Search

Fahimeh Charbgoo,1 Mansor Bin Ahmad,2,* Majid Darroudi3,* 1Department of Pharmaceutical Biotechnology, School of Pharmacy, Mashhad University of Medical Sciences, Mashhad, Iran; 2Department of Chemistry, Faculty of Science, Universiti Putra Malaysia, Serdang, Selangor, Malaysia; 3Nuclear Medicine Research Center, Mashhad University of Medical Sciences, Mashhad, Iran *These authors contributed equally to this work Abstract: CeO2 nanoparticles (NPs) have shown promising approaches as therapeutic agents in biology and medical sciences. The physicochemical properties of CeO2-NPs, such as size, agglomeration status in liquid, and surface charge, play important roles in the ultimate interactions of the NP with target cells. Recently, CeO2-NPs have been synthesized through several bio-directed methods applying natural and organic matrices as stabilizing agents in order to prepare biocompatible CeO2-NPs, thereby solving the challenges regarding safety, and providing the appropriate situation for their effective use in biomedicine. This review discusses the different green strategies for CeO2-NPs synthesis, their advantages and challenges that are to be overcome. In addition, this review focuses on recent progress in the potential application of CeO2-NPs in biological and medical fields. Exploiting biocompatible CeO2-NPs may improve outcomes profoundly with the promise of effective neurodegenerative therapy and multiple applications in nanobiotechnology. Keywords: cerium oxide nanoparticles, green synthesis, biocompatibility, surface Ce3+, size, morphology

Fong Yen Woo,1 Mahiran Basri,1,2 Hamid Reza Fard Masoumi,1 Mansor B Ahmad,1 Maznah Ismail2 1Department of Chemistry, Faculty of Science, 2Laboratory of Molecular Biomedicine, Institute of Bioscience, Universiti Putra Malaysia, Serdang, Selangor, Malaysia Abstract: Galantamine hydrobromide (GH) is an effective drug for Alzheimer’s disease. It is currently delivered via the oral route, and this might cause nausea, vomiting, and gastrointestinal disturbance. In the present work, GH was formulated in a gel-type drug reservoir and then optimized by using response surface methodology (RSM) based on central composite design. This optimization study involved three independent variables (carbopol amount, triethanolamine amount, and GH amount) and two dependent variables (cumulative drug release amount at 8 hours and the permeation flux of drug). Two models using expert design software were fitted into a quadratic polynomial model. The optimized gel was formulated with 0.89% w/w carbopol, 1.16% w/w triethanolamine, and 4.19% w/w GH. Optimization analysis revealed that the proposed formulation has the predicted cumulative drug release amount at 8 hours of 17.80 mg·cm-2 and the predicted permeation flux of 2.27 mg·cm-2/h. These predicted values have good agreement to actual cumulative drug release amount at 8 hours (16.93±0.08 mg·cm-2) and actual permeation flux (2.32±0.02 mg·cm-2/h). This optimized reservoir formulation was then fabricated in the transdermal patch system. This patch system has moderate pH, high drug content, and controlled drug-release pattern. Thus, this patch system has the potential to be used as the drug carrier for the treatment of Alzheimer’s disease. Keywords: response surface methodology, central composite design, analysis of variance, Franz diffusion cell

Susan Azizi,1 Mansor Bin Ahmad,1 Mohd Zobir Hussein,1 Nor Azowa Ibrahim,1 Farideh Namvar2,31Department of Chemistry, Faculty of Science, 2Institute of Tropical Forestry and Forest Products, University Putra Malaysia, Selangor, Malaysia; 3Mashhad Branch, Islamic Azad University, Mashhad, IranAbstract: A series of novel bionanocomposites were cast using different contents of zinc oxide-silver nanoparticles (ZnO-AgNPs) stabilized by cellulose nanocrystals (CNC) as multifunctional nanosized fillers in poly(vinyl alcohol)/chitosan (PVA/Cs) matrices. The morphological structure, mechanical properties, ultraviolet-visible absorption, and antimicrobial properties of the prepared films were investigated as a function of their CNC/ZnO-AgNP content and compared with PVA/chitosan/CNC bionanocomposite films. X-ray diffraction and field emission scanning electron microscopic analyses showed that the CNC/ZnO-AgNPs were homogeneously dispersed in the PVA/Cs matrix and the crystallinity increased with increasing nanosized filler content. Compared with pure PVA/Cs, the tensile strength and modulus in the films increased from 0.055 to 0.205 GPa and from 0.395 to 1.20 GPa, respectively. Ultraviolet and visible light can be efficiently absorbed by incorporating ZnO-AgNPs into a PVA/Cs matrix, suggesting that these bionanocomposite films show good visibility and ultraviolet-shielding effects. The bionanocomposite films had excellent antimicrobial properties, killing both Gram-negative Salmonella choleraesuis and Gram-positive Staphylococcus aureus. The enhanced physical properties achieved by incorporating CNC/ZnO-AgNPs could be beneficial in various applications.Keywords: multifunctional nanofiller, bionanocomposite, cellulose nanocrystals, antimicrobial properties, poly(vinyl alcohol)/chitosan blend

Kamyar Shameli,1,2 Mansor Bin Ahmad,1 Ali Zamanian,2 Parvanh Sangpour,2 Parvaneh Shabanzadeh,3 Yadollah Abdollahi,4 Mohsen Zargar51Department of Chemistry, Universiti Putra Malaysia, Serdang, Selangor, Malaysia; 2Materials and Energy Research Center, Karaj, Iran; 3Department of Mathematics, 4Advanced Materials and Nanotechnology Laboratory, Universiti Putra Malaysia, Serdang, Selangor, Malaysia; 5Department of Biology, Islamic Azad University, Qom, IranAbstract: Green synthesis of noble metal nanoparticles is a vastly developing area of research. Metallic nanoparticles have received great attention from chemists, physicists, biologists, and engineers who wish to use them for the development of a new-generation of nanodevices. In this study, silver nanoparticles were biosynthesized from aqueous silver nitrate through a simple and eco-friendly route using Curcuma longa tuber-powder extracts, which acted as a reductant and stabilizer simultaneously. Characterizations of nanoparticles were done using different methods, which included ultraviolet-visible spectroscopy, powder X-ray diffraction, transmission electron microscopy, scanning electron microscopy, energy-dispersive X-ray fluorescence spectrometry, and Fourier-transform infrared spectroscopy. The ultraviolet-visible spectrum of the aqueous medium containing silver nanoparticles showed an absorption peak at around 415 nm. Transmission electron microscopy showed that mean diameter and standard deviation for the formation of silver nanoparticles was 6.30 ± 2.64 nm. Powder X-ray diffraction showed that the particles are crystalline in nature, with a face-centered cubic structure. The most needed outcome of this work will be the development of value-added products from C. longa for biomedical and nanotechnology-based industries.Keywords: silver nanoparticles, Curcuma longa, biosynthesis, green synthesis, transmission electron microscopy

