Search

International audience; The production of useful and high-quality nuclear data requires measurements with high precision and extensive information on uncertainties and possible correlations. Analytical treatment of uncertainty propagation can become very tedious when dealing with a high number of parameters. Even worse, the production of a covariance matrix, usually needed in the evaluation process, will require lenghty and error-prone formulas. To work around these issues, we propose using random sampling techniques in the data analysis to obtain final values, uncertainties and covariances and for analyzing the sensitivity of the results to key parameters. We demonstrate this by one full analysis, one partial analysis and an analysis of the sensitivity to branching ratios in the case of (n,n’γ) cross section measurements.

International audience; The necessary improvement of evaluated nuclear data for nuclear applications development is possible through new and high-quality measurements, often combined with appropriate nuclear-reaction modelling. In particular, improving inelastic cross-section evaluations requires new and high-quality data. We measure (n, n’γ) cross-sections using prompt γ-ray spectroscopy and neutron energy determination by time-of-flight. To extract, from these partial data, the total inelastic cross-section, we rely on theoretical model as well as nuclear structure data such as γ ray emission probabilities. This structure information, tabulated in databases, comes with uncertainty. This directly affects the precision of our results, regardless of how good the measurement is. In this paper, we will present the issue of limited precision structure data and its impact on nuclear reaction data quality in the case of neutron inelastic scattering measurements. We will also discuss how to foresee and mitigate the issue.

To probe the neutron inelastic scattering off 232Th, an experiment took place at the EC-JRC Geel conducted with the experimental setup GRAPhEME to detect emitted γ-rays. The prompt γ-ray spectroscopy method was used and 70 experimental 232Th(n, n’γ) cross sections were obtained from the experimental data. Combining these cross sections, nuclear-structure data available in databases and hypotheses to complete the latter, neutron inelastic level production cross sections in 232Th and the total inelastic cross section were calculated. For the first time, the total inelastic cross section of an actinide nucleus was derived on the total neutron energy range from experimental data only. Comparisons of (n, n’) cross section data with evaluated data reveal a good agreement between them all above 300 keV of neutron energy. TALYS calculations are compatible but lower than the evaluated data.

GAINS (Gamma Array for Inelastic Neutron Scattering), currently installed at the GELINA (Geel Electron Linear Accelerator) neutron source of the EC-JRC (European Commission-Joint Research Centre), is one of the best instruments available worldwide for measuring high resolution, low uncertainty neutron inelastic cross-section data relevant for both fundamental research and nuclear physics applications (like Generation IV facilities). It features 12 HPGe detectors coupled with a 235U fission chamber for neutron flux monitoring. The paper presents a short history of the GAINS development over the years and reviews some of the main experimental results together with plans for future experiments.

A high-and-flat efficiency moderated neutron detection array of 3He counters has been recently developed for photoneutron cross section measurements at the future ELI-NP gamma-ray beam source. We have designed a three rings geometry of 31 counters with a ˜37% efficiency flat within 5% in the 10 keV to 5 MeV neutron energy interval. A commissioning experiment was performed using proton beams delivered by the 9 MV Tandem accelerator of IFIN-HH. We measured the neutron production cross sections for proton induced reactions on nat Cu and 27Al. The (p, xn) reactions on nat Cu were investigated in the 4.5 MeV to 14 MeV proton energy range with 250 keV steps, using pulsed and continuous proton beams. The low energy measurements below 10 MeV served to validate the detection efficiency calibration against well-known natCu(p, n) cross sections. The 27Al(p, n) reaction was investigated in the 5.8 MeV to 6.75 MeV energy range with 5 keV steps. Preliminary cross section results are here compared with preceding data.

