Search

Dynamic covalent bonds have attracted considerable attention for the development of pH-responsive polymers, however, studies using acid-cleavable enaminone linkages as a means of controlled release are limited. Herein, we report pH-sensitive benzocaine-modified poly(ethylene glycol) monomethyl ether-block-poly[2-(acetoacetoxy)ethyl methacrylate] (mPEGx-b-pAEMAy)/BNZ nanoparticles (NPs) for the aqueous controlled release of benzocaine through enaminone bond cleavage. The system is based on the commercially available monomer 2-(acetoacetoxy)ethyl methacrylate (AEMA) which contains free pendant β-ketoester functionality. Well-defined poly[2-(acetoacetoxy)ethyl methacrylate] (pAEMA) homopolymers and poly[(ethylene glycol) monomethyl ether]-block-poly[2-(acetoacetoxy)ethyl methacrylate] (mPEGx-b-pAEMAy) amphiphilic block copolymers were prepared by photoinduced Cu(II)-mediated RDRP to investigate their modification with propylamine (a model amine) and benzocaine (a primary amine containing API) through an enaminone bond. Block copolymers were prepared via two poly(ethylene glycol) monomethyl ether-2-bromo-2-phenylacetate (mPEGx-BPA, x = 43 or 113) macroinitiators synthesised by esterification which acted as the hydrophilic coronas of the ensuing NPs. The self-assembly of both mPEGx-b-pAEMAy and (mPEGx-b-pAEMAy)/BNZ was assessed in water by the direct dilution approach forming spherical NPs as characterised by dynamic light scattering (DLS) and dry-state transmission electron microscopy (TEM). Finally, the in vitro controlled release of benzocaine from mPEGx-b-pAEMAy/BNZ NPs was examined at different pH environments demonstrating faster release kinetics at lower pH with potential utility in applications with relevant chemical environments.

Polymeric dispersants are useful materials used in many different industries and often derived from oil-based chemicals, for example, in automotive fluids so as to prevent particulates from precipitation and causing potential damage. These are very often polyisobutene derivatives, and there is a growing need to replace these using chemicals using renewable resources such as the use of naturally occurring myrcene. Polymyrcene (PMy), with an ordered microstructure, has been successfully synthesized via both anionic and radical polymerization in different solvents and subsequently subjected to functionalization via photoinduced thiol–ene click reactions with a number of thiols, methyl thioglycolate, 3-mercaptopropionic acid, 3-mercapto-1-hexanol, 2-mercaptoethanol, and 1-thioglycerol, using 2,2-dimethoxy-2-phenylacetophenone as a photoinitiator under UV irradiation (λ = 365 nm) at ambient temperature. The polarity of the solvent has an important impact on the microstructure of the produced polymyrcene and, in particular, 1,2-unit (∼4%), 3,4-unit (∼41%), and 1,4-unit (∼51%) PMy were obtained via anionic polymerization in a polar solvent (THF) at ambient temperature, while 3,4-unit (∼6%) and 1,4-unit (∼94%, including cis and trans) PMy were obtained with cyclohexane as the solvent. Subsequently, photochemical thiol–ene reactions were carried out on the resulting PMy with different isomers exhibiting different reactivities of the double bonds. This strategy allows for the introduction of functional/polar groups (−COOH, −OH) into hydrophobic PMy in a controlled process. Hydrogenation of PMy and derivatized PMy was carried out to investigate any effects on the stabilities of the products which are desirable for many applications.

Direct glycan-glycan interactions are increasingly implicated in survival and pathogenicity of bacteria. Here, we show that they can be exploited by protozoan parasites in their insect hosts. Force spectroscopy revealed that Leishmania promastigotes display a high-affinity biomolecular interaction between their lipophosphoglycan glycocalyx and mimics of N-acetyl-D-galactosamine, commonly expressed on the midguts of a wide range of sand fly vector species. This enabled gut-adhesive nectomonad promastigotes of Leishmania mexicana to efficiently bind to membrane-bound mucin-like, O-linked glycoproteins of the sand fly Lutzomyia longipalpis, an event crucial for parasite survival, and accounts for a permissive mode of binding. Thus, direct interaction between parasite and sand fly midgut glycans are key to permitting vector competence for all forms of leishmaniasis worldwide. In addition, these studies demonstrate the feasibility of interfering with these interactions as transmission-blocking vaccines.