Majid Darroudi1,2, Mansor Bin Ahmad3, Reza Zamiri4, AK Zak5, Abdul Halim Abdullah1,3, Nor Azowa Ibrahim31Advanced Materials and Nanotechnology Laboratory, Institute of Advanced Technology (ITMA), Universiti Putra Malaysia, Selangor, Malaysia; 2Department of Chemistry, Faculty of Science, Ferdowsi University of Mashhad, Mashhad, Iran; 3Department of Chemistry, 4Department of Physics, Faculty of Science, Universiti Putra Malaysia, Selangor, Malaysia; 5Low Dimensional Materials Research Center, Department of Physics, Faculty of Science, University of Malaya, Kuala Lumpur, MalaysiaAbstract: The application of “green” chemistry rules to nanoscience and nanotechnology is very important in the preparation of various nanomaterials. In this work, we successfully developed an eco-friendly chemistry method for preparing silver nanoparticles (Ag-NPs) in natural polymeric media. The colloidal Ag-NPs were synthesized in an aqueous solution using silver nitrate, gelatin, and glucose as a silver precursor, stabilizer, and reducing agent, respectively. The properties of synthesized colloidal Ag-NPs were studied at different reaction times. The ultraviolet-visible (UV-vis) spectra were in excellent agreement with the obtained nanostructure studies performed by transmission electron microscopy (TEM) and their size distributions. The prepared samples were also characterized by X-ray diffraction (XRD) and atomic force microscopy (AFM). The use of eco-friendly reagents, such as gelatin and glucose, provides green and economic attributes to this work.Keywords: silver nanoparticles, gelatin, green chemistry, time-dependent effect, ultraviolet-visible spectra

Kamyar Shameli1, Mansor Bin Ahmad1, Mohsen Zargar2, Wan Md Zin Wan Yunus1, Abdolhossein Rustaiyan3, Nor Azowa Ibrahim11Department of Chemistry, Faculty of Science, Universiti Putra Malaysia, Serdang, Selangor, Malaysia; 2Department of Biology, Faculty of Science, Islamic Azad University, Qom Branch, Qom, Iran; 3Department of Chemistry, Science and Research Branch, Islamic Azad University, Tehran, IranAbstract: Silver nanoparticles (Ag NPs) were synthesized by the chemical reducing method in the external and interlamellar space of montmorillonite (MMT) as a solid support at room temperature. AgNO3 and NaBH4 were used as a silver precursor and reducing agent, respectively. The most favorable experimental conditions for synthesizing Ag NPs in the MMT are described in terms of the initial concentration of AgNO3. The interlamellar space limits changed little (d-spacing = 1.24–1.47 nm); therefore, Ag NPs formed on the MMT suspension with d-average = 4.19–8.53 nm diameter. The Ag/MMT nanocomposites (NCs), formed from AgNO3/MMT suspension, were characterizations with different instruments, for example UV-visible, PXRD, TEM, SEM, EDXRF, FT-IR, and ICP-OES analyzer. The antibacterial activity of different sizes of Ag NPs in MMT were investigated against Gram-positive, ie, Staphylococcus aureus and methicillin-resistant S. aureus (MRSA) and Gram-negative bacteria, ie, Escherichia coli, Escherichia coli O157:H7, and Klebsiella pneumoniae, by the disk diffusion method using Mueller-Hinton agar (MHA). The smaller Ag NPs were found to have significantly higher antibacterial activity. These results showed that Ag NPs can be used as effective growth inhibitors in different biological systems, making them applicable to medical applications.Keywords: silver nanoparticles, nanoparticles, montmorillonite, antibacterial activity, Mueller-Hinton agar

Wandering spleen is an uncommon cause of acute abdomen in children. Diagnosis of this condition is challenging due to its non-specific symptoms, varying intensity and protracted history of presentation. Radiographs and ultrasound imaging provide rapid and reliable means to diagnose this condition without exposure to excessive radiation. We present a case of a torsed wandering spleen in a child with recurrent abdominal pain. We highlight the role of imaging in identifying salient radiographic and sonographic signs for diagnosis.

We present the case of a 33 year old lady presenting with progressive cranial nerve palsies caused by an Extrarenal Rhabdoid tumour manifesting as a sellar/suprasellar mass. We share our experience of managing the tumour and review the existing literature. Keywords: Extrarenal, Rhabdoid, INI-1, Pituitary, Sellar, Suprasellar, SMARCB1, AT/RT

Malaria remains a significant global health challenge, with Plasmodium parasites transmitted by Anopheles mosquitoes causing substantial morbidity and mortality. Despite historical efforts, malaria continues to affect millions worldwide, particularly in tropical regions. This systematic review aimed to assess the acceptability of the RTS, S/AS01 malaria vaccine among diverse populations. A comprehensive search strategy was employed across databases such as Cochrane Library, Embase, Google Scholar, and Medline. Studies were included based on specific criteria, including observational and cross-sectional designs involving adults. Data extraction and analysis were conducted meticulously, encompassing key variables related to vaccine acceptance rates and influencing factors. Analysis of 18 studies involving 18,561 participants revealed an overall malaria vaccine acceptance rate of 87.51%, ranging from 32.26% to 99.30%. Significant variations were observed based on demographics, with Ghana and Nigeria reporting high acceptance rates. Factors influencing acceptance included knowledge levels, past vaccination experiences, community preferences, and engagement in malaria prevention behaviors. Concerns about adverse reactions and regional disparities were noted as potential barriers to acceptance. This review highlights the importance of understanding public perceptions and concerns regarding malaria vaccines to enhance vaccine coverage and uptake. Tailored communication strategies, advocacy efforts, and targeted education interventions are crucial for addressing misconceptions and increasing vaccine acceptance. Policy recommendations should consider demographic and regional factors to ensure effective implementation of malaria vaccination programs, ultimately contributing to global malaria prevention efforts and public health initiatives., Competing Interests: The authors have declared that no competing interests exist., (Copyright © 2024, Ansar et al.)

The unpredictable pandemic came to light at the end of December 2019, known as the novel coronavirus, also termed COVID-19, identified by the World Health Organization (WHO). The virus first originated in Wuhan (China) and rapidly affected most of the world's population. This outbreak's impact is experienced worldwide because it causes high mortality risk, many cases, and economic falls. Around the globe, the total number of cases and deaths reported till November 12, 2022, were >600 million and 6.6 million, respectively. During the period of COVID-19, several diverse diagnostic techniques have been proposed. This work presents a systematic review of COVID-19 diagnostic techniques in response to such acts. Initially, these techniques are classified into different categories based on their working principle and detection modalities, i.e. chest X-ray imaging, cough sound or respiratory patterns, RT-PCR, antigen testing, and antibody testing. After that, a comparative analysis is performed to evaluate these techniques' efficacy which may help to determine an optimum solution for a particular scenario. The findings of the proposed work show that Artificial Intelligence plays a vital role in developing COVID-19 diagnostic techniques which support the healthcare system. The related work can be a footprint for all the researchers, available under a single umbrella. Additionally, all the techniques are long-lasting and can be used for future pandemics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Among the premenopausal women, Polycystic Ovary Syndrome (PCOS) is the most prevalent endocrinopathy affecting the reproductive system and metabolic rhythms leading to disrupted menstrual cycle. Being heterogeneous in nature it is characterized by complex symptomology of oligomennorhoea, excess of androgens triggering masculine phenotypic appearance and/or multiple follicular ovaries. The etiology of this complex disorder remains somewhat doubtful and the researchers hypothesize multisystem links in the pathogenesis of this disease. In this review, we attempt to present several hypotheses that tend to contribute to the etiology of PCOS. Metabolic inflexibility, aberrant pattern of gonadotropin signaling along with the evolutionary, genetic and environmental factors have been discussed. Considered a lifelong endocrinological implication, no universal treatment is available for PCOS so far however; multiple drug therapy is often advised along with simple life style intervention is mainly advised to manage its cardinal symptoms. Here we aimed to present a summarized view of pathophysiological links of PCOS with potential therapeutic strategies., Competing Interests: Conflict of interestAuthors declare no conflict of interest., (© The Author(s), under exclusive licence to Association of Clinical Biochemists of India 2023. Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.)

