Search

In this paper, the concept of the continuous fabrication of a metallic sandwich plate with a three-dimensional truss core is introduced. The method consists of three processes as a fabrication system: metallic mesh manufacture, truss core making, and bonding. A process that fabricates rhombic-shaped metal meshes without material loss is introduced. In order to construct the truss core, a crimping process is employed. Bonding is carried out using multipoint resistance welding with a pair of roll electrodes. To realize the proposed process, a prototype apparatus was assembled. Sandwich plates with a pyramidal truss core are fabricated on an integrated system for continuous fabrication, and various experimental verifications are performed in order to investigate the applicability of the proposed process. As a result, it has been shown that the proposed process is an efficient and practical manufacturing process for continuous fabrication of truss-cored sandwich plates. [ABSTRACT FROM AUTHOR]

Most rapid prototyping (RP) processes adopt a solid CAD model, which will be sliced into thin layers of constant thickness in the building direction. Each cross-sectional layer is successively deposited and, simultaneously, bonded onto the previous layer; eventually, the stacked layers form a physical part of the model. A new thick-layered RP process, the transfer-type variable lamination manufacturing process using expandable poly styrene foam sheets (VLM-ST), has been developed to reduce building time by employing thick layers and to improve the surface finish of parts with a sloping surface. This paper describes the method to generate the unit shape layer (USL), the cutting path data of the four-axis hotwire cutter for the VLM-ST process. The USL is the basic unit of cutting and building in the VLM-ST process and it is also the basic unit of cutting path data of each layer. The USL includes data such as layer thickness, positional coordinates, side angles of each layer, and reference shape. The method to generate the USL is as follows: (1) the mid-slice of each layer is generated from the CAD model, (2) each mid-slice is converted into a simply-connected domain, (3) the rotation angle of the hotwire of the cutting system is calculated for each layer, and (4) the reference shape of each layer is generated for manual stacking. The procedure to generate the cutting path data of the linear hotwire cutter for VLM-ST was practically applied and verified for various three-dimensional shapes. [ABSTRACT FROM AUTHOR]

The T-box genes constitute a family of transcriptional regulator genes that have been implicated in a variety of developmental processes ranging from the formation of germ layers to the regionalization of the central nervous system. In this report we describe the cloning and expression pattern of a new T-box gene from zebrafish, which we named tbx20. tbx20 is an ortholog of two other T-box genes isolated from animals of different phyla - H15 of Drosophila melanogaster and tbx-12 of Caenorhabditis elegans, suggesting that the evolutionary origin of this gene predates the divergence between the protostomes and deuterostomes. During development, tbx20 is expressed in embryonic structures of both mesodermal and ectodermal origins, including the heart, cranial motor neurons, and the roof of the dorsal aorta.

Mitomycin C has improved the success rate of glaucoma filtering surgery in patients at high risk for surgical failure. However chronic hypotony is marked by decreased vision and a late-onset leaking bleb after filtration surgery using mitomycin C. Bleb excision and conjunctival advancement is the method of choice to repair bleb leakage and chronic hypotony. Five eyes from five patients were received glaucoma filtration surgery with topical mitomycin C. All of the patients' blebs were avascular and transparent. The reasons for bleb excision were two spontaneous bleb leaks, two traumatic bleb leaks and one case of severe irritation. The mean follow-up period was 18.4 +/- 8.3 months (ten to 29 months). Cataract surgery was combined in one eye. Postoperative intraocular pressure (IOP) increased from 2.3 +/- 1.5 mmHg to 9.5 +/- 3.7 mmHg at nine months postoperatively in four eyes. It went from 28 mmHg to 40 mmHg in one patient with uveitis, for whom a second trabeculectomy with mitomycin C; 0.4 mg/ml for 3 minutes, was performed. After surgery, IOP decreased to 4 mmHg in three months. Postoperative visual acuity improved four snellen lines in three eyes. A partially avascular bleb recurred in three eyes, a corneal bleb in one eye and blepharoptosis, which disappeared spontaneously at four months postoperatively, in one eye. Necrotic bleb excision and advancement of fornical conjunctiva were useful methods to increase IOP and to improve visual acuity for the patient experiencing irritation symptoms, and for leaking blebs, and hypotonic maculopathy.

Subtle differences in the pattern of arrangement of types of vertebrae and associated median skeletal structures between a benthic and limnetic species pair of three-spine stickleback from Paxton Lake, British Columbia, are typical of those found throughout the range of the Gasterosteus aculeatus species complex. We established laboratory colonies from just three individuals of each species, and studied the effect of three generations of inbreeding on axial morphology. There was sufficient divergence in the location of individual elements between families to regenerate close to the entire range of axial diversity seen in threespine sticklebacks worldwide. Analysis of the patterns of variance and covariance between the axial locations of elements provides evidence for the action of both meristic and homeotic processes in the generation of morphological divergence within each species. Hybrid sticklebacks produced by the cross of limnetic and benthic parents tend to have intermediate morphologies, with dominance of either parental type evident for some elements. Effects of temperature and salinity were found to be small in direct comparison with between-family effects, and varied according to genetic background. These results demonstrate that considerable genetic variation for axial morphology is maintained in natural populations of three-spine stickleback, and that differences between populations may be brought about rapidly by changes in frequency of alleles that have coordinated effects along the body axis.

Understanding the patterning mechanisms that operate to promote differentiation of individual segments along the main body axis is an important goal of both developmental and evolutionary biology. In order to gain a better insight into the role of Hox genes in generating diversity of axial plans seen in vertebrates, we have cloned 11 homeobox sequences from an acanthopterygian teleost, the threespine stickleback, and analyzed the expression of 7 of these during embryogenesis. Transcripts are observed in a variety of tissues, including the neural tube, paraxial mesoderm, lateral plate mesoderm, pectoral fins, pronephric ducts, as well as some neural crest-derived structures. Anterior limits of expression in the central nervous system and paraxial mesoderm exhibited both similarities and differences to those of mouse and zebrafish homologs. In both stickleback and zebrafish embryos expression limits within the paraxial mesoderm were detected only within the trunk region in which ribs are attached to all vertebrae. The finding of this pattern in two divergent teleosts as well as in various tetrapod species supports the hypothesis that a Hox precode was present prior to the divergence of ray-finned and lobe-finned fishes and was subsequently used to generate different types of vertebrae in tetrapods. We also describe a dynamic pattern of expression of several stickleback Hox genes associated with the development of the caudal paraxial mesoderm, which suggests uncoupling of the process of segmentation from segmental identity determination. We propose that in fishes the patterning of the tail region is under the control of a separate mechanism from the trunk, which utilizes Hox genes in a different manner.

Despite mounting evidence that key developmental regulator genes are involved in significant macroevolutionary changes, there have been few studies demonstrating the functional significance of variation in such genes for the generation of population-level variation. In this study we examined and compared the expression domains of three Hox gene homeobox sequences in embryos derived from two morphologically distinct populations of the threespine stickleback, Gasterosteus aculeatus. We found within-population variation in the location of anterior limits, particularly in more 5' Hox genes whose anterior expression domains showed graded distributions of transcripts over several somites. However, despite considerable and statistically significant differences in the anteroposterior pattern of the axial and median skeletons between the two stickleback populations, this phenotypic variation was not found to be correlated with any of the variation in Hox gene expression. The possible functional significance of the combinatorial Hox code in fish species is discussed with respect to the buffering of development in fluctuating environments, and it is argued that population and quantitative genetic perspectives should also be taken into account in considering the function and evolution of Hox genes.