Efforts in the synthesis of macroporous polymers have mostly been directed towards the formation of stable high internal phase emulsions (HIPEs) from commercially available monomers, limiting their scope of application. Therefore, the development of simple synthetic approaches to access tailor-made macromonomers that can be used as precursors for the formation of HIPEs, allowing the design of new generations of polyHIPE materials with bespoke chemical and physical properties, is desirable in the search for new applications. In this work, cobalt(II) mediated catalytic chain transfer polymerisation (CCTP) is used to polymerise ethylene glycol dimethacrylate (EGDMA), producing multi vinyl-terminated branched EGDMA polymers with tuneable branching density and degree of unsaturation. These materials are subsequently implemented as macromonomer crosslinking agents for the formulation of HIPEs. The use of acrylate comonomers as propagation promoters is found to be essential and 2-ethylhexyl acrylate (EHA), isobornyl acrylate (IBOA) and 2-methoxyethyl acrylate (MEA) are investigated as comonomers in the formulations to both facilitate the photochemical curing of the HIPEs and to impart material properties to the products. The CCTP derived branched macromonomers are fully charaterised by GPC, 1H-NMR and MALDI–ToF spectroscopy. Scanning electron microscopy (SEM) is used to explore the morphology of the produced materials. Surface wettability experiments are conducted to evaluate the hydrophilicity of the polyHIPE surface. Compression tests are used to investigate the influence of the branching density of the CCTP macromonomers as well as the nature of comonomers on the mechanical properties of the materials.

A synthetic cell mimic in the form of giant glycosylated polymersomes (GGPs) comprised of a novel amphiphilic diblock copolymer is reported. A synthetic approach involving a poly(dimethylsiloxane) (PDMS) macro-chain transfer agent (macroCTA) and postpolymerization modification was used to marry the hydrophobic and highly flexible properties of PDMS with the biological activity of glycopolymers. 2-Bromoethyl acrylate (BEA) was first polymerized using a PDMS macroCTA ( Mn,th ≈ 4900 g·mol-1, Đ = 1.1) to prepare well-defined PDMS- b-pBEA diblock copolymers ( Đ = 1.1) that were then substituted with 1-thio-β-d-glucose or 1-thio-β-d-galactose under facile conditions to yield PDMS- b-glycopolymers. Compositions possessing ≈25% of the glycopolymer block (by mass) were able to adopt a vesicular morphology in aqueous solution (≈210 nm in diameter), as indicated by TEM and light scattering techniques. The resulting carbohydrate-decorated polymersomes exhibited selective binding with the lectin concanavalin A (Con A), as demonstrated by turbidimetric experiments. Self-assembly of the same diblock copolymer compositions using an electroformation method yielded GGPs (ranging from 2-20 μm in diameter). Interaction of these cell-sized polymersomes with fimH positive E. coli was then studied via confocal microscopy. The glucose-decorated GGPs were found to cluster upon addition of the bacteria, while galactose-decorated GGPs could successfully interact with (and possibly immobilize) the bacteria without the onset of clustering. This demonstrates an opportunity to modulate the response of these synthetic cell mimics (protocells) toward biological entities through exploitation of selective ligand-receptor interactions, which may be readily tuned through a considered choice of carbohydrate functionality.

Identifying probiotics and pathogens is of great interest to the health of the human body. It is critical to develop microbiota-targeted therapies to have high specificity including strain specificity. In this study, we have utilized E. coli MG1655 bacteria as living templates to synthesize glycopolymers in situ with high selectivity. By this bacteria-sugar monomer-aptation-polymerization (BS-MAP) method, we have obtained glycopolymers from the surface of bacteria which can recognize template bacteria from two strains of E. coli and the specific bacteria-binding ability of glycopolymers was confirmed by both bacterial aggregation experiment and QCM-D measurements. Furthermore, the synthesized glycopolymers have shown a powerful inhibitory ability which can prevent bacteria from harming cells in both anti-infection and co-culture tests.

Amphiphilic polymers have become key figures in the fields of pharmacology, medicine, agriculture and cosmetics. The use of reversible deactivation radical polymerisation (RDRP) techniques has allowed advances in the synthesis of amphiphilic polymers. However, the high price to performance ratio of these methods can limit their industrial application. Herein, poly(glycidyl methacrylate) polymers of varying molecular weights were first synthesised by catalytic chain transfer polymerisation (CCTP). Amphiphilic polymers were then prepared using a simple one-pot, post-polymerisation modification process involving Michael-thiol addition in the presence of a range of hydrophobic mercaptans, followed by ring-opening of the epoxide groups with ethanolamine using microwave-assisted synthesis. This procedure allows for the synthesis of fully functional polymers within 3 hours. A range of well-defined materials are prepared and characterised by GPC, NMR, FTIR, DLS, TGA, and TEM.