Various evidences have unveiled the significance of Vitamin D in diverse processes which include its action in prevention of immune dysfunction, cancer and cardiometabolic disorders. Studies have confirmed the function of VD in controlling the expression of approximately nine hundred genes including gene expression of insulin. VD insufficiency may be linked with the pathogenesis of diseases that are associated with insulin resistance (IR) including diabetes as well as obesity. Thus, VD lowers IR-related disorders such as inflammation and oxidative stress. This review provides an insight regarding the molecular mechanism manifesting, how insufficiency of VD may be connected with the IR and diabetes. It also discusses the effect of VD in maintaining the Ca 2+ levels in beta cells of the pancreas and in the tissues that are responsive to insulin., Competing Interests: Conflict of interestThe author’s declare that they have no conflict of interest., (© The Author(s), under exclusive licence to Association of Clinical Biochemists of India 2022. Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.)

The impact of a childhood cancer diagnosis precipitates caregiver's engagement in spiritual coping. This study aimed to explore spirituality among Malaysian Muslim caregivers of children with acute lymphoblastic leukemia. A total of 13 eligible caregivers participated in this qualitative semi-structured interview via purposive sampling. Each interview was audio recorded, transcribed verbatim, and analyzed using NVivo 12 via thematic analysis. Three main themes revolved around hope through the act of praying and recitation (du'ā' and dhikr), acceptance of God's will (redha), and faith toward God as the Provider of sustenance (rezeki). The findings of this study contribute to a holistic supportive care system in pediatric oncology as it informs health care providers the role of spirituality in mitigating the emotional impact of a cancer diagnosis and promoting psychological adaptation. As a multicultural country, future studies may explore spirituality in other cultures and religion in the country.

Introduction: Percutaneous endoscopic gastrostomy (PEG) tube insertion is a widely utilized enteral access technique offering long-term nutritional support for patients unable to tolerate oral intake. While the PEG tube provides numerous advantages, adherence to evidence-based guidelines is crucial to minimize complications. This study aims to evaluate adherence to PEG tube insertion guidelines and analyze associated complication rates in a tertiary care setting., Methods: A retrospective clinical audit was conducted at Quaid-e-Azam International Hospital, Islamabad. Data were collected over three years from patients undergoing PEG tube insertion by a single consultant gastrointestinal surgeon. Adherence to guidelines was evaluated using a 10-item checklist developed based on European Society of Gastrointestinal Endoscopy (ESGE) guidelines. Complication rates and patient characteristics were analyzed., Results: The study included 70 participants (mean age = 72.21 ± 13.17). The PEG tube insertion rate was 100%. The mean checklist score was 8.34 ± 1.2. Laboratory investigations were performed for 98.6% of patients. 91.4% of patients had a life expectancy exceeding 30 days. 60% of patients received an anticoagulation hold. Prophylactic antibiotics were administered to 90% of patients. Psychological counseling and dietician consultation were offered to 38.6% and 64.2% of patients, respectively. Caregivers received specialized training in 98.5% of cases. 12.8% of patients experienced early complications post-procedure, and 14.2% experienced late complications. PEG tube removal occurred in 27% of patients, with only one patient experiencing complications after removal., Conclusion: Adherence to PEG tube insertion guidelines was observed in various aspects of patient care, resulting in a low incidence of complications. Comprehensive auditing and guideline adherence are essential to ensure optimal patient safety and procedural outcomes., Competing Interests: The authors have declared that no competing interests exist., (Copyright © 2023, Ahmad et al.)

Background: Our present study was to investigate the methylation and Gene expression of the vitamin D receptor (VDR) gene in the causing T2DM and to determine the inflammatory biomarkers in exaggerating T2DM in Kashmiri population., Methods: In this study, T2DM cases ( n  = 100) and controls ( n  = 100) of Kashmiri population were designed. Blood samples were taken from both groups, and serum vitamin D levels, inflammatory biomarkers (TNF-α, IL-6, IL-10, CRP, Leptin and adiponectin) were estimated by ELISA. By using methylation-specific PCR (MS-PCR) and RT-PCR, respectively, the levels of methylation and expression were measured after the extraction of DNA and RNA., Results: Studies using RT-PCR demonstrated that patients with diabetes had a lower degree of VDR expression than control subjects ( P  > 0.05). The T2DM was shown to be strongly correlated with hypermethylation ( p -value < 0.001, OR 2.9; 95%CI 1.6-5.54). When compared to control groups, T2DM patients' levels of vitamin D in their serum were considerably lower ( p  < 0.01). Pro-inflammatory mediators like TNF-α, CRP, IL-6, and leptin levels were discovered to be higher, and concentrations of anti-inflammatory mediators like IL-10 and adiponectin were observed to be lower in people with T2DM than in people without the condition ( p  < 0.05)., Conclusions: This study suggests the hypermethylation and down expression of VDR as one of the basis for causing T2DM in kashmiri individuals, exaggerated by enhanced degree of TNF-α, CRP, IL-6 and leptin and diminished concentration of IL-10 and adiponectin in T2DM., Supplementary Information: The online version contains supplementary material available at 10.1007/s40200-023-01266-6., Competing Interests: Conflict of interestAccording to the authors, there are not any conflicts of interest in this research., (© The Author(s), under exclusive licence to Tehran University of Medical Sciences 2023. Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.)

As per Internet world stats, with 560 million Internet users, India is the second largest online market in the world, ranked only behind China. Out of these 560 million Internet users in India, almost 375 million people use social media. These facts are enough to highlight the deep penetration of Internet and social media in Indian society. This deep penetration of social media among the Indian workers has further more deepened in the era of COVID-19. The employees are working from home, so they are more prone to use mobile and social media platforms for non-work-related purposes. It is a proven fact that social media has not only impacted our personal lives but also professional lives in more than one ways. Despite the previously mentioned staggering figures which show the deep penetration of Internet and social media in our Indian society, sufficient studies/researches have not been conducted to study the impact of social media on our professional lives. Keeping in mind these things, the purpose of this study is to understand the impact of social media on one of the most crucial aspects of our professional lives, i.e., labour productivity which is quite crucial not only for the success of individuals and business organizations but also for the economic growth of any country. This study also tries to highlight the other related aspects of social media usage at workplace like the perception of the employees regarding use of social media at workplace, purpose for which social media is being used by the employees and other such related issues. Primary data have been used in this study; collected through a survey from the professionals/employees who hail from different sectors/industries. The authors have used convenient sampling method to collect data to examine the impact of social media usage on the productivity of the employees in the era of COVID-19. The findings of this study offer practical insights about the various impacts of social media on work life of the employees and how their working lives have changed while working from home in the era of COVID-19. This study also offers suggestions about harnessing the benefits and minimizing the side-effects of social media usage at workplace. Both the employees and the organizations can equally take advantage of this report., Competing Interests: Conflict of interestAll authors declare no competing interests., (© The Author(s), under exclusive licence to Springer Nature Switzerland AG 2022, Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.)

