplasia, previous hip conditions, or a preoperative score that was already at the maximum value for the NAHS and VAS scores. Receiver operating characteristic (ROC) analysis was used to determine the MOWT. Significance was indicated by a P value

Purpose: To report on clinical presentations and outcomes in patients who underwent an isolated endoscopic gluteus medius (GM) repair. Methods: We retrospectively reviewed and prospectively collected data on patients who underwent a primary isolated endoscopic GM repair. Patients were included if the following patient-reported outcome scores were obtained preoperatively and at minimum 2-year follow-up: modified Harris Hip Score (mHHS), Non-arthritic Hip Score (NAHS), and visual analog scale (VAS) score. The minimal clinically important difference (MCID) for the mHHS, NAHS, and Hip Outcome Score–Sports Specific Scale was uniquely calculated for this study. Patients who underwent concomitant procedures including hip arthroplasty and hip arthroscopy were excluded. Results: A total of 26 hips met all inclusion and exclusion criteria, of which 23 hips (88.5%) (22 patients) had a minimum 2-year follow-up. Nineteen hips had a partial-thickness GM tear; 17 (89.5%) were high-grade partial-thickness tears treated with a side-to-side repair through a transtendinous window. Four full-thickness tears with no retraction or fatty infiltration were able to be repaired endoscopically. The mHHS, NAHS, and VAS score all significantly improved (P < .05) from baseline: The mHHS improved from 55.9 to 75.4 (P = .005); the NAHS, from 58.8 to 79.2 (P = .003); and the VAS score, from 5.9 to 3.6 (P = .009). The MCID was calculated for the mHHS, NAHS, and Hip Outcome Score–Sports Specific Scale as 5.8, 7.1, and 11.0, respectively. Most patients achieved the MCID for all 3 patient-reported outcome scores. Conclusions: Appropriately selected patients without concomitant intra-articular hip pathology may achieve successful outcomes at a minimum 2-year follow-up after an isolated endoscopic GM repair. Most isolated endoscopic GM repairs were performed for partial-thickness GM tears. Level of Evidence: Level IV, case-series study.

Gross hip instability in an active adult with previous normal hip anatomy is usually due to disruption of the static stabilizers of the hip joint. Although such a disruption can result from a high-grade injury, it can be iatrogenic after previous hip arthroscopy. The patient may present with a painful limp and recurrent subluxation sensation in the affected hip joint. Revision hip arthroscopy in this scenario is generally complicated, and it is not uncommon for all the soft-tissue stabilizers to be compromised. The labrum, ligamentum teres (LT), and capsule of the hip joint are often so damaged that reparation is not an option. Reconstruction of the torn LT is an established method to add secondary stability while addressing the labral pathology in the hip joint with microinstability. Concomitant reconstruction of all the static restraints has yet to be described addressing triple instability. This Technical Note presents a stepwise approach, including tips and pearls, for arthroscopic triple reconstruction of the labrum, LT, and capsule. We believe this method is a safe and reproducible way to effectively treat gross hip instability in young patients.

Treatment of hip joint chondral damage is a well-recognized aspect of the arthroscopic management of femoroacetabular impingement syndrome. Hip chondral resurfacing has evolved from microfracture to different forms of cartilage grafting, all with variable long-term outcomes. Recent literature has focused on techniques using different cartilage sources (native and synthetic products) that are available for clinicians to choose from during hip arthroscopy. None of the published reports on cartilage grafts have commented on hip joint capsular management as part of the procedure. This is likely because of the increased difficulty of capsular closure in the dry arthroscopic environment required for graft stabilization. However, potential iatrogenic hip instability induced by an unrepaired interportal capsulotomy can be detrimental to the existing joint architecture and possibly to the cartilage graft. This article presents a step-by-step approach, including tips and pearls, for capsular closure during arthroscopic acetabular chondral resurfacing with BioCartilage (Arthrex, Naples, FL). This method is a safe and reproducible way to close the joint capsule during chondral resurfacing in patients undergoing hip preservation that can potentially enhance the chances of a successful outcome.

Gluteus medius (GM) tears are a well-established source of pain and disability. Considering previous studies, which have reported rates of incidental GM tears in 20% of patients undergoing primary total hip arthroplasty (THA) and a 3-fold greater rate in elderly female patients, additional focus should be placed on identifying treatment options. The direct anterior approach (DAA) for primary THA has gained popularity within the past few years. However, there has been a paucity in the literature on how to address symptomatic and partial GM tears through this approach. The purpose of this Technical Note is to describe a method to repair partial GM tears during primary THA using the DAA.

Intraosseous bioplasty (IOBP), has been previously described for arthroscopic-assisted treatment of subchondral bone cysts in the proximal tibia associated with early stages of knee osteoarthritis (OA). This technique entails combining bone marrow aspirate concentrate or concentrated platelet-rich plasma with demineralized bone matrix as a bone substitute before injecting into a subchondral bone defect under fluoroscopic guidance. The principles of IOBP as a procedure that combines core decompression with biologic bone substitute augmentation can be extended to treat subchondral bone marrow lesions such as acetabular and femoral cysts in degenerative hip OA. Intraosseous bioplasty of the hip, in particular the acetabulum, when done using this technique, is a useful alternative that can be beneficial in treating young patients with early hip arthritis to achieve successful outcomes while delaying more invasive procedures. The Technical Note described here presents a step-by-step approach, including tips and pearls for arthroscopic-assisted IOBP with decompression of the subchondral cyst in the acetabulum followed by bone substitute injection under fluoroscopic guidance. We believe this method is a safe and reproducible way to treat subchondral defects in young patients with signs of early osteoarthritis of the hip joint.