Novel approaches for culturing primary human cells in vitro are increasingly needed to study cell and tissue physiology and to grow replacement tissue for regenerative medicine. Conventional 2D monolayer cultures of endometrial epithelial and stromal cells fail to replicate the complex 3D architecture of tissue. A fully synthetic scaffold that mimics the microenvironment of the human endometrium can ultimately provide a robust platform for investigating tissue physiology and, hence, take significant steps toward tackling female infertility and IVF failure. In this work, emulsion-templated porous polymers (known as polyHIPEs) were investigated as scaffolds for the culture of primary human endometrial epithelial and stromal cells (HEECs and HESCs). Infiltration of HEECs and HESCs into cell-seeded polyHIPE scaffolds was assessed by histological studies, and phenotype was confirmed by immunostaining. Confocal microscopy revealed that the morphology of HEECs and HESCs is representative of that found in vivo. RNA sequencing was used to investigate transcriptome differences between cells grown on polyHIPE scaffolds and in monolayer cultures. The differentiation status of HEECs and HESCs grown in polyHIPE scaffolds and in monolayer cultures was further evaluated by monitoring the expression of endometrial marker genes. Our observations suggest that a 3D cell culture model that could approximate native human endometrial architecture and function can be developed using tailored polyHIPE scaffolds.\ud \ud

A new facile and efficient route for the chemical functionalisation of thiol-acrylate polyHIPE materials with responsive macromolecules using the highly emissive dithiomaleimide (DTM) linker is demonstrated. Functionalisation is found to be reversible upon addition of a thiol-containing compound, glutathione, resulting in switchable surface properties including fluorescence and wettability, hence broadening the scope of applications.

A novel strategy for the surface functionalization of emulsion-templated highly porous (polyHIPE) materials as well as its application to in vitro 3D cell culture is presented. A heterobifunctional linker that consists of an amine-reactive N-hydroxysuccinimide ester and a photoactivatable nitrophenyl azide, N-sulfosuccinimidyl-6-(4'-azido-2'-nitrophenylamino)hexanoate (sulfo-SANPAH), is utilized to functionalize polyHIPE surfaces. The ability to conjugate a range of compounds (6-aminofluorescein, heptafluorobutylamine, poly(ethylene glycol) bis-amine, and fibronectin) to the polyHIPE surface is demonstrated using fluorescence imaging, FTIR spectroscopy, and X-ray photoelectron spectroscopy. Compared to other existing surface functionalization methods for polyHIPE materials, this approach is facile, efficient, versatile, and benign. It can also be used to attach biomolecules to polyHIPE surfaces including cell adhesion-promoting extracellular matrix proteins. Cell culture experiments demonstrated that the fibronectin-conjugated polyHIPE scaffolds improve the adhesion and function of primary human endometrial stromal cells. It is believed that this approach can be employed to produce the next generation of polyHIPE scaffolds with tailored surface functionality, enhancing their application in 3D cell culture and tissue engineering whilst broadening the scope of applications to a wider range of cell types.

Glycopolymers with specificity to template strain of E. coli were synthesised by the bacteria-sugar monomer-aptation-polymerization., Identifying probiotics and pathogens is of great interest to the health of the human body. It is critical to develop microbiota-targeted therapies to have high specificity including strain specificity. In this study, we have utilized E. coli MG1655 bacteria as living templates to synthesize glycopolymers in situ with high selectivity. By this bacteria-sugar monomer-aptation-polymerization (BS-MAP) method, we have obtained glycopolymers from the surface of bacteria which can recognize template bacteria from two strains of E. coli and the specific bacteria-binding ability of glycopolymers was confirmed by both bacterial aggregation experiment and QCM-D measurements. Furthermore, the synthesized glycopolymers have shown a powerful inhibitory ability which can prevent bacteria from harming cells in both anti-infection and co-culture tests.