Purpose: Minimum segment width (MSW) plays a fundamental role in the shaping of optimized apertures and creation of segments of varying sizes and shapes in complex radiotherapy treatment plans. The purpose of this work was to study the effect of MSW on dose distribution in patients planned with VMAT for various treatment sites using dose volume histogram (DVH) analysis., Materials and Methods: For the validation of optimum MSW, 125 clinical treatment plans were evaluated. Five groups were identified (brain, head and neck, thorax, pelvis, and extremity), and five cases were chosen from each group. For each case, five plans were created with different MSW (0.5, 0.8, 1.0, 1.25, and 1.5 cm). The quality of treatment plans created using different MSW were compared using dosimetric indicators such as target coverage (D 98 -dose to 98% of the planning target volume (PTV), maximum dose (D 2 -maximum dose to 2% of the PTV), monitor units (MU), and DVH parameters related to organs at risk (OAR). The effect of the MSW on delivery accuracy was quantitatively analyzed using the measured fluence utilizing ionization chamber-based transmission detector and model-based dose verification system. Traditional global gamma analysis (2%, 2 mm) and dose volume information was gathered for the PTV and organs at risk and compared for different MSWs., Results: A total of 125 plans were created and compared across five groups. In terms of treatment plan quality, the plans using MSW of 0.5 cm was found to be superior in all groups. PTV coverage (D 98 ) decreased significantly (p < 0.05) as the MSW increased. Similarly, the maximum dose (D 2 ) was found to be increased significantly (p < 0.05) as the MSW increased from 0.5 cm, with MSW of 1.5 cm being the least in terms of plan quality for both PTVs and OARs. In terms of plan deliverability using DVH analysis, treatment planning system (TPS) compared to measured fluence, VMAT plans produced with MSW of 0.5 cm showed a better dosimetric index and a smaller deviation for both PTVs and OARs. The deliverability of the plans deteriorated as the MSW increased., Conclusion: Dose volume histogram (DVH) analysis demonstrated that treatment plans with minimal MSW showed better plan quality and deliverability and provided clinical relevance as compared to gamma index analysis., (© 2021 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, LLC on behalf of The American Association of Physicists in Medicine.)

A new adsorbent was prepared from municipal wastes (a mixture of Corn Stover, Paper Waste, and Yard Waste) by cationization with 3 ̶ Chloro ̶ 2 ̶ Hydroxypropyl Trimethylammonium Chloride. The FTIR spectrum confirmed the quaternary ammonium group's presence on the adsorbent surface (1450 cm -1 ). The maximum adsorption capacity (148 mg/g) was higher than the earlier reported values. Liu isotherm described well the adsorption process, with a high R 2 adj value (0.997). The pseudo-first-order equation fits well for kinetic data, and thermodynamic experiments demonstrated the endothermic nature of the adsorption. The deep neural network (DNN) is applied to simulate the adsorption process, which outperformed the classical machine learning and shallow neural network models. The DNN model predicted accurately the adsorption process with the lowest deviation from the actual values with Mean Absolute Error (MAE = 3.2), Root Mean Squared Error (RMSE = 4.89), and the highest performance accuracy of R 2 (0.96) as compared to various classical ML algorithms such as Linear Regressions (MAE = 12.53, RMSE = 18.01, R 2 = 0.42), Random Forest (MAE = 5.81, RMSE = 10.05, R 2 = 0.82), and Extra Trees (MAE = 4.35, RMSE = 8.22, R 2 = 0.88). The utilized DNN model can be used for predicting the removal efficiency of dyes for various combinations of input parameters without going through laboratory experiments., (Copyright © 2020 Elsevier B.V. All rights reserved.)

A series of diketo esters and their pertinent bioisosteres were designed and synthesized as potent antibacterial agents by targeting methionine amino peptidases (MetAPs). In the biochemical assay against purified MetAPs from Streptococcus pneumoniae (SpMetAP1a), Mycobacterium tuberculosis (MtMetAP1c), Enterococcus faecalis (EfMetAP1a) and human (HsMetAP1b), compounds 3a, 4a and 5a showed more than 85% inhibition of all the tested MetAPs at 100 μM concentration. Compounds 4a and 5a also exhibited antibacterial potential with MIC values 62.5 μg/mL (S. pneumoniae), 31.25 μg/mL (E. faecalis), 62.5 μg/mL (Escherichia coli) and 62.5 μg/mL (S. pneumoniae), 62.5 μg/mL (E. coli), respectively. Moreover, 5a also significantly inhibited the growth of multidrug resistant E. coli strains at 512 μg/mL conc., while showing no cytotoxic effect towards healthy CHO cells and thus being selected. Growth kinetics study showed significant inhibition of bacterial growth when treated with different conc. of 5a. TEM analysis also displayed vital damage to bacterial cells by 5a at MIC conc. Moreover, significant inhibition of biofilm formation was observed in bacterial cells treated with MIC conc. of 5a as visualized by SEM micrographs. Interestingly, 5a did not cause an alteration in the hemocyte density in Galleria mellonella larvae which is considered in vivo model for antimicrobial studies and was non-toxic up to a conc. of 2.5 mg/mL., (Copyright © 2018 Elsevier Masson SAS. All rights reserved.)

Purpose: Acute exposure of experimental animals to waterpipe tobacco smoke has been shown to induce lung inflammation and injury. The aim of this study was to investigate the effect of chronic exposure to waterpipe smoke on inflammatory markers and oxidative stress in the mouse lung., Method: Using a whole-body exposure system, animals were exposed to waterpipe smoke for 6 weeks with a one-hour daily exposure for 5 days a week., Results: Exposure to waterpipe tobacco smoke induced the recruitment of inflammatory cells to the airway. Significant elevation in macrophages, lymphocytes and neutrophils was detected in the bronchoalveolar lavage fluid of exposed animals (P < 0.01). Furthermore, levels of catalase, glutathione peroxidase (GPx) and superoxide dismutase (SOD) in the lung homogenates were elevated (P < 0.05). Finally, waterpipe smoking altered the levels of a panel of inflammatory cytokines including TNFα, IL-1 β, IL-6, IL-10 and IL-12 biomarkers in the lung of exposed animals (P < 0.05)., Conclusion: These results support the notion that waterpipe tobacco smoking exerts harmful respiratory health effects., (Copyright © 2018 Elsevier Inc. All rights reserved.)

