Search

The aim of this study was accuracy assessment of placed implants in full-arch cases using specific software and hardware to perform static computer-assisted implantology and immediately loaded prostheses. The degree of deviation existing between planned and achieved implants was carried out by a new noninvasive measurement procedure of the implant position performed on stone casts.Fourteen stone casts retrieved from 14 full-arch fully guided implant treatments were selected to perform the study. Each cast, manufactured for the surgical treatment by using a specific laboratory kit, was obtained from the respective surgical guide. A sleeve for each implant was embedded into the guide, which helped the examiners to manufacture a stone cast per guide containing the implant analogs, which was used to recover the final position of the planned implants. A total sample of 60 implants were assessed. The postoperative casts, poured to produce the immediate prostheses, were then processed by a contact (or tactile) scanner, and the generated standard tessellation language (STL) files were overlapped (best-fit alignment) using engineering software that revealed all the measured discrepancies. In terms of accuracy, differences relating to arch, assessed bone quality, implant length, and drill length (prolongation short or long) were reported.The use of a noninvasive tactile scanner revealed mean entry point horizontal deviations of 0.30 mm (SD: 0.39 mm), mean entry point vertical deviations of 0.20 mm (SD: 0.25 mm), mean apical horizontal deviations of 0.50 mm (SD: 0.73 mm), and mean apical vertical deviations of 0.24 mm (SD: 0.28 mm). The frontal and lateral angular deviations were investigated, and corresponding mean values of 1.99 degrees (SD: 2.30 degrees) and 1.80 degrees (SD: 2.44 degrees) were detected.The reported results demonstrate that the contact tactile scan is a viable and biologic way to assess implant deviations.

This retrospective study evaluates the clinical and radiographic outcomes of simultaneous guided bone regeneration (GBR) and implant placement procedures in the rehabilitation of partially edentulous and horizontally atrophic dental arches using resorbable membranes. A total of 49 patients were included, and 97 implants were placed. Patients were followed up for 3 to 7 years after loading. The data indicate that GBR with simultaneous implant placement and resorbable membranes can be a good clinical choice, and the data suggest that it could be better to horizontally reconstruct no more than 3 mm of bone in order to reduce the number of complications and to obtain stable results. However, this technique remains difficult and requires expert surgeons.

Objectives: To evaluate the outcomes of bone regeneration using a customized titanium mesh scaffold to cover a bone graft for reconstruction of complex defects of the jaws. Materials and Methods: 19large defects were digitally reconstructed using CT scans according to the prosthetic requirements. A titanium mesh scaffold was designed to cover the bone (autologous/bovine bone particulate) graft. At least 6months after surgery, a new cone-beam CT was taken. The pre- and postoperative CT datasets were then converted into three-dimensional models and digitally aligned. The actual mesh position was compared to the virtual position to assess the reliability of the digital project. The reconstructed bone volumes (RBVs) were calculated according to the planned bone volumes (PBVs), outlining the areas under the mesh. These values were then correlated with the number of exposures, locations of atrophy, and virtually planned bone volume. Results: The mean matching value between the planned position of the mesh and the actual one was 82±13.4%. 52.3% (40% early and 60% late) exposures were observed, with 15.8% exhibiting infection. 26.3% resulted as failures. The amount of reconstructed bone volume (RBV) in respect to PBV was 65±40.5%, including failures, and 88.2±8.32% without considering the failures. The results of the exposure event were statistically significant (p=.006) in conditioning the bone volume regenerated. Conclusions: This study obtained up to 88% of bone regeneration in 74% of the cases. The failures encountered (26%) should underline the operator's expertise relevance in conditioning the final result.