The chemical and mechanical properties of macroporous polymer substrates play a crucial role in the determination of their end-application. The preparation of highly (macro)porous monolithic polymers (polyHIPEs) by emulsion templating and thiol-ene/yne photopolymerisation, using multifunctional acrylate, allyl ether and alkyne-based monomers with trimethylolpropane tris (3-mercaptopropionate) (TMPTMP), is described in this work. Issues associated with monomer solubility and/or stability of the produced high internal phase emulsions (HIPEs) are tackled. Scanning electron microscopy (SEM) is used to study the morphology and porosity (average void diameters) of the obtained materials. Due to the nature of the photoinitiated thiol-ene reactions, materials obtained from acrylate monomers display residual thiols that are quantified by a colourimetric (Ellman's) assay. Raman spectroscopy is also shown to be a complementary technique to evaluate the residual thiol content. The influence of the monomer functionality on the mechanical properties of the material is explored using compression tests. Significant differences in the surface functionality and mechanical behavior between materials prepared with comonomers able to homopolymerise (acrylates) and those unable to homopolymerise (allyl ethers; alkynes) are demonstrated.\ud \ud

Haematopoiesis, the process of blood production, occurs from a tiny contingent of haematopoietic stem cells (HSC) in highly specialised three-dimensional niches located within the bone marrow. When haematopoiesis is replicated using in vitro two-dimensional culture, HSCs rapidly differentiate, limiting self-renewal. Emulsion-templated highly porous polyHIPE foam scaffolds were chosen to mimic the honeycomb architecture of human bone. The unmodified polyHIPE material supports haematopoietic stem and progenitor cell (HSPC) culture, with successful culture of erythroid progenitors and neutrophils within the scaffolds. Using erythroid culture methodology, the CD34+ population was maintained for 28 days with continual release of erythroid progenitors. These cells are shown to spontaneously repopulate the scaffolds, and the accumulated egress can be expanded and grown at large scale to reticulocytes. We next show that the polyHIPE scaffolds can be successfully functionalised using activated BM(PEG)2 (1,8-bismaleimido-diethyleneglycol) and then a Jagged-1 peptide attached in an attempt to facilitate notch signalling. Although Jagged-1 peptide had no detectable effect, the BM(PEG)2 alone significantly increased cell egress when compared to controls, without depleting the scaffold population. This work highlights polyHIPE as a novel functionalisable material for mimicking the bone marrow, and also that PEG can influence HSPC behaviour within scaffolds.

Copper-catalyzed azide-alkyne cycloaddition (CuAAC) was used to prepare glycosylated polyethylene (PE)–poly(ethylene glycol) (PEG) amphiphilic block copolymers. The synthetic approach involves preparation of alkyne-terminated PE-b-PEG followed by CuAAC reaction with different azide functionalized sugars. The alkyne-terminated PE-b-PEG was prepared by etherification reaction between hydroxyl-terminated PE-b-PEG (Mn ∼ 875 g mol−1) and propargyl bromide and azidoethyl glycosides were prepared by glycosylation of 2-azidoethanol. Atmospheric pressure solids analysis probe-mass spectrometry was used as a novel solid state characterization tool to determine the outcome of the CuAAC click reaction and end-capping of PE-b-PEG by the azidoethyl glycoside group. The aqueous solution self-assembly behavior of these amphiphilic glycosylated polymers was explored by TEM and dye solubilization studies. Carbohydrate-bearing spherical aggregates with the ability to solubilize a hydrophobic dye were observed. The potential of these amphiphilic glycosylated polymers to self-assemble via electro-formation into giant carbohydrate-bearing polymersomes was also investigated using confocal fluorescence microscopy. An initial bioactivity study of the carbohydrate-bearing aggregates is furthermore presented. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 5184–5193

Despite the low complexity of their components, several simple physical systems, including microspheres, coacervate droplets and phospholipid membrane structures (liposomes), have been suggested as protocell models. These, however, lack key cellular characteristics, such as the ability to replicate or to dock with extracellular species. Here, we report a simple method for the de novo creation of synthetic cell mimics in the form of giant polymeric vesicles (polymersomes), which are capable of behavior approaching that of living cells. These polymersomes form by self-assembly, under electroformation conditions, of amphiphilic, glycosylated block copolymers in aqueous solution. The glycosylated exterior of the resulting polymeric giant unilamellar vesicles (GUVs) allows their selective interaction with carbohydrate-binding receptor-functionalized particles, in a manner reminiscent of the cell-surface docking of virus particles. We believe that this is the first example of a simple protocell model displaying cell-like behavior through a native receptor-ligand interaction.