Background: The incorporation of two different monomers, having different properties, in the same polymer molecule leads to the formation of new materials with great scientific and commercial importance. The basic requirements for polymeric materials in some areas of biomedical applications are that they are hydrophilic, having good mechanical and thermal properties, soft, and oxygen-permeable., Results: A series of 3-(trimethoxysilyl) propyl methacrylate/N-vinyl pyrrolidone (TMSPM/NVP) xerogels containing different concentration of ethylene glycol dimethacrylate (EGDMA) as crosslinking agent were prepared by bulk polymerization to high conversion using BPO as initiator. The copolymers were characterized by FTIR. The corresponding hydrogels were obtained by swelling the xerogels in deionized water to equilibrium. Addition of EGDMA increases the transparency of xerogels and hydrogels. The minimum amount of EGDMA required to produce a transparent xerogel is 1%. All the Swelling parameters, including water content (EWC), volume fraction of polymer (ϕ 2 ) and weight loss during swelling decrease with increasing EGDMA. Young's and shear modulus (E and G) increase as EGDMA increases. The hydrogels were characterized in terms of modulus cross-linking density (v e and v t ) and polymer-solvent interaction parameters (χ). Thermal properties include TGA and glass transition temperature (T g ) enhance by adding EGDMA whereas the oxygen permeability (P) of hydrogels decreases as water content decrease., Conclusions: This study prepared and studied the properties for new copolymer (TMSPM-co-NVP) contains different amounts of (EGDMA). These copolymers possess new properties with potential use in different biomedical applications. The properties of the prepared hydrogels are fit with the standard properties of materials which should be used for contact lenses.

According to WHO, leishmaniasis is a major tropical disease, ranking second after malaria. Significant efforts have been therefore invested into finding potent inhibitors for the treatment. In this work, eighteen novel 1,2,3-triazoles appended with l-amino acid (Phe/Pro/Trp) tail were synthesized via azide-alkyne click chemistry with moderate to good yield, and evaluated for their anti-leishmanial activity against promastigote form of Leishmania donovani (Dd8 strain). Among all, compounds 40, 43, and 53 were identified with promising anti-leishmanial activity with IC 50 =88.83±2.93, 96.88±12.88 and 94.45±6.51μM respectively and displayed no cytotoxicity towards macrophage cells. Moreover, compound 43 showed highest selectivity index (SI=8.05) among all the tested compounds. Supported by docking studies, the lead inhibitors (40, 43 and 53) showed interactions with key residues in the catalytic site of trypanothione reductase. The results of pharmacokinetic parameters suggest that these selected inhibitors can be carried forward for further structural optimization and pharmacological investigation., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Aim: To assess the outcome of mineral trioxide aggregate (MTA) complete pulpotomy in permanent teeth with carious exposures., Methodology: Fifty-two permanent molar teeth with fully developed roots and vital pulps in 43 patients aged 11-51 years were included. Preoperative pulpal and periapical diagnosis was established. After informed consent, each tooth was anaesthetized, isolated with dental dam and disinfected with 5% NaOCl before caries excavation; subsequently, a full pulpotomy was performed. Haemostasis was achieved, and Grey MTA (Angelus, Londrina, Brazil) was placed as the pulpotomy agent; a moist cotton pellet was placed, and the tooth was temporized with the intermediate restorative material (IRM). Permanent restorations were placed 1 week later if the tooth was asymptomatic, and a postoperative periapical radiograph was taken. Clinical and radiographic evaluation was completed at 3 months, 6 months, 1 year and 3 years postoperatively., Results: Clinical signs and symptoms suggestive of irreversible pulpitis were established in 44/52 teeth, and periapical rarefaction was present in 14 teeth. Immediate failure occurred in one tooth. The recall rate ranged from 92% at 3 months to 80.3% at 3 years, with an overall 100% clinical and 97.5% radiographic success during the first year, and 92.7% success at 3 years. All cases with periapical rarefaction were associated with improvement in the periapical index (PAI) score. Two cases had new periapical rarefaction associated with dislodgment of the permanent restoration. A hard tissue barrier was detected radiographically in 5 cases and canal narrowing in 7 cases., Conclusion: MTA full pulpotomy was a successful treatment option for cariously exposed pulps in mature permanent molar teeth., (© 2015 International Endodontic Journal. Published by John Wiley & Sons Ltd.)

Acute coronary syndrome (ACS) is characterized by unstable plaque with thrombotic process involving central role of platelets. The diagnosis and prediction of significant coronary artery disease (CAD) in non-ST-elevation ACS (NSTE-ACS) can be challenging. The central role of platelets in acute atherothrombosis in NSTE-ACS spurred appreciable interest in the diagnostic and predictive role of platelet activity. Mean platelet volume (MPV) is one of the most promising laboratory markers in patients with CAD. This retrospective study was designed to investigate the diagnostic and predictive value of high MPV levels in patients with NSTE-ACS with significant CAD. A total of 213 patients (men 53%, mean age 61 ± 12.3 years) with NSTE-ACS were enrolled from 2011 to 2016 from 2 teaching hospitals. Patients' demographic, laboratory, and angiographic data were collected. Significant CAD was defined as ≥70% stenosis in at least 1 major coronary artery. Patients with high MPV (MPV ≥9 fl) had more significant CAD (55% vs 35%, p = 0.005), lower platelet count (204 ± 59 × 1,000/μl vs 246 ± 56 × 1,000/μl, p = 0.001), and higher HbA1c (6.9 vs 6.4, p = 0.02). Patients with significant CAD had higher MPV level (9.2 ± 1.07 vs 8.6 ± 1.03 fl, p = 0.001), higher MPV/platelet ratio (0.46 vs 0.40, p = 0.01), older age (64.5 ± 11 vs 59.2 ± 12 years, p = 0.02), and lower high-density lipoprotein level (42 ± 12 vs 47 ± 16, p = 0.01). Multivariate analysis showed that increased age, high MPV, high troponin, and low high-density lipoprotein levels were associated with significant CAD. Patients with high MPV along with high troponin level demonstrated a 4.8-fold increased risk for significant CAD compared to those with normal MPV and high troponin (odds ratio 4.8, 95% confidence interval 1.31 to 17.6, p = 0.001). In conclusion, considering high MPV in the context of elevated troponin level increases the predictive value of screening for significant CAD, and this result may help determine who is most likely to benefit from cardiac catheterization., (Copyright © 2016 Elsevier Inc. All rights reserved.)

The synthesis of copper nanoparticles was carried out with gelatin as a stabilizer by reducing CuSO 4 .5H 2 O ions using hydrazine. Ascorbic acid and aqueous NaOH were also used as an antioxidant and pH controller, respectively. The effects of NaOH, hydrazine, and concentration of gelatin as stabilizer were studied. The synthesized copper nanoparticles were characterized by UV-vis spectroscopy, XRD, zeta potential measurements, FTIR, EDX, FESEM, and TEM. The formation of CuNPs@Gelatin is initially confirmed by UV-vis spectroscopic analysis with the characteristic band at 583 nm. XRD and TEM reports revealed that CuNPs@Gelatin (0.75 wt.%) is highly crystalline and spherical in shape with optimum average size of 4.21 ± 0.95 nm. FTIR studies indicated the presence of amide group on the surface of the CuNPs indicating the stability of CuNPs which is further supported by zeta potential measurements with the negative optimum value of -37.90 ± 0.6 mV. The CuNPs@G4 showed a good catalytic activity against methylene blue (MB) reduction using NaBH 4 as a reducing agent in an aqueous solution. The best enhanced properties of CuNPs@G4 were found for the 0.75 wt.% gelatin concentration. Thermodynamic parameters (ΔH and ΔS) indicate that under the studied temperature, the reduction of MB by CuNPs@G4 is not feasible and had endothermic in nature.

