Search

A theoretical model is developed by exploiting the variational technique to investigate the evolution of an optical beam inside an optically pumped graded-index fiber amplifier. The variational analysis is a semi-analytical method that provides us with a set of coupled ordinary differential equations for the beam's four parameters. Numerical solution of these equations is much faster compared to the underlying multidimensional nonlinear wave equation. We compare the results of the variational and full numerical simulations for the two pumping schemes used commonly for high-power fiber amplifiers. In the clad-pumping scheme, the use of a relatively wide pump beam results in a nearly uniform gain all along the fiber. In the case of edge pumping, a narrower pump beam provides gain that varies both radially and axially along the fiber's length. In both cases, the variational results are found to be in good agreement with time-consuming full numerical simulations. We also derive a single equation for the beam's width that can predict amplification-induced narrowing of the signal beam in most cases of practical interest., Comment: 6 pages, 5 figures

We investigate the spatial beam dynamics inside a multimode graded-index fiber under Raman amplification by adopting a semi-analytical variational approach. The variational analysis provides us with four coupled ordinary differential equations that govern the beam's dynamics under Raman gain and are much faster to solve numerically compared to the full nonlinear wave equation. Their solution also provides considerable physical insight and allows us to study the impact of important nonlinear phenomena such as self-focusing and cross-phase modulation. We first show that the variational results corroborate well with full numerical simulations and then use them to investigate the signal's dynamics under different initial conditions such as the initial widths of the pump and signal beams. This allows us to quantify the conditions under which the quality of a signal beam can improve, without collapse of the beam owing to self-focusing. While time-consuming full simulations may be needed when gain saturation and pump depletion must be included, the variational method is useful for gaining valuable physical insight and for studying dependence of the amplified beam's width and amplitude on various physical parameters in a faster fashion., Comment: 7 pages, 6 figures

Generation of high-repetition-rate, femtosecond, soliton pulse trains through dual-wavelength pumping of a dispersion-decreasing fiber is studied numerically. The achievable shortest pulse width is found to be limited by third-order dispersion that has a significant effect on the pulse-compression dynamics. The output wavelength is red shifted because of intrapulse Raman scattering and depends heavily on third-order dispersion, whose positive values lead to the most red shifted solitons (>25% of the input pump center wavelength). The proposed scheme allows the generation of ultrashort pulse trains at tunable high repetition rates with a wide range of output wavelengths and pulse durations through dispersion engineering. The resulting frequency combs extend over a wide bandwidth with a tunable spacing between the comb lines.

Soliton self-frequency shifts (SSFS) can be suppressed in optical fibers through spectral recoil, but this process leads to losses through continuous transfer of energy to a dispersive wave. We demonstrate a novel way to alter the strength of SSFS in photonic crystal fibers through a frequency-dependent nonlinear parameter $\gamma(\omega)$. Our numerical simulations show both suppression and enhancement of SSFS depending on the sign of nonlinear slope. A large enough positive value of this slope can lead to total suppression of SSFS, without spectral recoil and without energy transfer to a resonant dispersive wave. Numerical simulations are supported by mathematical predictions based on the moment method.

We adopt a variational technique to study the dynamics of perturbed dissipative solitons, whose evolution is governed by a Ginzburg--Landau equation (GLE). As a specific example of such solitons, we consider a silicon-based active waveguide in which free carriers are generated through two-photon absorption. In this case, dissipative solitons are perturbed by physical processes such as third-order dispersion, intrapulse Raman scattering, self-steepening, and free-carrier generation. To solve the variational problem, we adopt the Pereira--Stenflo soliton as an ansatz since this soliton is the exact solution of the unperturbed GLE. With this ansatz, we derive a set of six coupled differential equations exhibiting the dynamics of various pulse parameters. This set of equations provides considerable physical insight in the complex behavior of perturbed dissipative solitons. Its predictions are found to be in good agreement with direct numerical simulations of the GLE. More specifically, the spectral and temporal shifts of the chirped soliton induced by free carriers and intrapulse Raman scattering are predicted quite accurately. We also provide simple analytic expressions of these shifts by making suitable approximations. Our semi-analytic treatment is useful for gaining physical insight into complex soliton-evolution processes., Comment: 8 pages, 5 figures

We study numerically the formation of cascading solitons when femtosecond optical pulses are launched into a fiber amplifier with less energy than required to form a soliton of equal duration. As the pulse is amplified, cascaded fundamental solitons are created at different distances, without soliton fission, as each fundamental soliton moves outside the gain bandwidth through the Raman-induced spectral shifts. As a result, each input pulse creates multiple, temporally separated, ultrashort pulses of different wavelengths at the amplifier output. The number of pulses depends not only on the total gain of the amplifier but also on the width of input pulses., Comment: This paper was published in Optical Society of America and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following url on the OSA website: \url{http://www.osa.org/en-us/home/}. Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law

A mode locked fibre laser as a source of ultra-stable pulse train has revolutionised a wide range of fundamental and applied research areas by offering high peak powers, high repetition rates, femtosecond range pulse widths and a narrow linewidth. However, further progress in linewidth narrowing seems to be limited by the complexity of the carrier-envelope phase control. Here for the first time we demonstrate experimentally and theoretically a new mechanism of resonance vector self-mode locking where tuning in-cavity birefringence leads to excitation of the longitudinal modes sidebands accompanied by the resonance phase locking of sidebands with the adjacent longitudinal modes. An additional resonance with acoustic phonons provides the repetition rate tunability and linewidth narrowing down to Hz range that drastically reduces the complexity of the carrier-envelope phase control and so will open the way to advance lasers in the context of applications in metrology, spectroscopy, microwave photonics, astronomy, and telecommunications., Comment: 13 pages, 3 figures, 1 table

We report on the generation of a Raman cascade spanning the wavelength range of 523 to 1750 nm wavelength range, in a standard telecommunication graded-index multimode optical fiber. Despite the highly multimode nature of the pump, the Raman peaks are generated in specific modes of the fiber, confirming substantial beam cleanup during the stimulated Raman scattering process.

This paper starts by an investigation of nonlinear transmission in space-division multiplexed (SDM) systems using multimode fibers exhibiting a rapidly varying birefringence. A primary objective is to generalize the Manakov equations, well known in the case of single-mode fibers. We first investigate a reference case where linear coupling among the spatial modes of the fiber is weak and after averaging over birefringence fluctuations, we obtain new Manakov equations for multimode fibers. Such an averaging reduces the number of intermodal nonlinear terms drastically since all four-wave-mixing terms average out. Cross-phase modulation terms still affect multimode transmission but their effectiveness is reduced. We then verify the accuracy of our new Manakov equations by transmitting multiple PDM-QPSK signals over different modes of a multimode fiber and comparing the numerical results with those obtained by solving the full stochastic equation. The agreement is excellent in all cases studied. A great benefit of the new equations is to reduce the computation time by a factor of 10 or more. Another important feature observed is that birefringence fluctuations improve system performance by reducing the impact of fiber nonlinearities. Finally multimode fibers with strong random coupling among all spatial modes are considered. Linear coupling is modeled using the random matrix theory approach. We derive new Manakov equations for multimode fibers in that regime and show that such fibers can perform better than single-modes fiber for large number of propagating spatial modes., Comment: Submitted to journal of lightwave technology on the 17-Jul-2012. Ref number: JLT-14391-2012