PEGylation, the covalent modification of proteins with polyethylene glycol, is an abundantly used technique to improve the pharmacokinetics of therapeutic proteins. The drawback with this methodology is that the covalently attached PEG can impede the biological activity (e.g., reduced receptor-binding capacity). Protein therapeutics with "disposable" PEG modifiers have potential advantages over the current technology. Here, we show that a protein polymer "Medusa complex" is formed by the combination of a hexavalent lectin with a glycopolymer. Using NMR spectroscopy, small-angle X-ray scattering (SAXS), size exclusion chromatography, and native gel electrophoresis it was demonstrated that the fucose-binding lectin RSL and a fucose-capped polyethylene glycol (Fuc-PEG) form a multimeric assembly. All of the experimental methods provided evidence of noncovalent PEGylation with a concomitant increase in molecular mass and hydrodynamic radius. The affinity of the protein polymer complex was determined by ITC and competition experiments to be in the micromolar range, suggesting that such systems have potential biomedical applications.

Synthetic polymer nanoparticles that can be tailored through multivalent ligand display on the surface, while at the same time allowing encapsulation of desired bioactive molecules, are especially useful in providing a versatile and robust platform in the design of specific delivery vehicles for various purposes. Glycosylated nanoparticles (glyco-NPs) of a poly(n-butyl acrylate) (pBA) core and poly(N-2-(β-d-glucosyloxy)ethyl acrylamide) (p(NβGlcEAM)) or poly(N-2-(β-D-galactosyloxy)ethyl acrylamide) (p(NβGalEAM)) corona were prepared via nanoprecipitation in aqueous solutions of preformed amphiphilic glycopolymers. Well-defined block copolymers of (poly(pentafluorophenyl acrylate) (pPFPA) and pBA were first prepared by RAFT polymerization followed by postpolymerization functionalization with aminoethyl glycosides to yield p(NβGlcEAM-b-BA) and p(NβGalEAM-b-BA), which were then used to form glyco-NPs (glucosylated and galactosylated NPs, Glc-NPs and Gal-NPs, respectively). The glyco-NPs were characterized by dynamic light scattering (DLS) and TEM. Encapsulation and release of ampicillin, leading to nanoparticles that we have termed “glyconanobiotics”, were studied. The ampicillin-loaded glyco-NPs were found to induce aggregation of Staphylococcus aureus and Escherichia coli and resulted in antibacterial activity approaching that of ampicillin itself. This glyconanobiotics strategy represents a potential new approach for the delivery of antibiotics close to the surface of bacteria by promoting bacterial aggregation. Defined release in the proximity of the bacterial envelope may thus enhance antibacterial efficiency and potentially reduce the quantities of agent required for potency.\ud \ud

This article describes a versatile method for the modification of 2-hydroxyethyl cellulose (HEC) involving azide-alkyne cycloaddition reaction to impart neutral (ester) and ionic (carboxylic acid and 1(ry) amine) functionalities. The synthetic approach involved, first the introduction of the azide functionality to HEC and then followed by its cycloaddition reaction with several alkyne terminated compounds: namely ethyl propiolate, 5-hexynoic acid and propargyl amine. Sequential Click reactions were also demonstrated to be feasible by the successful synthesis of polydimethylsiloxane (PDMS) grafted HEC containing neutral (ester) and ionic (carboxylic acid and 1(ry) amine) functionalities. The Click chemistry was then further utilized similarly to graft poly(lactic acid) (PLA) and poly(ethylene glycol) (PEG) segments to HEC to access its hydrophobic and hydrophilic analogs, respectively. AFM analysis revealed that while HEC itself formed uniform oval features, the PLA grafted HEC exhibited a brushlike architecture. The formation of these brushlike structures suggested that the HEC backbone exhibits an extended conformation with the side chains stretched out. The resulting polymeric materials were characterized by solution and solid state (13)C NMR and FTIR spectroscopy.

The present investigation was conducted during 2006 and 2007 growing seasons in order to study the effects of different salinity levels on the growth and chemical composition of sour orange and Volkamer lemon rootstocks. Besides, this research was also undertaken to elucidate the efficiency of mycorrhizal colonization on controlling the various hazards accompanying salinity stress. One-year-old sour orange and Volkamer lemon rootstocks were kept in a glasshouse and irrigated with control (non-saline), 1500 ppm, 3000 ppm and 4500 ppm of salinity levels. Salinity decreased arbuscular mycorrhizal (AM) colonization. In both the AM and non AM, leaf area, trunk cross-sectional area, total, top, leaf and root dry weights were decreased under salinity. The plants inoculated with the AM fungus had significantly higher growth parameters compared to the non-inoculated plants. Increasing the salinity level tended to increase the concentrations of leaf Na, N, Ca and Cl while P, K, Mg, Fe, Mn, Zn and Cu decreased. On the contrary, inoculating the seedlings with AM tended to increase the levels of P, K, Mg and Zn. Whereas leaf N, Ca and Na of inoculated seedlings was significantly lower than that of un-inoculated ones. Leaf Cl, Fe, Mn and Cu contents did not statistically vary in this concern.