Nanocomposites of zinc oxide loaded on a zeolite (Zeolite/ZnO NCs) were prepared using co-precipitation method. The ratio effect of ZnO wt.% to the Zeolite on the antibacterial activities was investigated. Various techniques were used for the nanocomposite characterization, including UV-vis, FTIR, XRD, EDX, FESEM and TEM. XRD patterns showed that ZnO peak intensity increased while the intensities of Zeolite peaks decreased. TEM images indicated a good distribution of ZnO-NPs onto the Zeolite framework and the cubic structure of the zeolite was maintained. The average particle size of ZnO-nanoparticles loaded on the surface of the Zeolite was in the range of 1-10nm. Moreover, Zeolite/ZnO NCs showed noticeable antibacterial activities against the tested bacteria; Gram- positive and Gram- negative bacteria, under normal light. The efficiency of the antibacterial increased with increasing the wt.% from 3 to 8 of ZnO NPs, and it reached 87% against Escherichia coli E266., (Copyright © 2016 Elsevier B.V. All rights reserved.)

A green sonochemical method was developed for preparing silver nanoparticles (Ag-NPs) in different concentrations of kappa carrageenan (κ-carrageenan). The κ-carrageenan was used as a natural eco-friendly stabilizer, and ultrasonic irradiation was used as a green reducing agent. The number of Ag-NPs increased with increasing κ-carrageenan concentrations. Formation of Ag/κ-carrageenan was determined by UV-visible spectroscopy where the surface plasmon absorption maximum was observed at 402 to 420 nm. The X-ray diffraction (XRD) analysis showed that the Ag-NPs are of a face-centered cubic structure. The Fourier transform infrared (FT-IR) spectrum indicated the presence of Ag-NPs in κ-carrageenan. Transmission electron microscopy (TEM) image for the highest concentration of κ-carrageenan showed the distribution of Ag-NPs with an average particle size near to 4.21 nm. Scan electron microscopy (SEM) images illustrated the spherical shape of the Ag-NPs. The use of photo irradiation provides a green and economic feature to this work.

Background: Green approach in synthesizing metal nanoparticles has gain new interest from the researchers as metal nanoparticles were widely applied in medical equipment and household products. The use of plants in the synthesis of nanoparticles emerges as a cost effective and eco-friendly approach. A green synthetic route for the production of stable silver nanoparticles (Ag-NPs) by using aqueous silver nitrate as metal precursor and Artocarpus elasticus stem bark extract act both as reductant and stabilizer is being reported for the first time., Results: The resultant Ag-NPs were characterized by UV-vis spectroscopy, powder X-Ray diffraction, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier-transform infra-red (FT-IR). The morphological study by TEM and SEM shows resultant Ag-NPs in spherical form with an average size of 5.81 ± 3.80, 6.95 ± 5.50, 12.39 ± 9.51, and 19.74 ± 9.70 nm at 3, 6, 24, and 48 h. Powder X-ray diffraction showed that the particles are crystalline in nature, with a face-centered cubic structure. The FT-IR spectrum shows prominent peaks appeared corresponds to different functional groups involved in synthesizing Ag-NPs., Conclusions: Ag-NPs were synthesized using a simple and biosynthetic method by using methanolic extract of A. elasticus under room temperature, at different reaction time. The diameters of the biosynthesis Ag-NPs depended on the time of reaction. Thus, with the increase of reaction time in the room temperature the size of Ag-NPs increases. From the results obtained in this effort, one can affirm that A. elasticus can play an important role in the bioreduction and stabilization of silver ions to Ag-NPs.Graphical abstract:Figure illustrates stabilization of silver nanoparticles after formation by A. elasticus stem bark extract.

Over the past few decades, there has been an increasing demand for bio-based polymers and resins in industrial applications, due to their potential lower cost and environmental impact compared with petroleum-based counterparts. The present research concerns the synthesis of epoxidized palm oil acrylate (EPOLA) from an epoxidized palm oil product (EPOP) as environmentally friendly material. EPOP was acrylated by acrylic acid via a ring opening reaction. The kinetics of the acrylation reaction were monitored throughout the reaction course and the acid value of the reaction mixture reached 10 mg KOH/g after 16 h, indicating the consumption of the acrylic acid. The obtained epoxy acrylate was investigated intensively by means of FTIR and NMR spectroscopy, and the results revealed that the ring opening reaction was completed successfully with an acrylation yield about 82%. The UV free radical polymerization of EPOLA was carried out using two types of photoinitiators. The radiation curing behavior was determined by following the conversion of the acrylate groups. The cross-linking density and the hardness of the cured EPOLA films were measured to evaluate the effect of the photoinitiator on the solid film characteristics, besides, the thermal and mechanical properties were also evaluated.

Rice straw/magnetic nanocomposites (RS/Fe3O4-NCs) were prepared via co-precipitation method for removal of Pb(II) and Cu(II) from aqueous solutions. Response surface methodology (RSM) was utilized to find the optimum conditions for removal of ions. The effects of three independent variables including initial ion concentration, removal time, and adsorbent dosage were investigated on the maximum adsorption of Pb (II) and Cu (II). The optimum conditions for the adsorption of Pb(II) and Cu(II) were obtained (100 and 60 mg/L) of initial ion concentration, (41.96 and 59.35 s) of removal time and 0.13 g of adsorbent for both ions, respectively. The maximum removal efficiencies of Pb(II) and Cu(II) were obtained 96.25% and 75.54%, respectively. In the equilibrium isotherm study, the adsorption data fitted well with the Langmuir isotherm model. The adsorption kinetics was best depicted by the pseudo-second order model. Desorption experiments showed adsorbent can be reused successfully for three adsorption-desorption cycles.

Tacazzea apiculata is used by traditional medical practitioners for the treatment of wide range of diseases. The current work investigated the hypoglycemic and antioxidant properties of Tacazzea apiculata Oliv. on alloxan induced diabetes mellitus. Five groups (n=10) of rats were fed on commercial diet. The rats were divided into Group 1 (NUT) as non-diabetic and untreated, group 2 (NDT) as non-diabetic and treated, group 3 (DT) diabetic and treated. Group 4 (DUT) as diabetic and untreated. Group five (CP) were diabetic treated with Chlorpropamide, a drug used in the management of diabetic mellitus, with no known antioxidant property. Diabetic induction was done by intra-peritoneal injection of 100 mg/kg b. wt with alloxan. Fasting blood glucose was estimated seven days after induction to determine the severity of glucose elevation among the induced groups. Methanolic extract of T. apiculata leaf was administered to alloxan induced diabetic and non-diabetic control rats at 100mg/kg body weight for four weeks and blood glucose estimated on weekly basis. Malondialdehyde level was also estimated in the sera of the rats. Blood glucose level was monitored for additional 2 weeks post treatment. The results indicated that the extracts possess significant hypoglycemic effect on the diabetic rats (DT) having the mean glucose of (95.2 ± 9.12 mg/dl) compared to the diabetic untreated control group (DUT) with a mean glucose of (238.91 ± 4.42 mg/dl, p<0.05). The effect was sustained even on withdrawal of the extracts for two weeks. This was accompanied by a progressive increase in weight among all treated diabetic rats and non diabetic treated (DT and NDT) compared with diabetic untreated control rat (DUT) (p<0.05). A raised level in malondialdehyde was also observed among the diabetic rat prior to treatment and significantly decreased after the treatment. In conclusion the research demonstrated the hypoglycaemic and antioxidant potential of methanolic leaf extract of T. apiculata in alloxan induced rats.