Purpose: Dynamic navigation is a technique that allows for the placement of dental implants using a computer-guided approach according to preoperative planning. Its accuracy has been assessed in several previous studies. The purpose of this study was to summarize data on implant placement accuracy using dynamic navigation, to synthesize the frequency of intraoperative complications and implant failures, and to compare this technique with static computer-guided surgery and a freehand approach. Materials and methods: Electronic and manual literature searches until December 2019 were performed. The outcome variables were implant placement accuracy using dynamic navigation, accuracy differences between dynamic and static techniques and between dynamic and freehand techniques, intraoperative complications, and implant failures. Random-effects meta-analyses were performed. Results: A total of 32 studies were included; 29 reported accuracy values (2,756 implants), and 10 focused on complications and implant failures (1,039 implants). The pooled mean implant placement errors were 0.81 (95% CI: 0.677 to 0.943) mm at the entry point and 0.910 (95% CI: 0.770 to 1.049) mm at the apical point. The pooled mean vertical and angular deviations were 0.899 (95% CI: 0.721 to 1.078) mm and 3.807 (95% CI: 3.083 to 4.530) degrees. The navigation group showed significantly lower implant placement errors with respect to the freehand technique (P < .01) and similar accuracy values (P ≥ .05) compared with the static technique. The pooled prevalence of failures was 1% (95% CI: 0.00% to 2%). Conclusion: Dynamic navigation provided small implant placement errors, comparable with those obtained using static computer-guided surgery, and can be considered a more accurate technique than conventional freehand surgery.

New 3D digital technologies can be applied to implant-supported ear prostheses to restore anatomical structures damaged by cancer, dysplasia, or trauma. However, several factors influence the accuracy of implant positioning using a cranial template. This pilot study describes an innovative navigated flapless surgery for craniofacial implants, prosthetically guided by 3D planning of the ear prosthesis. Laser surface scanning of the face allowed for mapping of the healthy ear onto the defect site, and projection of the volume and position of the final prosthesis. The projected ear volume was superimposed on the skull bone image obtained by cone-beam computed tomography (CBCT), performed with the navigation system marker plate positioned in the patient's mouth. The craniofacial implants were fitted optimally to the ear prosthesis. After system calibration, real-time navigated implant placement based on the virtual planning was performed with minimally invasive flapless surgery under local anesthesia. After 3 months of healing, digital impressions of the implants were made, and the digital manufacturing workflow was completed to manufacture the ear prosthesis anchored to the craniofacial implants. The proposed digital method facilitated implant positioning during flapless surgery, improving the ear prosthesis manufacturing process and reducing operation time, patient morbidity, and related costs. This protocol avoids the need for a reference tool fixed in the cranial bone, as is usually required for maxillofacial surgery, and confirmed that surgical navigation is useful for guiding the insertion of craniofacial implants during flapless surgery.

Background: Artificial intelligence (AI) has taken hold in public health because more and more people are looking to make a diagnosis using technology that allows them to work faster and more accurately, reducing costs and the number of medical errors. Methods: In the present study, 120 panoramic X-rays (OPGs) were randomly selected from the Department of Oral and Maxillofacial Sciences of Sapienza University of Rome, Italy. The OPGs were acquired and analyzed using Apox, which takes a panoramic X-rayand automatically returns the dental formula, the presence of dental implants, prosthetic crowns, fillings and root remnants. A descriptive analysis was performed presenting the categorical variables as absolute and relative frequencies. Results: In total, the number of true positive (TP) values was 2.195 (19.06%); true negative (TN), 8.908 (77.34%); false positive (FP), 132 (1.15%); and false negative (FN), 283 (2.46%). The overall sensitivity was 0.89, while the overall specificity was 0.98. Conclusions: The present study shows the latest achievements in dentistry, analyzing the application and credibility of a new diagnostic method to improve the work of dentists and the patients’ care.