A novel temperature responsive water-soluble glycopolymer was synthesised via copper wire-catalysed click-polymerisation. Di-hydroxyl terminated poly(ethylene glycol) was quantitatively alkyne end-capped to yield di-alkyne terminated poly(ethylene glycol) (DAT-PEG). 2,3,4,2′,3′,4′-hexa- O -acetyl-6,6′-diazido-6,6′-dideoxy-α,α-D-trehalose (HADADT) was prepared from the di hydrated α,α-D-Trehalose by tosylation/acetylation followed by azidation. Click-polymerisation reaction between DAT-PEG and HADADT was successfully carried out to produce an alternating glycopolymer with triazole rings as linkers in high yield. All the intermediates as well as the glycopolymer were fully characterised by NMR, MS, IR, SEC, TGA and DSC. The cloud point of the aqueous solution of glycopolymer was investigated by optical microscopy and UV–vis spectroscopy. The LCST was found to be within physiological range of about 39 °C, known as fever temperature.

Since their discovery in 1993, interest in various aspects of cyclic peptides (CPs) has expanded rapidly. Of particular note is their potential to form artificial ion channels in lipid membranes, an attractive characteristic in supramolecular chemistry and biological research. The design and synthesis of cyclic peptide-polymer conjugates (CPPCs) that can self-assemble within lipid bilayers into nanotubes, mimicking naturally occurring membrane channels and pores, has been reported. However, methods that allow direct detection of the transport process with high levels of certainty are still lacking. This work focuses on the development of a simple but reliable approach to verify and quantify proton transport across a bilayer membrane. Giant unilamellar vesicles (GUVs) are created via the electroformation method and CPPCs are incorporated in GUV membranes at varying concentrations (0-10%). Confocal fluorescence microscopy is used to demonstrate full inclusion of fluorescein-labeled CPPCs in the GUV membranes. The pH-sensitive dye carboxyfluorescein is encapsulated within the water pool of the GUVs and used as an indicator of proton transport. This assay is versatile and can be exploited on other existing proton transporter systems, providing a consistent tool to compare their performances. It should also aid the development of novel antineoplastics and drug delivery systems.

Three-dimensional (3D) cell culture is regarded as a more physiologically relevant method of growing cells in the laboratory compared to traditional monolayer cultures. Recently, the application of polystyrene-based scaffolds produced using polyHIPE technology (porous polymers derived from high internal phase emulsions) for routine 3D cell culture applications has generated very promising results in terms of improved replication of native cellular function in the laboratory. These materials, which are now available as commercial scaffolds, are superior to many other 3D cell substrates due to their high porosity, controllable morphology, and suitable mechanical strength. However, until now there have been no reports describing the surface-modification of these materials for enhanced cell adhesion and function. This study, therefore, describes the surface functionalization of these materials with galactose, a carbohydrate known to specifically bind to hepatocytes via the asialoglycoprotein receptor (ASGPR), to further improve hepatocyte adhesion and function when growing on the scaffold. We first modify a typical polystyrene-based polyHIPE to produce a cell culture scaffold carrying pendent activated-ester functionality. This was achieved via the incorporation of pentafluorophenyl acrylate (PFPA) into the initial styrene (STY) emulsion, which upon polymerization formed a polyHIPE with a porosity of 92% and an average void diameter of 33 μm. Histological analysis showed that this polyHIPE was a suitable 3D scaffold for hepatocyte cell culture. Galactose-functionalized scaffolds were then prepared by attaching 2'-aminoethyl-β-D-galactopyranoside to this PFPA functionalized polyHIPE via displacement of the labile pentafluorophenyl group, to yield scaffolds with approximately ca. 7−9% surface carbohydrate. Experiments with primary rat hepatocytes showed that cellular albumin synthesis was greatly enhanced during the initial adhesion/settlement period of cells on the galactose-functionalized material, suggesting that the surface carbohydrates are accessible and selective to cells entering the scaffold. This porous polymer scaffold could, therefore, have important application as a 3D scaffold that offers enhanced hepatocyte adhesion and functionality.