Modified rice straw/Fe3O4/polycaprolactone nanocomposites (ORS/Fe3O4/ PCL-NCs) have been prepared for the first time using a solution casting method. The RS/Fe3O4-NCs were modified with octadecylamine (ODA) as an organic modifier. The prepared NCs were characterized by using X-ray powder diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FT-IR). The XRD results showed that as the intensity of the peaks decreased with the increase of ORS/Fe3O4-NCs content in comparison with PCL peaks, the Fe3O4-NPs peaks increased from 1.0 to 60.0 wt. %. The TEM and SEM results showed a good dispersion of ORS/Fe3O4-NCs in the PCL matrix and the spherical shape of the NPs. The TGA analysis indicated thermal stability of ORS/Fe3O4-NCs increased after incorporation with PCL but the thermal stability of ORS/Fe3O4/PCL-NCs decreased with the increase of ORS/Fe3O4-NCs content. Tensile strength was improved with the addition of 5.0 wt. % of ORS/Fe3O4-NCs. The antibacterial activities of the ORS/Fe3O4/PCL-NC films were examined against Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus) by diffusion method using nutrient agar. The results indicated that ORS/Fe3O4/PCL-NC films possessed a strong antibacterial activity with the increase in the percentage of ORS/Fe3O4-NCs in the PCL.

Fe3O4/talc nanocomposite was used for removal of Cu(II), Ni(II), and Pb(II) ions from aqueous solutions. Experiments were designed by response surface methodology (RSM) and a quadratic model was used to predict the variables. The adsorption parameters such as adsorbent dosage, removal time, and initial ion concentration were used as the independent variables and their effects on heavy metal ion removal were investigated. Analysis of variance was incorporated to judge the adequacy of the models. Optimal conditions with initial heavy metal ion concentration of 100, 92 and 270 mg/L, 120 s of removal time and 0.12 g of adsorbent amount resulted in 72.15%, 50.23%, and 91.35% removal efficiency for Cu(II), Ni(II), and Pb(II), respectively. The predictions of the model were in good agreement with experimental results and the Fe3O4/talc nanocomposite was successfully used to remove heavy metals from aqueous solutions.

In this study, cellulose nanocrystals/zinc oxide (CNCs/ZnO) nanocomposites were dispersed as bifunctional nano-sized fillers into poly(vinyl alcohol) (PVA) and chitosan (Cs) blend by a solvent casting method to prepare PVA/Cs/CNCs/ZnO bio-nanocomposites films. The morphology, thermal, mechanical and UV-vis absorption properties, as well antimicrobial effects of the bio-nanocomposite films were investigated. It demonstrated that CNCs/ZnO were compatible with PVA/Cs and dispersed homogeneously in the polymer blend matrix. CNCs/ZnO improved tensile strength and modulus of PVA/Cs significantly. Tensile strength and modulus of bio-nanocomposite films increased from 55.0 to 153.2 MPa and from 395 to 932 MPa, respectively with increasing nano-sized filler amount from 0 to 5.0 wt %. The thermal stability of PVA/Cs was also enhanced at 1.0 wt % CNCs/ZnO loading. UV light can be efficiently absorbed by incorporating ZnO nanoparticles into a PVA/Cs matrix, signifying that these bio-nanocomposite films show good UV-shielding effects. Moreover, the biocomposites films showed antibacterial activity toward the bacterial species Salmonella choleraesuis and Staphylococcus aureus. The improved physical properties obtained by incorporating CNCs/ZnO can be useful in variety uses.

Biological synthesis of nanoparticles is a relatively new emerging field of nanotechnology which has economic and eco-friendly benefits over chemical and physical processes of synthesis. In the present work, for the first time, the brown marine algae Sargassum muticum ( S. muticum ) aqueous extract was used as a reducing agent for the synthesis of nanostructure silver particles (Ag-NPs). Structural, morphological and optical properties of the synthesized nanoparticles have been characterized systematically by using FTIR, XRD, TEM and UV-Vis spectroscopy. The formation of Ag-NPs was confirmed through the presence of an intense absorption peak at 420 nm using a UV-visible spectrophotometer. A TEM image showed that the particles are spherical in shape with size ranging from 5 to 15 nm. The nanoparticles were crystalline in nature. This was confirmed by the XRD pattern. From the FTIR results, it can be seen that the reduction has mostly been carried out by sulphated polysaccharides present in S. muticum .

Superparamagnetic iron oxide nanoparticles (MNPs) with appropriate surface chemistry exhibit many interesting properties that can be exploited in a variety of biomedical applications such as magnetic resonance imaging contrast enhancement, tissue repair, hyperthermia, drug delivery and in cell separation. These applications required that the MNPs such as iron oxide Fe₃O₄ magnetic nanoparticles (Fe₃O₄ MNPs) having high magnetization values and particle size smaller than 100 nm. This paper reports the experimental detail for preparation of monodisperse oleic acid (OA)-coated Fe₃O₄ MNPs by chemical co-precipitation method to determine the optimum pH, initial temperature and stirring speed in order to obtain the MNPs with small particle size and size distribution that is needed for biomedical applications. The obtained nanoparticles were characterized by Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-ray fluorescence spectrometry (EDXRF), thermogravimetric analysis (TGA), X-ray powder diffraction (XRD), and vibrating sample magnetometer (VSM). The results show that the particle size as well as the magnetization of the MNPs was very much dependent on pH, initial temperature of Fe²⁺ and Fe³⁺ solutions and steering speed. The monodisperse Fe₃O₄ MNPs coated with oleic acid with size of 7.8 ± 1.9 nm were successfully prepared at optimum pH 11, initial temperature of 45°C and at stirring rate of 800 rpm. FTIR and XRD data reveal that the oleic acid molecules were adsorbed on the magnetic nanoparticles by chemisorption. Analyses of TEM show the oleic acid provided the Fe₃O₄ particles with better dispersibility. The synthesized Fe₃O₄ nanoparticles exhibited superparamagnetic behavior and the saturation magnetization of the Fe₃O₄ nanoparticles increased with the particle size.

Synthesis of ZnO-Ag heterostructure nanoparticles was carried out by a precipitation method with cellulose nanocrystals (CNCs) as a stabilizer for antimicrobial and thermal studies. ZnO-Ag nanoparticles were obtained from various weight percentages of added AgNO₃ relative to Zn precursors for evaluating the best composition with enhanced functional properties. The ZnO-Ag/CNCs samples were characterized systematically by TEM, XRD, UV, TGA and DTG. From the TEM studies we observed that ZnO-Ag heterostructure nanoparticles have spherical shapes with size diameters in a 9-35 nm range. The antibacterial activities of samples were assessed against the bacterial species Salmonella choleraesuis and Staphylococcus aureus. The CNC-stabilized ZnO-Ag exhibited greater bactericidal activity compared to cellulose-free ZnO-Ag heterostructure nanoparticles of the same particle size. The incorporation of ZnO-Ag hetreostructure nanoparticles significantly increased the thermal stability of cellulose nanocrystals.