Background: Short implants (up to 5-mm long) have shown good results when compared to longer implants placed in augmented bone. Purpose: To evaluate if 4-mm ultrashort implants could also be an alternative to bone augmentation in the severely atrophic posterior jaws. The primary aim of the study was to compare implant survival rates between study groups. Materials and Methods: Eighty partially edentulous patients with posterior atrophic jaws (5–6 mm of bone above the mandibular canal and 4–5 mm below the maxillary sinus) were included: 40 patients in the maxilla and 40 in mandible. The patients were randomized to receive one to three 4-mm ultrashort implants or one to three implants at least 10-mm long in augmented bone. Results are reported 5 years after loading with the following outcome measures: implant and prosthetic failures, complications and peri-implant marginal bone level changes. Results: Thirty-two complications were reported for the control group in 18 patients versus 13 complications in 10 patients in the test group, the difference being not statistically significant (p= 0.103). In the augmented group, 12 implants failed in 6 patients versus 7 short implants in 6 cases, and 9 prostheses failed in the control group while 4 in the test one, without statistically significant differences (p= 1.000 and 0.363, respectively). At 5 years after loading, short implants lost on average 0.58 ± 0.40 mm of peri-implant marginal bone and long implants 0.99 ± 0.58 mm, the difference was statistically significant (p= 0.006). Conclusion: Four-millimeter ultrashort implants showed similar if not better results when compared to longer implants placed in augmented jaws 5 years after loading. For this reason, their use could be in specific cases preferable to bone augmentation since the treatment is less invasive, faster, cheaper and associated with less morbidity. However, longer follow-ups and larger trials are needed.

This study aimed to evaluate the production of customized composite veneers starting from a two-dimensional (2D) digital preview using the Digital Smile System (DSS). MATERIAL AND METHODS: A photographic examination of 30 patients was performed by taking two digital pictures of the face and a digital preview through the DSS. Moreover, optical scans of the dental arches were obtained and the data were entered into a three-dimensional (3D) software to prepare a virtual preview. The standard tessellation language files were sent for production using CAD-CAM technology. The Friedman test, Bonferroni, and Dunn post hoc tests were used, comparing the linear measurements of the 2D and 3D plans and the final veneers (α = .05).Significant differences emerged between the pictures and digital scans on the mesial-distal widths of the lateral incisors and canine. Linear measurements in the 2D plan were significantly different from those of the 3D plan, except for the height measures of incisors. No significant changes were found on comparing the parameters of the 2D and 3D plans with those of the final pieces.The customized veneers were clinically adequate and similar to 2D and 3D plans, although significant differences emerged between the picture and digital scans as well as between the 2D and 3D plans.

BACKGROUND To compare the accuracy of 3 different devices for facial images acquisition, useful for prosthodontic esthetic preview. METHODS Bidimensional extraoral photographs (Nikon D300), facial scans (Bellus3D) and 3D digital stereophotogrammetry photos (3dMD Face System) were acquired from 15 patients. The intraoral impressions of all subjects were digitally taken through a scanner (i500; Medit). Files obtained from each acquisition method were transferred on Exocad Software, and the measurements of the frontal teeth were performed and compared with those of the intraoral scans, assumed as reference. The data were statistically analyzed (Friedman and Dunn tests) with P

Medication-related osteonecrosis of the jaw (MRONJ) is an adverse drug reaction that occurs in a very different ways and affects patients with complex medical histories. The objective of this study is to evaluate the prognosis of surgically treated drug-related osteonecrotic lesions and to verify whether the platelet concentrates used during the surgical procedure can improve the prognosis.The study was performed by analyzing a sample of 64 patients with medication-related osteonecrosis of the maxillary bones, in which 79 lesions were diagnosed and surgically treated at the S. Orsola-Malpighi Polyclinic in Bologna. The lesions treated with PRP showed a lower tendency to relapse compared to its non-use, the probability of recurrence. In conclusion, this study demonstrates that treatment with PRP may have positive effects in the therapy of Medication-Related Osteonecrosis of the Jaw (MRONJ).