Femoroacetabular impingement describes a pathologic interaction between the bony femoral head/neck junction and acetabulum. Cam-type femoroacetabular impingement results from an aspherical femoral head architecture, which increases early contact along the acetabular surface during hip range of motion. Errant arthroscopic femoroplasty recently has been discussed within the literature to describe a preventable etiology of failed hip arthroscopy, most notably cam over- and under-resection. We present an arthroscopic surgical technique for achieving the perfectly spherical femoroplasty, meant to minimize complications and improve postoperative outcomes.

Management of chondral lesions of the femoral head can be challenging. Previously described approaches include arthroscopic surgery for small lesions and open surgical dislocation for larger lesions. In 2001, Ganz popularized the trochanteric flip osteotomy for surgical dislocation, and this remains the workhorse for treatment of large chondral lesions. However, by using a Smith–Peterson (direct anterior) approach and a femoral head allograft, large lesions may be treated while avoiding both trochanteric osteotomy and donor-site morbidity. We present our technique using a Smith–Peterson approach and osteochondral implantation of fresh femoral head allograft for surgical treatment of a femoral head chondral lesion.

The importance of the labrum in the biomechanics of the hip joint is well documented. Labral tears are the most common pathology in patients undergoing hip arthroscopy and therefore appropriate labral management is vital. Labral preservation has been advocated as a superior alternative to labral excision in terms of clinical outcomes. While reconstruction of the labrum is recommended for irreparable tears, labral augmentation is a viable alternative for labral function restoration under certain indications. This Technical Note will describe a method for arthroscopic hip labral augmentation using an anterior tibialis tendon allograft and the pull-through technique.

Once perceived to be a vestigial structure, the ligamentum teres (LT) is now increasingly understood to be critical to providing stability in the adult hip. Surgical treatment with arthroscopic debridement is usually the procedure of choice to treat LT tears. However, reconstruction is a possible alternative in select cases. The authors of a recent systematic review concluded that LT debridement may provide short-term relief of hip pain in patients with partial-thickness tears in whom conservative management has failed whereas reconstruction may be more beneficial in cases of full-thickness tears. This Technical Note describes a method for arthroscopic LT reconstruction using the tension-slide technique to fixate an anterior tibialis tendon allograft to the acetabulum.

Despite all the advances in hip arthroscopy, microfracture is still the workhorse for treating focal and full-thickness cartilage lesions. The success of this treatment is owed to its reliability and simplicity. Given the structure of the hip joint, however, there are challenges to this procedure using a conventional microfracture pick. This note presents our current and preferred microfracture technique using a curve drill guide and flexible drill. This method offers greater range of access to different regions of the joint with ease, thus ensuring a reproducible and quicker procedure with less risk.

Over the past decade, understanding of disorders compromising greater trochanteric pain syndrome (GTPS) has increased dramatically. Nonsurgical treatment options include physical rehabilitation and activity modification, anti-inflammatory as well as biologic injections into the peritrochanteric compartment, and administration of oral analgesics. Multiple open and endoscopic treatment options exist when nonsurgical management is unsuccessful in patients with refractory lateral-sided hip pain, with or without weakness. No true consensus exists within the literature regarding operative techniques of GTPS or postoperative rehabilitation protocols. We present an endoscopic classification system of GTPS with 5 distinct types, which seems to correlate well with preoperative diagnoses and postoperative rehabilitation protocols. The classification system is intuitive, and the corresponding surgical techniques are reproducible for surgeons treating peritrochanteric pathology. Level of Evidence: I (hip); II (extra-articular, impingement).

Most surgeons rely on the greater trochanter as the reference point to establish the anterolateral portal. Nevertheless, we believe that the anterosuperior iliac spine is a more reliable landmark. Unlike the greater trochanter, it is unaffected by leg rotation and is more easily identified by palpation. Abiding by the central tenet of medicine to “do no harm,” the technique described herein presents in detail the concept of the 12 o’clock portal placement, a hip joint access method based on identifying specific anatomic points under fluoroscopy and by palpation. To accomplish this goal, this Technical Note presents a step-by-step approach, including tips and pearls for patient positioning and fluoroscopic guidance. We believe this method ensures a reproducible and safe way to start hip arthroscopy in the supine position.

In the setting of true hip dysplasia, the high prevalence of intra-articular pathology may lead to recurrent symptoms and failure after periacetabular osteotomy (PAO). Femoral neck osteochondroplasty, microfracture, removal of loose bodies, and labral repair are examples of procedures that are performed with concomitant arthroscopy. When damage to the labrum is too severe to repair, reconstruction instead of extensive debridement before PAO can be more effective in restoring the labral seal to maintain joint lubrication and chondral protection. This Technical Note describes a method for concomitant hip arthroscopy with circumferential labral reconstruction with allograft and PAO.

The concept of margin convergence for side-to-side strain reduction in massive U-type rotator cuff tears has been used to protect the free margin repair to bone. Data in the literature show favorable outcomes for this method of repair. However, one of the challenges when performing side-to-side repair has been the dog-ear deformity that forms at both the convergence split and marginal ends. We present a method of single-suture convergence using a “shoelace” weaving technique, which seems to decrease the incidence of dog-ear deformity, decreases margin strain, and can be incorporated into current transosseous-equivalent rotator cuff repair configurations. The technique is simple and reproducible for large or massive tear patterns.