GRAPhEME is a γ-spectrometer developed by CNRS/IPHC Strasbourg (France), in collaboration with EC-JRC Geel (Belgium) and IFIN-HH Bucharest (Romania). With its 6 High Purity Planar Germanium detectors and one fission chamber, GRAPhEME, installed at the EC-JRC GELINA facility, was optimized for measurements of accurate (n, xnγ) cross sections on actinides. The experimental methodology is based on the prompt γ-ray spectroscopy coupled to time-of-flight measurements. In this paper, we present an overview of fifteen years of experiments with GRAPhEME at EC-JRC GELINA facility, illustrated by main achievements to highlight the performances reached by our spectrometer. Beyond the experimental work, a close collaboration with theoreticians has emerged allowing the use of the data produced with GRAPhEME to test and constraint nuclear reaction codes like TALYS, CoH and EMPIRE. In a near future, GRAPhEME will be available to start measurement campaigns at the new neutron beam facility SPIRAL2/NFS. There, studies of (n, 2n) and (n, 3n) reactions will be possible and will complete the work done at EC-JRC GELINA on (n, n ) reactions. Despite the amount of cross section data provided by GRAPhEME up to now, the prompt γ-ray spectroscopy method presents some weaknesses that our collaboration tries to overcome. This goes through new calculation schemes based on theoretical modeling constrained on experimental data to infer the total (n, xn) cross section, new instrument to measure conversion electrons but also by being proactive in dissemination activities to make the nuclear structure community aware of our needs about new accurate nuclear structure information on actinides.

This paper reports partial results of a (n, n’γ) measurement on nickel. The inelastic channel was measured using the Gamma Array for Inelastic Neutron Scattering (GAINS) spectrometer at the 100-m measurement cabin of the Geel Electron Linear Accelerator (GELINA) neutron source of the European Commission’s Joint Research Centre (EC-JRC) in Geel, Belgium. Using γ spectroscopy, we were able to extract angle-integrated production cross sections for several γ rays but we report here only the results for the main transition in 58Ni. We discuss however in detail the observed discrepancy between our data and other experiments (especially the work of Voss et al.). We also shortly comment on the quality of the neutron-target optical model potential in describing the inelastic data in this mass region. The calculations were performed using the talys 1.9 code in the default settings.

The extended dataset of 56Fe(n,n’γ) cross sections measured by our group more than a decade ago at GELINA (Geel Linear Accelerator) was used in many recent evaluations like ENDF, JEFF and CIELO. Despite the special measures we took to ensure reliability and accuracy, concerns were raised by various groups with regard to several features of this dataset (absolute normalization and/or shape) and therefore the 56Fe(n,inl) cross section is still under the evaluation by the International Nuclear Data Evaluation Network (INDEN). Consequently, a new experiment is now under preparation aiming to take advantage of the numerous experimental improvements of the GAINS (Gamma Array for Inelastic Neutron Scattering) setup implemented over the years. While γ spectroscopy combined with the time-of-flight method will remain the main technique involved, several other experimental details will differ substantially.

International audience; The evaluated data are presented for 11 known A=218 nulcides (Pb, Bi, Po, At, Rn, Fr, Ra, Ac, Th, Pa and U). For 218 Pb, 218 Bi, 218 At and 218 Pa, data are available only for the ground states. For 218 U, only the g.s. and a high-spin isomer are known, with no data on γ -ray transitions available. For 218 Po, ten excited states are known from 218 Bi decay, with no knowledge on the multipolarities of gamma-ray transitions. For 218 Th, five excited states in the g.s. band are known from an in-beam γ -ray study. Data on level half-lives, multipolarities and mixing ratios of gamma transitions is generally lacking for A=218 nuclei. The static magnetic dipole moment has been measured for only an isomer in 218 Fr. With the exception of a new nuclide, 218 Pb, and measurements of half-lives of ground states of a few nuclides of A=218 and A=222, no substantial structure information has become available since the previous evaluation in 2006. Q values are adopted from 2017Wa10 (AME-2016). The present evaluation supersedes the previous A=218 ENSDF evaluations, 2006Ja03, 1995El08, 1987El12 and 1977To13. This evaluation was carried out as part of a joint IAEA-ICTP workshop for Nuclear Structure and Decay Data, organized and hosted by the IAEA, Vienna, and ICTP, Trieste, October 15–26, 2018.

A neutron inelastic scattering experiment was performed at the GELINA (Geel Electron LINear Accelerator) neutron source of the European Commission Joint Research Centre Geel (EC-JRC Geel) with the aim of determining the reaction cross sections for the stable isotopes of natural titanium. A 235U fission chamber was used to monitor neutrons with energies up to 20 MeV. The GAINS (Gamma Array for Inelastic Neutron Scattering) spectrometer was employed to detect the γ rays resulting from the decay of the excited nuclei. We determined the γ-ray production cross sections of the first transitions in the 46,48,49,50Ti isotopes. The experimental values were compared with previous reported results and also with theoretical calculations performed with the TALYS 1.8 code using the default input parameters. Uncertainties of around 5% were obtained for the strongest observed transitions.