Objectives: The use of digital devices is strongly influencing the dental rehabilitation workflow both for single-crown rehabilitation and for full-arch prosthetic treatments. Methods: In this study, trueness was analyzed by overlapping the scan dataset made with Medit I-500 (by using two different tips and two different scan strategies) with the scan dataset made with lab scanning, and the values of the (90°–10°)/2 method were reported. Precision was evaluated by using the same values of trueness coming from the intra-group overlapping (scan dataset made with an IOS overlapped and compared to each other). Moreover, two different software programs of overlapping were used to calculate accuracy values. Results: The mean difference of trueness was 26.61 ± 5.07 µm with the suggested strategy of intraoral scanning and using a new design of the tip, 37.99 ± 4.94 µm with the suggested strategy of intraoral scanning and using the old design of the tip, and 51.22 ± 6.57 µm with a new strategy of intraoral scanning and using the old design of the tip. The mean difference of precision was 23.57 ± 5.77 µm with the suggested strategy of intraoral scanning and using a new design of the tip, 38.34 ± 11.39 µm with the suggested strategy of intraoral scanning and using the old design of the tip, and 46.93 ± 7.15 µm with a new strategy of intraoral scanning and using the old design of the tip. No difference was found in the trueness and precision data extracted using the two different programs of superimposition Geomagic Control X and Medit Compare. Conclusions: The outcomes of this study showed that the latest version of I-Medit 500 with the use of a new tip seems to be promising in terms of accuracy when a full arch needs to be scanned. Moreover, Medit Compare, which is an application of Medit IOS software, can be used to calculate IOS accuracy.

Aim: Most of the intra- and postoperative patient discomfort related to complex mandibular third molar (M3M) extraction is proportional to the invasiveness of the surgery. This can be minimized through the support of dynamic navigation (DN) technology, which can be successfully applied in dental implantology. Material s and methods: Three patients, one female (aged 25 years) and two males (aged 18 and 51 years, respectively) underwent the DN-supported extraction of partially impacted M3Ms with a flapless approach that required minimal bone removal. The patients' discomfort and the speed of recovery were considered to be proof of the quality of the adopted procedure. Results: No postoperative discomfort such as pain or swelling was recorded in the immediate postoperative period, and no complications were reported within a month of the surgery. No medications were prescribed. The procedure lasted no longer than 20 min in all cases. Conclusion: Using DN technology, the real-time 3D monitoring of the clinical situation in each surgical phase enabled the surgeon to avoid soft tissue detachment as well as limit bone loss and intraoperative bleeding, thanks to a precise multi--section of the tooth and important nearby anatomical structures, respectively.

Zygomatic implant rehabilitation is a challenging procedure that requires an accurate prosthetic and implant plan. The aim of this study was to evaluate the malar bone available for three-dimensional zygomatic implant placement on the possible trajectories exhibiting optimal occlusal emergence. After a preliminary analysis on 30 computed tomography (CT) scans of dentate patients to identify the ideal implant emergencies, we used 80 CT scans of edentulous patients to create two sagittal planes representing the possible trajectories of the anterior and posterior zygomatic implants. These planes were rotated clockwise on the ideal emergence points and three different hypothetical implant trajectories per zygoma were drawn for each slice. Then, the engageable malar bone and intra- and extra-sinus paths were measured. It was possible to identify the ideal implant emergences via anatomical landmarks with a high predictability. Significant differences were evident between males and females, between implants featuring anterior and those featuring posterior emergences, and between the different trajectories. The use of internal trajectories provided better bone engagement but required a higher intra-sinus path. A significant association was found between higher intra-sinus paths and lower crestal bone heights.

Aim: the aim of this in vitro study was to test whether the implant placement accuracy and the operating time can be influenced by the operator&rsquo, s experience. Materials and methods: sixteen models underwent a (Cone Beam Computer Tomography) CBCT and implant positioning was digitally planned on this. The models were randomly assigned to four operators with different levels of surgical experience. One hundred and twelve implant sites were drilled using a dynamic navigation system and operating times were measured. Based on postoperative CBCTs, dental implants were virtually inserted and superimposed over the planned ones. Two-dimensional and 3D deviations between planned and virtually inserted implants were measured at the entry point and at the apical point. Angular and vertical errors were also calculated. Results: considering coronal and apical 3D deviations, no statistically significant differences were found between the four operators (p = 0.27, p = 0.06). Some vectorial components of the deviation at the apical point and the angular errors of some operators differed from each other. Conclusions: within the limitations of this study, dynamic navigation can be considered a reliable technique both for experienced and novice clinicians.