The synthesis of nanoparticles has become a matter of great interest in recent times due to their various advantageous properties and applications in a variety of fields. The exploitation of different plant materials for the biosynthesis of nanoparticles is considered a green technology because it does not involve any harmful chemicals. In this study, iron oxide nanoparticles (Fe3O4-NPs) were synthesized using a rapid, single step and completely green biosynthetic method by reduction of ferric chloride solution with brown seaweed (BS, Sargassum muticum) water extract containing sulphated polysaccharides as a main factor which acts as reducing agent and efficient stabilizer. The structural and properties of the Fe3O4-NPs were investigated by X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy (FESEM), energy dispersive X-ray fluorescence spectrometry (EDXRF), vibrating sample magnetometry (VSM) and transmission electron microscopy. The average particle diameter as determined by TEM was found to be 18 ± 4 nm. X-ray diffraction showed that the nanoparticles are crystalline in nature, with a cubic shape. The nanoparticles synthesized through this biosynthesis method can potentially useful in various applications.

This study focuses on the fabrication and electrical characterization of a polymer composite based on nano-sized varistor powder. The polymer composite was fabricated by the melt-blending method. The developed nano-composite was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FeSEM), and energy-dispersive X-ray spectroscopy (EDAX). The XRD pattern revealed the crystallinity of the composite. The XRD study also showed the presence of secondary phases due to the substitution of zinc by other cations, such as bismuth and manganese. The TEM picture of the sample revealed the distribution of the spherical, nano-sized, filler particles throughout the matrix, which were in the 10-50 nm range with an average of approximately 11 nm. The presence of a bismuth-rich phase and a ZnO matrix phase in the ZnO-based varistor powder was confirmed by FeSEM images and EDX spectra. From the current-voltage curves, the non-linear coefficient of the varistor polymer composite with 70 wt% of nano filler was 3.57, and its electrical resistivity after the onset point was 861 KΩ. The non-linear coefficient was 1.11 in the sample with 100 wt% polymer content. Thus, it was concluded that the composites established a better electrical non-linearity at higher filler amounts due to the nano-metric structure and closer particle linkages.

Background: This study aims to investigate the influence of different stirring times on antibacterial activity of silver nanoparticles in polyethylene glycol (PEG) suspension. The silver nanoparticles (Ag-NPs) were prepared by green synthesis method using green agents, polyethylene glycol (PEG) under moderate temperature at different stirring times. Silver nitrate (AgNO3) was taken as the metal precursor while PEG was used as the solid support and polymeric stabilizer. The antibacterial activity of different sizes of nanosilver was investigated against Gram-positive [Staphylococcus aureus] and Gram-negative bacteria [Salmonella typhimurium SL1344] by the disk diffusion method using Müeller-Hinton Agar., Results: Formation of Ag-NPs was determined by UV-vis spectroscopy where surface plasmon absorption maxima can be observed at 412-437 nm from the UV-vis spectrum. The synthesized nanoparticles were also characterized by X-ray diffraction (XRD). The peaks in the XRD pattern confirmed that the Ag-NPs possessed a face-centered cubic and peaks of contaminated crystalline phases were unable to be located. Transmission electron microscopy (TEM) revealed that Ag-NPs synthesized were in spherical shape. The optimum stirring time to synthesize smallest particle size was 6 hours with mean diameter of 11.23 nm. Zeta potential results indicate that the stability of the Ag-NPs is increases at the 6 h stirring time of reaction. The Fourier transform infrared (FT-IR) spectrum suggested the complexation present between PEG and Ag-NPs. The Ag-NPs in PEG were effective against all bacteria tested. Higher antibacterial activity was observed for Ag-NPs with smaller size. These suggest that Ag-NPs can be employed as an effective bacteria inhibitor and can be applied in medical field., Conclusions: Ag-NPs were successfully synthesized in PEG suspension under moderate temperature at different stirring times. The study clearly showed that the Ag-NPs with different stirring times exhibit inhibition towards the tested gram-positive and gram-negative bacteria.

In this paper, Polyimide/Montmorillonite Nanocomposites (PI/MMT NCs), based on aromatic diamine (4-Aminophenyl sulfone) (APS) and aromatic dianhydride (3,3',4,4'-benzophenonetetracarboxylic dianhydride) (BTDA) were prepared using in situ polymerization and solution-dispersion techniques. The prepared PI/MMT NCs films were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA). The XRD results showed that at the content of 1.0 wt % Organo Montmorillonite (OMMT) for two techniques and 3.0 wt % OMMT for the in situ polymerization technique, the OMMT was well-intercalated, exfoliated and dispersed into polyimide matrix. The OMMT agglomerated when its amount exceeded 10 wt % and 3.0 wt % for solution-dispersion and in situ polymerization techniques respectively. These results were confirmed by the TEM images of the prepared PI/MMT NCs. The TGA thermograms indicated that thermal stability of prepared PI/MMT NCs were increased with the increase of loading that, the effect is higher for the samples prepared by in situ polymerization technique.

Silver nanoparticles (Ag-NPs) have been successfully prepared with simple and "green" synthesis method by reducing Ag(+) ions in aqueous gelatin media with and in the absence of glucose as a reducing agent. In this study, gelatin was used for the first time as a reducing and stabilizing agent. The effect of temperature on particle size of Ag-NPs was also studied. It was found that with increasing temperature the size of nanoparticles is decreased. It was found that the particle size of Ag-NPs obtained in gelatin solutions is smaller than in gelatin-glucose solutions, which can be related to the rate of reduction reaction. X-ray diffraction, ultraviolet-visible spectra, transmission electron microscopy, and atomic force microscopy revealed the formation of monodispersed Ag-NPs with a narrow particle size distribution.

This paper presents the green synthesis of silver nanoparticles (Ag NPs) in aqueous medium. This method was performed by reducing AgNO(3) in different stirring times of reaction at a moderate temperature using green agents, chitosan (Cts) and polyethylene glycol (PEG). In this work, silver nitrate (AgNO(3)) was used as the silver precursor while Cts and PEG were used as the solid support and polymeric stabilizer. The properties of Ag/Cts/PEG nanocomposites (NCs) were studied under different stirring times of reaction. The developed Ag/Cts/PEG NCs were then characterized by the ultraviolet-visible (UV-Vis) spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy.

Silver nanoparticles (Ag-NPs) were successfully synthesized using the UV irradiation of aqueous solutions containing AgNO(3) and gelatin as a silver source and stabilizer, respectively. The UV irradiation times influence the particles' diameter of the Ag-NPs, as evidenced from surface plasmon resonance (SPR) bands and transmission electron microscopy (TEM) images. When the UV irradiation time was increased, the mean size of particles continuously decreased as a result of photoinduced Ag-NPs fragmentation. Based on X-ray diffraction (XRD), the UV-irradiated Ag-NPs were a face-centered cubic (fcc) single crystal without any impurity. This study reveals that the UV irradiation-mediated method is a green chemistry and promising route for the synthesis of stable Ag-NPs for several applications (e.g., medical and surgical devices). The important advantages of this method are that it is cheap, easy, and free of toxic materials.