Nowadays dynamic computer-based image navigation has become ordinary for hospital-based [...]

Background Dental rehabilitation with conventional prostheses after microvascular jaw reconstruction is often unsuccessful because of the altered oral anatomy and the lack of adequate dentition for fixation. Purpose This retrospective study evaluated the long-term outcomes of patients who underwent jaws reconstruction with a fibula free flap and subsequent rehabilitation with implant-supported prostheses. Materials and methods In total, 21 patients were enrolled; 108 osseointegrated dental implants, positioned on 21 fibular free flaps were assessed. Follow-up examinations were performed according to a standardized protocol, including clinical and radiological evaluations. The mean follow-up after implant insertion was 90.2 (range, 20-204) months. Results The overall implant survival rate was 97.2% at the 12-month follow-up, 86.5% at 60 months, and 79.3% at 120 months. The rate of overall implant success was 95.4% at the 12-month follow-up, 73.5% at 60 months, and 64.7% at 120 months. Implant failure was more common in patients that had implants placed after they underwent radiation therapy. Peri-implantitis and mucositis were identified in 14.8% and 20.3% of surviving implants, respectively, at the 5- and 10-year follow-up. The risk of developing peri-implantitis was estimated to be higher (odds ratio = 1.5) for patients without connective tissue or skin grafts versus patients with one of them (18.2% vs 9.5%). Conclusions Long-term implant-related outcomes show that the survival rate of implants placed into the fibula is acceptable. Radiotherapy negatively impacts survival and success, in particular in the short and medium-term follow-up. Moreover, a relevant peri-implant bone resorption does occur over time and ultimately influences implants success, and it is mainly related to peri-implant gingival mucositis. In this regard skin or connective tissue grafts seem to offer an aid to manage this problem.

Dynamic navigation (DN) is a computer-guided technique employed in different surgical fields and recently adopted in dental implantology to improve the accuracy of dental implant insertion. Medication-related osteonecrosis of the jaws (MRONJ) often requires the surgical removal of the impaired, hard tissue, trying at the same time to spare the healthy tissue and the noble anatomical structures. A case of extensive bilateral medication-related osteonecrosis, with the symptomatic involvement of the right mandibular canal, was successfully resolved with the use of ultrasonic surgery associated with a dynamic navigation, in order to limit the invasiveness of the surgical approach improving its reliability and accuracy. The usefulness of this technology in the management of MRONJ can be considered in future clinical trials to confirm the advantages and standardize the technique.

The aim of this study was to evaluate the survival and clinical success rate, complications, and patients&rsquo, quality of life after computer-aided rehabilitation supported by zygomatic implants in cases of severe maxillary atrophy (ten patients) and in bone defects in oncologic patients (ten patients). All patients underwent computer-aided planning and surgery. Seventy-three zygomatic implants were placed. The mean follow-up period was 39.9 months. Implant survival and clinical success rate, the effectiveness of planning the implant length, biological and prosthetic complications, and the quality of life were evaluated. The five-year implant survival rate for patients with maxillary atrophy and oncologic patients was 97.4% and 96.7%, respectively. The prosthetic survival rate was 100%. Two implant failures occurred in the first year. One implant failure was observed in each group. Minor biological and prosthetic complications occurred in both groups without significant differences. All complications were managed without affecting the treatment. The quality of life increased by 71.3% in the atrophic group and by 82.9% in the oncologic group. Zygomatic implant rehabilitation seems to be a reliable technique for patients with maxillary atrophy and for oncologic patients. The three-dimensional computer-aided approach allows the surgeon to plan the surgery and increase its predictability. Early prosthesis loading certainly allows for better functional outcomes.